I've been Using Xplode ROM AKU3.3 R1 and I'm very pleased with the Software.
I used with Garmin Mobile XT 383180 Beta and I don't have a single Problem !!!
Thanks Xplode !!! But I miss the keylock button except power button like on Helmi AKU 3.2. Can somebody give me the cab for that ?
Thanks in Advance.
Assuming your using WM5, I'm fairly sure that's a standard option that can be controlled in "Settings" under the "System" tab and finally using the "Button Lock" icon.
It's one of the first things I turn on when resetting my device.
Thanks for your reply Percz, I know what you mean. Everytime I used device lock option on WM5 I still can turn on the device by pressing front button. I want the software ( like on Helmi ROM AKU3.2 ), when I turn off the power button I'mnot able to turn on my device except press power button.
Thanks Again. I hope Helmi can read this too,...
You can try this:
Settings -> Personal tab -> Buttons -> Lock Tab
"Lock all buttons except Power button"
It's work for me - xplode 3.3 r1 version
Wow ! Thanks alot miltb !!! It works now !
Thanks Again Guys !!!!
This has been built-in to every mobile build I've tested, including wm2003.
Related
and I have done this before but have searched and searched and cant find.
I have WM5 on BA as I said and need the button lock to appear under settings, Have tried the button fix on wiki no joy..
Any ideas and a pointer to the file would be great..
thanks in advance
There are two button lock applets in your control panel, one being in Personal > Buttons and the other in System > Button Lock. Now in all honesty I can't remember which one it is which does work, but one of them does, so set both of them to Lock all buttons except Power button.
Hope this helps!
Leo
There are several applications which allows you to remap buttons (AE Button Plus, HButton...). If you dont need more than 6-8 shortcuts you should be fine with this. (I prefer this remapping solution because it doesnt require to keep some program running in RAM)
These shortcuts are basically generic but here's what I've found and tested on Wings.
Code:
Shortcut Current App. Remapping
Long_POC.lnk - OK
Long_End.lnk Lock Not tested
Long_Home.lnk - OK
Long_Send.lnk - OK
Short_POC.lnk CommManager OK
Long_Power.lnk Turn Off OK
Long_Pound.lnk Line Switch ???
Long_VolUp.lnk Voice Dial. OK
Long_Camera.lnk Camera OK
Short_Power.lnk Quick App. OK
Short_Camera.lnk Camera OK
Long_VolDown.lnk Voice Notes OK
Long_NonCamera.lnk ??? ???
Short_NonCamera.lnk ??? ???
(NonCamera = POC on some devices. I dont know why is it on Wings but probably because of generic WM keypad map.)
Code:
Key Name Hardware Button
POC CommManager
End End Call
Home Home
Send Send Call
Power Turn On/Off
VolUp Volume Up/+
Camera Camera
VolDown Volume Down/-
How to use...
1. Create a shortcut of a program
2. Rename the shortcut to the shortcut name of a key you want to asign to (TaskManager.lnk to Long_Home.lnk for example)
3. Copy it to \Windows\ directory
Wow! Awesome! Thanks for shedding light on this!
Tested short_power.lnk successfully.
[ADDITION]
IE button: is PIE.lnk + Short_IE.lnk.
About
If you need turn on WiFi, you have to press at least 4 keys by default to start WiFi (using Comm Manager).
After installation of WirelessToggle, just press and hold Comm Manager button to toggle Wifi (on/off). (Alternatively you can use attached exe and assign WirelessToggle to any button / shortcut you want to).
And as always: There are few more programs that can be used for faster turning on/off WiFi but this keeps the RAM free as much as possible.
Installation:
WirelessToggle.cab - just install
Run WirelessToggle.exe (from \Program Files\smartmadsoft\WirelessToggle) manually (just once) before using the shortcut (otherwise you wont be able to confirm dialog window asking you about running unsigned code)
Download:
WirelessToggle.zip (4 kB)
Support:
Tested only on S730 but it should work on other devices as well (will test it later).
Great work moneytoo!
This is real usefull, thanks for sharing!
does anyone know the WM6.1 connection manager (wireless manager in home screen) file name?
wireless toggle doesn't work for me (wm6.1) it removes all wireless settings from the WM comm manager, and swiches wireless off right after I've enabled it.
i need to look into this, whether it will work on a diamond, cause it's hardware button associations are plain stupid...
tuem said:
i need to look into this, whether it will work on a diamond, cause it's hardware button associations are plain stupid...
Click to expand...
Click to collapse
Does it work on the Diamond? I'm getting a Touch Pro in a month and I really hope it works...
tuem said:
i need to look into this, whether it will work on a diamond, cause it's hardware button associations are plain stupid...
Click to expand...
Click to collapse
What did you find out?
Does it work on your Diamond?
i right clicked on psshutxp.exe and selected create a shortcut.. i renamed file to Long_Power.lnk .. dropped in my windows folder and reset my htc touch pro (cdma) ,,, never asked if i wanted to overwrite anything ...
now when i press down my power button... the same default action happens... it is not running psshutxp....
Remapping headset button?
I'd like to bounce an idea and see if your solution might work for this specific issue.
Seems like the headphone button = green answer button on newer htc systems. If I press the headhpone button twice - I'd like to jump one track forward. Press it three times, I'd like to jump one track back again. Would this be possible to map somehow? That is, multiple key inputs?
Regards.
Has anyone here found a solution for the touch diamond?
Wrong forum m8, this is the Wings smartphone, not the Diamond pocketpc
spone1 said:
Wrong forum m8, this is the Wings smartphone, not the Diamond pocketpc
Click to expand...
Click to collapse
I know that this is the Wings forum but nevertheless I would like to know if anybody has found a similar mapping functionality for the HD2... I tested several shortcuts but only long_send.ink seems to work.
For Multibuttonmappingwhatsoever I can recommend HButton as it allows to activate different things depending on how long you press the button. Remapping doesnt really work for me after all, nothing happens..
Hi, I want to remmap Home Button in HTC HD2(Leo). But when I search the link, I can't find anything that mention about home.
Any suggestion? Thx..
R0b3rt2 said:
Hi, I want to remmap Home Button in HTC HD2(Leo). But when I search the link, I can't find anything that mention about home.
Any suggestion? Thx..
Click to expand...
Click to collapse
Oooopss.. Sorry, wrong thread.
I'm just too desperate.
For the HD2 unfortunately only the long_send button seems to work. I tested the others mentioned on the first page of this thread but they did not work - at least not by using shortcuts or reg keys (but I did not test any special software as HButton).
Anyone know how to remap the power button to long key press program that allows a handfull of options? Schaps has done this with his newest 4.1 rom but i want it on dutty's v1.1 rom i keep flashing back to. I have the long key press button but it needs to be assigned to the power button. Anyone know how? Thanks!
Bump for some input.
Um?
So 136 views and no replies? Does this mean theres no possible way to remap the power button on the side of our phones?
Maybe people are just hoping you'll give in and try a search?
This is what you're looking for: http://forum.xda-developers.com/showthread.php?p=1783616#post1783616
se0siris said:
Maybe people are just hoping you'll give in and try a search?
This is what you're looking for: http://forum.xda-developers.com/showthread.php?p=1783616#post1783616
Click to expand...
Click to collapse
I always search before posting and yes i did read this thread u gave the link for before i started this thread. I already have the end key set and if u read my post and the link u provided u will see it does not answer my question. im again looking for the end key program schaps cooked into his newest 4.31 rom for the power button. the link u provided talks about the end key or red
phone symbol button. im looking for the program schaps uses when u hold down the power button which im sure u know is on the top right side of the tilt phone with a picture of a circle and a line through it all in red. the end key program schaps uses allows the user to hold down the power button like they would to power down their device but instead of the tacky looking yes or no window that pops up, a different end key screen pops up asking if u want to power down, soft reset, suspend screen, etc. this is a nice feature i am looking to add to the current rom i am using. if youve tried schaps 4.31 rom im sure youll know what im talking about. thanks!
He said (I think) he'd release it as a cab (along wtih this advanced config 2.0) at some point.. so if he hasn't announced yet I don't think it's out, unless you check around that rom thread of his, someone mgiht have made a cab for it but not put it out for download yet.
Oh
briggs81 said:
He said (I think) he'd release it as a cab (along wtih this advanced config 2.0) at some point.. so if he hasn't announced yet I don't think it's out, unless you check around that rom thread of his, someone mgiht have made a cab for it but not put it out for download yet.
Click to expand...
Click to collapse
Well if u or anyone else comes across this cab file it would be much appreciated! i love his new advanced config. 2.0, very clean. i thought the power end key program schaps uses on his 4.31 rom was out, i didnt know it wasnt released yet. his advanced config 2.0 should be out soon cus dutty said hes gonna have itcooked into his new v4 rom coming out round tuesday! maybe this power end key program will be out then or better yet cooked into dutty's v4 rom? that would be perfect! until then, if anyone has a cab for this power button end key program schaps uses in his 4.31 rom please post the cab. thanks everyone!
The only way I know of is to use AE Button Plus. It will allow you to remap many things such as volume slider, jog wheel, power button, etc...
If you're interested in a beta I have a limited number.
Not totally sure what you mean when you say "long key press program that allows a handfull of options", but I will take a crack at it.
If you are referring to the EndKey application that allows you to turn on flight mode, switch to vibrate, etc... and you want to assign that app to a long press of the power button then do the following:
There should be a shortcut for EndKey application in your \windows\startmenu\programs folder. Copy that shortcut and rename it to "Long_Power.lnk", move the new shortcut into the \windows directory, then test. You may need to reboot if it doesn't work right away.
Here is where I found that info
http://forum.xda-developers.com/showthread.php?t=356322
GSLEON3 said:
The only way I know of is to use AE Button Plus. It will allow you to remap many things such as volume slider, jog wheel, power button, etc...
If you're interested in a beta I have a limited number.
Click to expand...
Click to collapse
I would be interested in trying out the beta. From what I've read on various sites, this program seems to be exactly what I am looking for to remap several buttons on my Tilt.
Another way...Take the shortcut you want to assign to the power button & rename it Short_Power.lnk (for standard push) or Long_Power.lnk (push & hold) & then moove the .lnk to the windows folder. It will work immediately.
any word of the cab being released yet?
well, doesn't seem to work in 6.5/ Vogue ("touch")
deeznuts said:
Anyone know how to remap the power button to long key press program that allows a handfull of options? Schaps has done this with his newest 4.1 rom but i want it on dutty's v1.1 rom i keep flashing back to. I have the long key press button but it needs to be assigned to the power button. Anyone know how? Thanks!
Click to expand...
Click to collapse
If you link to the program/package/cab you want to link up to power button I probobly can make a cab for you.
This may help.
To just wake up the device without pressing Power, Start > Settings > System > Key Lock, & select "Do not lock buttons."
You may now use any button to simply wake it up.
With the limited Hardware buttons on the diamond I find apps like HButton indispensable.
I have tweaked mine to suit the Default Diamond layout very nicely
Looks like it was meant to be like this from HTC
Link to a video clip of how it works.
http://home.telkomsa.net/edgepc/HButton.AVI 2meg
Mine is set to Cycle through the following apps
Voice Dial
Note2Self
Comm Manager
HButton Vibrates on each switch so it is easy to select the right app without looking at the device
Attached is a pic of the config screen to show you how to set it up like mine and a screenie of it in action
Link to Hbutton
http://forum.xda-developers.com/showthread.php?t=306794
Enjoy
Jules
thanks for the tip..very useful.
That was a really cool application indeed. Thank you!
Thank you, muy buena
Very interesting, THX!
sssssssssssssssssensational!!!
Oooh
It is even better for Diamond than my friend's AEbutton Plus wich Id used before! (Don't tell him please
Thankss!
Hi,
I tested Hbutton, but it seems I can only assign the call button (hold).
There is no other buttons available.
Anybody have the same problem ?
Thanks
Yea only one button but its better than nothing
Jules
I'd also pick HButton IF it were possible to assign the "<--" button.
With AEButton I can do this, so sticking to that for now.
hbutton settings
Which HButton is the call button on? Hope I can get this working it was great on my vario 3.
Pete
hbutton on diamond
Looks like I cant even see any buttons in settings/buttons. I think T-Mobile have locked even the call button!
Pete
Thank you.
Thats really nice program.
If you have spb pocket plus installed you can assign to the ok key
this allows you to also assign a Hbutton to the key in the buttons dialog
therefore giving to h button enabled keys (Which is excelent
tried it ... adopted it
Thx.
Perfect completion for VoiceCommand.
Just set the "HButtonX.lnk" to toggle WLAN and rename it to "WLAN.lnk" or "WiFi.lnk"
After a soft reset you can switch on and off WiFi by starting this "App" with VoiceCommand.
this is genius!
thanks a lot
cookie1977uk said:
If you have spb pocket plus installed you can assign to the ok key
this allows you to also assign a Hbutton to the key in the buttons dialog
therefore giving to h button enabled keys (Which is excelent
Click to expand...
Click to collapse
There is no key in the buttons dialog, that's my problem. How do I get one there?
Pete
No Hbutton in T-Mobile MDA Compact IV
Same here,I can't see HButton listed under buttons application.Looks like T-Mobile has removed it.Only Diamond people can see it.
Thanks
hello, is there any why to anable the standart keylook from win mob 6.5 when the device wake up ? when i press the pwoer button the device wake up but the are no look screen using the Touch-IT_Leo_v11_ger but had this problem with all roms ive tested. so is there any way to enable this?
Hi ngt1337,
what is the keykook? Do you mean Keylock or standard WM6.5 Today look?
If you need key lock, just press the end key and keep it pressed until the screen lock. Then, only the power button will work.
If you want normal WM6.5 look, well, flash a plain WM6.5 ROM or disable Manila in Settings --> today.
Hope this is what you were asking for.
i want to use the standart screenlook from winmobile 6.5 but i want it when i press the power button and then device wakes up on the lookscreen when i press the end key button and hold it nothing happens
Which ROM are you currently using? It is strange that the endkey does not work. Search for "lock app" in Application section of X1 forum, there was a program like the one you are asking for (can't remember the name, sorry).
Touch-IT_Leo_v11_ger und auch X1O_LEO_21876_Final_R3A_Hybrid_German at both nothin happen when i press and hold the key... any solutions ?
how to enable this when device wakes up???
only want to see this when device wakes up ( or when i press the power button )
what must i do to see this when device wakes up?
keylock
you wil have to install THIS!!
When you have installed Smartlock you must go to the settings of it en mark only WM 6.5 New lock and Stand-by trigger lock screen
I use it with Touch IT leo v11 NLD!
works perfactly thanks so mutch!