How do I set operator in Xplode ROM 3.5?? - MDA III, XDA III, PDA2k, 9090 Software Upgrading

No longer a problem, and hasn't been answered

please refer to http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted.
I also post the files that u need to set operator (just in case u could not find it).

Error 120
Hi, thanks for that!
I have succesfully changed the operator of xplode's aku 3.5 rom to "Orange UK".
When I now try to run the "BaUpgradeUt", I get error 120: Country ID Error. It says the ROM is not right for my device.
Should I be using "MaUpgradeUt_noID"?
Tom
P.S The only reason I hesitate is that the device shown to the left of the upgrade utility window is not a blue angel. Please confirm that this is correct.

MAUpgradeUT_NOID.exe i a modified magician upgrade file which does not check CID and model id

Related

KJAM ROM on 9100 !!!!

yes this is real.
The KJAM rom, which can be found in the FTP of this site, is working on the Qtek9100 !!!
does anyone have any thoughts about that? is this ROM a better one than the 9100? I think it is!
From what I understand, The KJAM is slower with its rom then the QTEK. Because KJAM is full of apps which might not be needed. Once those apps are removed it should be exactly the same ( are the rom version numbers not the same )
ANyone have any views on this ?
I believe the ROM dates are different, with the K-JAM being 9/16/2005 and the Qtek at 9/22/2005. I don't know the difference between the two, but I'd be interested to find out. Also, I'm still trying to find out how to change the splash screens (HTC, then i-mate) when it boots, but it's different than previous HTC models so far (not splash?.nb).
As for the apps, the difference does lie in the Extended ROM, so once you've custom-tailored that area, they should be identical.
HOWEVER, people on HowardForums are complaining about the Bluetooth in the 9100, where K-JAM users don't seem to be having an issue. I didn't check up further on this, can anyone confirm?
Would yo umind sharing information about details? How to avoid device ID error? IS there hacked exe file? I need to flash my QTEK with IMATE ROM since I think BT performance in IMATE is way better.
TIA
bt on the qtek smells
Grill! Wake up and give us a clue,please!
I did the soft reset after the WM5 setup so that the crap wouldn't install and it works great
so what did you do?
imate rom on a qtek???
i got a vender error when try to install the k-mate rom on my qtek 9100. what´s the trick, that it work without the error? please help!
nice we have to get around that.
Anyone try to place the Wizard in bootloader mode first before running the upgrade utility?
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
pimbo said:
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Click to expand...
Click to collapse
Hi,
I don't think this is the good way because I unpacked the "KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
I don't know which file have to change to "MaUpgradeUt_noID.exe".
Any idea?
THX
TB
Again, if I can find out how the NoID utility bypasses the check by comparing it with the original (does anyone have the exact file before it was hacked?), and we can compare, it'll be a start to look for similar code or text in the EXEs or DLLs of K-JAM's upgrade utility.
Find me the unmodified version of the NoID utility. Look on the FTP, and check all the other Blue Angel ROM update utility's EXE files...
thebiker said:
"KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
Well
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Click to expand...
Click to collapse
Looks to me that somebody who knows howto and has this phone for testing could to edit the The ROMUpdateUtility.exe to bypass the country id errors,
And use as refference maybe the hacked no id loader for the BA.
P.s. the original MA upgrade utility should be found in the original roms from the providers of the Magician devices, we got it from them if i'm right.
Hope it helpes a bit,
I'm no developer, but this file sticks out in my mind..."RUUGetInfo.exe" If that is part of the upgrade installer then it looks to me that it is looking for the actual device ID, and it probably has to fall within a certain range to allow the upgrade to proceed. Something to the effect that each country, language or brand has a range. If your device isn't in that range, you are SOL.
With each generation they do something different, and more difficult.
Dave
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
vbguru613 said:
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
Click to expand...
Click to collapse
Nah, it's Much more involved than that. Just look at the process taken to develop the method to do it on the JAM, PDA2K, and so on. With each generation they make it more difficult.
Dopod 838 > K-Jam rom upgrade.. need some work
I had under my hands the Dopod 838 which is infact the cH version of the WIZARD.
I would like to load the imate K-Jam rom to the Dopod
Playing a bit with the machine, it seems that the Boot loader is actually looks like the Typhoon, the TyphoonNBFTools utility will decode the NK.NBF file but I am not sure what is the Vendor ID of the Dopod.
On top of it after altering the Languge from English to WWE and made the vendor DOPOD, the romupgrade utility reports the new version going to Prodigy and the Lang is English. it seems that although the TyphoonNBFTools was able to decode the NK.NBF, the upgrade application did not take the header information.
I did run also the Boot loader command under the MTTY (on the usb port) and command that did work for the typhoon "R2ds all" responded that I do not have the authority to dump the rom image.
Tried the command password WIZARD and although it did take it, still was not authorized to dump the rom image.
If somebody could help find a method to bypass the protection of rom , upgrade (bypass vendor , Country code...) it would be very helpfull to exchange roms.
:shock:
I've been playing with the ROMUpdateUtility.exe
Well, i've also noticed that the rom is like a typhoon rom.
Ive removed some strings to RUUGetInfo.exe(since this one seems to do the thing), but i cannot test it,
I got error 222, device not responding, (DUH, its a BA :lol
Maybe somebody can replace this file for the original in the folder and try running it. (if it passes the country id and the model no)
But it is a test, use at your own risk.
Do not blame me for anything.

I Need the correct rom for my PDA

Please qhere i can find all the ROMS (all countries) for my Imate Blueangel PDA2k???
Upgrading show me the wrong country selected message, and now my pda dont Start!!!!!
Please HELP ME!!!!!!!!!
My IIs have same problem . I can't upgrade wm5 test2.It show ID counter eror
Upgrade errors
Try going here:
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Upgrade_Errors
I find that using the MaUpgradeUt_noID upgrade application at the bottom of the page to work most of the time.

qtek 9100 w/ ht820. Upgrade, downgrade, do the macarena? WTF

There is quite a bit of info on this site, and for that i am grateful. However, it is soo confusing, I am tempted to just put my sim card back in my Moto Razr.
I have a Qtek 9100 with the following:
MODEL NUMBER WIZA200? (assuming they mean the phone is a wizard)
IPL 2.12.0001
SPL 2.12.0001
ROM 2.17.7.2 WWE
ROM DATE 2-10-06
RADIO VER 02.07.10
PROTOCOL 413.1.03
EXT ROM 2.17.7.102
I am using Dobson Cellular, AKA Cellular One. ( typical GSM, cingular uses cellone towers here )
I have tried so many things and seem to get nowhere. here is the list of things i have tried in the order of attempt.
Resco registry editor to add the tornado A2DP cab addition with an error message.
Tried to update the rom to the "RUU_Prodigy_2080701_101_11310_Qtek_WWE_Test "
and got an error stating " Please update your NBF file" or something along those lines
Then tried to update to the "Cingular_RUU_WIZARD_217_AKU2_WWE_CF2_A2DP-fixed" rom
and recieved the error message " error 300 invalid update tool "
lokiwiz unlock for CID and SIM
with no action on my computer or the 9100 (yes i followed the instructions)
Downgrade to the "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE" rom
with the same " error 300...."
Thats where I stand. At this point, Im at a loss for ideas. I keep searching xda.dev... for more options, but it seems the search brings up the same result everytime no matter my query.
What do I need to do to get my HT820 headphones to work?? There is no stereo headphone option on my bluetooth settings list for the HT820, just headset and handsfree. Windows Media Player plays out of the speakers on the phone itself.
Please do not refer me to other topics as I have seen every reg edit code my brain can handle. I'm not a super lamer, however, im not familiar with manual reg edits.
The first person to fix this ill send $50 via paypal.
Thanks for the help.
AIM "nah2323"
Re: qtek 9100 w/ ht820. Upgrade, downgrade, do the macarena?
nah2323 said:
There is quite a bit of info on this site, and for that i am grateful. However, it is soo confusing, I am tempted to just put my sim card back in my Moto Razr.
I have a Qtek 9100 with the following:
MODEL NUMBER WIZA200? (assuming they mean the phone is a wizard)
IPL 2.12.0001
SPL 2.12.0001
ROM 2.17.7.2 WWE
ROM DATE 2-10-06
RADIO VER 02.07.10
PROTOCOL 413.1.03
EXT ROM 2.17.7.102
I am using Dobson Cellular, AKA Cellular One. ( typical GSM, cingular uses cellone towers here )
I have tried so many things and seem to get nowhere. here is the list of things i have tried in the order of attempt.
Resco registry editor to add the tornado A2DP cab addition with an error message.
Tried to update the rom to the "RUU_Prodigy_2080701_101_11310_Qtek_WWE_Test "
and got an error stating " Please update your NBF file" or something along those lines
Then tried to update to the "Cingular_RUU_WIZARD_217_AKU2_WWE_CF2_A2DP-fixed" rom
and recieved the error message " error 300 invalid update tool "
lokiwiz unlock for CID and SIM
with no action on my computer or the 9100 (yes i followed the instructions)
Downgrade to the "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE" rom
with the same " error 300...."
Thats where I stand. At this point, Im at a loss for ideas. I keep searching xda.dev... for more options, but it seems the search brings up the same result everytime no matter my query.
What do I need to do to get my HT820 headphones to work?? There is no stereo headphone option on my bluetooth settings list for the HT820, just headset and handsfree. Windows Media Player plays out of the speakers on the phone itself.
Please do not refer me to other topics as I have seen every reg edit code my brain can handle. I'm not a super lamer, however, im not familiar with manual reg edits.
The first person to fix this ill send $50 via paypal.
Thanks for the help.
AIM "nah2323"
Click to expand...
Click to collapse
If you just need to get A2DP working, use the A2DP cab file, but you don't install it with a registry editor. You simply copy the cab file over to your device and then click it to execute it. It will install itself.
I'm not familiar with your carrier, and I've not seen any ROMs with customizations specific to them, so you're probably better off sticking with the ROM you have. It is an AKU 2 ROM, which has push (used with an Exchange server) and is certainly better than any 1.X series ROMs.
Just for the sake of completeness, I should clarify that after you copy the cab file over to the device, you use the file manager on the device to locate the file and then click it to execute it on the device.
If it gives you a notice about installing untrusted files, choose to install anyway.
Summiter thanks for the replies.
I thought I would be over looking something.
Where would you like the $50 sent to?
I'd probably pay $50 bucks to NOT see someone do the macarena! Oh the memories ... the pain ...
Steven
nah2323 said:
Summiter thanks for the replies.
I thought I would be over looking something.
Where would you like the $50 sent to?
Click to expand...
Click to collapse
The charity of your choosing of course!

Error when trying to install

Sorry if this question has been answered, but I couldn't find anything on this...
I'm trying to install WM2k5_v4_R3 of the Ivan type upgrade.
I followed the directions and it gave me an error 100: model id error
I have the HTC Blueangel - PH20B1 B1 WWE
Everything that i have read said this upgrade works for this model. Any help would be appreciated.
Thanks,
Alex
did u use the sx66 .bat file or the normal (u need to use the sx 66 one as u have a ph20b1)
Do you know the name of the program? I just used the buu file...
Put your device in bootloader and try again.
Every upgrade works when your phone is in bootloader.

How do I fix my operator on my phone

I had my I-mate PDA2k with WM5_ArtZ_upgrade_WWE 1.7.1.3400_SD_ROM and it would not boot. So I found a fix on the forum using mtty 1.42. Know when I try to change my Rom back or change it to something else I get error 100: model id error 12-N-10-N-N. My operator should be T-Mob101, but when I get the data from the phone it says 0000A0000T%CID?.
Can I fix the opereator on the phone directly or can I get around this some how?
same problem
I have exactly the same problem!!! but mine is SX66 Siemens phone
cobrabite said:
I had my I-mate PDA2k with WM5_ArtZ_upgrade_WWE 1.7.1.3400_SD_ROM and it would not boot. So I found a fix on the forum using mtty 1.42. Know when I try to change my Rom back or change it to something else I get error 100: model id error 12-N-10-N-N. My operator should be T-Mob101, but when I get the data from the phone it says 0000A0000T%CID?.
Can I fix the opereator on the phone directly or can I get around this some how?
Click to expand...
Click to collapse
well i dont know how to fix this operator thing, but u can get around with by using MaUpgradeUt_noID tools.
if you are using helmi_c's rom, it's located under folder PH20B1. so just copy the rom file in there, set the oeprator as your T-Mob101 and flash.
u should also take out the SD card while flashing, just in case.

Categories

Resources