Database Develop

hold comm to vibrate?

Anyone figured out how to map to a different button? This is the one feature i miss.
-mix

mixmaven said:
Anyone figured out how to map to a different button? This is the one feature i miss.
-mix
Click to expand...
Click to collapse
Does this work?

That is what I tried, but there isn't a comm button on the Kaiser... It didn't work on any of the buttons I found. Does anyone know the reg key? we could probably change it to the ok/close button instead. I emailed kyphur to see if he knows...
-mix

mixmaven said:
That is what I tried, but there isn't a comm button on the Kaiser... It didn't work on any of the buttons I found. Does anyone know the reg key? we could probably change it to the ok/close button instead. I emailed kyphur to see if he knows...
-mix
Click to expand...
Click to collapse
Use "Vibra Switch" then Do a seach its on XDA.

wpbear said:
Use "Vibra Switch" then Do a seach its on XDA.
Click to expand...
Click to collapse
I tried this, and it's a good concept, except the AT&T ROM doesn't expose PTT as a possible button mapping, which means one of the existing start/PIE/messaging/ok/camera buttons would have to be sacrificed for a vibe toggle.
The superfluous PTT button is the obvious candidate for a vibrate toggle but sadly neither of the suggestions allow its use as such.

niralisse said:
I tried this, and it's a good concept, except the AT&T ROM doesn't expose PTT as a possible button mapping, which means one of the existing start/PIE/messaging/ok/camera buttons would have to be sacrificed for a vibe toggle.
The superfluous PTT button is the obvious candidate for a vibrate toggle but sadly neither of the suggestions allow its use as such.
Click to expand...
Click to collapse
As the 8525 was eventually hacked for the PTT button to be useful you will have to be patient. This device is new so it takes time.

This works fine, load Vibra Switch, it will place 2 apps in the programs folder "Vibra Switch" and "Vibra Switch Delayed" (you can delete that one). Then in Settings>buttons> Select button 6, the top-left button currently used for single-press=Voice Speed Dial, press-and-hold=Recorder, re-assign the "press-n-hold button to be "Vibra Switch" and you are done.
I've been listing my tweak tries in amother thread, I can't get Bluetooth to redirect all sounds out to headset and I also can't get vjay lumos III to make the display go super bright. With no transreflective screen, this is now a very important tweak to me, I hope these can be figured out.

ahhhhh sweet. you guys are great!
-mix

RemE said:
This works fine, load Vibra Switch, it will place 2 apps in the programs folder "Vibra Switch" and "Vibra Switch Delayed" (you can delete that one). Then in Settings>buttons> Select button 6, the top-left button currently used for single-press=Voice Speed Dial, press-and-hold=Recorder, re-assign the "press-n-hold button to be "Vibra Switch" and you are done.
I've been listing my tweak tries in amother thread, I can't get Bluetooth to redirect all sounds out to headset and I also can't get vjay lumos III to make the display go super bright. With no transreflective screen, this is now a very important tweak to me, I hope these can be figured out.
Click to expand...
Click to collapse
Use a little app called "BTaudio toggle" it works good for me!

Love you spiro! Searched and found BTaudio.exe, Life is good! With my 8525 I had to use Mortscripts, this is easier. Pressing my Jawbone headset button launches VoiceDialer and kills the re-direct, but that's no big deal. I like that I can now launch Voicedialer.
Last tweak remaining is a single button toggle to BRIGHTEN the screen!

Vibra Switch not working
I installed Vibra Switch in my new Tilt but is working as described. Anyone knows why?

i'm not sure about the commands to switch to vibe mode ( i use phone suite) but to expose the PTT button (short and long)
try adding a couple of new reg keys 40C6 and 40C7 in HKLM/software/microsoft/shell/keys. mimic the the keys and values on 40C5 and then soft reset.... it will then show up in the button control panel.
for reference, this is where i got it...
http://forum.xda-developers.com/showthread.php?p=1577293

paulsuerth said:
i'm not sure about the commands to switch to vibe mode ( i use phone suite) but to expose the PTT button (short and long)
try adding a couple of new reg keys 40C6 and 40C7 in HKLM/software/microsoft/shell/keys. mimic the the keys and values on 40C5 and then soft reset.... it will then show up in the button control panel.
for reference, this is where i got it...
http://forum.xda-developers.com/showthread.php?p=1577293
Click to expand...
Click to collapse
Yes, I can confirm this works well. I've mapped a long press of my PTT button to Vibra Switch, so I just hold it down to toggle between ring and vibrate.

RemE said:
Last tweak remaining is a single button toggle to BRIGHTEN the screen!
Click to expand...
Click to collapse
I created a shortcut to the backlight application in /Windows/Programs and then mapped it to a button. A single push of that button brings up the backlight app, from there you can use the right directional button to increase brightness in steps. Biggest problem for me was adjusting brightness outside on a sunny day where the screen can not be seen - this fixes that for me.

How do I remap the side "OK" button?

Hi,
The OK button at the side of the device is not "connected" to the OK button on the face of the device.
I was wondering if anyone knows how to remap the side-ok button to do something else.

I would love to know the same.
The killer app for this button for me would be as a 'back' button for pocket IE, which means it'd hit the left soft button.

shaharprish said:
I was wondering if anyone knows how to remap the side-ok button to do something else.
Click to expand...
Click to collapse
Without third-party apps.....you can't

Moaske said:
Without third-party apps.....you can't
Click to expand...
Click to collapse
Well then, how about WITH third party programs? AE Button Plus can't do it. What other ones can?

The side "ok" button is a tough one because it has multiple functions. In programs, explorer windows, and settings it acts as an OK button but when you're at the today screen it acts as a Start Menu button. I kinda get the feeling we're not going to be able to change this for a while. Not until someone releases a keymapper specifically for the Kaiser.

Whats wrong with the ok button?
its like an alt-tab to the today screen! so awesome.

even with the 8525 nobody has been able to re-map the ok button...it's still the biggest mystery, hehe....but now that they eliminated one button on the Tilt we really do need the ability to remap the ok button now...

I didn't have much luck remapping the OK button either. In AE Button it sort of maps to the Windows button, and I was able to change it...but never was able to get everything else working right after that and had to put it back.

I don't know the kaiser, but isn't Hbutton a solution for remapping hardware-keys ? On my Artemis i'm very happy with it...

Hbutton does not work on Tilt. especially setting it up
petervbeck said:
I don't know the kaiser, but isn't Hbutton a solution for remapping hardware-keys ? On my Artemis i'm very happy with it...
Click to expand...
Click to collapse
is the same issue in Kiaser as well?

SPB Pocket Plus can remap this button.

Blowfish64 said:
Well then, how about WITH third party programs? AE Button Plus can't do it. What other ones can?
Click to expand...
Click to collapse
For me AE Buttons Plus did work. Then I wrote a MortScript to have the button act as a back button only in PIE:
http://forum.xda-developers.com/showthread.php?t=342464
Hope this helps.

v3patel said:
is the same issue in Kiaser as well?
Click to expand...
Click to collapse
now i got an kaiser and using hbutton of course - working very well, mapped "OK/Close" and CommManager to the ok button and no issues.
Hbutton is one of the best ppc apps imo.
edit - damn - i remaped the front ok button - the side ok button can't be remaped with hbutton afaik.....sorry, my mistake...

I have the side OK button remapped in spb pocket plus v4 under the buttons menu in settings and the only thing you have to do is take focus off the start menu then it works as expected.
Russ

Remapping hardware buttons

There are several applications which allows you to remap buttons (AE Button Plus, HButton...). If you dont need more than 6-8 shortcuts you should be fine with this. (I prefer this remapping solution because it doesnt require to keep some program running in RAM)
These shortcuts are basically generic but here's what I've found and tested on Wings.
Code:
Shortcut Current App. Remapping
Long_POC.lnk - OK
Long_End.lnk Lock Not tested
Long_Home.lnk - OK
Long_Send.lnk - OK
Short_POC.lnk CommManager OK
Long_Power.lnk Turn Off OK
Long_Pound.lnk Line Switch ???
Long_VolUp.lnk Voice Dial. OK
Long_Camera.lnk Camera OK
Short_Power.lnk Quick App. OK
Short_Camera.lnk Camera OK
Long_VolDown.lnk Voice Notes OK
Long_NonCamera.lnk ??? ???
Short_NonCamera.lnk ??? ???
(NonCamera = POC on some devices. I dont know why is it on Wings but probably because of generic WM keypad map.)
Code:
Key Name Hardware Button
POC CommManager
End End Call
Home Home
Send Send Call
Power Turn On/Off
VolUp Volume Up/+
Camera Camera
VolDown Volume Down/-
How to use...
1. Create a shortcut of a program
2. Rename the shortcut to the shortcut name of a key you want to asign to (TaskManager.lnk to Long_Home.lnk for example)
3. Copy it to \Windows\ directory

Wow! Awesome! Thanks for shedding light on this!
Tested short_power.lnk successfully.
[ADDITION]
IE button: is PIE.lnk + Short_IE.lnk.

About
If you need turn on WiFi, you have to press at least 4 keys by default to start WiFi (using Comm Manager).
After installation of WirelessToggle, just press and hold Comm Manager button to toggle Wifi (on/off). (Alternatively you can use attached exe and assign WirelessToggle to any button / shortcut you want to).
And as always: There are few more programs that can be used for faster turning on/off WiFi but this keeps the RAM free as much as possible.
Installation:
WirelessToggle.cab - just install
Run WirelessToggle.exe (from \Program Files\smartmadsoft\WirelessToggle) manually (just once) before using the shortcut (otherwise you wont be able to confirm dialog window asking you about running unsigned code)
Download:
WirelessToggle.zip (4 kB)
Support:
Tested only on S730 but it should work on other devices as well (will test it later).

Great work moneytoo!
This is real usefull, thanks for sharing!

does anyone know the WM6.1 connection manager (wireless manager in home screen) file name?
wireless toggle doesn't work for me (wm6.1) it removes all wireless settings from the WM comm manager, and swiches wireless off right after I've enabled it.

i need to look into this, whether it will work on a diamond, cause it's hardware button associations are plain stupid...

tuem said:
i need to look into this, whether it will work on a diamond, cause it's hardware button associations are plain stupid...
Click to expand...
Click to collapse
Does it work on the Diamond? I'm getting a Touch Pro in a month and I really hope it works...

tuem said:
i need to look into this, whether it will work on a diamond, cause it's hardware button associations are plain stupid...
Click to expand...
Click to collapse
What did you find out?
Does it work on your Diamond?

i right clicked on psshutxp.exe and selected create a shortcut.. i renamed file to Long_Power.lnk .. dropped in my windows folder and reset my htc touch pro (cdma) ,,, never asked if i wanted to overwrite anything ...
now when i press down my power button... the same default action happens... it is not running psshutxp....

Remapping headset button?
I'd like to bounce an idea and see if your solution might work for this specific issue.
Seems like the headphone button = green answer button on newer htc systems. If I press the headhpone button twice - I'd like to jump one track forward. Press it three times, I'd like to jump one track back again. Would this be possible to map somehow? That is, multiple key inputs?
Regards.

Has anyone here found a solution for the touch diamond?

Wrong forum m8, this is the Wings smartphone, not the Diamond pocketpc

spone1 said:
Wrong forum m8, this is the Wings smartphone, not the Diamond pocketpc
Click to expand...
Click to collapse
I know that this is the Wings forum but nevertheless I would like to know if anybody has found a similar mapping functionality for the HD2... I tested several shortcuts but only long_send.ink seems to work.

For Multibuttonmappingwhatsoever I can recommend HButton as it allows to activate different things depending on how long you press the button. Remapping doesnt really work for me after all, nothing happens..

Hi, I want to remmap Home Button in HTC HD2(Leo). But when I search the link, I can't find anything that mention about home.
Any suggestion? Thx..

R0b3rt2 said:
Hi, I want to remmap Home Button in HTC HD2(Leo). But when I search the link, I can't find anything that mention about home.
Any suggestion? Thx..
Click to expand...
Click to collapse
Oooopss.. Sorry, wrong thread.
I'm just too desperate.

For the HD2 unfortunately only the long_send button seems to work. I tested the others mentioned on the first page of this thread but they did not work - at least not by using shortcuts or reg keys (but I did not test any special software as HButton).

Hard buttons assignment

Hello,
Could you confirm that only the "Call" (hold) button can be customized ? (via the out of the box settings, buttons)
Did somebody manage to customize the "OK" button (hold) ? that would work from any application ?
Thanks

flan lucky said:
Hello,
Could you confirm that only the "Call" (hold) button can be customized ? (via the out of the box settings, buttons)
Did somebody manage to customize the "OK" button (hold) ? that would work from any application ?
Thanks
Click to expand...
Click to collapse
Go Start>Settings>Buttons
That should do it.

timn2087 said:
Go Start>Settings>Buttons
That should do it.
Click to expand...
Click to collapse
Did you try that one?
With my firmware the only available button I have on the list is the call button (Button 1).
The second button is hardcoded to lock phone.
And there is not way to associate anything to any other button.
C'mon HTC, this is SICK!
Ciao,
Davide.

The second button can be assigned other functions like Data connection termination, airplane mode etc
Start - Settings - System
Long Press End Key Icon

Anyone know if AEButtons will work on the Diamond? I have used it on virtually every device I own including my touch. Waiting for a US Diamond.

Baxter said:
Anyone know if AEButtons will work on the Diamond? I have used it on virtually every device I own including my touch. Waiting for a US Diamond.
Click to expand...
Click to collapse
Yes, it works. Confirmed.

Baxter said:
Anyone know if AEButtons will work on the Diamond? I have used it on virtually every device I own including my touch. Waiting for a US Diamond.
Click to expand...
Click to collapse
It works, but you can't customize the new Back Key.

How about Hbutton? It works great on my Diamond and you can assign different programs to the Call ( hold) button at the same time.

tararura said:
How about Hbutton? It works great on my Diamond and you can assign different programs to the Call ( hold) button at the same time.
Click to expand...
Click to collapse
Yes, but only to the call button. With this phone is just like you have two buttons when you really have 9 more but you can't customize them!
Ciao,
Davide.

aydc said:
It works, but you can't customize the new Back Key.
Click to expand...
Click to collapse
That's funny because I just did.
I set the "OK key" (in AEBPlus) this way:
1: Close active application
Long: "Coreplayer"
Now that dreaded back key actually closes the running program!

On the MDA compact 4 you cant even configure the call button!

I'm using Spb Pocket plus 4.02 TF3D and the taskmanager turned off
(using SPB Shell)
OK button = close
I think it's better then AE button plus, it doesn't support ok/close together.
So with SPB pocket plus you can make an appointment and push the back button to save and close the appointment

Baxter said:
Anyone know if AEButtons will work on the Diamond? I have used it on virtually every device I own including my touch. Waiting for a US Diamond.
Click to expand...
Click to collapse
It works but with some bugs. No problem al all when TF 3D is not active as today plugin, you can configure every hard button to whatever behaviour you like. But when TF active strange things happen:
Red (hang) button, enter (circled one) and volume buttons always work in simple, double, triple and hold pressing.
Home button and return only work when you are not in home screen or if an app has been launched. Also they work if you are in home screen but after pressing start and the menu is showed.
Weird, don't you think?

top_banana123 said:
On the MDA compact 4 you cant even configure the call button!
Click to expand...
Click to collapse
Confirmed.
The best thing for MDA Compact IV is to reassign the 2nd Softbutton in the registry to VoiceCommand, make your own HButtons for WiFi-toggle e.g. and rename them.
My Perfect solution.
Daily use

fe600 said:
Confirmed.
The best thing for MDA Compact IV is to reassign the 2nd Softbutton in the registry to VoiceCommand, make your own HButtons for WiFi-toggle e.g. and rename them.
My Perfect solution.
Daily use
Click to expand...
Click to collapse
Any more detail on what registry to edit ? And why change it to voice command?

[Resolved] Remap volume control buttons

Sorry if it was already covered elsewhere, - is there any way to remap auctions for these side buttons on Diamond ? I don't change volume level that often, all done through profiles, imho up/down arrow or scroll function would be much more beneficial ...
Update: AEButton Plus does the thing perfectly, thanks to Geekess for the hint

volume up/down is OK but long press may be very useful for Explorer, task manager etc...

In other words configurable .. would be great for camera too, not easy to make pictures with central button, not stable enough ...
I did not follow development news for previous HTCs, so not sure if it was ever done before ...the fact is that these buttons are not available from Settings (

You can use PQZ II for remapping the volume key. Try to google it.

csc0503 said:
You can use PQZ II for remapping the volume key. Try to google it.
Click to expand...
Click to collapse
thanks mate, you are a star
http://www.nicque.com/PQz/PQzII.htm
no version for diamond yet, will play with WM6 version tonight ...

hertc said:
will play with WM6 version tonight ...
Click to expand...
Click to collapse
well, does not look good at the end, maybe these are hidden features, but I could not find a way of how to use the volume buttons independently (they work as Ctrl or Alt, no problem here, but I wanted to use them as one button - one action, not two buttons - one action). Another problem, Up/Down or Scroll are not available for selection as actions ....
So it should be possible to change that, the matter of finding the right program now ..
Wish there were more buttons on Diamond, or at least proper navigation buttons ...

Hmm... for me it does not work, get the message:
keyboard hook faild
any suggestions?

What works for me is AEButton Plus (payware, no affiliation). I have reconfigured my volume buttons to single press = arrow up/down and long press to volume. The program has a nice function: you can choose to let the volume buttons have their default behavior during a phonecall.
I'm using the trial right now, but if I can't find a freeware program that has the same functionality I will probably buy this.

May I ask how you've gone on with AEButton? I'd be interested to hear your long(er) term experience of having used it as it sounds like exactly what I want/need.
Mathew

all good, does what it says, configured it once and just using since ..

Tried latest HButton 2.3, but think it is not compatible ... anyone else tried it?