I tried to use the tool provided here to unlock my SPV M3000 and I got an information in the screen saying:
Data Crashes.
Please contact your service center.
Can anyone help?
Thanks
You phone is relatively dead.
I remember someone solved the problem with $$ at http://www.imei-check.co.uk/
Try your luck there.
Related
Hi everyone i am trying to upgrade my MDAIII UK, to a imate ROM or O2 Rom but i get county ID error, i tried a fix, but it then says that files are corrupt, i have tried everything that i could find on the site but no luck, could some1 please help me thank you
Hi,
Please read wiki and use the first method here -> http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Thank you m8, i will try it 2nite
Hello
I have an XDAII1 PH10C
Ive had a few issues with TomTom etc and have downloaded an update or two - including the official O2 update.
Unfortunately me XDA keeps freezing and Im getting pretty upset with having paid £400 for nothing.
When I did the O2 upgrage I got the following :-
The file "rofs_target.zip" was not copied sucesfully. To re-install, you will need to get the source .cab file again. Continue with Setup?
Ive even let both batteries run down completely in the hope of restoring original O2 set-up - but I get a Country Error code when I re-install the upgrade.
My hardware settings are :
ROM 1.11.00 WWE
Date 01/27/05
Radio 1.04.00
Protocol 1337.42
ExtROM [this is blank]
Ive got the chance of returning to O2 support to try and sort problem, but I need original O2 set-up or they will charge me £96+vat for re-setting XDA.
PLEASE - does anyone have solution for solving [blank] ExtROM issue or the original O2 settings to solve the repair bill problem.
Thanks
Paul
what types of sd card are you using
sometimes i get that error as well but all i have to do is re run the no id app and it works 2nd time
I have a PQ1 1GB card, but dont have that inserted when I download updates or reset PDA.
Paul
re-run the O2 update if it errors with country ID error then just start it back up again it should then work.
It looks from the specs you posted your using the latest 1.04 radio. i assume you installed PUGs new update version ?
Hi
Yes I tried Pugs version, and the ExtROM was still blank.
So, Ive gone back to an O2 version - and the ExtROM is still blank.
I need to reassure myself that I have ONLY O2 software on the XDA before I send it in for repair as it will be free - if they find any other stuff on there they will charge me c£100.
Paul
PS Im still having major TT5 issues. Today it froze and I had to hard reset and then tried to re-install TT5. Only to be told it was already there and did I wish to overite. When I said yes, the today screen came up and theres no sign of TT5 anywhere.
Bloody XDAIIi is doing my head in.
Have you downloaded the latest O2 ROM from the XDA2i mini site?
When you are installing it have you got your anti-virus software turned off?
Yep - O2 download.
Yep - AntiVirus, Internet Security & Anti-Spam all Off.
Ive just done the download again and still got the rofs_target.zip message.
Paul
Hi there, have you tried unlocking the extended rom by any chance? This will cause the storage to be locked and cause the extended rom to stop installing past a certain point (Happened to me). There are instructions on this site on how to unlock it, do a search for unlock and my screen name (pug).
Hope this works.
Pug
I found the link you refer to and downloaded the exttools.200.exe and ran it on XDA.
I then tried the official O2 update again and the XDA has FROZEN !!!!
It is now stuck on Serial v1.01 and WILL NOT alter no matter what I do.
Ive soft-reset, hard-reset and done the soft-off-action button thing - and nothing.
When I place in cradle, the PC plays a tune as if to say it knows the XDA has been connected, but I cannot get activesync to recognise the XDA.
Now what can I do please ?
Im particularly worried that I now cant remove the exttools.200.exe from the XDA and will have to return it for repair with that dodgy software on there - they will definately be charging me for a repair now.
What can anyone suggest please ?????
Paul
SOMEONE PLEASE HELP ME!
I tried to upgrade the firmware in a customers O2 XDA IIs via active sync with bluetooth and it just stopped.
i disconnected it and tried to reset it but all it shows on the unlit screen is "Serial v2.07". I'm in Africa no where near an o2 service centre and I cant afford to buy another XDA for the guy!
Pls tell me what i can do.
Also when istarted the upgrade proceure from the update file i downloaded from the o2 web site, it stopped when i clicked upgrade and it said "Getting phone information"
How can i get the phone out of this serial mode pls??
thanks to anybody that can rescue me!!!!!!!!!!!!!!11 :!: :!:
Have a read of wiki (link in my signature)
YOu are in boot loader (White screen) put the device back in the cradle and rerun the upgrade.
(Thread moved to the BA section from Upgrading...)
HELP Please i was doing an upgrade to wm6 on my SPV M5000 (o2 Exec) and it stoped at 99% and came up with error on the pc since then i cant get it to go to the bootloader bit so i can try again the spv dosent respond to any button just dead PLEASE HELP
nashpatel said:
HELP Please i was doing an upgrade to wm6 on my SPV M5000 (o2 Exec) and it stoped at 99% and came up with error on the pc since then i cant get it to go to the bootloader bit so i can try again the spv dosent respond to any button just dead PLEASE HELP
Click to expand...
Click to collapse
Two scenarios:
1- Flashed wrong IPL/SPL and now phone's dead with no solution possible
2- Problem with battery that can be solved by shorting the pads for which you must make a search for the procedures
Hello everyone,I appologize if the thread allready exists,but I don't really have much time for searching the forums.My problem is like so:I bought a used SPV M3000(orange brended),everything was good until someday the phone started to act really strange,working slow showing wierd messages,after restart it got stuck at the ipl/spl screen etc. so i looked on the web and found out that i need to reflash it.So far so good,downloaded the love rom flashed as instructed,phone restarted,went to screen alignment,and shut down.I did a secon reflash with the same rom,flash completed successfully but the phone did not start at all after that,no bootloader no nothing,tried hard reset,still no avail.So if someone can help me "unbrick" it,I would really apreciate.Best regards