Hi, I need help from some of the pros here. I don't know what did I do wrong, but suddenly in the messaging section of my Wizard, the subfolder Text Messages cannot be expanded to its subsections, and when I click the Text Messages folder, folder called "IPM.Root" appears instead of "inbox" with no messages inside....
The strange thing is that when I receive new SMS and I click on the "new message" notification on today screen, I can get normally to "Inbox" and can see all my stored messages. However, when I close messaging, and want to access my Inbox later again (without receiving any new message in the meantime), I get again only the "IPM.Root" option.
Any idea how to repair this section of messaging application?
Thank you for your help.
O.
do you have live messenger installed on there by any chance?
i had the same problem and had to hard-reset my device and reinstall my programs settings etc rather than loading from a backup to fix it.
agentp said:
do you have live messenger installed on there by any chance?
i had the same problem and had to hard-reset my device and reinstall my programs settings etc rather than loading from a backup to fix it.
Click to expand...
Click to collapse
Thank you for your answer. Yes, I am afraid hard reset (without installing backup) is the last solution, I just hoped that there will a less painfull solution.
* Sync your Device
* Export your SMS with Jeyo Mobile Companion
* Make a backup of your Vario with Sprite Backup/SPB backup, exclude the mail option.
* Hard reset
* Restore your Backup
* Sync your device
* Import your SMS with Jeyo Mobile Companion
I believe that's the only way with WM5
eelco_akker said:
* Sync your Device
* Export your SMS with Jeyo Mobile Companion
* Make a backup of your Vario with Sprite Backup/SPB backup, exclude the mail option.
* Hard reset
* Restore your Backup
* Sync your device
* Import your SMS with Jeyo Mobile Companion
I believe that's the only way with WM5
Click to expand...
Click to collapse
I wouldnt back up my SMS I have tried something simalier before and It came right back. I think it is in the system settings. I would just save your pim and reflash. IMHO
my method does work, did it last thursday, no problems anymore after that.
eelco
Thank you guys for your help. It's solved now, I have used the option without backing up messages, as the stored SMS were not so important and emails could be downloaded again after the repair.
Thank you, regards
O.
Related
Is there anyway at all to backup text message, upgrade your phone and then put them back onto the device when it's updated? I've had a look through a lot of the files but can't seem to find any text messages, just email messages
I have found Jeyo Mobile Extender for Outlook. However, when I start Outlook 2003 it comes up saying the Add-in has fired an error. I think this is because I run Win Vista though.
If Jeyo really is the only/best way to do it, I'll probably just bung in an old HDD, install XP FLP on it and do everything on there inc. the upgrade, unless there is another way?
http://forum.xda-developers.com/viewtopic.php?t=59169&highlight= have a look there. Sorry I can't help more.
i'd like to ask, is it safe to assume that these messages are all under windows>messaging, and that we can copy these files to our computer through activesync, and put them back after the upgrade?
will our BA be able to read them as text messages?
Thats the location of the email files yes. I'm not sure if just replacing them will work though, that why I'm probably going for the Jeyo software (and it also does SMS which I what I need).
For me, I use Jeyo Mobile Companion 1.1 for backup my call history & sms. (the stand alone version Not the outlook plug-in, cos in my device the plug-in version is not stable)
backup:
Export >> All (or selection)
restore:
Import >> All (or selection)
Hey guys after having one of Duty's origional roms since september i took a chance on : L26_WM6.1_PROV4_(3.51.502.0_WWE)_Multimedia which moved me from 6.0 to 6.1 win mobile. I flashed. Everything is great. I used Sprite backup. The only thing is i see all my contacts in contacts (when i click the contacts on HTC Home) but none of them come up when someone is dialing.
I reladed contacts only from Sprite and stilll.. see all contacts.. nothing is showing up on incoming? Do i need to move them/wipe them out or something? Is there a difference between windows mobile 6.0 contact management and 6.1 ? So far i only that on 6.1 when i add to contact it asks me whether i want to save to Sim or Outlook. I choose outlook since in origional rom i had it all saved to Phone not SIM .
Any ideas why my incoming calls dont display the contact? Let me know if u need additional data.
Thanks guys
This community is the best.
anyone on this? anyway i can reload the contactS?
I think I read somewhere that Sprite doesn't work to move stuff from 6.0 to 6.1. But I don' know that as a fact.
Maybe you could try syncing them to Outlook. Export your address book to a CSV so you have a back up. Then Delete your Contact from the Device. Then Resync them.
If you don't want to have your Contacts on the Outlook then Use PimBackup to Back up your contacts only. Delete them from your outlook, which will delete them from your device during Sync. (Remove the Outlook Sync Part. Then Restore the PimBackup.
I used PPCPimBackup to migrate. I have never had this problem even when migrating from a Dash to the Tilt (and many ROMs after that)
Hi Guys,
You can restore Contacts, Appointments, Tasks, My Documents, Internet Favs using the latest release of Sprite Backup - 6.2.2 - after a ROM upgrade. You can also use the Merge Restore to attempt a restore of all the other data.
Cheers,
Kevin
Sprite Software
kevNZ said:
Hi Guys,
You can restore Contacts, Appointments, Tasks, My Documents, Internet Favs using the latest release of Sprite Backup - 6.2.2 - after a ROM upgrade. You can also use the Merge Restore to attempt a restore of all the other data.
Cheers,
Kevin
Sprite Software
Click to expand...
Click to collapse
There's an official answer If I ever saw one.
i have the same problem, i have Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[CubeV2] with hard SPL-3.28 on my tilt and the #s dont show up when someone is calling me even when i have them in my contact list. however they do show up afterwards in my history.
Rodri3000 said:
i have the same problem, i have Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[CubeV2] with hard SPL-3.28 on my tilt and the #s dont show up when someone is calling me even when i have them in my contact list. however they do show up afterwards in my history.
Click to expand...
Click to collapse
Same problem here.
Running:
-Ruu_Signed_Duttys_WM6.1_Official_5.2.19209_1_58_16_27__FIX
-JumpSPL1.56/hard SPL V1
Can't for the life of me figure a fix for this one. Seems like it would be pretty simple...but no such luck. Help would be appreciated!
-e
I backed up with sprite backup using the stock at&t rom, then flashed to l26s new rom and now sprite backup only reloads some of my settings and my damn contacts are gone. Is there a way to manually extract the contacts out of the sB backup file also why does activesync think that i dont have outlook installed The damn window is open right beside it and it still says install outlook any help would be appreciated thanks ahead of time
did you check out the MIGRATION settings in the backup menu under options? you can choose to migrate your settings to another device (it migrates call logs, contacts, calender, tasks and categories...better yet for contacts to never fail and to always be updated is to use an exchange server for your pocket outlook email (i use a free one called mail2web i dont know what id do without it, push email is far superb over pop3)
well that would have worked before i backed up but doesnt help much now. thank u . i dont use email on my phone i just lost a lot of phone numbers. I just need to find a way to get to the phone numbers again. syncing with outloo didnt work because it says outlook isnt installed
Hi hi,
I flash ROMs quite often, and always having problem with duplicate contact & calendar entries when syncing with my work laptop after each ROM upgrade.
My workaround is to manually delete those duplicate entries, I know there are some program out there to easily clean duplicates.
My question is that, what is the proper way of syncing to prevent duplicate entries from happening in the first place? eg. making sure device name is the same, don't restore from PIM backup, etc.
This what I usually do.
1. ROM upgrade
2. Restore from PIM backup
3. Delete mobile device from my ActiveSync
4. Connect Kaiser to Laptop
5. Setup new sync connection
6. Sync
Is the step above incorrect?
Extra info:
- I connect my Kaiser to two laptops
- 1st laptop is home laptop - nothing is synced, only used for Internet connection & charging kaiser
- 2nd laptop is work laptop - syncing calendar, contacts, & mail
Thanks in advance
viluve said:
Hi hi,
I flash ROMs quite often, and always having problem with duplicate contact & calendar entries when syncing with my work laptop after each ROM upgrade.
My workaround is to manually delete those duplicate entries, I know there are some program out there to easily clean duplicates.
My question is that, what is the proper way of syncing to prevent duplicate entries from happening in the first place? eg. making sure device name is the same, don't restore from PIM backup, etc.
This what I usually do.
1. ROM upgrade
2. Restore from PIM backup
3. Delete mobile device from my ActiveSync
4. Connect Kaiser to Laptop
5. Setup new sync connection
6. Sync
Is the step above incorrect?
Thanks in advance
Click to expand...
Click to collapse
What things u want to have saved(contacts, tasks,...). If u want to have saved just contacts, tasks and appointments, u dont need to use pim backup. Just sync your phone after the rom upgrade with a pc.
These are my usual steps:
1. sync phone with pc(contacts, tasks, appointments)
2. pim backaup my call logs,sms,mms
3. rom upgrade
4. setup new sync partnership(without deleting the old one) and sync
5. restore the settings via pim backup
EDIT: or u can use sktools for deleting the duplicate contacts, ...
That happens when you restore contacts, appointments etc..from PIM backup and choose the "Combine the items on my device with the items on this computer" option when you setup the new partnership.
Solution: Restore SMS's from PIM and let M$ Outlook take care of the contacts and calendar entries bit...
Beaten by Mikulec ...
ah.. ic.. so the trick is only restore sms, call logs, etc from PIM. Do not restore calendar & contacts.
I was considering that, but I was just afraid that.. if I don't restore calendar & contacts, the next time I sync, it will wipe out all my calendar & contacts in my work laptop (ie. laptop mirrors what's in kaiser).
Is there anything that I need to be aware of, to ensure that after first sync all my calendar & contacts won't be cleared because my kaiser has no calendar entries in it?
Thanks for your help, hopefully this 'll help others with similar prob.
viluve said:
ah.. ic.. so the trick is only restore sms, call logs, etc from PIM. Do not restore calendar & contacts.
I was considering that, but I was just afraid that.. if I don't restore calendar & contacts, the next time I sync, it will wipe out all my calendar & contacts in my work laptop (ie. laptop mirrors what's in kaiser).
Is there anything that I need to be aware of, to ensure that after first sync all my calendar & contacts won't be cleared because my kaiser has no calendar entries in it?
Thanks for your help, hopefully this 'll help others with similar prob.
Click to expand...
Click to collapse
U can try to backup also your contacts and appointments with pim backup, but use the steps that I wrote(restore only call logs, sms... via backup). In case the sync goes wrong and it will not restore your contacts,... u can use pim backup to restore them.
Hi,
I am using Jeyo Mobile Extender http://www.jeyo.com/extender.asp to write SMS with my Diamond if I am working with my PC.
The Diamond is connected with Activ Sync via Bluetooth. Everything works good, the only Problem is if I get a new SMS it is not automatically synchronized with Outlook. I have to press the "Sent/Recive" Button everytime. Than all new SMS are synchronized with outlook without any problem.
If I am writing a SMS with outlook there i no problem the sms is automatically sent to the pda.
Is there any possibility to acitivate the automaticall synchronization if I get a new SMS?
Thanks for your help guys...
If you go to the Options menu for Jeyo ME, there should be something called 'Send/Receive SMS messages on connecting'. That should do it.
sh500 said:
If you go to the Options menu for Jeyo ME, there should be something called 'Send/Receive SMS messages on connecting'. That should do it.
Click to expand...
Click to collapse
'Send/Receive SMS messages on connecting'
it is not working.
thank you for someone help first!!!!
If that didn't work then some people have reported to edit the file JeyoSMSReceive.ini found in C:\Program Files\Jeyo\JME_WM. Sometimes the dates in this files can be wrong:
These are the contents of mine one:
Inbox=2009-02-12 20:40:40.000
"Sent Items"=2009-02-12 14:16:53.000
Drafts=2008-02-13 19:09:32.687
As my software is working 'correctly' the dates are all current. Check your file and see what the dates are. I believe changes the dates manually to a more recent date can resolve such issue. Sorry but I can't remember the exact procedure.
Failing this, you could just trying to uninstalling the program and in doing so also remove the C:\Program Files\Jeyo folder, restart the PC and then reinstall.
Had the same problem while running the trial... So I went to Jeyo Mobile Companion Instead, same features and tons more, but not integrated to outlook...
IMO, better than JME