Database Develop

Maybe CID Lock problem ? NEED HELP !!!!

Hi, After the soft reset comand, I removed the battery from my Wizard. After that the followin problem was appear: the phone is bringing up to the splash screen and STOP on this position.I have tried to download another Rom but the problem still is the same. My Phone is not CID unlock and before this, I cooked own rom like is writen here http://forum.xda-developers.com/showthread.php?t=271043 . So any idea how to wake-up my phone MDA Vario.

Ok forgive me if I'm wrong here, I don't really want to judge before I know the full story, but seems to me your brain went on strike momentarily. First rule of flashing any unofficial rom CID UNLOCK YOUR DEVICE. Anyways sorry, I just wanted to say something so it doesn't happen to you again, that said, what rom did you try to upgrade to? what rom did you try to downgrade to after that? is your device a G3 or G4?
If your device is a G3 I would recommend downgrading to this rom by xelecin
ftp://xda:[email protected]_RUU_Wizard_1081002_108_10910_ENG_US.exe
it will ask you if you want to CID unlock your device at the start so you shouldn't need to worry about forgetting this time , if you can't connect your device to activesync just go into the bootloader (hold the camera, voice dial buttons while pressing the reset button) and once it connects run the set-up.
Oh another thing before I forget..... do some searching and read up a bit, because this is a pretty common topic on this forum, best of luck and hope everything works out ok. If not, report back.
*edit* I just noticed the thread that you linked to, I actually wasn't aware that this was possible, but anyways I think it's still much safer to CID unlock your device if possible, and another thing you might try replying in that thread if it doesn't work out since they should be more knowledgeable in the matter..... and that would help keep the forums less cluttered *edit*

Thanks, for your help, Unfortunately you are totaly right for my stupid act (again). At first i tried to solve the problem alone , but whole day I roam through this forum to find solution but I can't find the same problem like my. Maybe because of my ..... brain .Anyway I am with G3. NOW I have
IPL 1.0
SPL 2.26
GSM 01.09.11
OS 1.5.4.2
This is after this procedure http://forum.xda-developers.com/showthread.php?t=263116
I tried also to download also and Molski's 2.26.10.2 AKU2.3 Rom a.k.a. 2.26.10.2 Final Edition Rom, but the problem is the same : The splash screen is running and STOP and.... nothing.
I can go to bootloader and can download new rom, but I can't start fhe phone.

Yeah I know these forums aren't the easiest in which to look for info. So you can go into the bootloader, that's good. Don't try to go to a AKU2.x rom or later, keep it under that, so no 2.26 roms at all. 105, or 108 roms should be good.
Did you try the rom from the link I provided or the one on the thread? and afterwards did it go into the phone at all? My friends MDA had a similar problem last week, caused by the same thing, though in your case I see the SPL isn't updating when you install new roms on his it was the os that wasn't updating, but as soon as I installed that rom I recommended it booted up fine, then I updated his device to molski's 2.3.
I'll check back in a few so let me know how's it going.

Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.

DoCtOr_X said:
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
Click to expand...
Click to collapse
Ok, but tell me how to solve this :
"qiote"
8. Open ActiveSync, Explore and copy enablerapi.cab from your PC's C:\ (remember that's where you extracted lokiwiz to...) to you device, I don't care where.
9. Pick up your PDA, File Explorer, find the enablerapi.cab and click it.
"quote"
I don't have access to the phone explorer and phone at all.
masr1979 I have tried the rom you give me, but it look like there is some things I don't understand: When I start the exe file i have choice <continue> .Whet I type <c> 2(two) time the soft tell me <no device found> and order me to continue with copy ???. After few seconds tell me that Unlocker ..... Done!, and start HTC wizard Unlocker and NOTHING !!! Stop on this position more then 15 min. and only the led for charging on the phone is active.

Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...

Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.

masr1979 said:
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
Click to expand...
Click to collapse
Of course I'm not sure, but I thing it was 2.21. Anyway did you think that is posible to cook my own rom in G4? I'm totally confused.
Every time when I upload new rom I have this:
http://forum.xda-developers.com/attachment.php?attachmentid=32884&stc=1&d=1168184491
IMG_2976.jpg
...and also this is my bootloader screen
http://forum.xda-developers.com/attachment.php?attachmentid=32885&stc=1&d=1168184491
IMG_2977.jpg

Dr Puttingham said:
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Click to expand...
Click to collapse
Thanks, but I try to find oficial rom but without success. And very interesting thing I found.. when I start to upload new rom the soft start to check my old rom and after that tell me that i have GE (german) language, but my old was WWE ?
Is it posible some one to give me some link to official 2.x ROM but for T-mobile german language.

Well the other day I tried finding that german rom for a while.... that search was going nowhere, I saw this thread, I don't know if you might want to check into it and maybe try it out. There's mixed results apparently but who knows
http://forum.xda-developers.com/showthread.php?t=276963

MDA Unlock Blues

Greetings.
I have spent the past couple days searching for a solution to unlock an MDA. I have got all of the different versions of lokiwiz, wizardunlock, lokiwizMsl, etc. and the mda refuses to be unlocked. I believe I am following the directions step for step, but even the forums where people have the same problems as I (internal read/write error, can't find specified path, etc.), none of the solutions are working for this device. From my searching I believe it is a g3 MDA. The stats for the device are as follows:
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 2.26.10.2
I have tried downgrading the firmware to no avail (the ftp site doesnt have the file), and the phone doesn't want to be DOWNgraded anyway. If ANYONE out there is cyberspace can assist, my gratitude will be pouring forth from their screen!
[email protected]

So have you followed this thread? It has valid links to get the Button ROM so you can do the downgrade and points you to the threads that will help you do this unlock:
http://forum.xda-developers.com/showthread.php?t=298613
In a nutshell, downgrade to the button rom (just execute the file and follow the directions). Your IPL will be 1.xx at this point and then you can use lokiwiz .2b to do the CID unlock. all of this is outlined in the excellent guide by Dr. P (which the above link will take you to). Then get your SPL down to 1.xx, then upgrade back up to 2.xx. Then you can start flashing custom roms.
If you still have issues, let us know exactly what you are doing and exactly what errors you see (or what your phone does or doesn't do).

Greetings mfrazzz.
I have indeed downloaded and attempted the button ROM. The installer started and then after about two minutes told me that the phone wouldn't let me Downgrade the ROM. I am currently downloading (70% done) the button ROM again and will see if it has the same problem. If so, I will of course seek the help of the experts here. Thanks for the quick reply!

gtw said:
I have indeed downloaded and attempted the button ROM. The installer started and then after about two minutes told me that the phone wouldn't let me Downgrade the ROM.
Click to expand...
Click to collapse
Let us know the exact error you get (I assume the error is on the PC side) and then what the behavior of the phone is after you do this. Also, at what point does this error happen (has it actually started loading the rom or is it before it gets to that point and where its just checking your phone?)
Another option would be to try putting on the Wizard Love rom and then downgrading to button. Shot in the dark but worth a try.
Also remove your SD card when you try to downgrade. Try from a different PC if you can, or reboot your current pc before attempting this again.
Good luck!

Greetings again.
After downloading and executing the button ROM updater, it went to the status bar screen and stayed there for about a minute before displaying the following error message:
Error [296] : UPGRADE ONLY
This is (I believe) the same error I got previously. I was using RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship (which is the file that I downloaded from http://forum.xda-developers.com/showthread.php?t=298613 under the link button ROM (step g3.3).
ALSO... the phone is stuck in the multicolored ROM screen. (the red green and blue) On the screen (from top to bottom
IPL 2.26 RUU
SPL 2.26
USB

gtw said:
This is (I believe) the same error I got previously. I was using RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship (which is the file that I downloaded from http://forum.xda-developers.com/showthread.php?t=298613 under the link button ROM (step g3.3).
Click to expand...
Click to collapse
Nope, thats the Cingular 2.25 ROM. Thats why you are getting the error (since you aren't CID Unlocked it won't let you load that).
The ROM you are supposed to be loading is this one:
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
Thats the Button ROM (and the one I show being in that link on that page). Please download that, and run it. You should make more progress
Since you are on the bootloader screen (Rainbow screen you described) just run the button rom when you get it downloaded (active sync will not connect, but since you see USB above the left soft key you have the connection to do this).

I see....it would make a difference if I got the right program! Rapidshare says I have ten minutes before I can download another file, so after I download http://rapidshare.com/files/18212239...WWE.exe.h tml, I will try it and post the results here! Thank you so much for your help, mfrazzz!

Greetings.
After downloading and installing (onto the phone) http://rapidshare.com/files/18212239...WWE.exe.h tml, the stats for the phone are
ROM: 2.26.10.2 WWE
Radio Version: 02.25.11
Protocol: 4.1.13.12
ExtRom: 2.26.10.105
After executing lokiwiz, lokiwizMSL, wizardunlock, and a few different versions of each (after I put the enableRapi onto the phone), the phone still won't unlock. It either gives me a "Cannot find the specified path" error, or the "Internal read/write error".
Im not sure that the file I downloaded was a 'down'grade, so if anyone sees a solution, please post!
Thank you

Did the flash of the Button ROM work? Your IPL should have changed to 1.xx after doing that flash (and your splash screen would be a photo with a mug of beer in the foreground). Since your IPL and SPL still show 2.26, it appears the flashing of the button rom didn't happen.
Not sure what else to tell you. It should be as simple as running the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe file, and letting it flash to your phone to do the initial downgrade. But you have to be a 1.xx for IPL before the lokiwiz .2b will be able to work (so there is no point in doing anything else until the steps before that complete. Again, follow to the letter (including checking the results) the thread by Dr. P on CID Unlocking. You should never try to do steps before the previous step is complete).

mfrazzz said:
It should be as simple as running the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe file, and letting it flash to your phone to do the initial downgrade.
Click to expand...
Click to collapse
I thought it would be that easy too. I clicked on the file, it went through the flash, and those are the stats that showed up. I am currently trying the flash again. One difference I noticed this time is that the version it says is going to be installed is 1.xx this time, last time it said 2.XX. It looks like its going ok, though. Ill post again once it is done.

Greetings.
THANKS FOR YOUR HELP MFRAZZZ! Not only did your prompt responses brighten my otherwise gloomy, MDA filled day! Your patience with my noobitude on this device (its not mine) has been a blessing beyond anything I could have hoped for. The device is now UNLOCKED!!! After the last flash, the beer mug showed up and all was well. Lokiwiz worked like a charm and your help, as I said, was much needed! THANK YOU!

gtw said:
Greetings.
THANKS FOR YOUR HELP MFRAZZZ! Not only did your prompt responses brighten my otherwise gloomy, MDA filled day! Your patience with my noobitude on this device (its not mine) has been a blessing beyond anything I could have hoped for. The device is now UNLOCKED!!! After the last flash, the beer mug showed up and all was well. Lokiwiz worked like a charm and your help, as I said, was much needed! THANK YOU!
Click to expand...
Click to collapse
Very cool. Just make sure you get the SPL down to 1.xx before you move back up to a 2.xx Official rom and you will be golden.
Congrats, and glad I could help

mfrazzz you are amazing

upgrade didn't work

i tried several times like described here http://forum.xda-developers.com/showthread.php?t=285435
but always when i want to downgrade my rom with the mentioned button 1.05 rom it went till 98% an then my wizard didnt do anything until i reboot it.
with the standard o2 rom i have the lokiwiz didnt work. but what could be the fault ? what can i try to get it work ?

peran281 said:
i tried several times like described here http://forum.xda-developers.com/showthread.php?t=285435
but always when i want to downgrade my rom with the mentioned button 1.05 rom it went till 98% an then my wizard didnt do anything until i reboot it.
with the standard o2 rom i have the lokiwiz didnt work. but what could be the fault ? what can i try to get it work ?
Click to expand...
Click to collapse
Who knows, you didn't tell anything useful about your phone or what ROMs or anything else. Try the link in my sig. Read it, do ALL the steps, if you think you can skip something--don't, if "it doesn't work"--then you didn't follow all the steps.
Best of luck,
--M

peran281 said:
it went till 98% an then my wizard didnt do anything until i reboot it.
Click to expand...
Click to collapse
I think this may be part of the problem... How long did you wait? All roms stall at some point and can stall for like 5 mins (sometimes more). Don't do ANYTHING, unless your PC gets an error. Its still working. If it sits for more than 10 mins then you probably do have a problem, but it can sit for what seems like forever sometimes. Just be patient.

If it sits for more than 10 mins then you probably do have a problem
Click to expand...
Click to collapse
i tried it several times and i always had to wait about 20 - 30 minutes and always the same result being hung up at 98%.
about your phone or what ROMs
Click to expand...
Click to collapse
here i have some data. i have
ipl/spl: 2.21(o2 ger rom)
gsm : 02.19.11 (o2 ger rom)
os:2.21.4.3 (o2 ger rom)
i hope that is all the important info u need.
i'll try the link from demontefixo and let u know if it work.

Tried flashing on anther pc yet? For most people with this kind of problem that's the solution.

Tried flashing on anther pc yet?
Click to expand...
Click to collapse
i have 2 pcs and 1 laptop and i used all of them one time.

i used now this installationhttp://forum.xda-developers.com/showthread.php?t=298613
and it stucked on step G3.4 when i want to flash the wizard_love rom with this error:
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
what did i do wrong? i followed step by step like demontefixo said for 3 times.

peran281 said:
i used now this installationhttp://forum.xda-developers.com/showthread.php?t=298613
and it stucked on step G3.4 when i want to flash the wizard_love rom with this error:
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
what did i do wrong? i followed step by step like demontefixo said for 3 times.
Click to expand...
Click to collapse
This is an error that you can get on G4 devices. What are you doing in step G3.4? Read G4.6!

but in the tutorial http://forum.xda-developers.com/showthread.php?t=298613
is described how to determine the wizard type and my ipl/spl is 2.21 and thats G3 device.

peran281 said:
i used now this installationhttp://forum.xda-developers.com/showthread.php?t=298613
and it stucked on step G3.4 when i want to flash the wizard_love rom with this error:
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
what did i do wrong? i followed step by step like demontefixo said for 3 times.
Click to expand...
Click to collapse
That error indicates you aren't CID Unlocked. Is your phone booting now? or are you at the bootloader (rainbow) screen? If you are at the bootloader, then flash your official rom to get a working device. Once you have a working device, then go to step G3.6 and do the CID Unlock procedure.
ALso remove your SD card while you are doing all of this until you get it CID Unlocked and onto the TMobile 2.26 official rom (G3.8).
AND yes, you have a G3, so you don't (and shouldn't) be in the G4.x steps.

i want to downgrade my rom with the mentioned button 1.05 rom it went till 98% an then my wizard didnt do anything
Click to expand...
Click to collapse
yes but thats my problem. i tried it like described here http://forum.xda-developers.com/showthread.php?t=285435
and always the same problem. is there another way to cid unlock the device ?

peran281 said:
yes but thats my problem. i tried it like described here http://forum.xda-developers.com/showthread.php?t=285435
and always the same problem. is there another way to cid unlock the device ?
Click to expand...
Click to collapse
This is my last post for the day as I can't handle anymore of this (its not just you peran, but the other half dozen posts I've read in the last hour or so where people just aren't following the instructions they are given. These methods are tried and true, and they work. And yes, this is the way to CID Unlock your phone unless you pay to have it done)... In a previous post to you, it was stated you had to get back to an official rom first. Have you done this (your replies indicate you just continue to do other roms)? You need to get the latest rom from your carrier and get your device working again. Get it all charged up, pull out your SD card, then try flashing back to the button rom (I would also suggest you try pulling the button rom down again in case there is something wrong with your previous download of it).
Its the weekend, I'm going to go enjoy the spring weather

i did it like u suggested mfrazzz. i know that my phone isnt CID unlocked. but that is my problem. i read the mentioned article x-times and did it like described but the problem is : when i downgrade to button 1.05 rom then my pda stuck at 98% and i get the message from the update program on my pc that the downgrade was successful. but it isn't. why? till this step u cant do much wrong i think... :-(

Have you flashed back to the official rom from your carrier? Until you do that and get your device back working there is no point in trying to continue to flash the button rom (or any other rom). You have to get back to your carrier's official rom first. None of your posts indicate you have done that.

with the standard o2 rom
Click to expand...
Click to collapse
i always went back to the official rom from my provider and this always works perfectly. i tried it today again but always the same stucking at 98%.
i did it STEP BY STEP but it didnt work.
is there another rom i can use than button 1.05 ?

Is there no other rom then the one from button to downgrade my ipl/spl to 1.xx ?
please help.

I'm not aware of another one.
You might want to try this thread (I know its not the same issue, but might be worth trying to see if it makes a difference)
http://forum.xda-developers.com/showthread.php?t=294107

You might want to try this thread (I know its not the same issue, but might be worth trying to see if it makes a difference)
http://forum.xda-developers.com/showthread.php?t=294107
Click to expand...
Click to collapse
I tried it but it didnt help.
now i used Xelecin's 1.08 rom and this one worked. then i used lokiwiz and it was successful. but then i flashed the tmobile 2.26 rom and this worked but i couldnt use my sim-card any more. always when i insert my pin it said unknown sim and then crashes. i thought i sim-unlocked the wizard? another problem was when i want to flash the official o2 rom it said unknown vendor id...but i used before lokiwiz and there were no errors...and the last question, i know there are many now, where do i insert the sim-code i got from lokiwiz?
i hope someone have some answers...thx before

Please HELP ME!! upgrade from bootloader

Hello, I've tried to upgrade my Qtek 9100 G3, the flashing finishing with success, but when I start the phone it doesn't load windows, I can see the splash screen, and then the screen become completely white.
I follow the faria instruction, and tried to install the wizard love ROM from bootloader screen, but I have error 300, "Strumento di aggiornamento non valido" that in english mean Update device not good..
Please, help me!!

finger roll said:
Hello, I've tried to upgrade my Qtek 9100 G3, the flashing finishing with success, but when I start the phone it doesn't load windows, I can see the splash screen, and then the screen become completely white.
I follow the faria instruction, and tried to install the wizard love ROM from bootloader screen, but I have error 300, "Strumento di aggiornamento non valido" that in english mean Update device not good..
Please, help me!!
Click to expand...
Click to collapse
1.- I don´t think you have a G3 because de IPL/SPL you posted, but is very strange that Wizard Love RUU reported such error in a G4
2.- What kind of upgrade you wanted to do?
3.- Reflash your original ROM if you have it available.

Mod edit: Please refer him to the wiki before posting such information.

Yes, I have a G4 phone, you can see on my sign, but my friend with the phone broken have a G3, and now he can install any kind of rom, the important it's that it works.

So.... problem solved?
finger roll said:
Yes, I have a G4 phone, you can see on my sign, but my friend with the phone broken have a G3, and now he can install any kind of rom, the important it's that it works.
Click to expand...
Click to collapse
Good for him! And how did he recover his phone? What did your friend do?

No he don't solved the problem, with any kind of ROM he's tring to install he get the same problem "error 300": invalid upgrade Tool!!
Please, do you have any idea?

Madcap180 said:
he has a G3 .. 2.17 I beleive is G3... Anything above 2.21 is G4 I beleive.
Click to expand...
Click to collapse
This is WRONG... PLEASE Don't post information like this unless you are positive of what you are saying as this could cause people to brick their phones.
Its explained in numerous places how to determine this, but this post is one of the best for overall information on determining your phone type and how to flash and recover from flash issues:
http://forum.xda-developers.com/showthread.php?t=298613

Madcap180 said:
he has a G3 .. 2.17 I beleive is G3... Anything above 2.21 is G4 I beleive.
Click to expand...
Click to collapse
Mine is a G4 (2.25.001) The trailing 0001 is what so far has identified a G4

when I was first trying to flash my phone I read anything 2.21 and above was a G4... so perhaps I READ the wrong information.

I got lost buddy
finger roll said:
No he don't solved the problem, with any kind of ROM he's tring to install he get the same problem "error 300": invalid upgrade Tool!!
Please, do you have any idea?
Click to expand...
Click to collapse
Could you provide the specifics of your friend´s phone?
* IPL / SPL (Current and original)
* Original ROM
* What ROM he was flashing when he got for the first time the white screen?

mfrazzz said:
This is WRONG... PLEASE Don't post information like this unless you are positive of what you are saying as this could cause people to brick their phones.
Its explained in numerous places how to determine this, but this post is one of the best for overall information on determining your phone type and how to flash and recover from flash issues:
http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse
The brick phone is a G3 with 2.26 IPL and SPL, from the T-mobile ROM. He brick the phone installing the prekitchen ROM from Faria.
Now Following the faria instruction, he would like to flash with wizard love rom, but he get the wrong update tool error. Did you know if there are some other possible solution?
In booloader mode, when I connect to the usb, in the phone screen appear USB, so I think that the phone it's not completely gone.

finger roll said:
The brick phone is a G3 with 2.26 IPL and SPL, from the T-mobile ROM. He brick the phone installing the prekitchen ROM from Faria.
Now Following the faria instruction, he would like to flash with wizard love rom, but he get the wrong update tool error. Did you know if there are some other possible solution?
In booloader mode, when I connect to the usb, in the phone screen appear USB, so I think that the phone it's not completely gone.
Click to expand...
Click to collapse
You´re right, if you have the tricolor screen and USB connection you´re safe, no worries!!! We can save it!
Have you tried the original T-Mobile? This one should do it, if you don´t succeed with the original ROM you may try Wizard Love but you have to use the right RUU, in this case pull de nk.nbf file from the Wizard Love and put it into the folder were the original T-Mobile RUU is (this would replace the original T-Mobile nk.nbf with the one from Wizard Love), then execute the original T-Mobile RUU with the new nk.nbf of course your Wizard connected to the PC, remove miniSD card (if any) and make sure you dissable the activesync connection
If my explanation sounds confussing for you, check this:
http://forum.xda-developers.com/showthread.php?t=294107
Good luck!

Thanks, I downloaded the T-mobile ROM, insert the love ROM nk.nbf and tried to upgrade...I get this error message:
Error 238: File Read
So, I extract the T-mobile, and launch the RUU directly, using the t-mobile nk.nbf, and not the wizard love one.
Now I'm flashing!!!!

Good for you!
finger roll said:
Thanks, I downloaded the T-mobile ROM, insert the love ROM nk.nbf and tried to upgrade...I get this error message:
Error 238: File Read
So, I extract the T-mobile, and launch the RUU directly, using the t-mobile nk.nbf, and not the wizard love one.
Now I'm flashing!!!!
Click to expand...
Click to collapse
Excelent!! I´m glad you had fix the problem!

[Walkthrough] How to fix your bricked phone

So, you've decided that your shiny new toy isn't very well setup by default. You flashed a ROM and lo and behold, you missed some instruction somewhere and now you think it's bricked.
Here's the good news:
It's not bricked!!
Bricked means that it's dead and it's in no way or shape recoverable.
There is still a chance. (As long as you didn't try to hardSPL with another Device's SPL...)
All you have to do is:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
I'll put in links for those who can't find them...
Here's tmobile's ROM.

WOW! That´s all??
Ok - then provide us a link to a XDA Terra RUU!!!!!!
hahahaha. Thanks for this help. Maby for some people it is usefull - but written 1000 times before.
ivanmmj said:
So, you've decided that your shiny new toy isn't very well setup by default. You flashed a ROM and lo and behold, you missed some instruction somewhere and now you think it's bricked.
Here's the good news:
It's not bricked!!
Bricked means that it's dead and it's in no way or shape recoverable.
There is still a chance. (As long as you didn't try to hardSPL with another Device's SPL...)
All you have to do is:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
I'll put in links for those who can't find them...
Click to expand...
Click to collapse

papamopps said:
WOW! That´s all??
Ok - then provide us a link to a XDA Terra RUU!!!!!!
hahahaha. Thanks for this help. Maby for some people it is usefull - but written 1000 times before.
Click to expand...
Click to collapse
I know it has been stated a million times. I'm just tired of the same question being asked over and over again and so here we are...

Too bad it'll be stated a million more times afterwards too.

falconeyez said:
Too bad it'll be stated a million more times afterwards too.
Click to expand...
Click to collapse
If we sticky it and threatened their lives if they don't read it... lol

ivanmmj said:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
Click to expand...
Click to collapse
It will not help!

ASerg said:
It will not help!
Click to expand...
Click to collapse
And we hold their pet's hostage?

ivanmmj said:
And we hold their pet's hostage?
Click to expand...
Click to collapse
Or better yet, tell them to send us their phones, then we "unbrick" them and sell them on eBay.

falconeyez said:
Or better yet, tell them to send us their phones, then we "unbrick" them and sell them on eBay.
Click to expand...
Click to collapse
Might work out, I get 10% of the over all sold
Ghostrider

Ghostrider said:
Might work out, I get 10% of the over all sold
Ghostrider
Click to expand...
Click to collapse
Fine, but I get 15% because it's my thread.

The instructions to do this are actually in my newbie thread. Which is a sticky.

TylerC161 said:
The instructions to do this are actually in my newbie thread. Which is a sticky.
Click to expand...
Click to collapse
I know, but most people don't search. I figured, maybe if it says "How to fix your bricked phone" on the title, they might get the idea.
It was actually done mostly as a joke...

help
I used the hardSPL from this thread..
http://forum.xda-developers.com/showthread.php?t=358225
It worked successfully and I was able to restart into WM6. Then I tried loading the TouchIT 4.4 and it installed cleanly with no errors. But when I went to restart it, my Wing just sits there at the CanonYang boot screen and never changes.
I tried using the steps here to restore the tmo default rom, but it after 1% on the progress bar, the screen goes blank and the CanonYang screen comes back. Is there anything I can do?
edit: I can get to the bootloader screen with the color bars. I'm not sure if this additional info will be of any help.
IPL 4.10.0002
SPL 4.70.Yang

gumbico said:
I used the hardSPL from this thread..
http://forum.xda-developers.com/showthread.php?t=358225
It worked successfully and I was able to restart into WM6. Then I tried loading the TouchIT 4.4 and it installed cleanly with no errors. But when I went to restart it, my Wing just sits there at the CanonYang boot screen and never changes.
I tried using the steps here to restore the tmo default rom, but it after 1% on the progress bar, the screen goes blank and the CanonYang screen comes back. Is there anything I can do?
edit: I can get to the bootloader screen with the color bars. I'm not sure if this additional info will be of any help.
IPL 4.10.0002
SPL 4.70.Yang
Click to expand...
Click to collapse
SPL 4.70.yang!!! your device is HARD-SPL!!
So going back to stockrom--> delete the SPL.nbh from EVERY RUU you are running.
Then it shouldn´t stop......

Big Thanks papa! That did the trick. My Wing is happy once again and running Open Touch. But I still want to give TouchIt another try.

And what if i cant find stock RUU mine came with some arabic keyboard and spl was 1.08 , thanks to Oli he didnt mention that SPL should be 4 or higher , so device is bricked since first Olis release and no way to find this arabic stock RUU.
Any Help ?????
Hitec

If the device had an spl of 1.08 prior to HardSPLing it, then you'll have to bring the device to your nearest repair center. There isn't a way around that. Oli doesn't know everything and that's the risk we take when we try new and experimental things that people create but have no way of testing. But, we live and learn. If it wasn't for that issue, you could always cook your own ROM and if the HardSPL was working, you could've easily flashed any ROM. But the keyboard wouldn't been wrong until you could find someone who had the correct keyboard and you extracted the ROM from it and cooked that keyboard driver into your ROM.

Oh noooo!!
Hi ivanmmj,
I used your guide to flashing my HTC P4350 at http://forum.xda-developers.com/showthread.php?t=358615.
It was in French and I wanted it in English. So I downloaded one of the official HTC ROMs "HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe" assuming this was the English one because all the others couldn't have been.
I copied the "RUU_signed.nbh" from the above HTC ROM and put it into the RUU folder as instructed by yourguide (I didn't copy the SPL.nbh file). I then ran the herald-uspl.exe and everything went fine until the RUU utility stopped with the error "invalid vender ID".
The RUU exited without completing, now all I get when the device boots is the screen giving my IPL (1.08.001) and SPL (1.08.001). How do I flash another ROM from this state? I can't do it the "normal" way because ActiveSync can't see the device. When I try to use the RUU tool that comes with your tool, the progress bar shows then it says the tool can't be used with my device.
Someone please help!

foo_bar_baz said:
Hi ivanmmj,
I used your guide to flashing my HTC P4350 at http://forum.xda-developers.com/showthread.php?t=358615.
It was in French and I wanted it in English. So I downloaded one of the official HTC ROMs "HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe" assuming this was the English one because all the others couldn't have been.
I copied the "RUU_signed.nbh" from the above HTC ROM and put it into the RUU folder as instructed by yourguide (I didn't copy the SPL.nbh file). I then ran the herald-uspl.exe and everything went fine until the RUU utility stopped with the error "invalid vender ID".
The RUU exited without completing, now all I get when the device boots is the screen giving my IPL (1.08.001) and SPL (1.08.001). How do I flash another ROM from this state? I can't do it the "normal" way because ActiveSync can't see the device. When I try to use the RUU tool that comes with your tool, the progress bar shows then it says the tool can't be used with my device.
Someone please help!
Click to expand...
Click to collapse
Oh wow. I'm so sorry. I think I may have forgotten to put up a warning for people that have an SPL lower than 4.0. Was your SPL lower than 4.0? If it was, you cannot use the USPL OR the HardSPL and they end up writing part of the ROM over your current SPL and brick the device. This, unfortunately, needs to be fixed by your local repair center. I'll talk to the Mods about unlocking that thread so that I can update it.

ivanmmj said:
Oh wow. I'm so sorry. I think I may have forgotten to put up a warning for people that have an SPL lower than 4.0. Was your SPL lower than 4.0? If it was, you cannot use the USPL OR the HardSPL and they end up writing part of the ROM over your current SPL and brick the device. This, unfortunately, needs to be fixed by your local repair center. I'll talk to the Mods about unlocking that thread so that I can update it.
Click to expand...
Click to collapse
Oh deary me! I am so dead now - I live in Tanzania, East-Africa. My "local" repair center is several hundred thousand miles away across The Big Blue. What exactly do the repair center folks do to fix the device? Perhaps I can soldier out myself with some guidance...
Thank you,
foo_bar_baz.