Database Develop

8125 Rainbow Screen

I have an 8125 that I can't seem to get off of the RUU screen. It shows IPL 2.25.0001 and SPL 2.25.0001. Every time I try to use the HTC software update it reaches 95% and then errors out. Any idea how I can get this phone working again?
Thanks,
T

you have a G4 wizard, you need to install the wizard love rom. I believe if you read around, you may be able to find out where to find it. Also read some info about unlocking your CID and SIM for a G4 Wizard.
t_matheus said:
I have an 8125 that I can't seem to get off of the RUU screen. It shows IPL 2.25.0001 and SPL 2.25.0001. Every time I try to use the HTC software update it reaches 95% and then errors out. Any idea how I can get this phone working again?
Thanks,
T
Click to expand...
Click to collapse

I found this in another thread, try it.
--------------------------------------------------------------------------------
Hi there,
If you ever happen to get stuck in the IPL / SPL screen, try the following (it happened to me and I almost got a heart attack...):
"If your device doen't boot after flash procedure with my shelltool you should
1) Hold "Camera" while short pressing the "reset" button. Your device will enter in bootloader mode. You will se 3 stripes.
2) You should connect your usb cable to your device and pc and run RUU and flash this rom.
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
3) read my instruction once more and repeat all step by step. its very important!!"
[I've edited the download link for the love rar, the original one on the ftp server was deleted]
t_matheus said:
I have an 8125 that I can't seem to get off of the RUU screen. It shows IPL 2.25.0001 and SPL 2.25.0001. Every time I try to use the HTC software update it reaches 95% and then errors out. Any idea how I can get this phone working again?
Thanks,
T
Click to expand...
Click to collapse

Suggestion.
Go to IMEI Check, buy the unlock and have fun upgrading and downgrading your ROM.
It cost you some money but you can restore your device without to much trouble.
Best regards.

golfernutnflorida said:
I found this in another thread, try it.
--------------------------------------------------------------------------------
Hi there,
If you ever happen to get stuck in the IPL / SPL screen, try the following (it happened to me and I almost got a heart attack...):
"If your device doen't boot after flash procedure with my shelltool you should
1) Hold "Camera" while short pressing the "reset" button. Your device will enter in bootloader mode. You will se 3 stripes.
2) You should connect your usb cable to your device and pc and run RUU and flash this rom.
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
3) read my instruction once more and repeat all step by step. its very important!!"
[I've edited the download link for the love rar, the original one on the ftp server was deleted]
Click to expand...
Click to collapse
I have a 8125 as well and just run the wizard love as above and you will be back in business. As for unlocking you can use latest lokiwiz for free as posted in the forums.

cybercub said:
I have a 8125 as well and just run the wizard love as above and you will be back in business. As for unlocking you can use latest lokiwiz for free as posted in the forums.
Click to expand...
Click to collapse
You can only unlock a G3 Wizard like that. G4's are different and have to be unlocked via imei check. The OP has a G4 based on their IPL/SPL they posted.

I can't seem to get my hands on this file. I've tried several places but no joy. Any thoughts on where I can lay my hands on the Wizard_Love ROM?
Thanks,
T
golfernutnflorida said:
I found this in another thread, try it.
--------------------------------------------------------------------------------
Hi there,
If you ever happen to get stuck in the IPL / SPL screen, try the following (it happened to me and I almost got a heart attack...):
"If your device doen't boot after flash procedure with my shelltool you should
1) Hold "Camera" while short pressing the "reset" button. Your device will enter in bootloader mode. You will se 3 stripes.
2) You should connect your usb cable to your device and pc and run RUU and flash this rom.
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
3) read my instruction once more and repeat all step by step. its very important!!"
[I've edited the download link for the love rar, the original one on the ftp server was deleted]
Click to expand...
Click to collapse

t_matheus said:
I can't seem to get my hands on this file. I've tried several places but no joy. Any thoughts on where I can lay my hands on the Wizard_Love ROM?
Thanks,
T
Click to expand...
Click to collapse
I was able to pull it from RapidShare in the link that you provided. Its also seeded on PirateBay if you prefer the Torrent method...

mfrazzz said:
I was able to pull it from RapidShare in the link that you provided. Its also seeded on PirateBay if you prefer the Torrent method...
Click to expand...
Click to collapse
Got it and now the phone is working again!
So do I need to unlock the phone and install another ROM or will it work fine with this ROM?
Thanks, again for all your help!
T

Based on your original post, you have a G4 Wizard. You can't do the standard unlock like the stickies from Dr. P and Faria describe. You have to use the other sticky for installing roms with a CID locked phone. Your other option is to go to Imei Check and do their unlock (will cost about USD 40). Its all online (you give them your IMEI and some other info with your payment and then they send you the files to do the unlock). But even then, you still have to use G4 roms (so you need to be careful or you'll be back in this situation or worse).
BTW:I've never messed with a G4 Wizard so I'm only stating what I've read. Go read and re-read the CID Locked install procedure in the stickies to learn more.

upgrade didn't work

i tried several times like described here http://forum.xda-developers.com/showthread.php?t=285435
but always when i want to downgrade my rom with the mentioned button 1.05 rom it went till 98% an then my wizard didnt do anything until i reboot it.
with the standard o2 rom i have the lokiwiz didnt work. but what could be the fault ? what can i try to get it work ?

peran281 said:
i tried several times like described here http://forum.xda-developers.com/showthread.php?t=285435
but always when i want to downgrade my rom with the mentioned button 1.05 rom it went till 98% an then my wizard didnt do anything until i reboot it.
with the standard o2 rom i have the lokiwiz didnt work. but what could be the fault ? what can i try to get it work ?
Click to expand...
Click to collapse
Who knows, you didn't tell anything useful about your phone or what ROMs or anything else. Try the link in my sig. Read it, do ALL the steps, if you think you can skip something--don't, if "it doesn't work"--then you didn't follow all the steps.
Best of luck,
--M

peran281 said:
it went till 98% an then my wizard didnt do anything until i reboot it.
Click to expand...
Click to collapse
I think this may be part of the problem... How long did you wait? All roms stall at some point and can stall for like 5 mins (sometimes more). Don't do ANYTHING, unless your PC gets an error. Its still working. If it sits for more than 10 mins then you probably do have a problem, but it can sit for what seems like forever sometimes. Just be patient.

If it sits for more than 10 mins then you probably do have a problem
Click to expand...
Click to collapse
i tried it several times and i always had to wait about 20 - 30 minutes and always the same result being hung up at 98%.
about your phone or what ROMs
Click to expand...
Click to collapse
here i have some data. i have
ipl/spl: 2.21(o2 ger rom)
gsm : 02.19.11 (o2 ger rom)
os:2.21.4.3 (o2 ger rom)
i hope that is all the important info u need.
i'll try the link from demontefixo and let u know if it work.

Tried flashing on anther pc yet? For most people with this kind of problem that's the solution.

Tried flashing on anther pc yet?
Click to expand...
Click to collapse
i have 2 pcs and 1 laptop and i used all of them one time.

i used now this installationhttp://forum.xda-developers.com/showthread.php?t=298613
and it stucked on step G3.4 when i want to flash the wizard_love rom with this error:
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
what did i do wrong? i followed step by step like demontefixo said for 3 times.

peran281 said:
i used now this installationhttp://forum.xda-developers.com/showthread.php?t=298613
and it stucked on step G3.4 when i want to flash the wizard_love rom with this error:
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
what did i do wrong? i followed step by step like demontefixo said for 3 times.
Click to expand...
Click to collapse
This is an error that you can get on G4 devices. What are you doing in step G3.4? Read G4.6!

but in the tutorial http://forum.xda-developers.com/showthread.php?t=298613
is described how to determine the wizard type and my ipl/spl is 2.21 and thats G3 device.

peran281 said:
i used now this installationhttp://forum.xda-developers.com/showthread.php?t=298613
and it stucked on step G3.4 when i want to flash the wizard_love rom with this error:
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
what did i do wrong? i followed step by step like demontefixo said for 3 times.
Click to expand...
Click to collapse
That error indicates you aren't CID Unlocked. Is your phone booting now? or are you at the bootloader (rainbow) screen? If you are at the bootloader, then flash your official rom to get a working device. Once you have a working device, then go to step G3.6 and do the CID Unlock procedure.
ALso remove your SD card while you are doing all of this until you get it CID Unlocked and onto the TMobile 2.26 official rom (G3.8).
AND yes, you have a G3, so you don't (and shouldn't) be in the G4.x steps.

i want to downgrade my rom with the mentioned button 1.05 rom it went till 98% an then my wizard didnt do anything
Click to expand...
Click to collapse
yes but thats my problem. i tried it like described here http://forum.xda-developers.com/showthread.php?t=285435
and always the same problem. is there another way to cid unlock the device ?

peran281 said:
yes but thats my problem. i tried it like described here http://forum.xda-developers.com/showthread.php?t=285435
and always the same problem. is there another way to cid unlock the device ?
Click to expand...
Click to collapse
This is my last post for the day as I can't handle anymore of this (its not just you peran, but the other half dozen posts I've read in the last hour or so where people just aren't following the instructions they are given. These methods are tried and true, and they work. And yes, this is the way to CID Unlock your phone unless you pay to have it done)... In a previous post to you, it was stated you had to get back to an official rom first. Have you done this (your replies indicate you just continue to do other roms)? You need to get the latest rom from your carrier and get your device working again. Get it all charged up, pull out your SD card, then try flashing back to the button rom (I would also suggest you try pulling the button rom down again in case there is something wrong with your previous download of it).
Its the weekend, I'm going to go enjoy the spring weather

i did it like u suggested mfrazzz. i know that my phone isnt CID unlocked. but that is my problem. i read the mentioned article x-times and did it like described but the problem is : when i downgrade to button 1.05 rom then my pda stuck at 98% and i get the message from the update program on my pc that the downgrade was successful. but it isn't. why? till this step u cant do much wrong i think... :-(

Have you flashed back to the official rom from your carrier? Until you do that and get your device back working there is no point in trying to continue to flash the button rom (or any other rom). You have to get back to your carrier's official rom first. None of your posts indicate you have done that.

with the standard o2 rom
Click to expand...
Click to collapse
i always went back to the official rom from my provider and this always works perfectly. i tried it today again but always the same stucking at 98%.
i did it STEP BY STEP but it didnt work.
is there another rom i can use than button 1.05 ?

Is there no other rom then the one from button to downgrade my ipl/spl to 1.xx ?
please help.

I'm not aware of another one.
You might want to try this thread (I know its not the same issue, but might be worth trying to see if it makes a difference)
http://forum.xda-developers.com/showthread.php?t=294107

You might want to try this thread (I know its not the same issue, but might be worth trying to see if it makes a difference)
http://forum.xda-developers.com/showthread.php?t=294107
Click to expand...
Click to collapse
I tried it but it didnt help.
now i used Xelecin's 1.08 rom and this one worked. then i used lokiwiz and it was successful. but then i flashed the tmobile 2.26 rom and this worked but i couldnt use my sim-card any more. always when i insert my pin it said unknown sim and then crashes. i thought i sim-unlocked the wizard? another problem was when i want to flash the official o2 rom it said unknown vendor id...but i used before lokiwiz and there were no errors...and the last question, i know there are many now, where do i insert the sim-code i got from lokiwiz?
i hope someone have some answers...thx before

Please HELP ME!! upgrade from bootloader

Hello, I've tried to upgrade my Qtek 9100 G3, the flashing finishing with success, but when I start the phone it doesn't load windows, I can see the splash screen, and then the screen become completely white.
I follow the faria instruction, and tried to install the wizard love ROM from bootloader screen, but I have error 300, "Strumento di aggiornamento non valido" that in english mean Update device not good..
Please, help me!!

finger roll said:
Hello, I've tried to upgrade my Qtek 9100 G3, the flashing finishing with success, but when I start the phone it doesn't load windows, I can see the splash screen, and then the screen become completely white.
I follow the faria instruction, and tried to install the wizard love ROM from bootloader screen, but I have error 300, "Strumento di aggiornamento non valido" that in english mean Update device not good..
Please, help me!!
Click to expand...
Click to collapse
1.- I don´t think you have a G3 because de IPL/SPL you posted, but is very strange that Wizard Love RUU reported such error in a G4
2.- What kind of upgrade you wanted to do?
3.- Reflash your original ROM if you have it available.

Mod edit: Please refer him to the wiki before posting such information.

Yes, I have a G4 phone, you can see on my sign, but my friend with the phone broken have a G3, and now he can install any kind of rom, the important it's that it works.

So.... problem solved?
finger roll said:
Yes, I have a G4 phone, you can see on my sign, but my friend with the phone broken have a G3, and now he can install any kind of rom, the important it's that it works.
Click to expand...
Click to collapse
Good for him! And how did he recover his phone? What did your friend do?

No he don't solved the problem, with any kind of ROM he's tring to install he get the same problem "error 300": invalid upgrade Tool!!
Please, do you have any idea?

Madcap180 said:
he has a G3 .. 2.17 I beleive is G3... Anything above 2.21 is G4 I beleive.
Click to expand...
Click to collapse
This is WRONG... PLEASE Don't post information like this unless you are positive of what you are saying as this could cause people to brick their phones.
Its explained in numerous places how to determine this, but this post is one of the best for overall information on determining your phone type and how to flash and recover from flash issues:
http://forum.xda-developers.com/showthread.php?t=298613

Madcap180 said:
he has a G3 .. 2.17 I beleive is G3... Anything above 2.21 is G4 I beleive.
Click to expand...
Click to collapse
Mine is a G4 (2.25.001) The trailing 0001 is what so far has identified a G4

when I was first trying to flash my phone I read anything 2.21 and above was a G4... so perhaps I READ the wrong information.

I got lost buddy
finger roll said:
No he don't solved the problem, with any kind of ROM he's tring to install he get the same problem "error 300": invalid upgrade Tool!!
Please, do you have any idea?
Click to expand...
Click to collapse
Could you provide the specifics of your friend´s phone?
* IPL / SPL (Current and original)
* Original ROM
* What ROM he was flashing when he got for the first time the white screen?

mfrazzz said:
This is WRONG... PLEASE Don't post information like this unless you are positive of what you are saying as this could cause people to brick their phones.
Its explained in numerous places how to determine this, but this post is one of the best for overall information on determining your phone type and how to flash and recover from flash issues:
http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse
The brick phone is a G3 with 2.26 IPL and SPL, from the T-mobile ROM. He brick the phone installing the prekitchen ROM from Faria.
Now Following the faria instruction, he would like to flash with wizard love rom, but he get the wrong update tool error. Did you know if there are some other possible solution?
In booloader mode, when I connect to the usb, in the phone screen appear USB, so I think that the phone it's not completely gone.

finger roll said:
The brick phone is a G3 with 2.26 IPL and SPL, from the T-mobile ROM. He brick the phone installing the prekitchen ROM from Faria.
Now Following the faria instruction, he would like to flash with wizard love rom, but he get the wrong update tool error. Did you know if there are some other possible solution?
In booloader mode, when I connect to the usb, in the phone screen appear USB, so I think that the phone it's not completely gone.
Click to expand...
Click to collapse
You´re right, if you have the tricolor screen and USB connection you´re safe, no worries!!! We can save it!
Have you tried the original T-Mobile? This one should do it, if you don´t succeed with the original ROM you may try Wizard Love but you have to use the right RUU, in this case pull de nk.nbf file from the Wizard Love and put it into the folder were the original T-Mobile RUU is (this would replace the original T-Mobile nk.nbf with the one from Wizard Love), then execute the original T-Mobile RUU with the new nk.nbf of course your Wizard connected to the PC, remove miniSD card (if any) and make sure you dissable the activesync connection
If my explanation sounds confussing for you, check this:
http://forum.xda-developers.com/showthread.php?t=294107
Good luck!

Thanks, I downloaded the T-mobile ROM, insert the love ROM nk.nbf and tried to upgrade...I get this error message:
Error 238: File Read
So, I extract the T-mobile, and launch the RUU directly, using the t-mobile nk.nbf, and not the wizard love one.
Now I'm flashing!!!!

Good for you!
finger roll said:
Thanks, I downloaded the T-mobile ROM, insert the love ROM nk.nbf and tried to upgrade...I get this error message:
Error 238: File Read
So, I extract the T-mobile, and launch the RUU directly, using the t-mobile nk.nbf, and not the wizard love one.
Now I'm flashing!!!!
Click to expand...
Click to collapse
Excelent!! I´m glad you had fix the problem!

[Walkthrough] How to fix your bricked phone

So, you've decided that your shiny new toy isn't very well setup by default. You flashed a ROM and lo and behold, you missed some instruction somewhere and now you think it's bricked.
Here's the good news:
It's not bricked!!
Bricked means that it's dead and it's in no way or shape recoverable.
There is still a chance. (As long as you didn't try to hardSPL with another Device's SPL...)
All you have to do is:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
I'll put in links for those who can't find them...
Here's tmobile's ROM.

WOW! That´s all??
Ok - then provide us a link to a XDA Terra RUU!!!!!!
hahahaha. Thanks for this help. Maby for some people it is usefull - but written 1000 times before.
ivanmmj said:
So, you've decided that your shiny new toy isn't very well setup by default. You flashed a ROM and lo and behold, you missed some instruction somewhere and now you think it's bricked.
Here's the good news:
It's not bricked!!
Bricked means that it's dead and it's in no way or shape recoverable.
There is still a chance. (As long as you didn't try to hardSPL with another Device's SPL...)
All you have to do is:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
I'll put in links for those who can't find them...
Click to expand...
Click to collapse

papamopps said:
WOW! That´s all??
Ok - then provide us a link to a XDA Terra RUU!!!!!!
hahahaha. Thanks for this help. Maby for some people it is usefull - but written 1000 times before.
Click to expand...
Click to collapse
I know it has been stated a million times. I'm just tired of the same question being asked over and over again and so here we are...

Too bad it'll be stated a million more times afterwards too.

falconeyez said:
Too bad it'll be stated a million more times afterwards too.
Click to expand...
Click to collapse
If we sticky it and threatened their lives if they don't read it... lol

ivanmmj said:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
Click to expand...
Click to collapse
It will not help!

ASerg said:
It will not help!
Click to expand...
Click to collapse
And we hold their pet's hostage?

ivanmmj said:
And we hold their pet's hostage?
Click to expand...
Click to collapse
Or better yet, tell them to send us their phones, then we "unbrick" them and sell them on eBay.

falconeyez said:
Or better yet, tell them to send us their phones, then we "unbrick" them and sell them on eBay.
Click to expand...
Click to collapse
Might work out, I get 10% of the over all sold
Ghostrider

Ghostrider said:
Might work out, I get 10% of the over all sold
Ghostrider
Click to expand...
Click to collapse
Fine, but I get 15% because it's my thread.

The instructions to do this are actually in my newbie thread. Which is a sticky.

TylerC161 said:
The instructions to do this are actually in my newbie thread. Which is a sticky.
Click to expand...
Click to collapse
I know, but most people don't search. I figured, maybe if it says "How to fix your bricked phone" on the title, they might get the idea.
It was actually done mostly as a joke...

help
I used the hardSPL from this thread..
http://forum.xda-developers.com/showthread.php?t=358225
It worked successfully and I was able to restart into WM6. Then I tried loading the TouchIT 4.4 and it installed cleanly with no errors. But when I went to restart it, my Wing just sits there at the CanonYang boot screen and never changes.
I tried using the steps here to restore the tmo default rom, but it after 1% on the progress bar, the screen goes blank and the CanonYang screen comes back. Is there anything I can do?
edit: I can get to the bootloader screen with the color bars. I'm not sure if this additional info will be of any help.
IPL 4.10.0002
SPL 4.70.Yang

gumbico said:
I used the hardSPL from this thread..
http://forum.xda-developers.com/showthread.php?t=358225
It worked successfully and I was able to restart into WM6. Then I tried loading the TouchIT 4.4 and it installed cleanly with no errors. But when I went to restart it, my Wing just sits there at the CanonYang boot screen and never changes.
I tried using the steps here to restore the tmo default rom, but it after 1% on the progress bar, the screen goes blank and the CanonYang screen comes back. Is there anything I can do?
edit: I can get to the bootloader screen with the color bars. I'm not sure if this additional info will be of any help.
IPL 4.10.0002
SPL 4.70.Yang
Click to expand...
Click to collapse
SPL 4.70.yang!!! your device is HARD-SPL!!
So going back to stockrom--> delete the SPL.nbh from EVERY RUU you are running.
Then it shouldn´t stop......

Big Thanks papa! That did the trick. My Wing is happy once again and running Open Touch. But I still want to give TouchIt another try.

And what if i cant find stock RUU mine came with some arabic keyboard and spl was 1.08 , thanks to Oli he didnt mention that SPL should be 4 or higher , so device is bricked since first Olis release and no way to find this arabic stock RUU.
Any Help ?????
Hitec

If the device had an spl of 1.08 prior to HardSPLing it, then you'll have to bring the device to your nearest repair center. There isn't a way around that. Oli doesn't know everything and that's the risk we take when we try new and experimental things that people create but have no way of testing. But, we live and learn. If it wasn't for that issue, you could always cook your own ROM and if the HardSPL was working, you could've easily flashed any ROM. But the keyboard wouldn't been wrong until you could find someone who had the correct keyboard and you extracted the ROM from it and cooked that keyboard driver into your ROM.

Oh noooo!!
Hi ivanmmj,
I used your guide to flashing my HTC P4350 at http://forum.xda-developers.com/showthread.php?t=358615.
It was in French and I wanted it in English. So I downloaded one of the official HTC ROMs "HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe" assuming this was the English one because all the others couldn't have been.
I copied the "RUU_signed.nbh" from the above HTC ROM and put it into the RUU folder as instructed by yourguide (I didn't copy the SPL.nbh file). I then ran the herald-uspl.exe and everything went fine until the RUU utility stopped with the error "invalid vender ID".
The RUU exited without completing, now all I get when the device boots is the screen giving my IPL (1.08.001) and SPL (1.08.001). How do I flash another ROM from this state? I can't do it the "normal" way because ActiveSync can't see the device. When I try to use the RUU tool that comes with your tool, the progress bar shows then it says the tool can't be used with my device.
Someone please help!

foo_bar_baz said:
Hi ivanmmj,
I used your guide to flashing my HTC P4350 at http://forum.xda-developers.com/showthread.php?t=358615.
It was in French and I wanted it in English. So I downloaded one of the official HTC ROMs "HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe" assuming this was the English one because all the others couldn't have been.
I copied the "RUU_signed.nbh" from the above HTC ROM and put it into the RUU folder as instructed by yourguide (I didn't copy the SPL.nbh file). I then ran the herald-uspl.exe and everything went fine until the RUU utility stopped with the error "invalid vender ID".
The RUU exited without completing, now all I get when the device boots is the screen giving my IPL (1.08.001) and SPL (1.08.001). How do I flash another ROM from this state? I can't do it the "normal" way because ActiveSync can't see the device. When I try to use the RUU tool that comes with your tool, the progress bar shows then it says the tool can't be used with my device.
Someone please help!
Click to expand...
Click to collapse
Oh wow. I'm so sorry. I think I may have forgotten to put up a warning for people that have an SPL lower than 4.0. Was your SPL lower than 4.0? If it was, you cannot use the USPL OR the HardSPL and they end up writing part of the ROM over your current SPL and brick the device. This, unfortunately, needs to be fixed by your local repair center. I'll talk to the Mods about unlocking that thread so that I can update it.

ivanmmj said:
Oh wow. I'm so sorry. I think I may have forgotten to put up a warning for people that have an SPL lower than 4.0. Was your SPL lower than 4.0? If it was, you cannot use the USPL OR the HardSPL and they end up writing part of the ROM over your current SPL and brick the device. This, unfortunately, needs to be fixed by your local repair center. I'll talk to the Mods about unlocking that thread so that I can update it.
Click to expand...
Click to collapse
Oh deary me! I am so dead now - I live in Tanzania, East-Africa. My "local" repair center is several hundred thousand miles away across The Big Blue. What exactly do the repair center folks do to fix the device? Perhaps I can soldier out myself with some guidance...
Thank you,
foo_bar_baz.

HARD-SPL - working!

I case of people who don´t read 200 post and still brick their device - here is the guide that worked for ALL people with:
HTC P4350
XDA Terra
WING
with IPL 4.xxx and higher!!! (that is IMPORTANT)
and then follow this:
Default
For me it was working when:
1. install canonyang.cab
2. install aserpolicy.cab
3- install disablesecurity.cab
4. SOFTRESET
5. run RUU from Hard-SPLWM6 folder verison 4.70.yang
6. screen will become white - WAIT until it reboots itselfe.
7. done!
check if SPL now is 4.70.yang
Fore sure: I used this
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
mirror: http://www.sendspace.com/file/ot8zsn
It worked for many others, too.
b.mann said:
I've figured my issue out, maybe I can help the others that get the 202 Connection error.
On your device--BEFORE Hard-SPL--go to Settings->Connections->USB to PC and check that checkbox.
If it's not checked, most times you will get the 202 Connection error. Hard-SPL and you should be good to go!!
Click to expand...
Click to collapse

You may add Dopod C800 to the list

It's the real deal
Succesfully flashed my device under papamopps supervision and can verify that this HardSPL package is working 100%
Thanks again papamopps

heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".

stahlsau said:
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
Click to expand...
Click to collapse
Softreset your Herald and press the Camara butten until you see an Colerd screen it´s the Bootloader. there you will find the IPL and SPL on the screen. softreset your herald without pressing any butten and it will start normely to youre WM. You wont delete any data aslong you nothing Flash.
Ghostrider

stahlsau said:
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
Click to expand...
Click to collapse
link updated!
Thanks!!

yew i am hardspl but it change my boot screen oooo i have to reflash nvm

aron4588 said:
yew i am hardspl but it change my boot screen oooo i have to reflash nvm
Click to expand...
Click to collapse
could you shareyour device information-so that we can see for which device it is working?!

It worked on my:
HTC p4350
It had: WM6 overclocked to 299Mhz (but i let it on Default 201Mhz When I was in de process)
It had de 4mb Page Pool.
Worked great!!! THanks man!

BTW- afteryou have Hard-SPL.
Never use an official RUU with included SPL.nbh (delete this ebfore flashing)
And never use the RUU from Hard-SPL
Allways use the included RUU or take an RUU without SPL.bnh when you onlycan download the ruu_wigned.nbh.
Regards

how to go back to stock?
i currently have hard spl with touchit 4.4
i want to go back to factory spl and factory ruu
can someone please help me?
thank you

i did it with t-mobile wing usa

aron4588 said:
i did it with t-mobile wing usa
Click to expand...
Click to collapse
I also was able to Hard-SPL my T-Mobile wing successfully in the US

and....
in the past ive always went stock b 4 flashing a new rom
what are the steps now to change to new roms? wheather it b hard spl or factory spl
thanks

I am waiting from 20 minutes with my phone in white screen mode... is it normal?
EDIT: ehm... please... im am quite worried. (30 minutes in white screen :S)

johnny88 said:
I am waiting from 20 minutes with my phone in white screen mode... is it normal?
Click to expand...
Click to collapse
it should end after 10 or 15 minutes.
hope you installed all files before and softreset.....

yes all cabs...
during the install of hardspl the ruu install wizard shows a windows with "connection failure" and only an Exit button. I click on it while it is in white mode... I am still waiting...
What should I do? (wainting or reset?)

finally (after 40 minutes of white screen) I softreset with stylus...
It reboots normally as nothing was appened... better then brick.
I will try again later.
THX!

hi
when HTC P4350 is into bootloader mode, SPL and IPL are 1.08.0001
is it an older SPL or waht?
if yes can i update my P4350 to WM6 without using Hard-SPLWM6 ??
any idea?
anyone have a link to learn what's is exactly hard SPL, and the difference between HARD SPL and SOFT SPL
thx in advance
br

BouRRi_GSM said:
hi
when HTC P4350 is into bootloader mode, SPL and IPL are 1.08.0001
is it an older SPL or waht?
if yes can i update my P4350 to WM6 without using Hard-SPLWM6 ??
any idea?
anyone have a link to learn what's is exactly hard SPL, and the difference between HARD SPL and SOFT SPL
thx in advance
br
Click to expand...
Click to collapse
allways start with :
http://forum.xda-developers.com/showthread.php?t=327046
and then try one of this:
http://forum.xda-developers.com/showthread.php?t=358030
first the official one....
and read- read - read