Back to Original ROM... Help Please - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I've been having issues with my T-Mobile MDA... the explanation is posted here...
http://forum.xda-developers.com/showthread.php?t=289561
Basically I have tried hard resets and after having used X's 2.26 ROM for like 5 months or so I want to go back to the most basic ROM possible that I can run on my phone to see if it solves my issue.... The issue is that my touch screen only works in landscape mode and not in portrait mode... real weird and it just started happening.
so can someone point me to the most basic factory ROM that i could flash my MDA with to see if it may possibly solve my problem!? thanks in advance
-gary

Go to the Wiki (see the sticky post about it) there is a whole page dedicated to listing all of the ROms.

Related

Help me with this camera thing...Tilt...

Ok i have done all the following steps from jocky forum guide and now i unlocked the CID whichever you call it. now i went thru all to test it out its still the same but i do see the word... inex which mean its already flashed anyways i press the camera buttons and the camera showns plain black screen and can i asked why? or its not done developing yet till i put in the cooking rom? i dont know how this work but to tell you that the camera is showing just plain black screen of course the album and others are there but when trying to take a picture its just plain black i even moved around toward the light and still black.... so any idea of helping me out here? and also is there a way to reset the tilt back to normal instead of doing the clear storage setting... please help and i would greatly appericated it.
Hard to understand what you're trying to say, but... If you flashed a custom ROM, you might not have the correct radio version for it. Each ROM will require certain radio versions to work properly, and the radio isn't always included with it so you need to read, find what radio version is needed, and flash it yourself.
Sounds like you have the wrong Radio.
Radio's need to be matched to the ROM you are running. Some of the unlockers flash special patch radio's. You need to re-flash a normal one.
Have a look at this thread and select a more appropriate one: http://forum.xda-developers.com/showthread.php?t=393182
Thanks
Dave

Rom Updated has gone wrong please help

I used Unsigned_HardSPL_for_Blackstone_OliNex 1.56 then i used
RUU_BlackStone_HTC_TUR_1.56.468.0_Radio_52.62.25.34_1.13.25.24_Ship
to change it to turkish.
It seem to all go well but,
Now when i start the phone the colors are all wrong as if it is running @ a very low resolution.
I have attaced a few pictures to show the situation.
Also if you look @ the last picture you can see that when i power off then power back on the resolution is correct but the screen seems
very unresponsive.
I have tried to Restore_Stock_SPL_113 but not actually sure if it was the same one.
I have also tried USPL GUI v 2.5 (no difference)
I have tried HD_WM65__V63__B23053COM3__D091809
And i have finally tried Miri_WM65_23017_Premium_Manila_2.5_REV7.1
I dont no what else to do i have searched and read various posts regarding what i actually wanted to do and how to retify this problem but i cant find a solution.
If anyone has any answers i would really appriciate it.
If the answer has been looking me in the face and i have miss it im sorry.
Thanks.
just install the newest stock rom from the htc website and then the rom of your choice.
then the colors will look normal again
It looks like your spl is wrong for the rom, the colour problem is typical of this situation.
You mention that you tried hspl - 1.56.Olinex. Are you sure it installed successfully? If you go into bootloader mode, does it show 1.56.Olinex on screen? Any one of the roms you mention should work perfectly with 1.56. Please take any other queries to the Dummies Guide thread as the mods will close this one down.
As above, it looks like your SPL is incorrect and HSPL 1.56 has not been successful. Check your SPL in bootloader and post further queries in the dummies guide thread.
Thread closed

Returning to Stock for repair! URGENT

Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
To add an update, the boot loader screen shows:
BLAC100 32M
SPL-1.56.OliNex
Micro-Blackstone (LED) v6
Thought this might help in finding out how much work to stock?
I Think u need the original rom... or a htc one from the website?? ... can it not be downloaded from the htc website?? i may be wrong
I do but also need to make sure I do an original spl and radio as well
first off go to htc.com and download the romupgrade thats on that side (ive non is on the side check the wiki for youre countryrom)
then flash that one and se ive radio comes with it
ive not flash radio 13.**.**.**
then from the hard spl thread there a tut how t make youre spl stock again and youre finished
This is the last official ROM with 1.56 spl and 1.13 radio
h..p://rapidshare.com/files/231263089/-HTC_Touch_HD-MR_2009-RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
J7ody said:
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
Click to expand...
Click to collapse
At boot it shows, just restart your device and look at the red text in the bottom right corner, there it will show your current radio version.
Could also see it in device info when the device is on but dunno if you still can considering you need to return it.
gl.
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Curious????
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I also have read a couple of these help requests and the same problem, but what could it be, is it the windows mobile 6.5 builds that are doing this (not blaming the chef's in anyway), or some conflict with the spl... have to investigate this more...
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Returning to Stock for repair! to having screen problems after changing the rom
J7ody said:
Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
Click to expand...
Click to collapse
dataSaMm said:
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Click to expand...
Click to collapse
Hi, can someone (Admin) change the title of this thread from Returning to Stock for repair! to Having screen problems after changing the rom?
I think the first is solved and now we have this new problem in hand.
best regards
+1
i've had the problem with a cooked french rom (Pyrana V17C). My screen started to freeze for a few seconds. During that time, when I put the finger on the screen and slide, the screen follows the move but it comes back to where it first was, ant the move is finally not taken in consideration ... it looks like the screen is an elastic...
So it did it sometimes and it lasted a few seconds first, and then, a couple af days later, it was more often, and I had to soft reset everytime, and yesterday, I finally had to hard reset to take back the hand, and the bug came back more quickly. So I installed the latest release of this rom this morning and everything seems to be stable since a couple of hour. If it comes back I'll try another rom, but if someone can find a way to set this, that would be perfect ...
J7ody said:
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
Click to expand...
Click to collapse
You've found your solution to original query and returned device to stock rom & SPL. Thread has now run its purpose
Thread closed

Help, BIG problem

Guys I have a big problem, please try to help me.
Ive been having my Touch Diamond for over a year now. I started to flash it 6month ago. I followed all the steps with Hard SPL and radio and then ROM.
I have been using BSB6.5 roms since the first day. But now recently when I upgraded to bsb6.5.1b, my phone after a couple of hours or (if am lucky) one day hangs, then I soft reset it then it takes long time to start then suddenly ALL applications and programs in the phone starts and then the phone warns me about program memory and then it hangs. I tried to flash over and over again but the problem still come back. Could someone please help me ? Someone had the same problem?
(I ALREADY SEARCHED FOR A THREAD WITH THE SAME PROBLE)
wow that is strange, try going back to a wm 6.1 rom than back to your 6.5 roms. Sometimes this causes quite a few weird problems like yours.
and remeber to hard reset at least twice between roms
I´ve read before in a thread how to reset the phone (boot, Hardspl, rom) back to its original form/condition. I tried to search and find that thread but i couldnt find it. Do you got an idea where I can find it ? I thought maybe I can try to do everything from scratch will help.
Is this wot you need big http://forum.xda-developers.com/showthread.php?t=537496
ooh yes...thanks man appreciate
i would recommend you try the mtty method once:
http://forum.xda-developers.com/showthread.php?t=540290
good luck
yeah he has a point big, use mity to format your device, maybe you solve the problem without having to flash stock spl

New rom 6.5 probs

Hello
I've tried some roms that i download from here and i had a lot of problem with all of them.
problem in graphics problem with the phone the get stuck a lot even the phone doesnt work.....
WIFI and BL working but phone is not.
Anyone know how can i put this operation system without probs?
Thank
Installing new ROMS, make sure you hard reset right after the phone reboots from a fresh ROM Load. People have noted here that problems almost always surface without the Hard Reset on a fresh ROM.
Try it and let us know
Yea i did it and it wont work and when i triend to put the older version 6.1
it do the same Graphic probs
The big problem is that he dont recognize the Sim phone it wont connect .
Sorry And also the button isnt working too sometimes.... im in trouble anyone?
a very basic question: the SPL version currently on your phone?
Wow, dude read the dummies guide, please. The stickies are there for a reason!
http://forum.xda-developers.com/showthread.php?t=505377
As above 2 posts it sounds like a common issue with SPL's not matching. Read dummies guide thread (post above) and post further queries in that thread
Thread closed

Categories

Resources