Related
Any of you 8125 owners who installed the imate 2.16.9.101 release have any new feedback on how it's going? Are there still issues with the connection icons or wifi connectivity?
I'm eager to get push mail working and have not been able to get a straight answer from a dozen different folks at Cingular on when their release will come out...so I might give the imate release a shot.
What about going back to the shipping Cingular version after installing the imate update - is it easy/possible? Any problems with extended ROM?
thx
I never even used the phone with the original cingular firmware, I went directly to the Q-tek Test rom. From that rom to this rom, the radios seem a little better (getting better signal, edge seems slightly faster, wifi picks up network much faster) and for some reason the whole feel is "snappier" seems like the menus and such load faster. I haven't had any stability issues, and push is working perfect.
I dont' know about the much faster part, but mine is very stable since i removed battery pack pro. I have SPB's power plus as well as their weather software.
if there are any software you want tested just let me know. Well if I can atleast run it without having to buy it, (i.e. Demos, etc.)
Bluetooth, Wifi, Edge, and signal are all real good. (signal on par with 1.12 radio as well as faster to get a signal than it was)
Battery icon is NOT on the bottom and does NOT show more than 2 bars ( so you have full, somewhere in between, and low).
Battery life seems pretty good, but I can't compare it to any other version as I had the phone 36 hours before I upgraded it to this version.
Great thanks for the feedback yall. So once I do the upgrade, how hard will it be to go back to the shipped version if I ever need to? I have everything backed up using awizard, but I understand there could be problems trying to go to a previous version. I think downgrading via the bootloader mode requires executable rom images, but there isn't one available for the shipping version.
You can still downgrade to an old imate ROM and then use aWizard to restore your cingular ROM.
I have installed it on my Qtek 9100.
I hanged 5 times in 2 days.
What is more annoying is when it hangs and
someone tries to call me at the same time, the
other party hears my phone ringing, but my
Qtek is dead silent.
ethorn said:
I dont' know about the much faster part, but mine is very stable since i removed battery pack pro. I have SPB's power plus as well as their weather software.
if there are any software you want tested just let me know. Well if I can atleast run it without having to buy it, (i.e. Demos, etc.)
Bluetooth, Wifi, Edge, and signal are all real good. (signal on par with 1.12 radio as well as faster to get a signal than it was)
Battery icon is NOT on the bottom and does NOT show more than 2 bars ( so you have full, somewhere in between, and low).
Battery life seems pretty good, but I can't compare it to any other version as I had the phone 36 hours before I upgraded it to this version.
Click to expand...
Click to collapse
Is your wifi working OK? If so, did you install any of the cingular exrom customizations?
Just curious, because I installed the released imate rom and everything is working like a champ except wifi. I installed some of the original customizations from the cingular exrom and I wonder if one of those cabs did something to the wifi config...
What kind of porblems are you having with the wifi?
nickcerda said:
What kind of porblems are you having with the wifi?
Click to expand...
Click to collapse
It won't turn on.. =)
I thought perhaps it was one of the cingular customization cabs I installed from the original exrom, but now I'm not so sure. I looked at all the cabs and the only one that relates to wifi is the cab that sets the key to enable talking to 802.11g APs.
In comm manager, if I click the wifi icon, it appears to attempt to start wifi, but then goes back to an "x" over the wifi button. The wifi radio doesn't start and the left LED that blinks when wifi is on does not come on.
I wish there were some logs to look at on this thing to see why it's failing to start wifi..
Solved the wifi problem. It appears to be related to something in one of the original 8125 exrom cabs. I reinstalled the new imate rom, skipped the imate exrom install, and only installed a couple cabs from the 8125 exrom. The cabs I installed that did not affect wifi were the mms config, the gprs account config, and the edge icon.
All is now well. If I had the time and patience I'd tear apart the original 8125 cabs to see which one might cause wifi probs, but at this point it's not necessary.
I'll stick with it as-is now until cingular releases their own update...assuming that happens before the hermes is out.. =)
I have a Dopod 838 (identical to 8125, I suppose). The new ROM has worked awesome for me. Better in every way. Even the infamous Activesyn problem went away
I am getting ready to take the plunge...just in case...
does anyone have the original 8125 ROM?
I use SPB backup can restore a backup after I upgrade?
I installed this rom on my 9100, and it is much better than it was with any of the other roms including the original shipped rom!
The radio is much clearer and the wifi hooks up faster and runs better, and I have had absolutely NO lock ups at all.
Later
I am thinking of installing it on an 8125...
Without a backup 'known good' ROM to revert back to I am cautious
summiter said:
Solved the wifi problem. It appears to be related to something in one of the original 8125 exrom cabs. I reinstalled the new imate rom, skipped the imate exrom install, and only installed a couple cabs from the 8125 exrom. The cabs I installed that did not affect wifi were the mms config, the gprs account config, and the edge icon.
All is now well. If I had the time and patience I'd tear apart the original 8125 cabs to see which one might cause wifi probs, but at this point it's not necessary.
I'll stick with it as-is now until cingular releases their own update...assuming that happens before the hermes is out.. =)
Click to expand...
Click to collapse
I added the extROM files one by one to see which one caused the wifi issue and it was Signed-gprsstall_128.sa.cab...so far. It was only the third one in a series of 17. I'll see what happens when I add the rest. This cab file moves a radio.dll file around.
I've installed this ROM on 2 8125's. Much better and faster than Cingular's ROM. The only thing I did was to install the Cingulcustomize_No_Emails.cab, Microsoft Voice and TRE Pocket PC registry editor and remove all traces of the Voice Command. WiFi connects to my secured access point flawlessly (though I never use WiFi) and the AKU2 push email typically has my emails coming in in about 8-10 seconds from my Exchange 2003 server. Very infrequent lockups, much less than any other ROM I've installed.
Just my two cents worth ...
Steven
ROM version: 2.16.9.1 WWE
ROM date: 2/6/06
Radio version: 02.07.10
Protocol version: 413.1.03
ExtROM version: 2.16.9.101
Cingulcustomize_No_Emails.cab
What does that cab do?
nickcerda said:
Cingulcustomize_No_Emails.cab
What does that cab do?
Click to expand...
Click to collapse
the one thing I see is it sets up the GPRS settings for data connection ... you do not need it to make phone calls or use Wifi
Step by step to 2.16
I have a cingular 8125. I'm no stranger to flashing roms, I had a SX66 that was running WM5 and I reloladed it all the time. I'd like to see a step by step guide for unlocking the ext rom, flashing the radio and system roms for the 8125. Anyone know a post with that info in it?
Thanks!
Re: Step by step to 2.16
dmelton75 said:
I have a cingular 8125. I'm no stranger to flashing roms, I had a SX66 that was running WM5 and I reloladed it all the time. I'd like to see a step by step guide for unlocking the ext rom, flashing the radio and system roms for the 8125. Anyone know a post with that info in it?
Thanks!
Click to expand...
Click to collapse
Interesting you say you're no stranger to flashing ROMs but then ask for a step by step.
It's laid out quite well in several topics, but basically:
-Use awizard and enable rapi
-Use awizard and CID unlock
-Use awizard to back up Extrom, radio, splash, os
-Run the executable RUU installer for the imate
-On first boot, as soon as you get prompted to choose a carrier, do a soft reset to prevent the imate ext rom stuff from loading
-Install desired customization items from your backed up cingular ext rom. Any of them can be installed EXCPET the gprsstall cab - it will kill your wifi.
There is currently no way to unlock the ext rom in the lates imate upgrade, so you're stuck with what's in there, but you don't have to let it install.
Over at Howard Forums / T-Mobile MDA/SDA page, chesney09 posted the soon to be release MDA ROM update....
http://www.howardforums.com/showthread.php?t=965690&page=1&pp=15
--------------------------------------------------------------------------------
Hey All..
Many of you played with the 2.24 BETA ROM I had shared a couple months ago...
Well.. in keeping my consistency... Here is the SHIP ROM 2.26. This has the MSFP, Improved radio and bugs fixed.
Hope it helps the hopeless MDA users..
________________________________________________________
i have been waiting.... can't wait much longer
Would be nice if someone could upload it to xda.
I tried getting it up on the ftp but it didn't work.....so i just put it up on my site...
http://www.lvlolvlo.net/?p=32
enjoy...
lvlolvlo said:
I tried getting it up on the ftp but it didn't work.....so i just put it up on my site...
http://www.lvlolvlo.net/?p=32
enjoy...
Click to expand...
Click to collapse
Your page must be getting hits like crazy about now! :lol: Won't even load the page let alone download the file.
oh crap....
i hope'd people who could access rapidshare would use rapidshare....and those who couldn't access rapidshare woul use my link....but i guess that's not the case.....
but so far not too bad...just under 1gb served....file size ~55MB so....
I think a lot of people hate rapidshare. I know I do. I'll put up with it if I need to, but if there's an alternative, screw 'em.
But thanks for the file...I'm gonna check it out later.
dkb218 said:
Over at Howard Forums / T-Mobile MDA/SDA page, chesney09 posted the soon to be release MDA ROM update....
http://www.howardforums.com/showthread.php?t=965690&page=1&pp=15
--------------------------------------------------------------------------------
Hey All..
Many of you played with the 2.24 BETA ROM I had shared a couple months ago...
Well.. in keeping my consistency... Here is the SHIP ROM 2.26. This has the MSFP, Improved radio and bugs fixed.
Hope it helps the hopeless MDA users..
________________________________________________________
Click to expand...
Click to collapse
Unluckily they removed the Intent MIDlet manager but i was able to extract it from the 2.24 and i'll post it as a cab tomorrow morning.
Ok, so like I did the SIM/CID unlock when I loaded up 2.17.
I recall something about the unlocking utility used wouldn't hold once you got past the 2.17 ROM [going from 2.17 to 2.24, etc.]
Is there another unlocking utility I need in order to upgrade to 2.26?
UPDATE:
Did the update...Now restoring back-up...
I uploaded it to the xda-dev ftp:
ftp://xda:[email protected]/Up...Mobile_US_226102_22610105_022511_WWE_Ship.exe
Can anyone confim the version numbers for the IPL/SPL & Radio Rom?
Also can you confirm that it is AKU 2.3?
Thanks
kyphur said:
I uploaded it to the xda-dev ftp:
ftp://xda:[email protected]/Up...Mobile_US_226102_22610105_022511_WWE_Ship.exe
Can anyone confim the version numbers for the IPL/SPL & Radio Rom?
Also can you confirm that it is AKU 2.3?
Thanks
Click to expand...
Click to collapse
I have installed it this evening and it works great so far!
IPL: 2.26
SPL: 2.26
ROM version: 2.26.10.2
ROM date: 6/7/06
Radio Version: 2.25.11
Protocol Version: 4.1.13.12
OS Build version: 14955.2.3.0
kyphur said:
Can anyone confim the version numbers for the IPL/SPL & Radio Rom?
Also can you confirm that it is AKU 2.3?
Thanks
Click to expand...
Click to collapse
IPL 2.26
SPL 2.26
GSM 2.25.11
OS 2.26.10.2
Phone Dial Pad...
This ROM is working great for me. It fixed my one big problem with the 2.24 ROM, which was the phone time never being correct. I have one issue, though...
When I first start the device and it prompts me for the password on my SIM, I get the nice blue phone dialing screen I'm used to (from the 2.24 ROM). But whenever I access the phone after that, I get a far less pretty T-Mobile dial screen (it's in pink and grey...ick). Anyone else have this issue? Any ideas how to fix?
Thanks,
Manzil
I just installed this and I must say that the screens just pop out at me right off the bat without applying any spped registry tweeks, overclocking, etc.
I'm installing my essential Cingular mods tonight and will kick the tires tomorrow.
Sumitter, looking foward to your work on this! (If it passes muster ... )
Re: Phone Dial Pad...
Manzil said:
This ROM is working great for me. It fixed my one big problem with the 2.24 ROM, which was the phone time never being correct. I have one issue, though...
When I first start the device and it prompts me for the password on my SIM, I get the nice blue phone dialing screen I'm used to (from the 2.24 ROM). But whenever I access the phone after that, I get a far less pretty T-Mobile dial screen (it's in pink and grey...ick). Anyone else have this issue? Any ideas how to fix?
Thanks,
Manzil
Click to expand...
Click to collapse
Change to the windows default theme instead of the tmobile theme...I think it's under settings, today...
It does seem to be working quite well for me, also. It's not displaying any of the problems I had with roms after 2.17 and it was reasonably fast even before the usual improvements were added. The T-Zones Today item is kinda worthless, IMO, and the Comm Manager doesn't add a lot but it's at least easier to understand at a glance. All in all, a decent update.
Anybody use O2 miniS?Are there any prolem with symbol(when press blue dot) when you use this ROM.When i use 2.24,the symbol text isn't suit with keyboard!
Re: Phone Dial Pad...
That didn't work. In fact, I did a hard reset of the device, changed theme to Windows default, and everything is blue -- except the phone dial pad which stays with the "T-Mobile look". The funny thing is that when I first turn on the phone radio (not the device itself, but the phone) I am prompted to enter my PIN code for my SIM. This dial pad is the nice blue 3-d dial pad. But every other time I get to the phone dial pad, it's the ugly T-mobile "flat" looking one in pink and grey...
It can't just me be!
Manzil
famewolf said:
Manzil said:
This ROM is working great for me. It fixed my one big problem with the 2.24 ROM, which was the phone time never being correct. I have one issue, though...
When I first start the device and it prompts me for the password on my SIM, I get the nice blue phone dialing screen I'm used to (from the 2.24 ROM). But whenever I access the phone after that, I get a far less pretty T-Mobile dial screen (it's in pink and grey...ick). Anyone else have this issue? Any ideas how to fix?
Thanks,
Manzil
Click to expand...
Click to collapse
Change to the windows default theme instead of the tmobile theme...I think it's under settings, today...
Click to expand...
Click to collapse
To disable dialpad skin (T-Mobile) and use default change HKLM\Security\Phone\Skin\Enabled to 0
zoki said:
To disable dialpad skin (T-Mobile) and use default change HKLM\Security\Phone\Skin\Enabled to 0
Click to expand...
Click to collapse
Thank you! I hate to sound obtuse, but how do I edit the registry...I can't seem to locate any way to do so (no regedit?)
Manzil
Has anyone else noticed their wizards missing calls and txts since updating to WM6? It seems to have the same problem that the AKU3.x ROMS have with missed calls, but not as bad. So far I've noticed that I'll miss a call if the phone has been in standby for a couple of hours. Wake it up and phone calls start coming through again. I'm using 2.47 radio from molski's 2.26 final rom, and had no problems with missed calls before I replaced 2.26 with WM6.
WM6 Crossbow + 2.47.11 Radio (Molski.Biz.AKU2.3)
I have on at least one occasion. So I'm not sure if that was a fluke or a similar problem you face. I've got the same setup though, WM6 (Orwells) with the 2.47.11 radio.
I've also noticed weird things with this ROM such as email notifications that are setup to blink the light on the phone amber with no limit and also ding. Sometimes I checked to see that I did get an email according to the Today Screen plug-in, but it never dinged or flashed the amber light. So I will soft reset it and it then it works fine.
Phone did not show missed calls and voicemail indicator does not show either. I called my voicemail and there were a ton on messages.
G3 Tmobile MDA
WM6
2.47.11 Radio Rom
IT HAS BEEN STATED MANY TIMES! That this is a beta rom. There are lots of bugs and problems with these roms. These are not final roms. They were still in testing when they were leaked. From what i have seen and read some people were recommending going with the 2.19 radio rom. i have the 2.26 radio and it works good enough for me here in southern ca. i have had no problems at all. So try flashing with another radio or just switch back to a more stable rom guys. Good luck
Hi
I had same problem but installed 2.19 radio rom and everything is fine. Therefore I say use 2.19 radio rom, works best with AKU 3.3 rom.
FOR ALL PEOPLE WHO ARE USING WM6 !!!! INSTALL RADIO VERSION 2.19 IT IS THE ONLY VERSION THAT WORKS WITH ANY ROM SO DOWNLAOD AND INSTALL IT !!!!! with other radio roms u get missed calls and other problems so the best way to solve is to install radio ROM version 219 this has been discussed in many topics in Farias and molskis ROMS and in WM6 roms threads.
Are you talking about the file "T-Mobile-UK_2.19.11_Radinly.zip" on the FTP site ?
Because I saw indeed strange things with my phone and after reading this post, I checked and saw that I was using radio 2.47.11
i live in an area with a weak signal. in the 2.19 radio my reception is much worse and i have a larger area in which i get no reception at all.
hello, i have the 2.47.11 and no problems. SMS, GPRS, Bluetooth ... Al works perfekt-
regards Sven
__________________
Windows Mobile 6
IPL: 2.26
SPL: 2.26
GSM: 02.47.11
OS: 10.1.0.811 WWE
VPA compact II - vodafone
1x 1GB miniSD
1x 2GB miniSD
Nokia HS-12W A2DP Headset
sreins said:
hello, i have the 2.47.11 and no problems. SMS, GPRS, Bluetooth ... Al works perfekt-
regards Sven
Click to expand...
Click to collapse
same with me i think it depends were you live. like me 2.19 doesent work for me i would get dropped calls.
Well. I live in a large metro area so coverage is usually excellent. I don't have problems with missed calls when using AKU2.x ROMs. Its just a prob with AKU3.x and WM6 ROMs. When I played with AKU3.x ROMs, changing the radio ROM didn't make much of a difference. Even so, I went ahead and downgraded the radio to 2.19.11 anyway to see if it makes a difference in WM6. Also, the problem only occurs after the phone has been on standby for a couple of hours or more.
WM6 + 2.19.11 Radio ROM
I wonder if it has to do with GSM 850/1900
I wonder if it has to do w/ different ROM's liking different GSM frequencies. Cingular's (I'm sorry 'the New AT&T') network is so mixed up, it uses a combination of all 3 frequencies. At least T-Mobile's frequencies are consistant throughout their network, but their coverage isn't as good.
grinny11 said:
i live in an area with a weak signal. in the 2.19 radio my reception is much worse and i have a larger area in which i get no reception at all.
Click to expand...
Click to collapse
I live in a big city and usually have good coverage. The 2.19.11 radio does have significantly weaker signal reception than the 2.25 or 2.47 radios. Unfortunately I had to make a choice between staying on AKU2.x and using the radio of my choice or going with AKU3.x and sticking with 2.19. Right now I am testing the 2.61 radio and it seems to be working with AKU3.3. I have had 2 calls that went directly to voicemail but I am beginning to think that was just a network fluke and not an issue with the radio. No delayed or missing notifications. All attempts to call my phone are making it to the phone. Testing is still in progress and maybe the issue just hasn't reared its ugly head yet. But I am beginning to be hopeful that I can have my cake (AKU3.3) and eat it too (good radio)
Hello, quick question:
If I have upgraded the radio rom 2.71.11, do I still apply the XDA Cingular Radio Fix2?
Btw, I'm using T-Mobile in the US, if that matters...
ROM:
http://phase.ndnshift.net/xda/radio_2.71.rar
Fix: http://forum.xda-developers.com/attachment.php?attachmentid=63804&d=1199138719
osomphane said:
Hello, quick question:
If I have upgraded the radio rom 2.71.11
Click to expand...
Click to collapse
Where does it come from?
I thought the 2.69 was the newest release
2.71.11 is newest radio rom for kjam.i am using last 3 days.very nice,no miss call or internet problem.very good signal.by the way i am using molski 2.26 wm5 final rom.you can find radio 2.71.11 under the wm6/the boring rom title.good luck
Should I install the fix if I get the new radio?
I'm not usually an early adopter for new roms, but I decided to throw this one on and give it a go. Glad I did. So far, I've seen a very marked improvement for both signal strength as well as the time to recover signal compared to both the 2.19 and 2.69 radio roms. I'm presently using it with the Cingular fix, so I can't comment on whether or not it's needed. Hopefully this continues to work well. The strength is fantastic. Using on Tmobile in nothern New England.
Miss calls on this 2.71.11?
Lets share our experience with the 2.71.11
Phone locks up after about 1 in every 3 calls.
IPL:2.21.0001
SPL:2.21.Olip
Radio:2.27.11 w/XDA Cingular fix 2
Ext Rom: TNT.1933
I have been using Radio 2.71.11 since it was posted and have had not one problem with it. I do get better reception. Battery drain is the same. When I first flashed radio 2.71.11 I added the radio fix cab and it showed no connection and searching, so I uninstalled the cab and all is fine?
just a thought, matbe you have to have IPL/SPL 226 or 308 for the radio to function properly
ipl/spl 308 bluetooth issue
i have an mda vario t-mobile in the uk on pay monthly. since the 308 rom in december, the bluetooth has done weird things. i can now run my motorola stereo headphones on the rom software instead of using the zoki bt cab which fixed the skipping tracks on the previous rom, but now my vario won't talk to my tomtom. an error message saying that it can't find the 'voice gateway' flashes up on the tomtom (one xl), momentarily before the tt tells me it can't find the services on the phone.
hmmm.. is there a way round this apart from sell the phone?
Pumpiron579 said:
I have been using Radio 2.71.11 since it was posted and have had not one problem with it. I do get better reception. Battery drain is the same. When I first flashed radio 2.71.11 I added the radio fix cab and it showed no connection and searching, so I uninstalled the cab and all is fine?
just a thought, matbe you have to have IPL/SPL 226 or 308 for the radio to function properly
Click to expand...
Click to collapse
is it safe to use on a G4?
yes, g4 safe
g0dblissyou said:
Lets share our experience with the 2.71.11
Click to expand...
Click to collapse
Although I am hesitant to attribute it to the radio rom upgrade, since installing the radio rom 2.71.11 on my phone missed calls have shown up as they should and my particular wm6 rom is known to have an issue with missed calls where they show up as "received calls" when gprs is active.
I'm unaware of any other changes which would have corrected this.
I can also state the rom has been performing well for me..I tether heavily and response has been nice...previously I was on the 2.69.11 rom which would occasionally "go off into limbo" and have to be reset on long tethering sessions..so far *looks for wood to knock on..settles on using his own skull* this has not occured on 2.71.11
I will give a try(as sson as my battery charges over 50% ) than I'll report here
flashing now...I'll report back soon...
Hi,
That is a nice version.
How can I install this ROM and do I loose all my settings when installing it?
Many Thanks
Does anyone know if this fixed the 8125's phone and data issue? I am having the issue and would like to know if I need to downgrade to the 2.1* radios or if this will resolve the issue.
And secondly... (OK totally noob here) I still need to CID unlock this phone with hard-SPL? or would it be better to use SoftSPL so I don't void my warranty?
Thanks,
SoBBie
PS the issue I am referring to is post in any places. It is that you will drop a call if your phone tries to connect to the internet.
Data rates went up but missed calls
I have wm6 tnt 1933 series rom date 9/30/07 ipl/spl 2.26
Mspeed test went up to 70kb from 39kb radio rom 2.19.11.
I never received calls and never received vm reminder.
If it matters I have the cingular fix installed.
Anyone have such issues.
Edit
switched back to 2.19.11
upgraded to ipl/spl 3.08
mspeed test went up to 70kb plus
received all calls
upgraded to 2.71.11
lost the E icon only shows G
mspeed test stayed around 70kb and up
No calls coming in
going back to 2.19.11
about: calls
2 day using this radio report:
No missed calls " about time"
Good battery performance
Good signal recovering
4 to 5 bar of signal all the time
signal
The signal is not the best
But i probe the 2.61 and I have always much better signal
ludovik14 said:
I have wm6 tnt 1933 series rom date 9/30/07 ipl/spl 2.26
Mspeed test went up to 70kb from 39kb radio rom 2.19.11.
I never received calls and never received vm reminder.
If it matters I have the cingular fix installed.
Anyone have such issues.
Edit
switched back to 2.19.11
upgraded to ipl/spl 3.08
mspeed test went up to 70kb plus
received all calls
upgraded to 2.71.11
lost the E icon only shows G
mspeed test stayed around 70kb and up
No calls coming in
going back to 2.19.11
Click to expand...
Click to collapse
I use wm6 tnt 1933 and had the same issues. I would have a whole day of missed calls with no voicemail reminder. I have the cingular fix installed but there is still no improvement. I just flashed to 2.71 so I will let you know how this works in a couple of days.
i currently have the 1.54.30.10 , which has a good reception, but sometimes it takes it 2-3 seconds before it dials. anyone here is happy with their radio, and if yes , any links to it? thank you
im using the same radio for T-mobile US and getting better reception than I did with other radios.
Although do find that tis radio is a little slower to pick up the signal, once i has it it picks it up stronger.
I have to agree that this is the best radio for Tmo USA
Agreed on my side too. Best radio even from all the way down under here.
On a side note, just wondering paypalbid, I noticed from one of your posts, you said you had the Maverick Hidelogo installed. Is it any good and where you got it from.
How do I upgrade to this radio? I tried renaming RUU_signed.nbh to CHEEIMG.nbh, and using bootloader method, but after the three colors, it says Loading..., then displays "00068002" at the top center, then back to the three color screen with
Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000
with the word "Serial" at the bottom center.
Should I upgrade the radio before WM6.1?
thanks
Yup thats the method but you should see update succesful once its done. However, you must do a HardSPL 1st anyway in order to use the SD Card method anyway.
It doesnt matter whether you upgrade to WM6.1 1st or the Radio but, there's some talk around that its better to update Radio 1st.
nospoon said:
How do I upgrade to this radio? I tried renaming RUU_signed.nbh to CHEEIMG.nbh, and using bootloader method, but after the three colors, it says Loading..., then displays "00068002" at the top center, then back to the three color screen with
Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000
with the word "Serial" at the bottom center.
Should I upgrade the radio before WM6.1?
thanks
Click to expand...
Click to collapse
Please see below articles.
1. Unlock you SPL, download the attached and JUST do the first step!!!
Cheetah Hard-SPL and SIM Unlocker is now released!
http://forum.xda-developers.com/showthread.php?t=334100
2. Updata you Radio.
Hermes_Extracted Radio Roms
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms