Database Develop

ORANGE + Phonepad Nightmare!

Hi Everyone,
I have a nice shiny orange spv m700. Unfortuantly, in Orange's wisdom they supply a ROM which does not have any form of thumb based text entry.
In order not to void my warranty I am not going to flash the ROM. Especially as I have tomtom 6 working perfectly and removed the orange garbage from the today screen.
However I am going mad withouth t9 text entry! I have downloaded and installed phonepad english, phonepad international, tengothumb and none of them work! They install fine but not come up when you select them. Ive tried setting them to default text entry but to no avail. I have installed them on the device not the memory card and there is lots of memory spare.
Can someone please help me has anyone found the trick? I have 7 days to return the phone but until i try phonepad i dont know whether i want to keep it (never used a phone withouth keyboard before).
Thanks in advance
Warny

me too
i have been asking about this too the last day or so. the dopod rom has it built in but i am worried that once i have put the dopod rom on then i cant go back to the orange one if i dont want to keep the phone.
No one seems to be replying about dumping my original orange rom so at the mo we are a bit stuffed.

warnysouth said:
Hi Everyone,
I have a nice shiny orange spv m700. Unfortuantly, in Orange's wisdom they supply a ROM which does not have any form of thumb based text entry.
In order not to void my warranty I am not going to flash the ROM. Especially as I have tomtom 6 working perfectly and removed the orange garbage from the today screen.
However I am going mad withouth t9 text entry! I have downloaded and installed phonepad english, phonepad international, tengothumb and none of them work! They install fine but not come up when you select them. Ive tried setting them to default text entry but to no avail. I have installed them on the device not the memory card and there is lots of memory spare.
Can someone please help me has anyone found the trick? I have 7 days to return the phone but until i try phonepad i dont know whether i want to keep it (never used a phone withouth keyboard before).
Thanks in advance
Warny
Click to expand...
Click to collapse
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.

sunlip said:
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
Click to expand...
Click to collapse
It will work, u just need some hack

sunlip said:
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
Click to expand...
Click to collapse
Hi,
Great thank do I install this before or after phonepad?
Thanks
W

sunlip said:
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
Click to expand...
Click to collapse
Hi, it doesnt work for me. I install the cab you supplied on the device, did the setup and soft reset, still does the same thing (select phonepad in list and nothing happens)
any more ideas?
Thanks
W

warnysouth said:
Hi,
Great thank do I install this before or after phonepad?
Thanks
W
Click to expand...
Click to collapse
Install phonepad, then G4 SIP tweak, then select phonepad as startup SIP in G4 SIP Tweak, soft-reset. It works for me.

warnysouth said:
Hi, it doesnt work for me. I install the cab you supplied on the device, did the setup and soft reset, still does the same thing (select phonepad in list and nothing happens)
any more ideas?
Thanks
W
Click to expand...
Click to collapse
WOOOOOOOOOOOOOOOOOOOOOOOOOHOOO PHONEPAD UP ON THE ORANGE! uninstall phonepad, install G4 tweak, install phonepad international, and bobs your uncle! THANK YOU VERY VERY VERY MUCH

hurray
I had to try it a few times on mine and piss about with it but it is now working.
Thank god for that. We got there in the end.
Thanks guys.

rjefferis said:
hurray
I had to try it a few times on mine and piss about with it but it is now working.
Thank god for that. We got there in the end.
Thanks guys.
Click to expand...
Click to collapse
Yeah I just did a fresh install of everthing and now it doesnt work again. Hmm it seems its not repeatable. yet.

Please can someone post links to the relevant files needed to do the above. Actually I see the G4 link above so just phonepad if poss.
Thanks

rjefferis said:
hurray
I had to try it a few times on mine and piss about with it but it is now working.
Thank god for that. We got there in the end.
Thanks guys.
Click to expand...
Click to collapse
How did you get it to work?

Cheers the G4 does the trick

thank you for the solution!! worked first time for me, installed the tweak then phone pad english and soft resetted. so glad to have phonepad back!

OK I got the G4 Sip program installed but the phonepad never works - just pops up the standard keyboard. I have a Orange M700 - any suggestions? Thanks

Uninstall both then install sip change, reinstall phone pad select phone pad as default and it should work...
Or if all else fails purchase SK tools as this always works and has many useful extra features.

Thanks for all the useful info
I got mine working on my SPV M700 by:
1) Uninstall SIP Change & Phone Pad & G4 SIP Tweak (If you have any of them installed already)
2) Copy G4 SIP Tweak CAB to PPC and install
3) Soft Reset
4) Copy Phone Pad CAB to PPC and install
5) Soft Reset
6) Copy SIP Change CAB to PPC and install
7) Soft Reset
8) Start SIP Change (From Start Menu - Programs) and select Phone Pad and make sure delay is set to 10
9) Soft Reset
This is the only way I have managed to get mine working, and I dare not reset the device again incase it fails lol

Yet another hapless convert to smartphone
tattoo_gaz said:
Thanks for all the useful info
I got mine working on my SPV M700 by:
1) Uninstall SIP Change & Phone Pad & G4 SIP Tweak (If you have any of them installed already)
2) Copy G4 SIP Tweak CAB to PPC and install
3) Soft Reset
4) Copy Phone Pad CAB to PPC and install
5) Soft Reset
6) Copy SIP Change CAB to PPC and install
7) Soft Reset
8) Start SIP Change (From Start Menu - Programs) and select Phone Pad and make sure delay is set to 10
9) Soft Reset
This is the only way I have managed to get mine working, and I dare not reset the device again incase it fails lol
Click to expand...
Click to collapse
Hi, hope this thread isn't dead just yet...as a newbie here and a recent convert to the world of the touch screen... I've had a good search around the web for a thumb entry system (have to admit thought is was a standard feature on smartphones cos I'd seen it working on an O2 XDAmini. So was more than a little dissappointed to find it wasn't on the M700 (after my 7 day's were up).
I've tried installing tengo thumb with the same limited success as a previous contributor, lots of resets I assume a soft reset is button on the bottom you prod with the stylus?
I've tried various combinations of loading G4 SIP Tweak, and Phone Pad cab, and have the 'Phone Pad appears in list but doesn't do anything' problem...
I noticed in your post you mentioned uninstalling 'SIP Change' that's some I've not downloaded separately, got the G4 SIP tweak and the phone pad.
Also there appears to be two places (3 including the input icon in settings) where you can select Phone Pad there's 'G4 SIP Hide' in the sytem menu where it say's don't choose the wrong SIP here as its likely to **** everything up. And then there's the 'G4 Sip Startup changer' in my programs directory. Are either of these the 'G4 SIP Tweak' utility.
So i'll give it another go but wondered if I've
1. got the right cab's, tweaks and whistles
2. got my SIP application confused
3. just plain confused
Any help greating appreciated.
Also must be trying too hard with the stylus as I'm on no. 2 already!
Thanks for listening

Awesome, this has been plaguing me for a long time, whatever i did i could not get any keyboard except the standard ones to stick and be useable, fine with a stylus, no good for one handed operation.
Now it all works and like the rest its a case of remove anything resembling SIP management and alternate SIPs and then install G4 Tweak and then Phone Pad, select PhonePad in the G4 interface and soft reset. Bingo a working phone pad.

Phone Pad
inanimateman said:
Hi, hope this thread isn't dead just yet...as a newbie here and a recent convert to the world of the touch screen... I've had a good search around the web for a thumb entry system (have to admit thought is was a standard feature on smartphones cos I'd seen it working on an O2 XDAmini. So was more than a little dissappointed to find it wasn't on the M700 (after my 7 day's were up).
I've tried installing tengo thumb with the same limited success as a previous contributor, lots of resets I assume a soft reset is button on the bottom you prod with the stylus?
I've tried various combinations of loading G4 SIP Tweak, and Phone Pad cab, and have the 'Phone Pad appears in list but doesn't do anything' problem...
I noticed in your post you mentioned uninstalling 'SIP Change' that's some I've not downloaded separately, got the G4 SIP tweak and the phone pad.
Also there appears to be two places (3 including the input icon in settings) where you can select Phone Pad there's 'G4 SIP Hide' in the sytem menu where it say's don't choose the wrong SIP here as its likely to **** everything up. And then there's the 'G4 Sip Startup changer' in my programs directory. Are either of these the 'G4 SIP Tweak' utility.
So i'll give it another go but wondered if I've
1. got the right cab's, tweaks and whistles
2. got my SIP application confused
3. just plain confused
Any help greating appreciated.
Also must be trying too hard with the stylus as I'm on no. 2 already!
Thanks for listening
Click to expand...
Click to collapse
I was in a similar position to you. I managed to get mine working eventually - I found that I didn't need Sip Change. I just installed SIP Tweak, then Phone Pad. I think perhaps the key thing is to soft reset immediately after selecting Phone Pad on Tweak. Once I'd done that it finally worked, and has continued to work even after when I've shut down normally.

Picsel Browser 1.0.5

Anyone know where we can get this browser?
Is it free or commercial?
I hear about it, but cannot find it!
Thanks

Find the information in here
http://www.picsel.com/index.php/solutions/view/C11/

I tried and it is amazing, like i use i-phone. I can move the page with my finger by shifting up and down or lef and right. Good browser, it can handle many thing it can be use in himalaya

I tried to get trail version but no sucess.
Even to buy it is not mention any whare.
I contacted them, waiting 4 reply.!!

PM me if u want the Working version of this Browser..i also have Deepfish (from Microsoft)...

Do picsel browser and/or deepfish work on al websites or should the website builder install server side software or thumbnails created in advance for it to work?

Be carefull may be there is incompatibility with WM6. I found my device became messy My touchscreen like a mirror. My "start" picture is still in the up left corner but when I want to open it, I have to touch at the up right corner. And It is also happened with the other position
I have to do hard reset to overcome this problem

I use wm6 and have used picsel before, but when I install the same cab now, I get an "initialization failure". Maybe its becvause I've done a hard reset a while ago.. does anyone know the solution, cause its a great browser!!

Hi all,
I am looking for a working Version for my himalaya.
Can somebody help me
xwilli

Rare bol - HERE
Rare bol said:
I use wm6 and have used picsel before, but when I install the same cab now, I get an "initialization failure". Maybe its becvause I've done a hard reset a while ago.. does anyone know the solution, cause its a great browser!!
Click to expand...
Click to collapse
I had the same issue so I unistalled it, soft reset and re-installed it and wala it starts again!

Rare bol - HERE
Rare bol said:
I use wm6 and have used picsel before, but when I install the same cab now, I get an "initialization failure". Maybe its becvause I've done a hard reset a while ago.. does anyone know the solution, cause its a great browser!!
Click to expand...
Click to collapse
I had the same issue so I unistalled it, went into windows files under program files and deleted the picsel folder, soft reset and re-installed it and wala it starts again!

Hello!
What language is your device?
I had the same problem with a german device. The reason were some entries in th registry that where linked to some where in "program files" instead of "programme" as the folder is called in a german device. Corrected it manualy and everything is fine now.
JueLue

Finding an input method for Diamond

I am finding a Japanese keyboard for Diamond
My Rom is Chinese Traditional, dunno if it is HK Rom or TW Rom
Then I reached here: http://my.opera.com/cameron_en/blog/2008/02/03/ime-complete-installation-files-download-section
I tried following the instructions there but I cannot use henkan (変換) button, or even backspace.
My activated ChangJie input cannot be used as well.
The black bar (start menu bar) was on the top of the green screen which the texts "Windows Mobile 6.1" are there when I boot up my phone after the JP keyboard is installed, and the icons on the bar were not on there places. For example, the windows flag is in the middle.
I found they are not useful I uninstalled them all, the default input "ChangJie" can be used without problems, but the black-bar problem is not solved, I have to hard reset my phone.
Question: Now I haven't hard reset it yet, and want to know
1, How can I make the Japanese input works without any problems
2, Could anyone please let me know if there is another JP input for WM6 which works.
Thanks, and sorry for my Eng coz I am a Chinese.

Today I did a hardreset and reinstall IME without Chinese files, Korean files, enabler files and registry fix
All the problems were still here, until I uninstall the korechithai.cab, ChangJie started to work, but those JP IME input method has the following results:
Kana: Only Katakana can be type but cannot Henkan (変換)
Romaji: Only English and Numbers can be typed.
I only hope the two above works, Tegaki and Kensaku are about handwrite which I think is so inconvenience, although these two works quite fine.
I also tried Bagojs Input but all its input methods have to use handwrite.
Glad to hear if there is another Japanese input keyboard or make the Ask IME_31J works.
Thanks

hello!
i'm searching a cab to read japanese, but i can't find anything, have u any idea to do it?

Maybe inside the web the cab korechithai.cab meets you needs.
But I suggest you backup first because I dunno about this!~

Diamond Keyboard problem

Hi,
I don't know what I've done, but when I'd like to write some message, or whatever, the original keyboard (full qwerty, or compact qwerty) keyboard starts up with the symbol pad and it's not possible to switch it back to alphanumeric mode. The only way is to invoke keyboard switch menu and select the same keyboard again. then it works as usual. Does anybody have the same problem?
as I said, I don't know, what I've done, or installed, bud I think, I've installed Advanced config 3.0 recently

I have the same problem... I also don't know what is wrong.
I also tried to disabled T9 with some tricks... that's all...
Some suggestions??
Thnx

Since yesterday I also have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks

Same problem here on the CDMA Diamond, I tried two different ROMs already the Sprint Stock ROM and a Telus Custom Juicy's 2.0 ROM. I can't use it at all and I hate doing a Hard Reset. Someone shed some light on this please.

Same problem here, have tried everything

Well I solved the problem by uninstalling PCM Keyboard... Too bad, I really liked it
Does anybody know if it's possible to run pcm keyboard without having this issue on the diamond?

since day 1 my keyboard did not show predict text ? anyone can help me ?

I had the same problem , it appeared from nowhere ..
After also trying different tricks , i solved the problem using Resco Keyboard
Pro ... It also responds much better to my taste with the touch screen
interface of the diamond.

I have had this problem on the Touch Pro too having used PCM keyboard.
Unistalled it and all back to normal.
Pity.

Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...

chris2.0 said:
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
Click to expand...
Click to collapse
How do you use copy & paste with PCM? Which version of PCM keyboard are you using?

All SIP's go back to default SIP.

I've gone through multiple Roms, different versions of hyperdragon III, and different versions of PDAcorner. When I try to select a different keyboard, it loads for a second, then goes back to the default. The only keyboards that work are other defaults, such as Block Recognizer, Letter Recognizer, and Symbol Pad.
SOMETIMES PCM keyboard works, but NEVER has any of the diamond keyboards every worked.
I've even tried SIPchange, but the same thing happens. I assume the same has happened to you guys too? did you ever fix it?
thanks!

Is it just me?
How many of you use the Diamond Keyboard, or keyboard other than the default?

default IM
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.

Ramey said:
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Click to expand...
Click to collapse
The default cab is the ticket...it works when everything else fails. I don't even bother with the other stuff now. If the sip won't stick, I just install that cab and select it. A soft reset later and you are good to go.

Ramey said:
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Click to expand...
Click to collapse
I'm not sure what you mean by default im cab for wm5... lol

mikeeey said:
I'm not sure what you mean by default im cab for wm5... lol
Click to expand...
Click to collapse
I have attached attached it below. Also there are other keyboards that work better than the diamond ones...raphael and opal work much better. Do a search for their cabs...

parleyp said:
I have attached attached it below. Also there are other keyboards that work better than the diamond ones...raphael and opal work much better. Do a search for their cabs...
Click to expand...
Click to collapse
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
I cant seem to find the raphael and opal keyboard.. but I'm going to keep ssearching lol.. i dont wanna sound like a complete noob!
edit:
sipchange and imSelector did nothing... the only reason I fixed PCMkeyboard was cause uninstalled the old and re installed it.. as far sa the raphael and opal keyboard.. i downloaded something, but im not sure if it was it, so.. could someone kindly link me to the 2 keyboards? lol
thanks.
edit: (5 seconds later)
PCMkeyboard just quit working again, and imSelector and sipchange doenst fix it.
So instead i must ask... what roms are you guys using that support SIPS?

default im selector instructions
mikeeey said:
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
.
edit:
sipchange and imSelector did nothing... could someone kindly link me to the 2 keyboards? lol
thanks.
.
edit: (5 seconds later)
PCMkeyboard just quit working again...
Click to expand...
Click to collapse
1. install the default im wm5 cab above
2. install the opal keyboard you want
3. start > programs > im selector > opal keyboard
4. start > settings > personal > input > opal keyboard
5. soft reset
-----
you may need 2 soft reset twice before it cooperates. if you have your phone password protected, the default keyboard you selected will never show until AFTER you enter the password.
only RARELY do i get a glitch now, and a reset usually fixes the problem.
let us know!

mikeeey said:
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
I cant seem to find the raphael and opal keyboard.. but I'm going to keep ssearching lol.. i dont wanna sound like a complete noob!
edit:
sipchange and imSelector did nothing... the only reason I fixed PCMkeyboard was cause uninstalled the old and re installed it.. as far sa the raphael and opal keyboard.. i downloaded something, but im not sure if it was it, so.. could someone kindly link me to the 2 keyboards? lol
thanks.
edit: (5 seconds later)
PCMkeyboard just quit working again, and imSelector and sipchange doenst fix it.
So instead i must ask... what roms are you guys using that support SIPS?
Click to expand...
Click to collapse
I am in the same boat as you and the only keyboard that I have gotten to work is resco keyboard.....I have same exact problems as you...did you ask SJ about it....

SJ's opal keyboard
im having problems attaching files, but SJ's keyboards can be found here.
apply the default im instructions and a couple of soft resets later, you should be good 2 go.

I played with a Samsung Omnia yesterday, I really liked the keyboard SIP, is it possible to download and get to work on our kaiser's.

not sure...