hi everyone
my friend have a unlocked wizard and i read here and folow the steps : http://forum.xda-developers.com/showthread.php?t=310831
everything was fine i finish the phone was ok
then i download a coocked rom, installed and this was the end when i started the phone he frezes. I try everything what i found here except the IMEI thing.
And now i can install any rom but cant use the device.
When i install the Button's 1.05 ROM the IPL/SPL is 1.01, T-Mobile 2.26 ROM the IPL/SPL is 2.26
somebody tell me what can i do
ps im shure that i read every thread but if i miss some please tell
Related
so i upgraded to t mobile 2.26 and it worked fine..then i tried to flash the underground wm6 and it stalled out at 96 percent and errored...now im stuck at the boot screen with IPL 2.25 and spl 2.25 ....when i try to run the RUU it give me error: 260 or 274 connection or update error...
i dont know what else to do...anybody have any suggestions? please help!
Please read through the Wiki before posting.
Direct link: http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard#upgradings
There are several suggestions there on reviving a possibly bricked phone.
i did try that already to no avail...currently i am trying to use the shelltool to flash it..it picks up this info: version 2.26.10.2 device wizard lang. WWE brand HTC ...CID n/a ROM...N/a...says this should take more then 15 min..ill update on the progress....i really hope this works:-(
stolli said:
i did try that already to no avail...currently i am trying to use the shelltool to flash it..it picks up this info: version 2.26.10.2 device wizard lang. WWE brand HTC ...CID n/a ROM...N/a...says this should take more then 15 min..ill update on the progress....i really hope this works:-(
Click to expand...
Click to collapse
Follow this:
http://forum.xda-developers.com/showthread.php?t=298613
BTW:It really helps if you tell us what IPL, SPL, OS versions you are on (those numbers that show up when you reboot). Also what type of phone you have (G3 or G4).
im sorry...it says 2.25 for both...however on the shelltool it says 2.26 so i dont even know anymore..
i did follow that tut....the problem is..i cant seem to flash from the bootloader screen...the RUU wont flash to my phone..it gives me an error when its checking phone info...o and its a G3 phone..(to the best of my knowladge)..when i started my rom was 2.25.11.1
stolli said:
im sorry...it says 2.25 for both...however on the shelltool it says 2.26 so i dont even know anymore..
i did follow that tut....the problem is..i cant seem to flash from the bootloader screen...the RUU wont flash to my phone..it gives me an error when its checking phone info...o and its a G3 phone..(to the best of my knowladge)..when i started my rom was 2.25.11.1
Click to expand...
Click to collapse
Why are you doing shell tool with a G3 (I've seen where some G3's have been bricked with shell tool is used on them)? Did you try to flash the Wizard Love ROM? That seems to help in a lot of situations.
So again, more info helps. What is the exact error you are getting. And what rom are you trying to install? Is your phone CID Unlocked? May be worth trying to go back down to the Button Rom and doing the CID Unlock again.
PROBLEM SOLVED!
i dont know what was wrong..really..i just restarted my comp...and downgraded to a stock rom..and it worked fine!
man you have no idea how much i was freakin out..
thanks for all your help! i really appriate it!
time to try again
hello.
i had problem with wizard. i tried to upgrade rom, but i cant. it stuck on 99% and gives an error. i think it had cidlock, but i cant unlock it from bootloader.
Please help...
Piechcio said:
hello.
i had problem with wizard. i tried to upgrade rom, but i cant. it stuck on 99% and gives an error. i think it had cidlock, but i cant unlock it from bootloader.
Please help...
Click to expand...
Click to collapse
Download official stock rom of your carrier and flash it in bootloaders to recover back to its default working status,then if its a G3 phone, downgrade to ipl/spl 1.xx by flashing Button's Rom and SIM/CID unlock with lokiwiz02b,but if its a G4 ,it cannot be CID unlocked but can be upgraded to wm6 through 'SoftSPL' or 'HardSPL'.
HI
I have a same problem – I have a qtek 9100 G3
ipl-spl 2.17
GSM 02.07.10
OS 2.17.7.2
I can update my rom completely but after restart freeze on ipl-spl screen
And I can’t warm reset it says FORMAT PARTITION FAIL
I try to downgrade my rom but spl freeze on 2.17 – I try button rom and Xda_MiniS_LaunchROM_v154102
I can’t find any official qtek rom for test
And I also try R2SD all with romupdate115 it not work
help please
jalalkarimi said:
HI
I have a same problem – I have a qtek 9100 G3
ipl-spl 2.17
GSM 02.07.10
OS 2.17.7.2
I can update my rom completely but after restart freeze on ipl-spl screen
And I can’t warm reset it says FORMAT PARTITION FAIL
I try to downgrade my rom but spl freeze on 2.17 – I try button rom and Xda_MiniS_LaunchROM_v154102
I can’t find any official qtek rom for test
And I also try R2SD all with romupdate115 it not work
help please
Click to expand...
Click to collapse
You got to have a CID unlocked phone to upgrade to any wm6 Rom.Sometimes SPL do get stuck up at 2.xx while downgrading with Button's Rom,it takes a couple of tries to get it downgraded to 1.xx.Flash the button's rom a few times more till it gets downgraded.You can only CID unlock your phone,if it has IPL/SPL 1.xx.
Download the official stock Qtek Rom from this link:-
http://forum.xda-developers.com/showthread.php?t=342744
zabardast_1 said:
You got to have a CID unlocked phone to upgrade to any wm6 Rom.Sometimes SPL do get stuck up at 2.xx while downgrading with Button's Rom,it takes a couple of tries to get it downgraded to 1.xx.Flash the button's rom a few times more till it gets downgraded.You can only CID unlock your phone,if it has IPL/SPL 1.xx.
Download the official stock Qtek Rom from this link:-
http://forum.xda-developers.com/showthread.php?t=342744
Click to expand...
Click to collapse
Don't use those ROMs as they are for G4!!!
If flashing original ROM doesn't solve the case then you'll have to buy the unlock program from IMEI-check company.
Many thanks
Can you give me some advice what is the best version for qtek 9100 I can’t find any original qtek rom please give me a link
And if I buy IMEI Program after apply that my device starts normally?
I don’t want WM6 only back to normal
And serious problem is
I have FORMAT FAT FAIL for warm reset. In this case its possible hardware (disk on chip) has a hardware problem?
Thank you all
jalalkarimi said:
Many thanks
Can you give me some advice what is the best version for qtek 9100 I can’t find any original qtek rom please give me a link
And if I buy IMEI Program after apply that my device starts normally?
I don’t want WM6 only back to normal
And serious problem is
I have FORMAT FAT FAIL for warm reset. In this case its possible hardware (disk on chip) has a hardware problem?
Thank you all
Click to expand...
Click to collapse
No. the problem is simply of messed up firmware. I believe that the SPL tries to load the OS but it must be at a different address and never starts to load.
The IMEI-check tool will simply CID unlock your device. You still have to do the "r2sd all" procedure...
good luck
ok guys i f***** up my mda gets stuck at second splash screen the one that tells you ipl/spl and stuff
i was flashing a new rom using a prog called shelltool which i got from here as my device isnt cid unlocked i was using this rom
http://forum.xda-developers.com/showthread.php?t=403096
dunno whats happened but now its stuck and cant seem to get it sorted here are some details
ipl 3.08
spl 3.08
gsm 02.69.11
os 2.18.0.0
i have tried using a rom update utility but doesnt work, please help
You can always flash back to your MDA stock ROM.
After flashing back, flash to Button's ROM to downgrade your IPL and SPL and unlock your CID. However due to your IPL and SPL is at 3.08, there is a possibility that you can downgrade IPL to 1.01, however SPL stays at 3.08. In that case, try unlock CID using Wizard Service Tool (Actually you can also use WST if both IPL and SPL version are 1.01).
Note: Never use ShellTool ever. There are methods now that use RUU to flash your favorite ROM, both for G3 and G4. You should use those methods instead.
the same thing happened to me when I was very hesitant on cid unlocking my 838 . I use shelltool in flashing and was successful but when i decided to give another shot on a different cooked rom, it certainly did its job on flashing but never got pass on the IPL SPL screen.
then I follow Dr. P's guide (CID unlocking) then I successfully resurrected my 838 and now I can flash whatever cooked rom I want (given that it is for a G3 device)
btw, after flashing my 838 with the buttons rom, I use WST instead of lokiwiz
HTHs
thanks
thanks for your help guys got it sorted and cid unlocked now
just need a really good rom now
and the hunting begins
good to hear that try to look for a rom that will suit your needs. There is a lot of good roms here, just try to search what best fit you.
like I did, i have flashed at least 5 different roms in just a months time
hello to all,
i have updated may wizard to wm6.1 (WM 6.1 German Build 20273), but my wlan doesnt´t work and i think it is because i didn´t upgrade ipl/spl from 1.01 to .
i followed this guide "The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards" but i didn´t play wm5 on it.
following steps i didn´t do:
17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM
This will give you a strong 2.26 IPL and SPL to work with.
Now you SHOULD have a IPL and SPL of 2.26 to work with. If not, you screwed up! Don't attempt to install someone's hard work and ***** before you do these steps!
EDIT for Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me
After every update-try my xp-computer showed me: Error 260
i tried to go back to wm 5, but doesn´t work too.
it would be nice, if someone could help me.
lg
dietmar
i´m austrian and my english isn´t very well, so excuse my mistakes
hello to all,
i have updated may wizard to wm6.1 (WM 6.1 German Build 20273), but my wlan doesnt´t work and i think it is because i didn´t upgrade ipl/spl from 1.01 to .
i followed this guide "The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards" but i didn´t play wm5 on it.
following steps i didn´t do:
17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM
This will give you a strong 2.26 IPL and SPL to work with.
Now you SHOULD have a IPL and SPL of 2.26 to work with. If not, you screwed up! Don't attempt to install someone's hard work and ***** before you do these steps!
EDIT for Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me
After every update-try my xp-computer showed me: Error 260
i tried to go back to wm 5, but doesn´t work too.
it would be nice, if someone could help me.
lg
dietmar
i´m austrian and my english isn´t very well, so excuse my mistakes