few weeeks back i changed the roms
which i used to do noramlly
but this time the screen started showin white screen when i was sliding and when i tap on the screen or at the borders it returns back to normal state
whether any problem with the touch screen
whether it can be managed with my self or it needs some technicians help
souds likes bad ribbon cable..
See if others feel the same..
bad ribbon wat it can be done locally or has to be sent to htc cc?
i dont have htc cc locally
from where to get the ribbon cable or my kaiser
Related
Hello all.
So, long story as short as possible:
My Tilt got run over, LCD screen was busted but I could still make and receive calls by sliding it open, hitting the call button and using the keyboard to dial and 'enter' to connect.
I was also still able to connect to the phone via bluetooth from my mac, as well as syncing it on my PC partition.
Eventually, I think I hit too many random buttons and turned the phone off or something as I could no longer get it to dial out this way. I was always getting the flashing green and blue lights though.
After some research (and un-won auctions on eBay) I decided to see if popping in a new LCD screen would fix my situation.
I installed the new LCD last night, and the machine is almost back to living, however, I now have the current problems:
When the phone boots into 'normal' mode, the screen is display is very truncated. It doesn't display the full HTC updated today screen and won't respond to touch. It says 'no service' but wi-fi seems to connect. If I slide it open, the keyboard lights up but doesn't respond, neither do the front keys. Also, I get only a solid orange light in the upper left LED.
If I boot the phone into 'Safe Mode' it responds to touch, connects to the AT&T network, connects to Wi-Fi, etc. The front keys still do not do anything, and when I slide it open the keyboard does not light up or respond. Also, I get both the green light in the upper right and blue in the upper left.
Another thing, when I slide the phone open and closed there's a slight ripple in the middle of the phone like something is 'pressing' on it from the back.
Sorry for the novel. Any help is appreciated. I'm considering 'clearing storage' and returning it to factory settings or flashing the ROM. I've taken it apart and put it together like four times now, checking, double checking and triple checking connections.
Thanks!
Sounds like one of the headers isnt fully seated in the display region. IIRC there are two that I had to deal with with my 10min LCD swap routine
Yeah, I think you're basically describing symptoms of having put the phone back together wrong except that it's interesting it responds in this 'Safe Mode' and interesting that it would happen after four retries
It's probably going to need a hard reset then! You might want to check nothing has been bent, warped mountings/plastic could be the cause of the screen ripple issue.
Were there any active components on the touch film for the display? (Assuming you have replaced that too with the LCD, or that they're one whole unit) if that is the case, they may be different, newer revisions? Really grasping at straws there though; at the end of the day, the poor phone has been mauled by a wheel... best of luck!!
Thanks for the thoughts! I guess I could try and break it down again. As far as I could tell, everything looked like the phone in the disassembly directions; nothing appeared unduly bent or mangled.
"Sounds like one of the headers isnt fully seated in the display region."
I'll google it, but what 'headers' are we talking about? The small metal bits that seem to touch the upper outside edge of the LCD screen?
Would an improperly seated header cause the other symptoms? Unresponsive other buttons (keyboard, front keys) and connectivity issues with the network?
"Were there any active components on the touch film for the display?"
I got a new LCD and digitizer (is that what you mean by other active components?).
Thanks again!!
AtillaDNun said:
Thanks for the thoughts! I guess I could try and break it down again. As far as I could tell, everything looked like the phone in the disassembly directions; nothing appeared unduly bent or mangled.
"Sounds like one of the headers isnt fully seated in the display region."
I'll google it, but what 'headers' are we talking about? The small metal bits that seem to touch the upper outside edge of the LCD screen?
Would an improperly seated header cause the other symptoms? Unresponsive other buttons (keyboard, front keys) and connectivity issues with the network?
"Were there any active components on the touch film for the display?"
I got a new LCD and digitizer (is that what you mean by other active components?).
Thanks again!!
Click to expand...
Click to collapse
Any cable that attaches to the circuit boards, re-seat every one you can find. One faulty connection can cause a lot of problems. I have a similar problem with a button on my PSP but im to lazy to fix it.
Hello, I am a true noob so please forgive me if I sound dumb.
I had a broken screen so I bought a new one on Ebay. I changed it perfectly, it looks good but now when I touch the screen it acts like I touched the top left corner (in portrait)no matter where on the screen I touch (so it opens up the "Start" menu). In landscape it acts like I touched the top right so it opens up the drop down menu with all the running programs.
I would really appreciate some help. I try re-aligning the touch screen but it does not recognize any touches at all. I have to soft reset the phone to get out of the re-align program.
I don't want to hard reset because I have read many cases where the phone gets stuck in align program as it is trying to setup and they have to install remote access or something to get around it.
I would like advise on whether it is the new screen or the phone. Is there something I can check for inside or should I send the screen back for a replacement.
Thank you for your help.
Having replaced the touch screen in a Palm with success, I would say that...
You either have a problem with the connector for the screen, recheck the connection
Someone sold you a bad screen.
Something else is wrong with the device.
At this point I don't know that in your position I wouldn't do a hard reset. What is the worst thing that can happen? The device is already broken in it's current state.
Good luck.
Thank you
Thank you very much for your help. I will try the connector. if it does not look damaged then I will return the screen.
Did you replace just the screen itself, or the screen and the digitizer? More than likely your digitizer is broken aswell. If you replaced them as a set, request a new one from wherever you got it, and if you just replaced the LCD, then you need to buy a digitizer aswell.
ashasaur said:
Did you replace just the screen itself, or the screen and the digitizer? More than likely your digitizer is broken aswell. If you replaced them as a set, request a new one from wherever you got it, and if you just replaced the LCD, then you need to buy a digitizer aswell.
Click to expand...
Click to collapse
Well, I only received the screen. I cant figure out where the digitizer is on the tilt so I don't know if I changed it or not. Does any body have any picture??
I think I read somewhere that it all comes as one piece(the screen and digitizer), but I can't confirm it.
Indeed they most of the time do come as one peice, so if your connection is good on the mobo, then I would say that the digitizer you recieved is bad. The digitzier is the super thin peice of glass that covers the LCD screen.
So my Screen broke and I bought a new one so I could replace it, the touch screen/digitizer didn't break though... at first the colors just started washing and fading untill the screen ended up completely dark, I could still use the touch screen and feel when I would unlock it, after a day the phone would not give me any feed back by vibrating or turning the orange light while charging, so I dismantled it using some tips from these videos:
http://www.youtube.com/watch?v=Hhj8Xs9vAyg
http://www.youtube.com/watch?v=hTRXSMQ-GJY&feature=related
After I put everything back together the phone is giving me feedback again and I can notice its charging because of the orange light, but the screen won't turn on. Does any one know if I might need to do something on the software side? like needing to re install anything? or do you think I just got a bad screen?
Update: I just took it apart again and reconnected the ribbons, its back together and the screen still won't turn on.
You have the AMOLED screen and not the LCD?
Did you compare the #'s on the old and new to see you got the right part?
Cables are the same, they look the same, part # and stickers are different...
What are the part numbers on your new and old screen? I just went through the same thing, but I'm fairly sure I got the wrong screen replacement. Will have to look more into it later tonight.
My screen wont turn on at all. I was so excited to get my N1 back in action as well.
Well, I fixed my old broken G1 with new screen, touchscreen panel, case and keyboard.
Now I have 2 issue:
1) Sometimes my touchscreen goes grazy!! If I use the touch test application I see that sometimes when I touch the screen in an area there is another virtual touch in another zone of the screen. I read that it can depend from the current source when I charge the phone.. but I'm going crazy!! I opened my phone 10 times (I thought there was a problem in the cable that link TouchPanel to LCDPanel, because when I lock the cable with the clip it tends anyway to go out from the connector, now I put some scotch tape to fix but the problem is here.. so I think is another problem).
2) My volume rocker doesn't work!!
I bought 2 new keyboard to fix this problem, but no one of that fixed the problem. I thought the first new keyboard had volume keys broken, so I bought another one, but the problem persists!!
Now the Touch problem rarely happens, but the volume rocker is completely unusable..
Someone have experience about G1 assembling/repairing ?
Thanks and sorry for bad english
if you have put in multiple keypads have the same issue i would assume that it is the connection going to the motherboard. just a guess there but its either that or you have had a bunch of faulty keyboards.
only other thing would be a software problem
does the keypad work in recovery (let you go up down throughout the list) ?
as for the touch screen, probably need a new digitizer or flex cable, both are cheap and it sounds like you have the knowhow to replace them.
Ok, but digitizer is new!! screen also is new, and I have bought a total of 4 flex cable because I see that they are fragile (I broke the first I bought).
I tried to change flex cable but the problem remain the same.
The only thing that can be damaged is the LCD cable that links to the flex cable: it has a small cut where the cable have a curve, but the cut don't reaches the contacts (the cable is transparent). I also use some glue and scotch tape to mantein lock the cable.
The digitizer cable is connected to the LCD cable, and then they go to the flex cable that connect them to the motherboard.
The strange thing is that seems a software issue, because if I turn off and than turn on the screen, the problem is fixed for some seconds, minutes and sometimes hours...
Another strange thing is the possibility to control the screen with some metal objects from the moment that the virtual touch problem appear (I can control the screen also without touch it, with hand and piece of metal)
video:
have you tried a factory reset if you think it may be a software issue? if that dosent work you can try install a whole new rom.
really it sounds like it isnt the hardware since you appear to know what youre doing. i have a had a few phones that had screen (digitizer) issues and a new rom flashed cured it just fine
since you dont mind putting a few dollars into it, and your familiar with the inside, you can always try to pick up a cheap motherboard or spare phone from ebay or what have you, then swap the motherboard and you could then hopefully find out if it is the hardware or software
nagash91 said:
Another strange thing is the possibility to control the screen with some metal objects from the moment that the virtual touch problem appear (I can control the screen also without touch it, with hand and piece of metal)
Click to expand...
Click to collapse
Huh sounds like you got a cheap digitizer than. Most good digitizers use heat to touch. If it's literally touch, then sounds like its a fake/meh digitizer. i hate the digitizers that aren't heat, but press. I see them all the time in those first samsuck touchscreen phones. And they usually die in a bit. I had a Samsung behold with a screwed up digitizer
demkantor said:
have you tried a factory reset if you think it may be a software issue? if that dosent work you can try install a whole new rom.
Click to expand...
Click to collapse
Yes I flashed 3 or 4 roms after a wipe (I tried also super-wipe.zip), but the problem is here..
The digitizer works well some times, but sometimes get crazy (you can see in the video).
I don't that my new digitizer is fake, but I really don't know!
BTW I'm trying to repair my phone for fun (now I have desire z) and because I am fascinated by my old G1.
PS:
I see another strange issue--
If I touch the screen when the phone is on a table the screen digitizer is not very sensitive and can't take input from fingertips.
If I touch the screen when the phone is in my other hand, the screen digitizer is a lot more sensitive and it take input from fingertips.
My impression is that there is an electric field or something similar that disturbs the digitizer, and when I take the phone in my hand I discharge that field to ground. Also when I turn off the screen, seems that the electric field discharge so when I turn on the screen is ok, but after some seconds the field returns to disturbs the screen.
I really don't know, but is the impression that I have.. something that is not shielded.
Now I'll try to use my phone in airplain mode.
Thanks guys, I'm happy to see that this forum is still very active
Hi, I recently dropped my phone and now the screen is blank. When i turn on the phone the whole screen is blank, the phone vibrates when it powers on but nothing is visible. Even when i get calls i cant attend them. There are no scratches or cracks on the screen after the fall. This is the first time i have experienced this and any help is appreciated. Thank you
I think the LCD is connected to the phone's main board by a connector that snaps into place. If you dropped the phone, I think it's a possibility that this connector could have popped out. It would only take a few minutes to open it and check for this. http://www.youtube.com/watch?v=0A4zbBKkcKU Skip to 2 minutes and 50 seconds into the video and you will see this connector.
Unfortunately it's possible that when you dropped it, the LCD screen was damaged even though you can't visibly tell just by looking at it.
thank you very much will try it