My lcd stopped working by itself it showed blank white screen anyway datz not da main problem now it was accidently put in da washing ma2hine now it doesnt come on when in the charger it shows a red ligght
Related
Hy
I try to replace a broken screen by a new one but, i have a white screen, i chek all and i can't find the pb.
I tried also to replace with the bad who have just some picsel defect, but is blank too?
Do U think I crash my Kaiser?
or I forgot something?
I just installed my new LCD & the same happened. I took it apart again & noticed that the ribbon cable that connects the bottom buttons to the top LEDs was torn. It sucks! Now I have to find a cheap replacement. :-(
yah Im in the same boat....white screen...the phone works fine....what ribbon does one need? is it just the flex cable ribbon attached to the lcd or is it this thing (link)
hi all,my diamond screen don´t start and no light nothing,but my pc connect,i changed the rom but nothing happen,it´s my screen dead or what
ths
the problem is the flex connector at the back of the display
give it to htc support, they'll fix it
it shouldn't be very costly
ths
ths ,i will try t change the display,it´s on the road to madrid
ths anyway
the lcd is fine!
its just the connector thats loose
few weeeks back i changed the roms
which i used to do noramlly
but this time the screen started showin white screen when i was sliding and when i tap on the screen or at the borders it returns back to normal state
whether any problem with the touch screen
whether it can be managed with my self or it needs some technicians help
souds likes bad ribbon cable..
See if others feel the same..
bad ribbon wat it can be done locally or has to be sent to htc cc?
i dont have htc cc locally
from where to get the ribbon cable or my kaiser
Hi to all,
After droping my phone a few times, I had many black pixels wich were increased while charging and then decreased again. I also had Newton circles and if there was pressure for some time the digitizer appeared stuck and was not responcing untill were pulled with tape or by "kissing" the stuck spot. I bought from e-bay a digitizer and a lcd screen(Item number: 280609930728), replaced them both (for the digitizer i used hair dryer and the inclueded opening tool to seperate the digitizer and UHU glue to glue the new one).LCD is working fine but I tried to align the digitizer but it was looping, I also tried programs to do that from pc, still not getting ressults, I tried to reset the numbers from registry and they returned, I also got loosen the screws by 1/4 of a turn and nothing happened. I did not hard reset but something tells me that it won't help. Any ideas?
have u tryed to align the screen with oem solution?
settings>align screen?
You had put the wire tape of the digitazer upside-down. turn it over and it will be ok.
Hello
i have problem. i have droped x8 from about 1m and when i get it in my hand the screen was black.
Probably the screen is broken. But before i orded new i have open my x8 and see that screen is not broken or something like that.
there are no color just black. and sometimes when i press it harder i get vertical green line.
is this the screen or the hardware on my phone.
I have check the mbo but its seems fine...
so give me your opinion
http://www.youtube.com/watch?v=-VTJpkHBrJE
here you can see on 0:58 how the screen is broke in my case is not the same my is all black and when i turn on phone just litlebit light up and thats all.
in up left corner i have litlebit white and thets it
Sry on my bad english
It looks broken i think.... But how did you manage to broke your x8 i have dropped my many times even throwing it without anything happend
i dont know i was just put another karnel and rom.
and its just fall from my pocket becouse i have the hole -.-
and its just black screen. i have order new lcd from ebay. But i will kill myself if the mbo is dead -.-
IMO if You turn on Your phone and You can see green light and feel quick vibration than only the screen (or digitzer) is broken. So if You replace it with new one everything should be fine.
yeah its light up green the led and vibrates. but screen is dead. the digitizer is fine.