I have Faria's AKU 3.2 RC1 ROM installed but I can no longer use the Wizard as a Bluetooth modem. I have sucessfully paired it with my XP laptop but I can't see any services the Wizard is offering. Previously with the official QTEK AKU 2 ROM and the RISidoro 2.26 ROM I could select the Serial communications service from the Wizard and I would get a Bluetooth modem installed on the PC.
I had a search on here and on Google and found these:
http://forum.xda-developers.com/showthread.php?t=272727&highlight=AKU+3.2+Bluetooth+modem
http://forum.xda-developers.com/showthread.php?t=276410
Neither of which has helped me.... This is for a plain old dial-up connection to a console port on a Cisco router, so no Internet connection, no PPP etc. Can this work with the AKU 3.2 ROM?
Anyd
send me this rom and i'll figure this problem out for u.
ADB100 said:
I have Faria's AKU 3.2 RC1 ROM installed but I can no longer use the Wizard as a Bluetooth modem. I have sucessfully paired it with my XP laptop but I can't see any services the Wizard is offering. Previously with the official QTEK AKU 2 ROM and the RISidoro 2.26 ROM I could select the Serial communications service from the Wizard and I would get a Bluetooth modem installed on the PC.
I had a search on here and on Google and found these:
http://forum.xda-developers.com/showthread.php?t=272727&highlight=AKU+3.2+Bluetooth+modem
http://forum.xda-developers.com/showthread.php?t=276410
Neither of which has helped me.... This is for a plain old dial-up connection to a console port on a Cisco router, so no Internet connection, no PPP etc. Can this work with the AKU 3.2 ROM?
Anyd
Click to expand...
Click to collapse
Please please if you have ANY questions and you don't find any solution, also make a search strictly under my nick, only looking for tutorial / article threads started by me. I've discussed this problem and the solutions to it http://forum.xda-developers.com/showthread.php?t=282780
Is AKU 3.2 worth the upgrade?
Menneisyys said:
Please please if you have ANY questions and you don't find any solution, also make a search strictly under my nick, only looking for tutorial / article threads started by me. I've discussed this problem and the solutions to it http://forum.xda-developers.com/showthread.php?t=282780
Click to expand...
Click to collapse
Thanks for that insight, I must admit I did find that after a bit more searching after I posted the thread.
It looks like what I want isn't possible via Bluetooth with AKU3 since there is no longer the ability to have a Bluetooth Modem. I am sure I would be able to get the internet sharing working but that isn't what I want to achieve - I want to open an asynchronous terminal session to a Cisco console port over a modem link.....
Ah well, it was a nice thought...
How do we influence Microsofts Developers to get this re-added since as a networking engineer this was a really useful tool to have?
Andy
AKU3.*
ADB100 said:
I have Faria's AKU 3.2 RC1 ROM installed but I can no longer use the Wizard as a Bluetooth modem. I have sucessfully paired it with my XP laptop but I can't see any services the Wizard is offering. Previously with the official QTEK AKU 2 ROM and the RISidoro 2.26 ROM I could select the Serial communications service from the Wizard and I would get a Bluetooth modem installed on the PC.
I had a search on here and on Google and found these:
http://forum.xda-developers.com/showthread.php?t=272727&highlight=AKU+3.2+Bluetooth+modem
http://forum.xda-developers.com/showthread.php?t=276410
Neither of which has helped me.... This is for a plain old dial-up connection to a console port on a Cisco router, so no Internet connection, no PPP etc. Can this work with the AKU 3.2 ROM?
Anyd
Click to expand...
Click to collapse
One of the improvement of AKU3.x is that dial-up modem link is no longer supported. Instead, you should use BT PAN (BT networking) from your XP to connect to your phone and setup internet sharing on your phone to enable internet access for your PC.
foxbat121 said:
One of the improvement of AKU3.x is that dial-up modem link is no longer supported. Instead, you should use BT PAN (BT networking) from your XP to connect to your phone and setup internet sharing on your phone to enable internet access for your PC.
Click to expand...
Click to collapse
Hi, thanks for the reply but if you read the thread this isn't what I want to achieve:
I want to open an asynchronous terminal session to a Cisco console port over a modem link.....
Click to expand...
Click to collapse
Andy
ADB100 said:
How do we influence Microsofts Developers to get this re-added since as a networking engineer this was a really useful tool to have?
Click to expand...
Click to collapse
MS is aware of the problem (there have been complaints everywhere; see for example http://www.pocketpcthoughts.com/forums/viewtopic.php?p=423325 ) and, hopefully, they will fix it.
foxbat121 said:
One of the improvement of AKU3.x is that dial-up modem link is no longer supported.
Click to expand...
Click to collapse
dunno if it's an improvement
tsutton said:
Is AKU 3.2 worth the upgrade?
Click to expand...
Click to collapse
Depends. It has some good sides (some kind of BT PAN; decreased boot-in time etc) but the lack of BT DUN may be a real pain in the butt.
Related
I updated to Faria's AKU 3.2 and loved it........I do mean loved it! Then I started missing the calls and voicemails. I pressed on and reflashed everything............started missing calls again. I had so fell in love with the rom and the internet share. I finally with much regret had to go back to the 2.3. I miss the "Internet Share" feature that was on the 3.2. I am have to use my phone on my laptop quiet a good bit and you can understand how depressing this has been. I sure wish we had a working 3.2 or 2.3 with internet sharing. I know Faria's coming out with something.....praying and hoping in Cingular land.
yea that was a super cool feature.
Tomcat,
The 2.3/2.6 Roms have the same program. It is called something different in those ROMS, but still allows you to connect your phone to your PDA. The only difference between the two is that the 2.3/2.6 ROMS allow USB or IR connections while the 3.x+ roms add Bluetooth as an option.
jpryor said:
Tomcat,
The 2.3/2.6 Roms have the same program. It is called something different in those ROMS, but still allows you to connect your phone to your PDA. The only difference between the two is that the 2.3/2.6 ROMS allow USB or IR connections while the 3.x+ roms add Bluetooth as an option.
Click to expand...
Click to collapse
now that i know what causes the phone to fail [a specific file] i have made some changes to aku3 roms,but i got no time to release yet.
The program is called "Modem Link" I just build a new media center pc and I didn't have any way of connecting it to the net so I was using that and it worked like a charm. I connected it through the USB, used this driver http://www.pdagold.com/files/articles/en/0000000269_HCxN12752.zip
Oh and Faria glad to hear your on top of the missed call issue, that and those cool looking crossbow icons are 2 things I'm really looking forward to, Godspeed
It's just not the same
Yes, I used the modem link before going to faria 3.2 and I have gone back to it now, but the two are not even in the same ballpark. With the "internet share" all I had to do was simply plug in my phone and bam! With the "modem link", I have to make sure my phone is now hooked to the internet (I have direct push activated). if I don't do this, it might take longer for the "link" to happen. I then have to dial in with the modem.....blah...blah....blah! As stated once you haave experienced the "internet share".................WOW!
True enough, it's a world of difference, I wonder how hard it would be to port internet share to AKU 2.3? actually scratch that, that's time better spent working on getting 3.2 working perfectly.
Modem Link and Internet Sharing both have their advantages and disadvantages. Please read the AKU3 Networking Bible at http://forum.xda-developers.com/showthread.php?t=282780 - in there, I'ce explained EVERYTHING about all these issues. (And please DO follow my articles... I post them all to the General forum on purpose - so that they are read and people profit from them. Keep an eye on the General forum.)
Menneisyys said:
Modem Link and Internet Sharing both have their advantages and disadvantages. Please read the AKU3 Networking Bible at http://forum.xda-developers.com/showthread.php?t=282780 - in there, I'ce explained EVERYTHING about all these issues. (And please DO follow my articles... I post them all to the General forum on purpose - so that they are read and people profit from them. Keep an eye on the General forum.)
Click to expand...
Click to collapse
Very nice thread that Bible...
--M
How do you set up internet share with windows xp and cingular? I'm not sure what steps to take, ive been trying to figure it out for the past 2 hours.
ummm if ur on aku 3x just run the program and plug the usb cable and select 'connect' ........its not that hard
Hook usb cable of phone to computer. click internet share and click connect...serve the 'net with your computer.
GiMPiN said:
How do you set up internet share with windows xp and cingular? I'm not sure what steps to take, ive been trying to figure it out for the past 2 hours.
Click to expand...
Click to collapse
Hi
I Loaded the new MolzKi roM update aku 3.2 and love it, it works perfectly, but I see he has changed modem dial up to internet sharing
I am glad because modem dialup had a lot of problems
They main problem I am having is that windows XP requires a Driver for internet sharing and I don't have it, does anybody know where I can possibly get it? as I use the net on laptop a lot and need it asap
Thanks
Download the latest version of Activesync, or at least version 4.2. After you turn on Internet Sharing, connect the device to your computer.Then just open a browser and surf the web. There are no extra drivers or set up required. That's why we love aku 3.2.::: Posted from my Wizard :::
Yass3r said:
Hi
I Loaded the new MolzKi roM update aku 3.2 and love it, it works perfectly, but I see he has changed modem dial up to internet sharing
I am glad because modem dialup had a lot of problems
They main problem I am having is that windows XP requires a Driver for internet sharing and I don't have it, does anybody know where I can possibly get it? as I use the net on laptop a lot and need it asap
Thanks
Click to expand...
Click to collapse
Please do read my articles and use the forum engine to find my previous oens, I've also explained this issue in the AKU3 Networking Bible ( http://forum.xda-developers.com/showthread.php?t=282780 ).
hi all:
can anyone help me use DUN on WM5, am using explode's AKU 3.5 ROM.
everything working fine but no success to connect BA to laptop and use it as a modem.
any alternatives?, i have read explode's thread but no info. that would help.
is there a .cab file to fix this?
i hope someone has a fix for this.
thx
Active Sync?
Is the Active Sync on? Turn it off before you connect to the computer.
DUN isn't recommended on WM5 anymore. It has a much better system, usually called "internet connection sharing". It works much like ICS on a windows PC and is far better than DUN.
There is some info on this inside some of the discussions for the recent ROM releases. A search should find what you are after.
I think its not only recommended but its no more supported in AKU 2 or 3 - not sure which one but I read it in some of the msdn blogs.
hello,
i've just upgraded to wm2006. before when i've placed the device in the dock it would use my pc's internet connection and i could be able to surf via pocket ie or update weather info etc. doesnt seem to work after the upgrade. any ideea?
device is an o2 xda II, active synch 4.5.0 (build 5096), win xp.
any ideeas?
thanks.
mindwar said:
hello,
i've just upgraded to wm2006. before when i've placed the device in the dock it would use my pc's internet connection and i could be able to surf via pocket ie or update weather info etc. doesnt seem to work after the upgrade. any ideea?
device is an o2 xda II, active synch 4.5.0 (build 5096), win xp.
any ideeas?
thanks.
Click to expand...
Click to collapse
Did you turn this option on in AS? Firewall isn't blocking it? Then... make sure you didn't screwed internet options in Settings->Connections - it should be automatic.
utak3r said:
Did you turn this option on in AS? Firewall isn't blocking it? Then... make sure you didn't screwed internet options in Settings->Connections - it should be automatic.
Click to expand...
Click to collapse
well when i fist got the device and installed active synch it just worked. didnt have to change anything.. any special setting i need to make after upgradeing from 03 to 06?
not running any firewall (windows one included)
settings->connection doesn't show any connection. under the advanced tab "use work network" is selected.
mindwar said:
didnt have to change anything.. any special setting i need to make after upgradeing from 03 to 06?
not running any firewall (windows one included)
Click to expand...
Click to collapse
OK - which ROM did you flash? Check your "Settings->connections->USB-to-PC", it should have "Advanced networking" checked on.
mindwar said:
settings->connection doesn't show any connection. under the advanced tab "use work network" is selected.
Click to expand...
Click to collapse
Well, that's perfect...
utak3r said:
OK - which ROM did you flash? Check your "Settings->connections->USB-to-PC", it should have "Advanced networking" checked on.
Well, that's perfect...
Click to expand...
Click to collapse
used TOFCLOCK HIMA WM6 AKU.0.7.0 CE OS 5.2.1908 (Build 18508.0.7.0)
advanced network functionability is checked.
mindwar said:
used TOFCLOCK HIMA WM6 AKU.0.7.0 CE OS 5.2.1908 (Build 18508.0.7.0)
advanced network functionability is checked.
Click to expand...
Click to collapse
Hm.
After flashing AS performed a new device setup, right? The last question (after setting up, which items are to be synchronized) is this device is allowed to use Internet connection. Are you sure you've checked it? If so... well, I don't know
same problem here... and i am sure i checked the use of internet conection...
utak3r said:
Hm.
After flashing AS performed a new device setup, right? The last question (after setting up, which items are to be synchronized) is this device is allowed to use Internet connection. Are you sure you've checked it? If so... well, I don't know
Click to expand...
Click to collapse
hm, dont remember beeing asked that..
any way i can set it up without reflashing?
mindwar said:
any way i can set it up without reflashing?
Click to expand...
Click to collapse
Of course. In AS (while having PDA unconnected) choose "delete partnership", and then connect your Hima, it will resetup the partnership.
utak3r said:
Of course. In AS (while having PDA unconnected) choose "delete partnership", and then connect your Hima, it will resetup the partnership.
Click to expand...
Click to collapse
did that, still the same unfortunatly.
though i did find out that wm06 creates a local area connection.
i tried to share my desktop's internet connection with the wm created one but still nothing yet.
doesn't anyone with wm6 use internet connection through usb or craddle???
boditza said:
doesn't anyone with wm6 use internet connection through usb or craddle???
Click to expand...
Click to collapse
Well, I am using. Everyone's using It's just it's working perfect for most of us... I really have no idea, what's going on with you two
ok. google helped me find an answer on another board.
for anybody intrested - http://www.aximsite.com/boards/activesync/137666-fix-unknown-error-0x80072f78.html
(hope there's no problem with posting the link but i figured someone might need this too).
cheers utak3r for the help!
thanks for share...
mindwar said:
hello,
i've just upgraded to wm2006. before when i've placed the device in the dock it would use my pc's internet connection and i could be able to surf via pocket ie or update weather info etc. doesnt seem to work after the upgrade. any ideea?
device is an o2 xda II, active synch 4.5.0 (build 5096), win xp.
any ideeas?
thanks.
Click to expand...
Click to collapse
I had the same problem and I solved using using Activesync serial connection, see my post #45 :
http://forum.xda-developers.com/showthread.php?t=329202&page=5
ciberus said:
I had the same problem and I solved using using Activesync serial connection, see my post #45 :
http://forum.xda-developers.com/showthread.php?t=329202&page=5
Click to expand...
Click to collapse
thanks ciberus. I've managed to find an answer without needing to change connection type. see my post above.
glad you've posted though so we can have both solutions in a single place (I wasn't able to find your post by searching the forums before I started this thread). cheers
Mine got solved like this...
http://forum.xda-developers.com/showthread.php?p=3787583#post3787583
Cheers
For many of us having BBC running is imperative for our proper "being connected".
RIM choose to be strict on blocking "unsupported" devices and BBC client versions. There is 2 major releases of Blackberry Connect - BC client version 2.X is stable, but limited on features and version 4.X, which has few welcomed additions, but also introduces quite few annoying problems. In this thread we can share our findings, which are either specific to Kaiser / Tilt or do apply to any device.
As a thread starter, I'll bring in the good news for those interested in making BBC2.X running on Kaiser / Tilt - it's simple. In addition to my signature's HEXing of any current WM6 .nbh ROM files, one would simply replace the unicode string "HTC-Kaiser" to "HTC-Hermes" , reflash, change the Aku string to .2.3.0 and BBC2 will work as a charm.
BBC threads collection:
=================
http://forum.xda-developers.com/showthread.php?t=294218
http://forum.xda-developers.com/showthread.php?t=409964
http://forum.xda-developers.com/showthread.php?t=395390
And if you aren't comfortable hex-editing your ROM, the 4.x version of BBC is supported on the Kaiser and Tilt. See these threads for more information.
http://forum.xda-developers.com/showthread.php?t=327695&highlight=blackberry
http://forum.xda-developers.com/showthread.php?t=330910&highlight=blackberry
HELP!! Blackberry Connect NOT working
Hello I have tried to get the BBC 4 working on my kaiser without success, on the kaiser I get a Pin Assigned, service connected and all but I don't get ANY email, the lookups all fail, the email I send from the Kaiser don't get sent but I don't get any error messages.
When I check the Blackberry connect desktop I see that it says PIN: unknown type, if I sync the device again I get a success message but again an unknown pin type
I'm using:
HTC Original ROM
Blackberry Version: 4.0.0.84
Transport Version: 4.0.0.86
Blackberry Enterprise Server: 4.1.2
System Version 77.122.174.117
I am on a coporate BES, which officially doesn't support BBC, is there any way they can block BBC devices?
Please any help will be greatly appreciated.
Thanks!!
Vinny
Connected. You just have to get provisioned.
jvloyola said:
Hello I have tried to get the BBC 4 working on my kaiser without success, on the kaiser I get a Pin Assigned, service connected and all but I don't get ANY email, the lookups all fail, the email I send from the Kaiser don't get sent but I don't get any error messages.
When I check the Blackberry connect desktop I see that it says PIN: unknown type, if I sync the device again I get a success message but again an unknown pin type
I'm using:
HTC Original ROM
Blackberry Version: 4.0.0.84
Transport Version: 4.0.0.86
Blackberry Enterprise Server: 4.1.2
System Version 77.122.174.117
I am on a coporate BES, which officially doesn't support BBC, is there any way they can block BBC devices?
Please any help will be greatly appreciated.
Thanks!!
Vinny
Click to expand...
Click to collapse
Does any have a bb connect working (BES) on any of the upgraded roms? Tried version .84 and .90 on helmis big storage rom and it would connect for a second and then disconnect. So i switched back to the HTC Rom.
by the way i'm using 4.0.0.84. without any problems.
HExing you should be able to make any BBC client to connect on Hermes or Kaiser/Tilt with any current WM6 ROM.
hidefguy said:
Does any have a bb connect working (BES) on any of the upgraded roms? Tried version .84 and .90 on helmis big storage rom and it would connect for a second and then disconnect. So i switched back to the HTC Rom.
by the way i'm using 4.0.0.84. without any problems.
Click to expand...
Click to collapse
hidefguy said:
Does any have a bb connect working (BES) on any of the upgraded roms? Tried version .84 and .90 on helmis big storage rom and it would connect for a second and then disconnect. So i switched back to the HTC Rom.
by the way i'm using 4.0.0.84. without any problems.
Click to expand...
Click to collapse
I've found a solution to the problem you describe - see my post here:
http://forum.xda-developers.com/showpost.php?p=1608560&postcount=7
Problems getting provisioned
moisha said:
Connected. You just have to get provisioned.
Click to expand...
Click to collapse
That is precisely the problem when aI try to provision my kaiser via BBC Destop I get a sucess mesage but nothing happens, and every time I connect the kaiser says your email is set up for pin "unknown" do you wan to chang it to pin XXXXX?
So I guess I'm not getting provisioned right.
Any ideas?
Vinny
Hello moisha,
i am a bit confused. I had Blackberry 2.1.x running on my Hermes with a patched WM 6 Version. Now I try to implement it myself on my new Kaiser (t-mobile Germany). So far I followd the instructions under
I have not been successful so far. You recommend just to hex HTC-Kaiser to HTC-Hermes. I tried with Hexedit but could not find the string in the nbh file. I use the HTC German ROM for Kaiser (KaiserHTC_GER_1.56.407.3Reconstructed). Can you give me some more hints, how to proceed ???
Thanks ...