Related
Hi there! I know some ppl already did discuss this on the forums and I tried what ppl have said earlier with paperclips and my pen and even tried loads of headphones playing around! I even broke my pen for trying so hard!
SO basicly for whoever doesnt know its stuck in headset mode and I cant call or receive calls without headphones wich is quite anoying! Im guessing it might be something that broke inside of the jack1.5mm not sure tho dunno how it works!
So Im guessing is there any chance to put it back on normal mode via software? registry ? or something like thaT? or any of you has any idea on a workaround for this? plz give me some ideas since Im out of them! realy dont wanna take the phone to SE to take like 25days and to pay loads of money since I aint got warranty!
Cheers
n0brega
oh forgot to say it started from nowhere I dont put headphones in the phone for like 3months or more! yesterday just took it out of my pocket and it was stuck in headset mode for some reason!
n0brega said:
oh forgot to say it started from nowhere I dont put headphones in the phone for like 3months or more! yesterday just took it out of my pocket and it was stuck in headset mode for some reason!
Click to expand...
Click to collapse
plug your headphone to 3.5mm jack again and unplug it carefully, make a call after doing it, it should work, if it doesn't, try again and this time, unplug it as fast as yu can:d i hope it will help, try it till it work:d, if it doesn't work after 5 times, try to hard reset:d
tried it all more than 50 times lol so Im guessing only a registry tweak or something would make the phone work again properly even if it disables the headset mode im fine with it since I realy dont use headphones....
n0brega said:
tried it all more than 50 times lol so Im guessing only a registry tweak or something would make the phone work again properly even if it disables the headset mode im fine with it since I realy dont use headphones....
Click to expand...
Click to collapse
did you try a hardreset? maybe it will help, when it happen in my old o2 miniS, i plug it several times but it still doesn't work, but 1 day later, it works again:d
This happened to me way back with my i-mate Jam. No idea if it is the same issue, but this is how I solved:
1) Plug the head-phones in.
2) Power off the phone (soft-reset), leaving the head-phones plugged in.
3) Power the phone back on again.
4) When the phone has fully booted to the today screen, remove the head-phones.
As I said, this worked on the i-mate Jam, but no idea if it is the same issue.
n0brega said:
oh forgot to say it started from nowhere I dont put headphones in the phone for like 3months or more! yesterday just took it out of my pocket and it was stuck in headset mode for some reason!
Click to expand...
Click to collapse
have you updated your ROM recently? I noticed this when I updated to Itje's 2.3 or 2.4 version(dont remember correctly). immediately reverted back to 2.2 which is stable and fast. right now.
yeap tried hard reset and even soft-reset with headphones on and turning on back again and then plugging them off
nothing!
doesnt even blink
:F
n0brega said:
yeap tried hard reset and even soft-reset with headphones on and turning on back again and then plugging them off
nothing!
doesnt even blink
:F
Click to expand...
Click to collapse
Same problem here. My phone is inside the pocket most of the time with headset plugged in. And moving around seems to affect the connection after a while. Now I have to plug it in and then while removing it wiggle it a bit around. Contacts are getting stuck most likely. Also when I remove it, it seems to be stuck more secure than it used to.
Any way to fix it yourself?
Try turning off the headset in registry.
HKLM\System\State\Hardware
Set "Headset" to 0.
(P.S. Any reboot of your phone might reset this. If you would like me to make a script to automate it, PM me.)
Angelusz said:
Try turning off the headset in registry.
HKLM\System\State\Hardware
Set "Headset" to 0.
(P.S. Any reboot of your phone might reset this. If you would like me to make a script to automate it, PM me.)
Click to expand...
Click to collapse
Same problem here...
When I do what you suggested, the "headphones connected" status keeps showing and the speakers still dont work...
Guess you're out of luck then. Have to send it back in for repairs.
Had the same problem. Only a repair will help...
When I got it back from the repair center I noticed that the headphone jack is now totally different.
- The heavy resistance is gone, the headphones just go in like butter now.
- There is a little click at the end.
I hope it won't break this time.
How much did you pay for the repairs? How long did it take?
well try this, (it worked for me)
1. install the SRS plugin found here (http://forum.xda-developers.com/showthread.php?t=473780)
2. soft reset the phone 2 times
And tada no more stuck in headset mode!
hope it works for you
wolver1ne said:
How much did you pay for the repairs? How long did it take?
Click to expand...
Click to collapse
It took about 3 weeks but it was right before Christmas. So I think it normally takes about 2 weeks to repair.
My Problem Resolved .....
Sry, it was duplicated somehow.... see the 2nd post by me below.
My Problem Resolved .....
My Problem Resolved............... but how ?
Very very simple, I just put the headphone in and did ;
1- A soft reset, but it didn't work.( How to Soft and Hard Reset )
2- A Hard reset (with the headphone still pluged in), when the today screen loaded fully, I pluged out the headphone and it WORKED !!!!!!!!!!! .
If it works for you people please let me know, because as you can see I just
joind this forum to tell you all how it was fixed for me.
For Atom life
pls translate
Lo que hice fue, hacer un Hard Reset con el head set puesto.
Mientras hacia el hard reset, conecte y desconecte el hed set unas 15 veces, luego cuando estaba en el la pantalla de today fue la ultima ves que lo desconecte.
aprete la tecla send, y hice una llamada, y Funciono. ya no necesitaba el head set,
Suerte.!
From Honduras
QE_LiTHiUm said:
My Problem Resolved............... but how ?
Very very simple, I just put the headphone in and did ;
1- A soft reset, but it didn't work.( How to Soft and Hard Reset )
2- A Hard reset (with the headphone still pluged in), when the today screen loaded fully, I pluged out the headphone and it WORKED !!!!!!!!!!! .
If it works for you people please let me know, because as you can see I just
joind this forum to tell you all how it was fixed for me.
Click to expand...
Click to collapse
I have tried this and all the tips above but it did not work. Few days ago I could resolve the problem by knocking around the headset connector. But now the problem seems no way out. I think it is a hardware problem.
Please help...
Hello all!!!
I'm having some issues with my Kaiser and I don't know if a Hard reset will solve them. Also I'm trying to avoid doing this since I would have to re install all my soft, which is something I really wouldn't like to do...
The issue
When the Kaiser is soft reseted it starts "normally" it shows the "Vodafone" spash screen and the when Windows Mobile 6 logo appear the back light of the screen turns off (but the screen still works)... After this Pin is entered (every thing fine untill here) but when the SO finishes loading the back light is still off, so I press the On (standby) button and the back light turns on, I press the On button again to and the screen turns off... and that's it, I have to re-reset it because it never comes back from Stand by mode... If I call my self the phone starts vibrating for ever!
If I execute any program (before freezing the device) this app never finishes loading and cannot be closed (for example TOMTOM).
Still... If I soft reset it while plugged to my computer or any charger then the device loads and works perfectly.... What the f is going on??
Any suggestions or comment will be much appreciated!!, I think my Kaiser still has to live a few months more (it's been only 1 year since I got it).
Thanks to all!!!!
Mmmmm... not to many answers, I guess I'll just have to hard reset...
Either way.. thanks!
Have you tried to replace the battery?, sounds weird, but maybe is a battery failure.
Por cierto, soy de México y te diré que si sigues con WM6, mejor cambia a WM6.1 o a las nuevas ROMS de WM6.5 aquí en el foro. Hay excelentes tutoriales para ello, quizá la falla también es de soft, ¿has tratado de reflashear con tu versión de WM?, igual y dá pereza reinstalar todo, pero es un precio pequeño por tener a tu Kaiser vivito y coleando.
Saludos !
Sorry for the language switch, , but since you are Spanish . . .
Regards.
Thanks a lot...
Soy Argentino afincado en España, mi primo vive en Monterrey...
Bueno... I never thought of flashing the device (I did with my previous phone a Hermes), here in Spain sometimes when you flash the device then the network does not recognise your phone anymore for certain services... Still I imagine that the new Wm 6.1 and 6.5 are far better than the Vodafone crap I have in my Tytn...
Thanks for that, I'll try hard resetting if nothing happens my tytn will get a new rom...!
I sincerely encourage you to flash a new ROM in your kaiser, there are other forums where the chefs release ROM especifically for spain providers, maybe you can look for one of them, and if not, in those sites they have cabs with settings for data connections of any provider.
I hope this will not be considered as spam, look for htcmania or todopdas, those are spanish forums, but you can find most of their ROMS are based on xda-Developers ROMS.
Saludos desde México !!
i second the thought about a power failure.
i had this issue on a siemens phone. it sounds like the battery i damaged and unable to deliver enough power to your phone.
maybe you should try to geht this little tool to work and compare the examples to yours.
http://forum.xda-developers.com/showthread.php?p=3427512
A terminal issue ;-)
soponcio_virtual said:
Still... If I soft reset it while plugged to my computer or any charger then the device loads and works perfectly....
Click to expand...
Click to collapse
This implies there may be an issue with power coming from the battery so aside from a possibly faulty battery as already mentioned, you may want to check the little gold terminal pads on the battery are cleaned with a cotton bud dipped in some contact cleaner or IPA, also the spring terminals that make contact with the battery.
I once had a problem with my battery failing to charge and this fixed it. I have cleaned the terminals every couple of months this way since and have had no further problems. Be careful not to spray the contact cleaner directly onto the battery or spring terminals - you don't want to get any fluids where they shouldn't be, especially with moisture indicator stickers that will void your warranty if triggered.
First Sorry for my English… I’m from Argentina.
I had this diamond for a week, working perfectly.
Suddenly the digitizer started to think I’m pressing a button, but not I haven’t, Tried a hard reset, got stuck a little in the alignment screen, trying to touch the crosses in different places I got pass the screen…
Now is working not so good, in the center of the screen it is perfectly centered but when I move the stylus Up or down it start to misalign and Can’t use the start menu or the function buttons at de bottom of the screen.
This is really frustrating…
Can someone help me?
Tnks.
hi my friend,
you should try to hard reset again an see if is working, there is an accidet or somethint that you think could broke que digitalizar o some thing like that?
you can also can try the note pad to si if there is an specific area where the digitalizar is not working.
i know that there is a way to skip the aligment process but i never used it
Amigo intenta hacerle un hard reset de nuevo, si nada prueba con el note pad para ver cuales son las areas en donde se te esta presentando el problema, se que hay una manera de saltarse el alineamiento de la pantalla por software pero nunca lo he utilizado,
verifica que no hays tenido golpes porque eso puede afectar el digitalizador
suerte
Thanks for your answer.
I´ve tried another hard reset erasing the movinand with the same results
Now I´m stuck in the alignment screen
Any ideas.
Thanks again.
Gracias amigo por tu respuesta.
He probado otro hard reset con similares resultados.
Saludos
I had the same problem!
I left the battery out for a day and it eventually let me align the screen again.
It did not last long though i had to get a replacement from orange, but the nice lady did it for free
Good luck!
i got it repaired by htc...
they replaced the LCD with the new one...they said the digitizer was broken
The problem and the "solution"
Found the problem…
When I was cleaning the screen I was able to see a spot in the lower left corner of the digitizer, a small bubble inside the digitizer, I guess this bubble came from the windex I used to clean the screen… Don´t use Windex or something similar…
And I found a solution…
Manually modify the values in HKLM\HARDWARE\DEVICEMAP\TOUCH\CalibrationData
The bubble made a deformation in the digitizer so I have to compensate by changing the calibration data…
My new values
479,503 700,175 700,700 179,812 185,175
As you can see with these values my new screen isn´t rectangular any more, now it looks like a Trapezoid…
I will have to change the digitizer, for now I will keep using it as is.
Thank for all the answers
Best regards
Petete.
combat cyber said:
i got it repaired by htc...
they replaced the LCD with the new one...they said the digitizer was broken
Click to expand...
Click to collapse
And now, how are you satisfied?
petete said:
Found the problem…
When I was cleaning the screen I was able to see a spot in the lower left corner of the digitizer, a small bubble inside the digitizer, I guess this bubble came from the windex I used to clean the screen… Don´t use Windex or something similar…
And I found a solution…
Manually modify the values in HKLM\HARDWARE\DEVICEMAP\TOUCH\CalibrationData
The bubble made a deformation in the digitizer so I have to compensate by changing the calibration data…
My new values
479,503 700,175 700,700 179,812 185,175
As you can see with these values my new screen isn´t rectangular any more, now it looks like a Trapezoid…
I will have to change the digitizer, for now I will keep using it as is.
Thank for all the answers
Best regards
Petete.
Click to expand...
Click to collapse
Where did you find idea to use exactly these numbers
479,503 700,175 700,700 179,812 185,175
and what's windex ? Do you have warranty anymore?
Did you install igo8 or some another gps software and did you use them before came problems with touch screen?
Tnx
greetz
Dear Brothers............Please help me or i may lost my X1i.
Yesterday night i put android latest kernal its was working awesome i also downloads some apps from market place and its was working great. after finishing my work i go to bed and leave my phone with android running. in morning when i got up and tried to turn my phone on but i could'nt. i thought might the battery charge lost. then i put the charger on then what happened...........the power button on the top became RED. After that the phone went directly into bootloader screen. After bootloader it found OS (Thats Energy One - i flashed by Micro-sd method). but the screen is flippering and the phone turn off automatically and restart from power button with RED. this cycle is continue..........Now i dont know what should i consider it.......i lost my X1i or some thing else???
Well, i'm not the master here, but maybe u should try TASK29 to flash again your X1, with another ROM, dont worry to much just believe that your X1 will come back to life, hehehe
As far as I know, if X1's Battery is 0 (Zero) it will appear red light below the power button. The red light will disapear as the power is enough. It is also occured if the one of battery cell is failure. Since you can turn on the X1, I think it's not hardware issue.
Do you install dua-GenY for switching Android - WinMo, If yes, probably it's the isssue, I have that problem before. All I did was take out the SD Card.
Russell.Eclair said:
As far as I know, if X1's Battery is 0 (Zero) it will appear red light below the power button. The red light will disapear as the power is enough. It is also occured if the one of battery cell is failure. Since you can turn on the X1, I think it's not hardware issue.
Do you install dua-GenY for switching Android - WinMo, If yes, probably it's the isssue, I have that problem before. All I did was take out the SD Card.
Click to expand...
Click to collapse
Wah ada master orang medan, hoho, Mirip ma hape SE yang laen
Yes, just like another Sony Ericsson Phone, it will show the red light when the power of battery goes down to 0% level, may be you can try @Russel method
Or charging on and Power On X1 (Sometimes worked)
dna_voluntatis said:
Wah ada master orang medan, hoho, Mirip ma hape SE yang laen
Yes, just like another Sony Ericsson Phone, it will show the red light when the power of battery goes down to 0% level, may be you can try @Russel method
Or charging on and Power On X1 (Sometimes worked)
Click to expand...
Click to collapse
Hahaha. I'm not master. Kaget saya baru perhatiin ternyata orang Indonesia juga toh. Salam kenal, bro!
Russell.Eclair said:
Hahaha. I'm not master. Kaget saya baru perhatiin ternyata orang Indonesia juga toh. Salam kenal, bro!
Click to expand...
Click to collapse
Hohoho, salam kenal juga (Pke ROM yg mana Bro?? Ada Master Willi juga disini)
I have this problem but in another Sony Ericsson Phone
Willi's real Master. Thumbs up 4 him. Sejak dia ngembangin ROM dgn Sense, saya ganti ke Jerpelea's. Soalnya saya kurang suka ada merek lain di X1.
About the red button light, found it: http://forum.xda-developers.com/showthread.php?t=452402
and
http://www.xperiax1.net/x1-problems-issues/2951-charging-red-light-power-button-issue.html
Is it applied to other SE case? not so sure, since X1 is not manufactured by HTC. (Perhaps)
Thanks God!
My battery was completely out of charge. When i connect the charger while the battery was in the phone then it was'nt charging. For that i bought a desktop charger and charge the battery externally with that one for half an hour and put it back into the phone. And i was lucky by pressing the power button and phone vibrate.
Hi everyone,
I've discovered one big problem with the top of the touchscreen, that not respond and the notification bar not scroll down. I also use one touch verify app and the problem is verified by that.
Someone have or had the same problem and fixed this?
I've the firmware build MAZE_ALPHA_B_V09_20180307.
Sorry for my bad english, I'm Italian
Thanks for any response.
Have you reset the phone to see if that helped? Before you try that, please, save your important information because you will lost them during the process.
Sometime the screen protector used for the phone can cause slow response if not properly placed on the surface( which, I have noticed in mine and I have to remove it for quick response).
Hi. I havw the same prob. Reset take no results! After 10 times reset Stil same prob.
Some problem
Hi, i have the some problem. Any solutions? Is it an hardware problem? it is possible to fix it?
Risolto Solved
Francesco.capro said:
Hi everyone,
I've discovered one big problem with the top of the touchscreen, that not respond and the notification bar not scroll down. I also use one touch verify app and the problem is verified by that.
Someone have or had the same problem and fixed this?
I've the firmware build MAZE_ALPHA_B_V09_20180307.
Sorry for my bad english, I'm Italian
Thanks for any response.
Click to expand...
Click to collapse
Ciao Io avevo lo stesso problema Ho risolto "strizzando" in un verso e nell'altro il telefono prendendolo dalle estremità. In maniera gentile per evitare di rompere l'lcd ma decisa. Come se strizzassi un asciugamano.