dear members
i've just installed the gps-enabled dopod rom and whenever i try to switch the built in key board to an arabic enabled keyboard that comes with the arabizer program (sold separetly from 2 companies, imaginet & informobility) , it refuses to change.
i even istalled resco keyboard pro but with the same problem.
does anybody know how to solve this problem?
is there a hack or a change in the registry that enables me to use any arabic enabled keyboard?
thanks for your help.
vasa vasorum said:
dear members
i've just installed the gps-enabled dopod rom and whenever i try to switch the built in key board to an arabic enabled keyboard that comes with the arabizer program (sold separetly from 2 companies, imaginet & informobility) , it refuses to change.
i even istalled resco keyboard pro but with the same problem.
does anybody know how to solve this problem?
is there a hack or a change in the registry that enables me to use any arabic enabled keyboard?
thanks for your help.
Click to expand...
Click to collapse
I can't get RapidCalc keyboard to load either. Other people have complained about keyboard software not loading also. Hopefully a Rom upgrade will fix the issue.
dear matterhorn
thanks for your reply. hopefully there would be a solution for this problem.
waiting for the experts to reply.
please guys >>>>>>>>>>>> around 100 visits and only one reply
pleaseeeeeeeeeeee i need a help.
Have you tried to set the non-loading keyboard as default input method using SKTools or SIPChange?
It did the trick with HTC PhonePad which also refused to load.
Apoc said:
Have you tried to set the non-loading keyboard as default input method using SKTools or SIPChange?
It did the trick with HTC PhonePad which also refused to load.
Click to expand...
Click to collapse
I Tried the SKTools, and my Trinity started to freeze right after softreset, so I had to do a Hard-reset
Tried the SIPChange, and viollaaaaaaaaaah my arabic keyboard is working now.... I didn't even change the defaults, I just installed the SIPChange and everything is normal
Thanks
dear apoc & mo7al
thanks for your response. i tried sktools but i couldnt figure out how to do it.
i have never heared about sipchange. can you send me the program and how to set the keyboard, please
thanks for your response
vasa vasorum said:
dear apoc & mo7al
thanks for your response. i tried sktools but i couldnt figure out how to do it.
i have never heared about sipchange. can you send me the program and how to set the keyboard, please
thanks for your response
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=271008
thanks a lot. you are really ra3eeha
hi there
still having the same problem ...
sipchange didnt work with me
RESCO Keyboard PRO worked for me.
You need to set ARABIC as the Primary Language, softrest.
I also tried another method and it worked as well. I extracted all the files from the extended rom beofore upgrading the ROM and then reinstalled them after the upgrade. The extended ROM files I extracted already included the IMAGINET Arabization.
Try these methods and let us know the results.
ajram said:
RESCO Keyboard PRO worked for me.
You need to set ARABIC as the Primary Language, softrest.
I also tried another method and it worked as well. I extracted all the files from the extended rom beofore upgrading the ROM and then reinstalled them after the upgrade. The extended ROM files I extracted already included the IMAGINET Arabization.
Try these methods and let us know the results.
Click to expand...
Click to collapse
Put my unit did not have imaginet arabizer on it.
Can you upload this files?
dear ajram
thank you for your reply. we'll be gratefull if you can upload the imaginet files that are extracted from the arabic rom.
I am using vgakey now and it is working. but sometmes it refuses to appear.
waiting for you
Here you go!
Thanks for the files I will try and give you the result
Works perfect and the keyboard issue is solved (until now). Was there any other imaginet files (Like the Dictionary and prayer times). If yes please complete your kind effort and post them.
Thanks in advance
Glad it is working for all.
I think the 2 cab files PP_AKv30-DefaultPage_ALL.CAB and PP_AKv33-DefaultPage_ARA-0401.CAB are the ones that are making the difference.
With regards to the other maginet applications, they came on a seperate CD. I will try to upload them later if the size permitts.
Dear ajram
it worked perfictly
thanks a lot
ajram said:
Glad it is working for all.
I think the 2 cab files PP_AKv30-DefaultPage_ALL.CAB and PP_AKv33-DefaultPage_ARA-0401.CAB are the ones that are making the difference.
With regards to the other maginet applications, they came on a seperate CD. I will try to upload them later if the size permitts.
Click to expand...
Click to collapse
Appreciate your help - waiting for your kind upload
Note : Until now (72 hours) Not a single problem with keyboard switch - thanks to ajram
Thank you very much, Realy it worked.
I belive you need only the 3 arabizer files to solve the problem which are,
CAB: \Extended_ROM\INCert_B377_2.CAB
CAB: \Extended_ROM\ACERTTahoma_HTC_B377_2.CAB
CAB: \Extended_ROM\MultiLang_AR_HTC_B377_2.CAB
These files are working on my device having no problem so far.
Thanks again.
Related
Hello Everybody,
Please, I need help because the Resco Keyboard 5.01 will not working, I cannot fixed it. I use the Kaiser Diamond L26 V9 Rom Radio 1.58.25.17.
Please response.
Thanks in advance.
Greez Fred.
Fred Goossens said:
Hello Everybody,
Please, I need help because the Resco Keyboard 5.01 will not working, I cannot fixed it. I use the Kaiser Diamond L26 V9 Rom Radio 1.58.25.17.
Please response.
Thanks in advance.
Greez Fred.
Click to expand...
Click to collapse
How are you installing, a little more info?
The latest version is 5.11, try that, 5.01 is quite old...
bilbobrian said:
How are you installing, a little more info?
Click to expand...
Click to collapse
Hello Brian,
Thanks for your replay.
Installing:
1- I installed the trial version of the Pocketland(cab).
2- Start->Settings->Keyboard.
3- I choose the Resco Keyboard as default.
4- I let everything in the Resco Keyboard option default.
5- I did a soft reset.
6- I started words and activated the resco keyboard, the defauld is still active so the resco keyboard is not working?.
Greeze Fred.
Ps sorry my english that's not so good.
Please respons, my email: [email protected]
martythebrit said:
The latest version is 5.11, try that, 5.01 is quite old...
Click to expand...
Click to collapse
Hello Marty,
Thanks for your reply.
I also installed 5.1.1, the same problems.
Installing:
1- I installed the trial version of the Pocketland(cab).
2- Start->Settings->Keyboard.
3- I choose the Resco Keyboard as default.
4- I let everything in the Resco Keyboard option default.
5- I did a soft reset.
6- I started words and activated the resco keyboard, the defauld is still active so the resco keyboard is not working?.
Greeze Fred.
Ps sorry my english that's not so good.
Please respons, my email: [email protected]
here you go, try this it sounds like your keyboard is defaulting to the original one when you soft reset. mine did the same thing. do yourself a favor and really try to search alot of people will flame you on this kind of stuff.
hope this helps
bilbobrian said:
here you go, try this it sounds like your keyboard is defaulting to the original one when you soft reset. mine did the same thing. do yourself a favor and really try to search alot of people will flame you on this kind of stuff.
hope this helps
Click to expand...
Click to collapse
Brian,
The installation of the cab was unsuccesfull?
Gr.Fred
Fred Goossens said:
Brian,
The installation of the cab was unsuccesfull?
Gr.Fred
Click to expand...
Click to collapse
Brian,
The installation of the Sipchange.cab was unsuccessful?
The prvious version of Sleuth255's Sipchange cannot be removed.
Gr.Fred
did you go to programs sip changer and choose your default keyboard? did it actually say the installation was unsuccessful?
The installing was not successful, so I cannot go to the sipchange button to activate.
it worked for me, I would try doing a search for sip changer and try a different one, there are a few out there for kasiers. sorry i couldn't be of more help.
bilbobrian said:
did you go to programs sip changer and choose your default keyboard? did it actually say the installation was unsuccessful?
Click to expand...
Click to collapse
Brian,
The installation of the Sipchange.cab was unsuccessful, however the file was in the programs map?, so i choose the resco keyboard option and make a soft reset but notting change, the keyboard is still default?
bilbobrian said:
did you go to programs sip changer and choose your default keyboard? did it actually say the installation was unsuccessful?
Click to expand...
Click to collapse
Brian,
I don't understand the installation of the Sipchange.cab was not successful but the programe "sipchange" was in the programs map, so I choose the resco keyboard and soft reset, but nothing change te keyboard is still the default one.
Fred Goossens said:
Brian,
I don't understand the installation of the Sipchange.cab was not successful but the programe "sipchange" was in the programs map, so I choose the resco keyboard and soft reset, but nothing change te keyboard is still the default one.
Click to expand...
Click to collapse
when the keyboard opens there is an arrow to choose options, i assume that you are using that also?
bilbobrian said:
when the keyboard opens there is an arrow to choose options, i assume that you are using that also?
Click to expand...
Click to collapse
When I open the start->programs-> sipchange then I can choose the Resco keyboard and after that I click the button(dark) on the middle of the screen, I forgot the name to proceed, but that is not the option button like that one in the start->settings->keyboard program.So i think the Sipchange.cab was not for 100% installed.
try this one fred
i used this with pcm keyboard before. you might even try that keyboard, it is bigger and free, lots of skins
Does anybody know where I can find the .cab for Transcriber that came with WM6.1? I have been looking everywhere and I can only find the one for WM6.0 and it doesn't seem to work at all.
Anybody? Please?
Well, thanks to Abusalza for extracting it from his ROM and getting me the CAB file.
For anybody who needs it Here is the file.
I just installed this. However, whenever i try to use it(just select it from he list of available options) it does not come up, i just get the plane keyboard. Using Duty's 6.1 rom.
brynwall said:
Well, thanks to Abusalza for extracting it from his ROM and getting me the CAB file.
For anybody who needs it Here is the file.
Click to expand...
Click to collapse
WM6.1 has problem with Transcriber; you can add a software called PenReader. Do a Google search and you will find it. It does more than Transcriber as far hand writing recognition, even when in writing in MSWord.
yeah, but you have to pay for penreader - is there a free one? I started having the same issue installing transcriber.
brynwall said:
Does anybody know where I can find the .cab for Transcriber that came with WM6.1? I have been looking everywhere and I can only find the one for WM6.0 and it doesn't seem to work at all.
Click to expand...
Click to collapse
help you to up
Hello to everyone and thanks in advanced for your help ...
I would like to know how can I return to the Windows Mobile Old keyboard ... the one that has handwriting posibility .... I try several roms ... and I like them but I don't like the HTC new keyword ... I really prefer the old version because I think is fast for me writing than tiping ...
Actually I'm using Itje's Touch-IT v16 with winmo 6.1
Thaks a lot ....
The Maxx
This transcriber cab might work for you.
edit: If that doesn't work, or if you'd just like the entire OEM keyboard, here you go.
thanks ... but both cabs don't work or maybe I don't know how it work.
sfreirez said:
Hello to everyone and thanks in advanced for your help ...
I would like to know how can I return to the Windows Mobile Old keyboard ... the one that has handwriting posibility .... I try several roms ... and I like them but I don't like the HTC new keyword ... I really prefer the old version because I think is fast for me writing than tiping ...
Actually I'm using Itje's Touch-IT v16 with winmo 6.1
Thaks a lot ....
The Maxx
Click to expand...
Click to collapse
Look for Calligrapher from phatware. It's the advanced version from the built in one.
jackleung said:
Look for Calligrapher from phatware. It's the advanced version from the built in one.
Click to expand...
Click to collapse
Thanks I looking for it rigth now .... anyway Is possible disable the input way that the manila's rom has? maybe by regedit and return to the windows mobile original?
I just donwloaded the .cab file, but I think is not what I'm looking for ... I'm want to disable the HTC input method and use the old that came with windows mobile the one that has block recognizer, keyboard, letter recognizer and simbol pad. Please if some one knows how can I do that it will be very helpfull for me.
BR
The Maxx
sfreirez said:
I just donwloaded the .cab file, but I think is not what I'm looking for ... I'm want to disable the HTC input method and use the old that came with windows mobile the one that has block recognizer, keyboard, letter recognizer and simbol pad. Please if some one knows how can I do that it will be very helpfull for me.
BR
The Maxx
Click to expand...
Click to collapse
Here's another stab at it. I've cabbed this up. Install it and soft reset. Let me know how this one works out.
TaurusBullba said:
Here's another stab at it. I've cabbed this up. Install it and soft reset. Let me know how this one works out.
Click to expand...
Click to collapse
Thanks ... Downloading ... I'm going to try to use it with the Ijte's LEo 9 ROM. Thanks for your help ...
The Maxx
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
strix75 said:
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
Click to expand...
Click to collapse
Give this one a try. Install the keyboard first, then dictionary... soft reset.
strix75 said:
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
Click to expand...
Click to collapse
I never find how to change layout for Microsoft software keyboard but if your rom use EZinput software keyboard, you can change the layout with that:
Go to HKLM\Software\Tegic\et9
Change the value of DefaultLanguage
0109 -> qwerty
010C -> azerty
0107 -> qwertz
There is also 0110 and 010A avalaible but I don't know for which layout it is so you may have to try yourself
Click to expand...
Click to collapse
I do not know if nordic is supported and maybe there are other value than this ones but it is all that I know now...
Not Working
Hello again Taurusbulba... The cab don't work either .... I'm using the Ijte's TOUCH IT LEO 9 .... I did the follow: (1) Download the cab (2) copy to sd (3) install from SD (4) soft reset ... (5) Open word, excel and contacts and I have the same HTC Keyboard .... (6) try to setup the keyword from Start/Settings/Personal/Input ... and only have Touch Input....
Plese help me ...
Thanks a lot ....
The Maxx
strix75 said:
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
Click to expand...
Click to collapse
I removed your last post because you double-posted the same question. I answered you in post #10. Did you not see that? Try it out and let me know if it works.
sfreirez said:
Hello again Taurusbulba... The cab don't work either .... I'm using the Ijte's TOUCH IT LEO 9 .... I did the follow: (1) Download the cab (2) copy to sd (3) install from SD (4) soft reset ... (5) Open word, excel and contacts and I have the same HTC Keyboard .... (6) try to setup the keyword from Start/Settings/Personal/Input ... and only have Touch Input....
Plese help me ...
Thanks a lot ....
The Maxx
Click to expand...
Click to collapse
Well that's not good. I'll keep my eye out for another OEM Microsoft keyboard, but I'm running out of resources. No guarantees I can find one that'll work for your device though.
Since there is no SSPL or HARDSPL for X2 we dont have any option on making custom roms
i have started porting latest manila 2_5_2012 to x2
works fluent
i plan to make cabs for all htc apps that come with latest htc devices
if you like my work you can buy me an beer
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4300696
1st pack (Dialer and deps) http://www.multiupload.com/YQGEDIMWJD
HTCScroll_2_0_19221326_00
Video_Telephony_2_5_35575_0
Shared_Modules_1_01_19221333_00
HTCFramework_1_5_19223320_00
Volume_Control_2_2_20113221_00
Contact_Picker_1_0_20113132_00
HTCFont_Link_1_0_19132133_1
Contact_Utility_Engine_1_2_20113727_00
Concurrence_Mgr_1_5_19221227_00
Resource_Proxy_1_0_19221124_00
SharedResource_1_0_20111720_00
Phone_Canvas_Enhancement_4_2_51720111829_0
New_Contact_Card_1_1_20113729_0
2'nd pack http://www.multiupload.com/1D9Z6NCUJK
Manila_2_1_19193517_0
3'rd pack http://www.multiupload.com/R1BXPVJFQV
Album_3_2_20113921_0
CommManager_2_9_U_0 with 12 functios
INSTALATION INSTRUCTIONS
1.Copy files to windows folder
2.import registry with your preferate reg editor
3.REBOOT AFTER INSTALL
you can also delete panel manager and stop slideview to get sime speed
go...go...go...jer.
THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
I've got a X2 fromm vodafone and is unsoportable. We're waiting for your work.
jerpelea said:
Since there is no SSPL or HARDSPL for X2 we dont have any option on making custom roms
i have started porting latest manila 2_5_2012 to x2
works fluent
i plan to make cabs for all htc apps that come with latest htc devices
if you like my work you can buy me an beer
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4300696
Click to expand...
Click to collapse
The best news recently!
I have "tasted" the 6.5.2 update of X2 in some phase, I really liked it. I'm sure the 6.5.3 update combined with manila will make X2 to become the most comfortable gadget for my personal needs.
Many thanks for your efforts jerpela!
Great news, highly appreciated!
phone dialer ported
i will upload it tomorow
uploaded manila with split languages
copy only manila and your language to windows folder
inport registry with your favourite reg editor
landscape is enabled
looking good, any chance you can upload the lang files for the Dialer ?
Im using a nb-NO lang ( Norwegian Bokmål ) , so that the dialer will display stuff. Or is there a way to force it to use the English one ?
Giland said:
looking good, any chance you can upload the lang files for the Dialer ?
Im using a nb-NO lang ( Norwegian Bokmål ) , so that the dialer will display stuff. Or is there a way to force it to use the English one ?
Click to expand...
Click to collapse
for any other file than english you need to rename all 409 files to your country code
this will display english mesages !!!
if you want native language you have to translate yourself
I don't know if my problem has anything to do with FW revision (R1AD006).
First of all somehow registry import didn't work for me, only some registries were imported out of all I can see in the reg files. Then I made cabs of them and installed and all of them seemed to appear.
After this I was very happy when sence appeared on my X2! But then the problem came: in every 1-2 seconds the empty today screen blinked in.
I did a soft reset, then a hard reset and installed it right after again. But didn't solve the problem. And noticed that after maybe one minute the blinking turned into pulsating, empty today appeared more frequently but for lot shorter times.
I don't know what can cause this, any idea?
As much I was able to test it it seems to be quite fast!
bazsikar said:
I don't know if my problem has anything to do with FW revision (R1AD006).
First of all somehow registry import didn't work for me, only some registries were imported out of all I can see in the reg files. Then I made cabs of them and installed and all of them seemed to appear.
After this I was very happy when sence appeared on my X2! But then the problem came: in every 1-2 seconds the empty today screen blinked in.
I did a soft reset, then a hard reset and installed it right after again. But didn't solve the problem. And noticed that after maybe one minute the blinking turned into pulsating, empty today appeared more frequently but for lot shorter times.
I don't know what can cause this, any idea?
As much I was able to test it it seems to be quite fast!
Click to expand...
Click to collapse
1.import patch.reg
2.reboot phone
if is not working try
1.backup HKLM\Init
2.delete lines with xkey,panelmanager,SlideView
i am using it on 006 for 2 days without any glitch
yes is fast
jerpelea said:
1.import patch.reg
2.reboot phone
if is not working try
1.backup HKLM\Init
2.delete lines with xkey,panelmanager,SlideView
i am using it on 006 for 2 days without any glitch
yes is fast
Click to expand...
Click to collapse
2nd option worked, thanks! Now testing.
How meny of you have installed this on your X2.
Im trying and trying, but it looks like im mising something.
I have copied ewerything under the windows folder
and i can find only one reg entery calld manila.
What to do?
I realy wana make this work.
Help!!!
By the way grate post.
Just go ON
Sory but my English
ndjorovic said:
How meny of you have installed this on your X2.
Im trying and trying, but it looks like im mising something.
I have copied ewerything under the windows folder
and i can find only one reg entery calld manila.
What to do?
I realy wana make this work.
Help!!!
By the way grate post.
Just go ON
Sory but my English
Click to expand...
Click to collapse
Try to install these.
The bkinking still occurs after pushing slide view key once or twice.
I have other issues also but before sharing them maybe I should try patch.reg but it doesn't work.
Error message comes "line 302 - unsupported DirID 1" (HKCR) and line 234 in HKLM.
Besides it's very good feeling to have manila on X2. Now I won't feel to change back to X1 every now and then.
Hello, is possible to make/upload a cab for installing manila?
I am not sure with registry skills and copy and paste files to Windows folder is impossible with no free space message. Thanks
marcuchinonis said:
Hello, is possible to make/upload a cab for installing manila?
I am not sure with registry skills and copy and paste files to Windows folder is impossible with no free space message. Thanks
Click to expand...
Click to collapse
First I had to uninstall some apps when i tried it before hard reset. I don't know if you use SE User Guide (it's 4-5MB) or pixel city panels.
I am not an expert at all either, only trying to discover registry things, just managed to make the attached 2 cabs of jerpelea's all.reg and manila.reg and manila works after installing them.
I encountered some problems in the People tab.
When I click the All People button Manila restarts, the same thing happened when I click Updates & Events in a contact...
Is there any way to solve this?
Same here. i have problems with people tab, media tab, music tab.
Manila resets every time i try to change something + i cant import pictures or music files.
how to fix this unstable state of otherwise great MANILA!!!
Thanks!!!
ndjorovic said:
Same here. i have problems with people tab, media tab, music tab.
Manila resets every time i try to change something + i cant import pictures or music files.
how to fix this unstable state of otherwise great MANILA!!!
Thanks!!!
Click to expand...
Click to collapse
you need to copy all packages and install regs
not just 2
Hello people, i require a cab for the standard htc s730 Task Manager v1.22 (814.710) Build or something very close to that. for windows mobile 6.0 qvga non-touch screen.
thanks
Why are you looking for it? CeleTask is a lot better But if you realy need i can send you some files. Any concrecte language??
I require it, because it got corrupted, if you have the original one, can you please upload the cab for it in English language please. thanks
kuljit55 said:
I require it, because it got corrupted, if you have the original one, can you please upload the cab for it in English language please. thanks
Click to expand...
Click to collapse
I haven't cab and I can't make it, but can upload you some files... I include all language files. Hope it's help you.
thanks mate, but these files didnt work when i opened them on my fone
Like i thought:/ You have some registry changes, don't let corectly run IA_Task_Manager.exe. Only way is restore default registry setings from another phone, or Hard Resed the device...