Hi All,
I have not been able to unlock my Cingular 8125... to upgrade the thing to WM6.
Yip ran the lockwiz a few times... it did give me some write error though.
...
CopyFileToTFFS(unlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072746
Your phone is now unlocked...
My phone is a G3. I can use different sims. But I cannot CID unlock? I have used lokiwiz and awizard... what else can I do to CID unlock?
I am currently downloading your rom.I have not tried any roms as I am quite new to this. I have flashed my 8125 to - IPL1.01 SPL 3.08 gsm 01.12.10 os1.5.4.2.
I have also tried several time to downgrade to button... no joy, the spl wont go. I have upgraded to both ipl/spl3.08 and still cannot upgrade the rom.
Thanks,
SanMan
Did you read the sticky with the guide to an easy and safe unlocking by Dr. Puttingham? If you did then you should have read with more attention.
You've messed up your phone's bootloader. It's not supposed to have such different values. If you didn't unlock it before moving to SPL 3.08 you won't be doing it now as it must be 1.xx for lokiwiz and other tools to work.
Go READ threads of others in same situation as you and be sure to have a FULL battery before starting the flashing process.
great thanks for that... so since my spl and ipl are not the same I need to try to downgrade my spl to the same version of button?
Bud I have read and read and read... and now I have only posted. I see that people in my predicament look for a rom called 1.18 from cingular and apparantly that fixes the problem so I can downgrade and re-run my cid unlock. I will read through all of Dr Putting threads where I have also posted to try to resolve this. Thanks for you constructive assistance.
Kind regards,
SanMan
We were all at this point in our lives sometime.
Need rom for downgrade
hi SandfordE,
Could you please send me the link or the file that downgrade the rom to 1.xx. i have tried to looking for so much time but sill can't not. all link is dead.
please, thank you for your help
the blind leading the blind.
well the only one I have been able to get is this one, from Dr putting
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
I cannot find the 1.xx cingular rom which apparantly you need if you dont follow dr p, goodies properly.
Apparantly if you goto http://www.htcwizardweb.net/node/161 and register there is a pathetically slow download link for 1.8x... which should be able to change the ipl and spl to the same thing.
hope this helps you. Please dont run or upgrade anything on ure phone till both the ipl and spl are 1.x that where I made my mistake.
Being a techie I guess thats our problem always wanting to upgrade with out rtfm.
hth
San
Thank SanFordE
Downloading, then downgrade to ipl/spl 1.xx, then cidunlock then uprade to ipl/spl 2.xx then update to wm6.
Am i correct??
thanks again for your help
hi magic
yip thats exactly what I am doing, hopefully it will work, please could you post ure results. Pity bandwidth here in South Africa is so terrible else i would be able to download at home.
Thanks man,
Sanford
hi SanfordE,
why my ipl is 1.xx but the spl still 2.xx after flash sucessfully??
Thanks
Hi,
This worked for me, now i just need to flash the ipl/spl 2.xx then ready for wm6
Thanks
Maybe try to flash with button from dr p sticky... but remember before you can do anything else the like run lokiwiz, the ipl and spl need to be 1.xx
hope this helps.
s
SanfordE said:
Maybe try to flash with button from dr p sticky... but remember before you can do anything else the like run lokiwiz, the ipl and spl need to be 1.xx
hope this helps.
s
Click to expand...
Click to collapse
wow, i'm impressed . You passed from asking for tutoring to giving good tips in no time. well done m8 . All you need now is to manage the successful downgrade.
Are you sure your phone is still locked? Check CID status with mtty.
Thanks for that tip
Got already will try this procedure again tonight... hopefully it works.
hi SanFordE,
now i'm on wm6. thank a lot for your support
Hi MagicEr,
How many times did you have to flash with 1.8.11
I have tried twice already and my spl is still 3.08...
Maybe downgrade to Wizard_Love 2.26? The rey the other way?
Any input is kewl...
no worries S
WM6 is lovely...
All fixed on WM6
Note to all good people, once you have flashed with 1.8.11 <-- this is only on a cingular 8125, even though the spl is 3.08, you can run your lokiwiz to CID unlock and then flash.
Many thanks to all the developers and contributors to this forum.
Sanford
SanfordE said:
All fixed on WM6
Note to all good people, once you have flashed with 1.8.11 <-- this is only on a cingular 8125, even though the spl is 3.08, you can run your lokiwiz to CID unlock and then flash.
Many thanks to all the developers and contributors to this forum.
Sanford
Click to expand...
Click to collapse
hmm not sure if the SPL is really 3.08 although it shows that.
The CID block protection is applied by SPL so if lokiwiz worked it means that the SPL did downgrade
Glad you fixed it though.
cheers
i tried to update my wm5 to wm6 rc1 to my wiza200 (t mobile)
i followed all instructions as in Rc1 thread but this is what happened
my phone unlocked
cid unlocked
i upgrade the IPL/SPL to 3.08 both
but when try to install wm6 rc1 or any other wm6 it still give me the erorr 302
i tried to downgrade to IPL/SPL 2.26 but i failed all the times
please help me i lost every thing
please hellllp me i want either to install the WM6 or go back to tmobile wm5
note the only os can be installed on is WM6 ANTC V2.0 but it shows wm5 on my ppc i really confused here please help
thanks in advance
blue
FIRST-- Please do not make repeated posts, you posted this same damned thread in the Wizard/Wizard section and again in the Wizard/Wizard upgrading section. It is New Years Eve, people are out partying rather than sitting on xda, if someone comes online and can answer they will.
SECONDLY-- the big font is rather annoying (see what I mean, by my post here)
Finally-- good luck. BTW, if you flash back to a stock rom then make sure you have followed all the unlocking steps EXACTLY, you should be able to flash any rom after the stock rom. And while I am not sure, but if you were able to flash a custom rom, then it is WM6, even if it reads WM5 somewhere.
PS- I believe error 302 has something to do with unlocking the phone...you may not be unlocked. You need to be CID unocked. Read the unlocking sticky carefully and after reflashing a stock rom, make certain you have cid unlocked your phone (as I stated above)...get into the bootloader mode and make sure you use a STOCK rom.
Your phone isn't completely unlocked, go to the unlocking sticky thread and read on how to unlock your phone there. Also, please don't make giant text sizes, that shows impatience and it's just plain rude.
i am trying to upgrade my wizard. i followed the instruction in the wiki section. i am at the step of cid unlock my phone. however, after i did the cid-unlock the IPL stays on 1.01 instead of 1.05 which is described by the tutorial.
what did i do wrong? btw i have a g3
No, you didn't do anything wrong
The ROM is Button's 1.05 ROM, which provide IPL and SPL 1.01.
Just unlock, upgrade IPL/SPL, then flash a WM6 ROM.
thanks, got the lastest TNT rom to run
hi, i am downgrading my wizard for days now. i followed the guided by dr puttingham. but my SPL won't downgrade. i used the button ROM & even the wizard_love ROM for several times now. my IPL is now 1.01 but my SPL is still 3.08. my wizard is a G3
anyone pls help
thank you for your Assistance
Flash 2 Times in a Row the button Rom 1.05 and you'll get both ipl and spl 1.05.
Anyway (Since It is understood you are in the process Cid unlocking) if your IPL is 1.05 try the LokiWiz.
I Cid Unlocked having IPL 1.05 Spl 2.25.
Aldo
I thought it was
Flash 1.05; CID/SIM unlock; Flash 1.05; CID/SIM unlock again.
It's been so long
thanks for your reply. but i did both the cid unlocking using lokiwiz and tried lashing the ROM twice and it still doesn't work
there must be something you missed in the directions.
Youa have to run the lockwiz aplication twice also. one for sim one for cid. usualy when I have that type of problem it is starring me in the face and i cant see it. I recomend stepping away from it for a bit.
downgrade and unlock ipl/spl 2.16
hi,
got a g3 wizard from imate - imate k-jam. have been reading up on the various posts on flashing g3 devices.
on one of the posts thru wiki:http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
i saw this "With your device connected to your computer as Guest, run the file that your downloaded. It's pretty much self-explanatory. Agree to everything, and let it do it's thing. It is downgrading your IPL to 1.05. You can only unlock your phone if the IPL is 1.xx, you can't do it if your IPL is 2.xx."
my worry is that my ipl is 2.xx
can i proceed with this? is there anyone who has successfully been able to do those steps on a device with 2.xx ?
Please advice.
Try This
I was having the same problem using button 1.05.Try using this rom The Xda_MiniS_LaunchROM_v154102.exe. Find it in the tutorial and download.Then follow the instructions.
hi everyone
my friend have a unlocked wizard and i read here and folow the steps : http://forum.xda-developers.com/showthread.php?t=310831
everything was fine i finish the phone was ok
then i download a coocked rom, installed and this was the end when i started the phone he frezes. I try everything what i found here except the IMEI thing.
And now i can install any rom but cant use the device.
When i install the Button's 1.05 ROM the IPL/SPL is 1.01, T-Mobile 2.26 ROM the IPL/SPL is 2.26
somebody tell me what can i do
ps im shure that i read every thread but if i miss some please tell