How can i Downgrade my firmware.
error massage 296 only Upgrade
FW:2.26
This error message will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
Please post more info on what ROM you're using at the moment and what ROM you're trying to downgrade to...
Related
I have a M3000 Orange after unlocking it with Lokiwiz03 im trying to flash it but the problem is that I don’t get all the info in the rom update utility I only get this
Image Version : 1.3.1.104
I don’t get the Model ID or the Language.
After continuing with the update with the original Orange utility it goes to Boot mode and then gives me Error 294 :Invalid ID VENDER
And when flashing it with the no-id utility it gives me the same Image Version with out Model ID or Language after pressing the update button it directly gives me ERROR 238 :FILE ERROR
Any one can help me out
Thanks guys
You have SIM unlocked your phone. This allows you to use any SIM card in it.
If you want to flash a non-Orange ROM you must CID unlock your phone. Lokiwiz03 cannot do this.
Lokiwiz02 can CID unlock if the ROM revision is low enough.
i Unlocked it with awizard Lokiwiz02 didnt do it then i flashed with the new RUU working 100 %
But for some resone i still don’t get the Model ID or the Language do you know why ?
thanks for all your help
DrCard said:
i Unlocked it with awizard Lokiwiz02 didnt do it then i flashed with the new RUU working 100 %
But for some resone i still don’t get the Model ID or the Language do you know why ?
thanks for all your help
Click to expand...
Click to collapse
SInce you never bothered to mention which rom you are using I assume you're flashing one of the many custom roms here. The RUU program has been modified so that it will always allow you to attempt to flash. For this to work it has to believe that you have an older rom installed on your phone.
Hi, I've a Qtek9100 with ipl & spl 2.17.0001 WWE, so I guess it's a g4, and I'd like to upgrade to the latest spanish rom. I've read a lot of threads, including the one supposed to fix my problem when tryng to unlock the CID (http://forum.xda-developers.com/showthread.php?t=263116), but keep getting errors when I try to downgrade using custom__ruu_wizard_1050412_wwe_101_11210_wwe. rom
The pda goes into bootloader mode and the the upgrade utility gives an "error 300: invalid update tool, this update utility cannot be used for your pda phone. Please get newer update utility" error message.
Can anyone help, please?
Thanks in advance
Hi, problem solved, found a thread by Isidoro about it and it worked: http://forum.xda-developers.com/showthread.php?t=271043&highlight=isidoro
Hi!
Got som issues!!
Updated my Qtek 9100 with IPL/SPL 3.08 - Worked fine!
Updated my OS with Core 2.0 - Seemed to work fine
As far as I know my device is CID-unlocked!
Restarted my phone!
Now my phone can't load the OS, was stucked in second splashscreen that shows the specs
IPL 3.08
SPL 3.08
GSM 02.69.11
OS 10.2.0.8
Entered the bootloader!
Disabled antivirus
Then Following steps has been taken:
Flash with the original rom "RUU Prodigy 21771 2177103 026111 QTEK SVE SVE Ship"-package (eg tool 2.5.2.0 Swe)
Result: "ERROR[296]: Upgrade Only
Flash the original ROM and with the ROMUpdateUtility (2.0.1.0) English
Result: ERROR[300]: Invalid Update Tool
Flash the original ROM and with the ROMUpdateUtility (2.5.2.0) English
Result: ERROR[296]: Upgrade Only
Flash the Core 2.0 ROM with the ROMUpdateUtility (2.0.1.0) English
Result: ERROR[300]: Invalid Update Tool
Flash the Core 2.0 ROM with the ROMUpdateUtility (2.5.2.0) Swedish
Result: ERROR[238]: Cannot read file
Flash the Core 2.0n ROM with the ROMUpdateUtility (2.5.2.0) English
Result: ERROR[238]: File Read
Flash the WM6 Busines Edition ROM with the ROMUpdateUtility (2.0.1.0) En
Result: Flashing 100% Success
Still hangs in second screen after boot!
Flash the original ROM with the ROMUpdateUtility packaged with the WM6BE (eg 2.0.1.0 en)
Result: Flashing 100% Success
Still hangs in second screen after boot!
Still with the same specs as described in the beginning!
The flashing went OK but nothing has changed, why????
Even tried a Hard Reset and reflashing again with the opriginal rom, no changes!
------------------------------------------------------------------------
Why? Dunno!
Can anyone give me a hint what to do??!!
Is there a IPL/SPL 2.xx to reflash my phone with?
Is this needed to be done before proceeding?
What else can I do, except get it to my dealer for repair?
/Mike
mostberg said:
As far as I know my device is CID-unlocked!
Click to expand...
Click to collapse
that doesn't sound like a very certain assertion?
-------------------------------------------------------------------------
ERROR [238] : FILE READ
This error message may appear when, for some unknown reason, the ROM image on the phone is corrupt. Download the whole RUU and try again.
-------------------------------------------------------------------------
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
-------------------------------------------------------------------------
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
all of which strongly imply that your are not cid unlocked
Hi all,
I own an I-mate Kjam with an official ROM 2.18.9.1 ITA. I would like to flash my kjam with a not official ROM, because they stopped to upgrade this device.
In order to flash the new ROM I should need to CID unlock my device and to do this I should downgrade to the ROM 1.xx.x.x.
I tried to do that but an error occurred and stopped the process. This error come out because it isn't possible to downgrade from this Rom version (this is the meaning of the error message). The same is written in the I-mate official site, "it is not possible to come back from this ROM version".
Is it possible to find out an alternative way the flash my device?
Thanks in advance.
Double Post
rainer_70 said:
Hi all,
I own an I-mate Kjam with an official ROM 2.18.9.1 ITA. I would like to flash my kjam with a not official ROM, because they stopped to upgrade this device.
In order to flash the new ROM I should need to CID unlock my device and to do this I should downgrade to the ROM 1.xx.x.x.
I tried to do that but an error occurred and stopped the process. This error come out because it isn't possible to downgrade from this Rom version (this is the meaning of the error message). The same is written in the I-mate official site, "it is not possible to come back from this ROM version".
Is it possible to find out an alternative way the flash my device?
Thanks in advance.
Click to expand...
Click to collapse
Don't double post the same problem,wait for an answer and advise in your initial post.
Sorry for the mistake!
I am about to flsh a rom to my g4 wizard 200 but the RUU keeps showing the error 300 anyone can help??
and another thing ...can anybody find me a frensh rom please i need it very much
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
Before you flash your rom, make sure you have the right rom or you will brick your wizard, also make sure you have CID unlocked device, read these posts before flashing (important)
http://forum.xda-developers.com/showthread.php?t=310831
http://forum.xda-developers.com/showthread.php?t=285435