Related
Hi , k-jam was established After
I loaded MrClean_RUU_WIZARD_2240001a_AKU23_WWE room at website.it was resetted after I loaded the applications .İt hasn’t opened .
Now it isn’t entering boot mode and isn’t opened.
Some forums I look for it So 10-15 persons have this room problem and it was connection cagresi jtag for the instrument will enter boot mode
help mee
Can you get into the boot loader by soft resetting the phone (inserting stylus into small hole on side of phone and at the same time holding down the camera button?)
If you can get into the boot loader that way - connect to your PC and rerun the rom update utility
i know these but the phone is not entering boot mode and i dont know how to enter the phone in boot mode, i must learn the jtag connecting points over the main board , anybody help me who know these points? :?:
help me all people
If it's completly bricked, you must send it to service. There's nothing else to do.
your bootloader sector erased probably,i have same problem...i try jtag method for this,but i need bootloader.bin file for k-jam.if i successfully repair my phone,i write here revive method...
ANYONE HAVE BOOTLOADER BIN FILE FOR K-JAM (QTEK 9100)??????
murat1369
hello murat1369
i have the same problem in here...
i will do anything to revive my wizard.
please give me the location of the test points and i will get the bin file in anyway.
i was working on my wizard and i gave up finding the test points. here's my thread:
http://forum.xda-developers.com/viewtopic.php?t=59992
if you want add me on msn or mail me the test points and we'll put together step by step tutorial to revive our bricks.
[email protected]
Hi to all,
My device is stuck on bootscreen:
- Serial v2. 08 (outside of cradle)
- USB v2. 08 (inside cradle)
I' ve tried the solution:
-use Mitty, when stuck on bootscreen
(http://forum.xda-developers.com/showpost.php?p=934239&postcount=12)
but without success.
I See again:
- Serial v2. 08 (outside of cradle)
- USB v2. 08 (inside cradle)
Before of this I've used:
-xdadev_all_unlock-v1.5 (with success);
-after I've copied EnterBL.exe to my device and execute it for stupid purpose only
and now my device stuck as mentioned before.
I cannot connect it through ActiveSync 4.2 and simply stuck
I've read a lot of thing and suggestion on this forum and I've tried various solution but the device stuck and I'm too.
I'm a newbie and really I don't know if this is a bl mode or something else.
Someone can help me Please?
Thanks
My device:
Vodafone VPX v1620
Model PH2OB2
Language:UK
Have you tried a soft reset?
you just need to find a different ROM and flash it using the file i attached. you are also going to have the change the htcruu files to ruu files. all u have to do is a simple renaming. try that and ur phone should be back to normal again soon.
Take care to mtty version 1.16 rather than 1.42
Hi and thanks to all,
the problem was the version of mtty.
the version 1.16 works fine
the 1,42 doesent
so now I've done the step
please look the attached image
and now my device work again
but without radio
on the screen on boot I read:
NO GSM
D 1.40 ETC ETC
mtty 1.16 link for download
I don't know if I can however I post the link for all that need the newer version of mtty
http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=file,40,file=186
HAVE A LOT OF FUN!
Stuck on bootscreen (Serial v2.06/USB v2.06)
Hi All,
thanks a lot for the great help,
I Have I-mate PDA2k with WM2003SE
I have ROM ver. 1.40.00
I tried to reflash my PDA2k as I found that the sound is no longer work as well as the SD card is no longer been recognized by the OS
Now I am stuck on bootloader (Serial v2.06/USB v2.06) screen after unsuccessful flashing my PDA due to power failure in my home electricity
I used MTTY V1.42, set 14 0, task 28 and task 0 commands and successfully the OS worked again, then I found new ROMs for WM2005, So I used XDAIII Ext. ROM unlock tool, after that the machine started to HANG so I made a Hard reset then it return to hang on BOOT splash screen again
so I used mtty again to reprepare the Disk On Chip to return to a clean OS
all above three commands executed successfully and after soft reset the PDA2k stuck in the boot screen, I tried hard reset as well but with no hope
I tried to use MaUpgradeUt_noID.exe to reflash the Rom nothing happen, I tried to use another official roms from I-mate but nothing happen I stuck in the bad bootloader screen, I tried to use d2s command to make a backup of my ROM but when the command is executed the USB v2.06 message disappers from screen
after all this, is there anyone can help me with a new idea on how to fix it.
Thanks alot on advance.
hi
I have the same problem, could you help me?
secur said:
Hi to all,
My device is stuck on bootscreen:
- Serial v2. 08 (outside of cradle)
- USB v2. 08 (inside cradle)
I' ve tried the solution:
-use Mitty, when stuck on bootscreen
(http://forum.xda-developers.com/showpost.php?p=934239&postcount=12)
but without success.
I See again:
- Serial v2. 08 (outside of cradle)
- USB v2. 08 (inside cradle)
Before of this I've used:
-xdadev_all_unlock-v1.5 (with success);
-after I've copied EnterBL.exe to my device and execute it for stupid purpose only
and now my device stuck as mentioned before.
I cannot connect it through ActiveSync 4.2 and simply stuck
I've read a lot of thing and suggestion on this forum and I've tried various solution but the device stuck and I'm too.
I'm a newbie and really I don't know if this is a bl mode or something else.
Someone can help me Please?
Thanks
My device:
Vodafone VPX v1620
Model PH2OB2
Language:UK
Click to expand...
Click to collapse
secur said:
I've read a lot of thing and suggestion on this forum and I've tried various solution but the device stuck and I'm too.
I'm a newbie and really I don't know if this is a bl mode or something else.
Someone can help me Please?
Thanks
My device:
Vodafone VPX v1620
Model PH2OB2
Language:UK
Click to expand...
Click to collapse
OK i know you are new.. and maybe, just maybe a bit nervous because you have a device you cant use..
READ THE DAMN WIKI ALREADY!
There are so many ways to upgrade a rom, or extract it,
Let me give you a little hint.. Use that really bright shiny search button up there.. (ok so its not bright and shiny, but it is there!)
Press the down arrow, choose advanced search,
then type in what you need help with,
then make sure that the forum is BlueAngel (on the right!)
then hit search...
That will bring all the posts with the words that you looked for in the BlueAngle section of the forum.
Multiple posting is stoopid.. This is the 6th post i have seen from you regarding your device that you could have solved using your own head, and searching for the answer istead of sitting on your backside waiting for someone to post the link to solve all your problems.
I know this sounds harsh, and scarcastic, and a tad evil... EVERYTHING I HAVE LEARNED ABOUT A HTC DEVICE, I HAVE LEARNED FROM THIS SITE,
and reading the wiki, and google, and all kinds of other services...
there is no shame in asking for help.. just exhaust all other options first!
@ jbodaa
please read above and take note as well!
1. Download Romupdate v1.11a
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run Romupdate v1.11a (from downloaded)
5. from left top corner drop down menu Port: Choose WCEUSBSH001 (If you only see COM 1 and COM1 try unplugging the USB and replugging it)
6. press OK button
7. type "set 14 0" without the quotes in blank window that showed up to tell bootloader to boot the OS after reset.
8.press enter to execute
9. on next line you will see:
HTCST ÚÈÒHTCEUSB>
10.type "task 28" (no quotes) right after > sign to get your device formatted
11.press enter to execute, you gonna see:
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
12. type "task 0" (no quotes) right atfter > sign to ask your device reboot
13.press enter to execute the command
14. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
stuck on bootscreen USB v2. 07
hi 2 all.i i have i-mate_PDA2k ppc.
i downloaded i-mate_PDA2k_Arabic_13100_112_10600_SHIP to my pc and clicked on it and got stuck on boot screen USB v2. 07.i tried soft reset & hard reset i tried Romupdate v1.11a and mtty1.42 i tried every thing i would whan to bring it back to factory setting can some one help me.thanx a million thanx in advance
----------------------------------------------------------------------------
Learn 2 live & live 2 learn.learn 2 listen & listen 2 learn.Live 2 love & love 2 live.
We live 2 die & we die living.
life is what u make of it
Hi!!!!
I have a great problem!!! after having "flash" Hardspl correctly, the snapvue is completely black!!
I have tried to "flash" new rom in bootloader, correctly (.... congratulations) but the screen is always black. WHY?
have I also tried to make a hard reset, but is the screen always black?
I ASK HELP TO THE DEVELOPERS!! THANKS!
REGARDS
remove battery
Have you tried to shut down Vista => removing the battery => restart Vista => opening Snapvueside?
This might be a solution.
Qtek9000Jan
The Netherlands
yes certainly, have other ideas?
does someone have a site ftp, to download the HTC original rom?
THANKS!
reset HW
link
enjoy
I have already effected the hard reset, laws well...
?!
reload last rom
I already have reload the last rom, BUT THE SCREEN IS ALWAYS BLACK
ALSO THE AUDIO IN "VISTA" IT DOESN'T WORK
MY HARD RESET INFO:
task 28
task 28
Format start
Fill RSVD information for block 288 to 309
Storage start sector=0x7BC0, total sector=0x3700
Storage start block=516, total block=220
Total Bad Block in CE: 3
Erase physical block from 809 to 1008
formatstorage Bad block found: 901
formatstorage Bad block found: 902
si backup: Erase physical block from 1008 to 1024
Format end
Cmd>
I don't understand why you need to use mtty here. I hope you didn't break your SPL.
Try to use the tool from pof to change to state of the WM side from bootloader mode to standard mode.
Hi thaihugo!!!
have already effected this procedure, but doesn't work!
INFORMATION:
when i re-make the hardspl, after the message "... congratulations" the snapvue him reset automatically or I have to shotdown the device (2 minutes) without battery/simcard and restart?
best regards!!
resolved problem, thanks the same.
best regards!
resolved problem, thanks the same.
best regards!!
Can you please share how you resolved the issue - just in case someone has something similar in the future...thanks
Yes, this is the future, and I am that someone who could have benefited from the solution. Too bad it ain't here.
Get updated (its old actually) shagcontrol & u may hv more options in snapvue tab. soft-reset & hard-reset (clear snapvue) options & flash last known good / original rom using cmonex flashtool / pof customruu.
I managed to solve my pretty nasty issue with the ECSHIFT.exe tool, , had to put my device in bootloader and flashed another ROM. It felt like a near death escape but in retrospect it seems to happen more often.
lucid said:
I managed to solve my pretty nasty issue with the ECSHIFT.exe tool, , had to put my device in bootloader and flashed another ROM. It felt like a near death escape but in retrospect it seems to happen more often.
Click to expand...
Click to collapse
At last you are in the clear now
Lucid my man, do you have a link to the ecshift.exe guide thread?? If there is one of course, so I can put it in my library
ECSHIFT
From CMonex :
download: http://hpcmonex.net/ECShift.exe
you can type ecshift.exe -help to get command info
but the ones that are actually useful commands:
ecshift.exe -bl enters bootloader
ecshift.exe -mode0 exits bootloader (do a soft reset to get back to WM after this command). no battery removal needed!
ecshift.exe -reset soft reset
ecshift.exe -gm status info, mode 0: normal mode, mode 1: bootloader
USAGE:
to enter bootloader mode you need to:
1) run cmd.exe on vista on the shift while the snapvue side is not powered down (doesn't matter if it can't boot to WM).
2) run this command: ECShift.exe -bl
PLEASE give administrator rights to the program if needed!
3) wait until it says it successfully entered bootloader (if you get an error message please let me know)
4) disable WMDC on your shift!!! means under wmdc you must tell it to not allow usb connections!
5) download a special version of mtty for vista from http://hpcmonex.net/mtty_0513_Test.exe and run it
6) select USB in it and you should be in bootloader OK
so if you want to hard reset then do step 7:
7) issue this command: task 28
that's it, you can reboot after exiting bootloader (command: ecshift.exe -mode0, then -reset, or you can also remove battery), this should hard reset your device.
two things:
if mtty can't see usb then remove battery, reboot the snapvue and try the app again.
and bootloader is not tricolour screen, it is black.
and AGAIN, please do not ever try issuing task 2a! never! it will brick the device!
Can't find USB
Hi. I did something wrong I guess. I flashed the first RomeOs release and it seemed to be OK. Suddenly I had problems. Nothing worked. I tried to reset and then it happened - blank screen.
I have tried almost everything buyt nothing helps. Now I have tried this EShift thing but I can not find USB from that other exe. I have disabled USD form my WMDC...
Help...
@6sto
What USB u need? Just flash last known good working rom from xp/vista/seven side. BTW, which version did u flashed?
Monx, A hunch, I suspect something in your preconfiguration script or bootscript makes the Shift hard Reset or fail completely. But I just see you released version 1.03 and that's just what I will flash now.
I want your ROM. It's sweet and SnapVue sexy.
The thing started when I had problem to charging the zuk.
Then, just before travel to SF, my mobile phone didn't charge anymore.
At the beginning, I thought it was a software issue so I started to do many manipulations in the TWRP recovery during the plane to SF.
At the end, I totally brick the phone and delete the OS(delete all the data).
So when I came back( yesterday), I tried to flash with fastbootmode and it works. But when ou have the message :"updating app 1 on 82, 2 on 82 and so on", you have at the end (starting app) and the phone restarted everytime. I tried to flash different official COS update but the result was the same.
So, in my last breath, I tried to relock the bootloader..... And reflash COS.... Big mistakes . I have no OS anymore because when i try to flash, at every step, ( recovery,system, modem and so on) a message is prompt: (impossible to flash, BOOTLOADER lock (something like that))
So i tried to unlock the bootloader but now I have this message : Impossible to do it OEM no allowed that (or something like that)....
To summarize:
- My zuk is dead
- No OS install
- No data on the phone
- Impossible to flash a new rom because the bootloader is lock
- Impossible to unlock the bootloader
But i have the Cyanogen recovery access and the fastboot mode. But only that....
If someone can help me
gaara19 said:
The thing started when I had problem to charging the zuk.
Then, just before travel to SF, my mobile phone didn't charge anymore.
At the beginning, I thought it was a software issue so I started to do many manipulations in the TWRP recovery during the plane to SF.
At the end, I totally brick the phone and delete the OS(delete all the data).
So when I came back( yesterday), I tried to flash with fastbootmode and it works. But when ou have the message :"updating app 1 on 82, 2 on 82 and so on", you have at the end (starting app) and the phone restarted everytime. I tried to flash different official COS update but the result was the same.
So, in my last breath, I tried to relock the bootloader..... And reflash COS.... Big mistakes . I have no OS anymore because when i try to flash, at every step, ( recovery,system, modem and so on) a message is prompt: (impossible to flash, BOOTLOADER lock (something like that))
So i tried to unlock the bootloader but now I have this message : Impossible to do it OEM no allowed that (or something like that)....
To summarize:
- My zuk is dead
- No OS install
- No data on the phone
- Impossible to flash a new rom because the bootloader is lock
- Impossible to unlock the bootloader
But i have the Cyanogen recovery access and the fastboot mode. But only that....
If someone can help me
Click to expand...
Click to collapse
EDIT: Sorry, I post on the wrong section. If someone can move this post on the right section ...
gaara19 said:
The thing started when I had problem to charging the zuk.
Then, just before travel to SF, my mobile phone didn't charge anymore.
At the beginning, I thought it was a software issue so I started to do many manipulations in the TWRP recovery during the plane to SF.
At the end, I totally brick the phone and delete the OS(delete all the data).
So when I came back( yesterday), I tried to flash with fastbootmode and it works. But when ou have the message :"updating app 1 on 82, 2 on 82 and so on", you have at the end (starting app) and the phone restarted everytime. I tried to flash different official COS update but the result was the same.
So, in my last breath, I tried to relock the bootloader..... And reflash COS.... Big mistakes . I have no OS anymore because when i try to flash, at every step, ( recovery,system, modem and so on) a message is prompt: (impossible to flash, BOOTLOADER lock (something like that))
So i tried to unlock the bootloader but now I have this message : Impossible to do it OEM no allowed that (or something like that)....
To summarize:
- My zuk is dead
- No OS install
- No data on the phone
- Impossible to flash a new rom because the bootloader is lock
- Impossible to unlock the bootloader
But i have the Cyanogen recovery access and the fastboot mode. But only that....
If someone can help me
Click to expand...
Click to collapse
try to use QPST (Qfil) method. This is final method can bring back your phone. If fail, congratulation ! :silly:
I success with QFIL Zui works but it's awful
Unfortunately, I try to install stock cos but I have the same issue.... Bootloop after "App update message".
I don't know why
Try flashing Cyanogen Os using fastboot
I did that...
I flash with the tool via fastboot. But bootloop result...
I also tried to flash CM13 via TWRP but I have an error message...
Do you have any other solutions?
I don't know why, Zui works well but i can't install any other roms:
- COS crash after the first boot.
- Other roms are impossible to install via TWRP...
I don't know if it's because I have an hardware issue( Fingerprint doesn't work) so the mobile crash.
I changed the partition system type but now I think that evrything is ok : System is ext4
If you can help me, it could be very nice
Here u go, QFIL CM 12 ROM: https://mega.nz/#!RFUw2CbZ!GXS6KeOy_8n2y_rOBJUS5WJSP5kchODcGUF0U1TxYO8
So with the ham version is the same as the QFIL version?
gaara19 said:
I don't know why, Zui works well but i can't install any other roms:
- COS crash after the first boot.
- Other roms are impossible to install via TWRP...
I don't know if it's because I have an hardware issue( Fingerprint doesn't work) so the mobile crash.
I changed the partition system type but now I think that evrything is ok : System is ext4
If you can help me, it could be very nice
Click to expand...
Click to collapse
READ THIS( use google translate)
BTW, what are the fastboot commands that you are using?
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?