WM5 Update problem - MDA III, XDA III, PDA2k, 9090 Software Upgrading

i tried update the xda IIs CHT 1.40.06 EXTROM 1.40.902 Radio 1.12.00...
it's halted on '15% on updating extended rom', why?
how i solve it?

try to repeat the procedure, but first read about WM5 upgrading in WIKI

Related

PLEASE HELP!!! i need help upgrade to the New Radio 1.13.00

Please i need help to upgrade to the new radio rom. i have a siemens sx66 from cingular. i tried to upgrade it but i always get an error.
Hi aih1977,
Please read the wiki. Cheers ^^
Hi khngaroo
i did but i still get an error
Same issue here
Hi guys,
Actually, I have the same issue. As far as I could see, the Wiki doesn't address the "123: Radio file checksum error" that I receive when following the directions. I follow the directions for using the downloads which doesn't go, then I use the files from the Siemens SX66 Upgrade as suggested.
Any thoughts? Thanks.
ever thought about reading the other threads ?
http://forum.xda-developers.com/viewtopic.php?t=23814
Hum
Lets see the wiki 1.40 upgrade is in the first place a TPYE II upgrade.
Now if you spend sometime and READ the page you will see that there are 2 ways of doing a 1.40 upgrade. One is the whole rom in its type II format the other is just the CE and the radio Type I.
How ever if you don't read the page and think you are got it all worked out then you use the fast option, thats the MA_noID tool (Type II), then download the radio 1.13 which Is a type I but who cares about that any way....then you run the bugger and get a checksum error what the hell have I done now error.
Please correct me if I am wrong so that I can correct the wiki page.
MDAIIIUser,
Yes, I have thought about reading the other threads. What was not obvious to me was that I need to upgrade to the 1.40 ROM to be able to upgrade to the 1.13 Radio. Forgive me if I missed this.
Thanks for pointing this out. I'll start over and review all the 1.40 ROM threads.
lungbutter
You dont need to upgrade to CE 1.40 for the radio 1.13.
Just go to wiki and follow the radio upgrade page. It worked for me and many others.
Now if you want to upgrade to 1.40 then do that also on the wiki page, this will however give you the radio 1.12. (unless you read the whole of the page and understand the getting started section of wiki as in how to use fix.bat)
i tried everything can someone set up the files and link it so i can download it. i think im doing something wrong.
Can you click on the link in my signature?
Arg! Lost my post twice.
Anyhow, MDAIIIUser,
Ok. So the 1.40 ROM is not needed. That was my initial impression. I thought you were referring to reading the 1.40 ROM threads.
I also saw that many users were able to upgrade with no problems. That's why I was suprised when I received the checksum error after reading the 1.13 Radio threads and exactly following the Wiki several times before I gave up. I must have missed something because it seemed like the Wiki steps should've worked no problem.
I haven't found anyone posting that has upgraded the radio on a Siemens SX66 yet. I'm wondering if it's Siemens-related which is why I jumped on aih1977's thread (sorry ).
I'll start over and review the threads and directions, etc.
Thanks for your reponses.
lb
so you are saying that
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
does not work for you as you have a SX66.
This could be due to the fact that your device has no camera and the header of the rom is for a camera.
I have never read about having to fix the header for a radio upgrade, its a first for me but I can learn.
Please confirm
1) By following the link above I get an error
2) the error I get is the following
3) My rom at the moment is.
The new Radio ROM does work on a SX66 if you folloe the directions. If you have an issue use the upgrade files that you used to upgrade 1.40. Your going to get an error the 1st go around but then it will run smoothly the 2nd try.
MDA,
I'm running 1.13.00 radio on my SX66...
-Chris
Dear MDAIIIUser,
Correct me if I am wrong. All this while, from what I've read through the forum, my understanding is that MA_NoID can only be used to upgrade type II ROMs. If so, I must confess that I've upgraded my radio to 1.13 (type I) with MA_NoID... And it worked... Any clue?
Cheers ^^
Ok i just want someone to help me with upgrading the radio and if someone out there upgraded the radio please link it or pm me with the files that you used to do it.
Thank you.
MDAIIIUser,
Okay, I was able to get the radio stack upgraded to 1.12. Here's what I did. I'm sure it's pretty ugly and probably not the easiest way but:
Followed the Wiki again with errors as follows:
After step 7, running BaUpgradeUt I received the "Error 100: Model ID Error".
After step 5 of the second set of instructions, I received: "Error 123: Radio Image File Checksum Error". No joy.
So I then took the iMate 1.40 ROM image and extracted the files, deleted the ms_.nbf and nb_.nbf and ran MaUpgradeUt_noID.exe. It errored with Error 120: Country ID Error. The phone was still in USB mode so I reran MaUpgradeUt_noID.exe again and it successfully updated the Radio to 1.12. I tested the phone calling my voicemal with no problems.
I then replaced version 1.12 with the 1.13 version. I ran BaUpgradeUt.exe and recieved the "Error 123: Radio Image File Checksum Error" (this is using the files from the 1.40 ROM with the 1.13 radio file). I then tried running MaUpgradeUt_noID.exe again. The device software update utility showed no information in the from or to sections of the dialog box. It doesn't throw the phone into USB mode and after a minute or so it offers congratulations thinking it upgraded the phone.
I then went back to the 1.13 Radio files I downloaded and ran MaUpgradeUt_noID.exe. I received the Error 100: Model ID Error".
I reran MaUpgradeUt_noID.exe and received an error that it coundn;t find the ruu.conf file so I renamed the htcruu.conf and htcruu.dll ruu.conf and ruu.dll. I reran it and it would attempt to update the radio, then timeout. I received a communications error (which I didn't record) then tried to soft reset the phone. It was stuck in USB or Serial mode. Cold boot no worky either.
I then reflashed back to 1.12 successfully. I will try to update to 1.13 later tonight or tomorrow.
Here is my phone info. before the update:
Siemens SX66 Cingular
Model No: PH20B1
ROM Date: 01/21/05
Radio Version: 1.02.10
Protocol Version: 1337.35
Ext. ROM Version: 1.33.110 WWE
Thanks for the responses. I'm sure that there's an easier way but I'm happy to be at least 1.12.
lb
Edited: Type on filenames.
God are we having fun.
And Boy am I lost.
This is what I can work out.
You flashed the i-mate rom 1.40 radio 1.12 got errors and re ran it it was fine. Thus you have a 1.40 with radio 1.12
Now you are stuck. you want to flash the radio 1.13 (Type I) using the wiki info and you get error that tells me that you have the wrong device. The file is for a device with a camera you dont have that.
You try the MA_tool which wont work as its for type 2 and gives you a checksum and your stuffed again.
You seem to be the first person that has come up agaisnt this thus we need to upddate wiki with new info.
I have a problem with this as the 1.12 was a type II to Type I convert that I made, nobody had a problem with that before.
So as I asked you to confirm what you have and you have not done that I will ask again.
Please confirm
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
1) By following the link above I get an error
2) the error I get is the following
3) My rom at the moment is.
OK i did everything i just want the files that someone used to successful upgraded there siemens sx66 from cingular to the new radio 1.13 rom. so i can upgrade my siemens sx66.
SO PLLEASE CAN SOMEONE HELP!!!
MDAIIIUser said:
So as I asked you to confirm what you have and you have not done that I will ask again.
Please confirm
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
1) By following the link above I get an error
2) the error I get is the following
3) My rom at the moment is.
Click to expand...
Click to collapse
MDAIIIUser,
Sorry for the confusing post. I wanted to provide some detail. Answers are as follows:
1) Yes.
2) ..."Followed the Wiki again with errors as follows:
After step 7, running BaUpgradeUt I received the "Error 100: Model ID Error". After step 5 of the second set of instructions, I received: "Error 123: Radio Image File Checksum Error".
3) Siemens SX66 Cingular
Model No: PH20B1
ROM version: 1.33.10 WWE
ROM date: 01/21/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version: 1.33.110 WWE
I believe that I don't actually have the 1.40 ROM. From the directory in whcih I decompressed the iMate 1.40 ROM (PDA2k_WWE_14000_176_11200.exe) I removed the ms_nbf and nb_.nbf files and left the radio_.nbf file, which I believe will only flash the radio, then updated.
Is that less confusing?
Thanks,
lb
aih1977,
We are actually trying to determine what the issue may be to update your radio on the SX66. Hang in there!

wwe cab failed install on TuMa

Hi,
I have been having real problems with my phone( ihave mentioned it in the TuMa discussion) after upgrading to Wizard V2a and TuMa(currently running) so i thought that upgrading my radio rom might clean things up for me.
So I downloaded ba_radio_1.15_in_v1_format.rar from the ftp and foolwed the instructions for upgrading the radio rom on the wiki. Everythign went fine until after i did a hard reset.
The Missing-Files.CAB was automatically installed but it failed to install the JMM101257_WWE.cab and installed the camera2k5.cab ok aswell.
Anyone any ideas why WWE cab should failed.
Thanks
satpal

Help Needed PDA2k

I upgraded my Imate PDA2k to WM5 and started noticing some like messaging screen always showing and when you minimize it keeps coming and also keyboard not working properly.
I have downloaded the new Helmi rom and tried to downgrade to wm2003 but it wouldnt.Please can anyone out the help me out.
Thanks
Wiki has downgrade instructions, did you follow them?

Upgrading Radio on Serial?

Hi!
I am trying to upgrade the radio version on my SX66 to 1.15.00. I am doing this using the Type I method where there are only three steps and you just have to download the "Radio" part of the upgrade. However, I keep on consistently getting the Connection Error? I don't have Serial in my laptop. I do have the latest Helmi WM5.0 running. Do I have to use Serial to upgrade?
Never mind, fixed the problem by installing the OEM WM2003SE official ROM and then upgrading my Radio ROM and then upgrading back to Helmi WM5 1.4 ROM.
Thanks for posting this info. I've been pulling my hair out for days with this and just came across your post during my hundredth search.

New Radio Rom on WM5

ok, here is the deal.
I flashed the WM5 to my device (Blue angel-qtek 9090), works great !!
standard the radio rom is 1.13.00
a newer is avail. namely 1.15.00
but (as operah says...)
i'm unable to flash the radio rom to my device, yes i checked the forum and read all the BA items....
any suggestions.
greets
ger (the Netherlands)
Go back to WM2003
You can also use the original Provider Package(here you can replace the RadioRom File).
Try to flash the Radio and then revert to WM5 again.
For me it worked.
Last time I had WM5 onmy device I flashed an new radio to see if it worked (was a VERY long time ago).
Have you followed the wiki Radio 1.15 page ?
Thanks for the info!
downgrading to 2k3, updating the radio to 1.15.00.
after that upgraded to 2k5 again.
thanks
by the way what do you mean by ... VERY long time ago....
gr,
ger
Checked wiki and based on my own updates I come up with November 2005.

Categories

Resources