Database Develop

problem with dopod gps-enabled keyboard

dear members
i've just installed the gps-enabled dopod rom and whenever i try to switch the built in key board to an arabic enabled keyboard that comes with the arabizer program (sold separetly from 2 companies, imaginet & informobility) , it refuses to change.
i even istalled resco keyboard pro but with the same problem.
does anybody know how to solve this problem?
is there a hack or a change in the registry that enables me to use any arabic enabled keyboard?
thanks for your help.

vasa vasorum said:
dear members
i've just installed the gps-enabled dopod rom and whenever i try to switch the built in key board to an arabic enabled keyboard that comes with the arabizer program (sold separetly from 2 companies, imaginet & informobility) , it refuses to change.
i even istalled resco keyboard pro but with the same problem.
does anybody know how to solve this problem?
is there a hack or a change in the registry that enables me to use any arabic enabled keyboard?
thanks for your help.
Click to expand...
Click to collapse
I can't get RapidCalc keyboard to load either. Other people have complained about keyboard software not loading also. Hopefully a Rom upgrade will fix the issue.

dear matterhorn
thanks for your reply. hopefully there would be a solution for this problem.
waiting for the experts to reply.

please guys >>>>>>>>>>>> around 100 visits and only one reply
pleaseeeeeeeeeeee i need a help.

Have you tried to set the non-loading keyboard as default input method using SKTools or SIPChange?
It did the trick with HTC PhonePad which also refused to load.

Apoc said:
Have you tried to set the non-loading keyboard as default input method using SKTools or SIPChange?
It did the trick with HTC PhonePad which also refused to load.
Click to expand...
Click to collapse
I Tried the SKTools, and my Trinity started to freeze right after softreset, so I had to do a Hard-reset
Tried the SIPChange, and viollaaaaaaaaaah my arabic keyboard is working now.... I didn't even change the defaults, I just installed the SIPChange and everything is normal
Thanks

dear apoc & mo7al
thanks for your response. i tried sktools but i couldnt figure out how to do it.
i have never heared about sipchange. can you send me the program and how to set the keyboard, please
thanks for your response

vasa vasorum said:
dear apoc & mo7al
thanks for your response. i tried sktools but i couldnt figure out how to do it.
i have never heared about sipchange. can you send me the program and how to set the keyboard, please
thanks for your response
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=271008

thanks a lot. you are really ra3eeha

hi there
still having the same problem ...
sipchange didnt work with me

RESCO Keyboard PRO worked for me.
You need to set ARABIC as the Primary Language, softrest.
I also tried another method and it worked as well. I extracted all the files from the extended rom beofore upgrading the ROM and then reinstalled them after the upgrade. The extended ROM files I extracted already included the IMAGINET Arabization.
Try these methods and let us know the results.

ajram said:
RESCO Keyboard PRO worked for me.
You need to set ARABIC as the Primary Language, softrest.
I also tried another method and it worked as well. I extracted all the files from the extended rom beofore upgrading the ROM and then reinstalled them after the upgrade. The extended ROM files I extracted already included the IMAGINET Arabization.
Try these methods and let us know the results.
Click to expand...
Click to collapse
Put my unit did not have imaginet arabizer on it.
Can you upload this files?

dear ajram
thank you for your reply. we'll be gratefull if you can upload the imaginet files that are extracted from the arabic rom.
I am using vgakey now and it is working. but sometmes it refuses to appear.
waiting for you

Here you go!

Thanks for the files I will try and give you the result

Works perfect and the keyboard issue is solved (until now). Was there any other imaginet files (Like the Dictionary and prayer times). If yes please complete your kind effort and post them.
Thanks in advance

Glad it is working for all.
I think the 2 cab files PP_AKv30-DefaultPage_ALL.CAB and PP_AKv33-DefaultPage_ARA-0401.CAB are the ones that are making the difference.
With regards to the other maginet applications, they came on a seperate CD. I will try to upload them later if the size permitts.

Dear ajram
it worked perfictly
thanks a lot

ajram said:
Glad it is working for all.
I think the 2 cab files PP_AKv30-DefaultPage_ALL.CAB and PP_AKv33-DefaultPage_ARA-0401.CAB are the ones that are making the difference.
With regards to the other maginet applications, they came on a seperate CD. I will try to upload them later if the size permitts.
Click to expand...
Click to collapse
Appreciate your help - waiting for your kind upload
Note : Until now (72 hours) Not a single problem with keyboard switch - thanks to ajram

Thank you very much, Realy it worked.
I belive you need only the 3 arabizer files to solve the problem which are,
CAB: \Extended_ROM\INCert_B377_2.CAB
CAB: \Extended_ROM\ACERTTahoma_HTC_B377_2.CAB
CAB: \Extended_ROM\MultiLang_AR_HTC_B377_2.CAB
These files are working on my device having no problem so far.
Thanks again.

I need help installing Resco Keyboard 5.01

Hello Everybody,
Please, I need help because the Resco Keyboard 5.01 will not working, I cannot fixed it. I use the Kaiser Diamond L26 V9 Rom Radio 1.58.25.17.
Please response.
Thanks in advance.
Greez Fred.

Fred Goossens said:
Hello Everybody,
Please, I need help because the Resco Keyboard 5.01 will not working, I cannot fixed it. I use the Kaiser Diamond L26 V9 Rom Radio 1.58.25.17.
Please response.
Thanks in advance.
Greez Fred.
Click to expand...
Click to collapse
How are you installing, a little more info?

The latest version is 5.11, try that, 5.01 is quite old...

bilbobrian said:
How are you installing, a little more info?
Click to expand...
Click to collapse
Hello Brian,
Thanks for your replay.
Installing:
1- I installed the trial version of the Pocketland(cab).
2- Start->Settings->Keyboard.
3- I choose the Resco Keyboard as default.
4- I let everything in the Resco Keyboard option default.
5- I did a soft reset.
6- I started words and activated the resco keyboard, the defauld is still active so the resco keyboard is not working?.
Greeze Fred.
Ps sorry my english that's not so good.
Please respons, my email: [email protected]

martythebrit said:
The latest version is 5.11, try that, 5.01 is quite old...
Click to expand...
Click to collapse
Hello Marty,
Thanks for your reply.
I also installed 5.1.1, the same problems.
Installing:
1- I installed the trial version of the Pocketland(cab).
2- Start->Settings->Keyboard.
3- I choose the Resco Keyboard as default.
4- I let everything in the Resco Keyboard option default.
5- I did a soft reset.
6- I started words and activated the resco keyboard, the defauld is still active so the resco keyboard is not working?.
Greeze Fred.
Ps sorry my english that's not so good.
Please respons, my email: [email protected]

here you go, try this it sounds like your keyboard is defaulting to the original one when you soft reset. mine did the same thing. do yourself a favor and really try to search alot of people will flame you on this kind of stuff.
hope this helps

bilbobrian said:
here you go, try this it sounds like your keyboard is defaulting to the original one when you soft reset. mine did the same thing. do yourself a favor and really try to search alot of people will flame you on this kind of stuff.
hope this helps
Click to expand...
Click to collapse
Brian,
The installation of the cab was unsuccesfull?
Gr.Fred

Fred Goossens said:
Brian,
The installation of the cab was unsuccesfull?
Gr.Fred
Click to expand...
Click to collapse
Brian,
The installation of the Sipchange.cab was unsuccessful?
The prvious version of Sleuth255's Sipchange cannot be removed.
Gr.Fred

did you go to programs sip changer and choose your default keyboard? did it actually say the installation was unsuccessful?

The installing was not successful, so I cannot go to the sipchange button to activate.

it worked for me, I would try doing a search for sip changer and try a different one, there are a few out there for kasiers. sorry i couldn't be of more help.

bilbobrian said:
did you go to programs sip changer and choose your default keyboard? did it actually say the installation was unsuccessful?
Click to expand...
Click to collapse
Brian,
The installation of the Sipchange.cab was unsuccessful, however the file was in the programs map?, so i choose the resco keyboard option and make a soft reset but notting change, the keyboard is still default?

bilbobrian said:
did you go to programs sip changer and choose your default keyboard? did it actually say the installation was unsuccessful?
Click to expand...
Click to collapse
Brian,
I don't understand the installation of the Sipchange.cab was not successful but the programe "sipchange" was in the programs map, so I choose the resco keyboard and soft reset, but nothing change te keyboard is still the default one.

Fred Goossens said:
Brian,
I don't understand the installation of the Sipchange.cab was not successful but the programe "sipchange" was in the programs map, so I choose the resco keyboard and soft reset, but nothing change te keyboard is still the default one.
Click to expand...
Click to collapse
when the keyboard opens there is an arrow to choose options, i assume that you are using that also?

bilbobrian said:
when the keyboard opens there is an arrow to choose options, i assume that you are using that also?
Click to expand...
Click to collapse
When I open the start->programs-> sipchange then I can choose the Resco keyboard and after that I click the button(dark) on the middle of the screen, I forgot the name to proceed, but that is not the option button like that one in the start->settings->keyboard program.So i think the Sipchange.cab was not for 100% installed.

try this one fred
i used this with pcm keyboard before. you might even try that keyboard, it is bigger and free, lots of skins

Cantonese Support?

I've just gotten my Touch Diamond a day ago and now I'm running Dutty's v2,3a rom, however I've noticed that it doesn't come with Cantonese support. Mp3's etc show *[email protected]()[email protected] instead of the Chinese CHARACTERS.
So can anybody tell me how install Chinese support?

Have a look here
Have Thai support on my Diamond & it works great.

Uhm, thanks but any free solutions?

Anybody else?

I'm not sure this solution has Cantonese support but you can give it a try. If it does not, don't blame me, I don't know Chinese
Also, this is not a solution to have the input things (no IME). You will only be able to read characters.
*Download Asukal's e-china for Diamond.
*Install the .cab. Soft reset.
*Download reloadnls.exe.
*Extract the .exe from the .zip and copy it to your Startup directory (usually Windows/Startup/)
*Soft reset.
*Check if your hard keys are still working. If not, add this registry value (it should already be added with the .cab) then soft reset
Code:
HKLM\System\CurrentControlSet\Control\Layouts\e0010411
"Keyboard Layout" = "00000409"
*Installing new languages support could make your keyboards messed up with the T9 input and stuck with numeric or symbol (full, compact and phone keyboards are concerned). If so, change those registry values :
Code:
HKCU\keyboard layout\Preload
"Default" = "e0010411" >> "Default" = "e0010409"
Code:
HKCU\keyboard layout\Preload\1
"Default" = "e0010411" >> "Default" = "e0010409"
I'm not sure if the last trick will work and fix your keyboards but it works for me.

Try this post in another thread on this fourm, its for the diamond:
http://forum.xda-developers.com/showpost.php?p=2590632&postcount=6
just follow it step by step and you will have chinese (cantonese) support

@Chenman: I just did that and after a softreset, it hangs @ the Windows Mobile 6.1 screen....hard reset?

Hey Sasimi, did you try the one I sent you via pm ?
Working fine on my diamond, Easy install with no hangups as of yet !

Sasimi said:
@Chenman: I just did that and after a softreset, it hangs @ the Windows Mobile 6.1 screen....hard reset?
Click to expand...
Click to collapse
Did you follow it step-by-step?
It didnt hang for me, but yeah, sounds like you might need to do a hard reset.

chenman said:
Did you follow it step-by-step?
It didnt hang for me, but yeah, sounds like you might need to do a hard reset.
Click to expand...
Click to collapse
Yeah, did it step by step, anyway, I just installed CE-star, which gave me chinese support too, so thanks anyway.

Sasimi said:
I've just gotten my Touch Diamond a day ago and now I'm running Dutty's v2,3a rom, however I've noticed that it doesn't come with Cantonese support. Mp3's etc show *[email protected]()[email protected] instead of the Chinese CHARACTERS.
So can anybody tell me how install Chinese support?
Click to expand...
Click to collapse
Why don't you simply install the Official Chinese ROM for Hong Kong?
This will surely be the best support for Cantonese!
http://forum.xda-developers.com/showthread.php?p=2441695#post2441695

Opal Keyboard Suite Fixed

So, I got it finaly working!!
I Wanted to use the Opal eT9 Keyboard Suite in my WWE Rom for quite some time now, but the T9 Menu with FN+Space maked it for me unuseable, because I need the function to produce ü,ä,ö for writing in German!!!!
I tried to make a fix cab but it didn't work...
So i made a cab with the Entire Suite which forwards the Original Funktion of the Fn-Space Key!
Many Thanks to DupinBJK for its original HTC Opal EzInput QVGA Project and MBarvian for his Keyboard Suite which i modified!!!
Update
So I think i got a working fix cab now!!
Just install it over the original HTC Opal EzInput or the MBavarian Keyboard Suite and it should work!
download it here : http://www.saddi.de/pda/downloads/Opal_Keyboard_Fix.cab
or the entire modified Suite (should be working with all languages now ) : http://www.saddi.de/pda/downloads/MBarvian_Opal_Keyboard_Suite_fixed.cab
or the OEM Package : http://www.saddi.de/pda/downloads/OEM_Input_Opal_Keyboards.rar

s4dd1 said:
So, I got it finaly working!!
I Wanted to use the Opal eT9 Keyboard Suite in my WWE Rom for quite some time now, but the T9 Menu with FN+Space maked it for me unuseable, because I need the function to produce ü,ä,ö for writing in German!!!!
I tried to make a fix cab but it didn't work...
So i made a cab with the Entire Suite which forwards the Original Funktion of the Fn-Space Key!
Many Thanks to DupinBJK for its original HTC Opal EzInput QVGA Project and MBarvian for his Keyboard Suite which i modified!!!
download it here : http://www.saddi.de/pda/downloads/Mbavarian_Keyboard_Suite_ger.cab
Click to expand...
Click to collapse
Dude, this is only english? Any way to add more languages. Facing the same problem, want to use Opal Keyboard with portuguese language but I also need fn+space combination.
Can you help me with that?

not-available said:
Dude, this is only english? Any way to add more languages. Facing the same problem, want to use Opal Keyboard with portuguese language but I also need fn+space combination.
Can you help me with that?
Click to expand...
Click to collapse
Maybe
Form your Signiture, i'm guessing that you useing a WWE Rom...
Maybe with Portugguese Input form http://forum.xda-developers.com/showthread.php?t=345426 ?!
For testing I need to know how your Device shoud behave if you press Fn-Space

s4dd1 said:
Maybe
Form your Signiture, i'm guessing that you useing a WWE Rom...
Maybe with Portugguese Input form http://forum.xda-developers.com/showthread.php?t=345426 ?!
For testing I need to know how your Device shoud behave if you press Fn-Space
Click to expand...
Click to collapse
Hey dude,
Let me explain you what I did:
1- installed a wwe rom as you said;
2- went to this post http://forum.xda-developers.com/showthread.php?t=426281 and downloaded [Full Keyboard] - phones with full HW keyboard (cab here http://www.4shared.com/file/65653543/320f3183/BJK_HTC_EzInput_QVGA_FullKbd_0409-RC1.html ) and installed the language from the same post (cab here http://www.4shared.com/file/65653788/aec7369/BJK_HTC_EzInput_QVGA_LPack_PT-RC1.html )
I can now use that nice keyboard, but when I slice hardeware keyboard, before if I want to do a "á" I should write "a" and the click fn-space to choose à, á, ä, etc.
After install those cabs and do the fn-space combination I get a menu to choose T9 portuguese, abc, choose language of the keyboard, t9 settings and about t9.

you can try the Fix now (first post), hope it works for you!!

s4dd1 said:
you can try the Fix now (first post), hope it works for you!!
Click to expand...
Click to collapse
Dude, one word. P E R F E C T.
Many thanks.
Regards

Moved this to Kaiser Software.

Full Hebrew support for HTC Touch HD.

Full Hebrew support for the Touch HD devices.
*** Full translated OS
*** Hebrew keyboard replaceing the Italian keyboard
*** Right to left supporting
Backup your device before the install! there is no uninstall for the language!
instruction:
1) close all the application on your device
2) install the 1 files (named 1-HebRTL+kbd+dialer.cab)
3) DO NOT RESTART THE DEVICE. CANCEL THE REQUEST.
4) install the 2 files (named 2-Full MUI.CAB)
5) restart your device, and N-joy.
link:
http://hidemyass.com/files/oR7j7
password to the rar:
the_dude

Thanks,
Is there an option to disable the Full system translation?
Will this work for the Sprint Touch PRO too?

Hi
pinny said:
Thanks,
Is there an option to disable the Full system translation?
Will this work for the Sprint Touch PRO too?
Click to expand...
Click to collapse
I don't think so - it looks like it's a full OS translation.
there is lot's of part-translation solutions for most of the devices today.
BTW, it works really good!
great work dude

moved to the HD section

will it work on the diamond?

it will work on my htc fuze???
EDIT: This is working good on my HTC fuze
p.s. must do HR to delete all the previous hebrew software!!!

Does it show Hebrew in office as well?
Is it possible to set it as Hebrew enabled (Hebrew support but english menues)?

I took a close look, it's a full translation for the Touch HD.
I think that it will work on other devices but you will have some mistakes (such as 5 mp camera in Diamond...)

hmm...
roisagi said:
will it work on the diamond?
Click to expand...
Click to collapse
I made it for the Touch HD - there is lot's of different solutions for the Diamond.
But, you can try it (backup yourself first)...

hmm...
chompy18 said:
Does it show Hebrew in office as well?
Is it possible to set it as Hebrew enabled (Hebrew support but english menues)?
Click to expand...
Click to collapse
It's a FULL OS TRANSLATION.
including the office applications, the games, the HTC applications, etc...
If you need only Hebrew support and keyboard - search for the Polaris Hebrew solution.

I am aware of the polaris hebrew.
I was wondering if only installing the first cab - will it enable hebrew and keyboard but keep the OS in english.

chompy18 said:
I am aware of the polaris hebrew.
I was wondering if only installing the first cab - will it enable hebrew and keyboard but keep the OS in english.
Click to expand...
Click to collapse
I looked inside the cab files, the first file is the polaris hebrew install with keyboard txt files, so i believe it will install only Heb fonts, right-left support and Heb keyboard. can you confirm that for the other people who's asking the same question?
and "dude" - do you have any suggest for the dialer?

Thanks for doing this!
Using Touch Pro:
Just tried installing the first cab, not the second, and I got the Hebrew fonts, right->left, and keyboard, which is all I want.
It's not a perfect system. For example, on the Hebrew keyboard (really Italian), there is no period. Also, in some apps, e.g. Notes, it's impossible to use as it puts the spaces in the wrong places. In Word, the spaces are correct but the cursor is in the wrong place. (All these issued may not be issues if the interface is Hebrew. I didn't try that).
I've purchased PDAC, and am waiting for them to send me the program, hopefully it will work for me. Eyron didn't work well so PDAC is my only hope.
EDIT: I uninstalled it and it seems to have uninstalled fine.

regarding the keyboard - look in the polaris thread.
I posted there (posts 400 and 401 I think) mappings for the Touch HD that I made. There are dot there as well as all the long-press keys.

chompy18 said:
regarding the keyboard - look in the polaris thread.
I posted there (posts 400 and 401 I think) mappings for the Touch HD that I made. There are dot there as well as all the long-press keys.
Click to expand...
Click to collapse
Thanks. I downloaded the keyboard.cab and the text file you provided, but I don't know what I should replace with the text file.

Just replace the files in \windows with the new files I provided.

TF3D isn't working at all.
I'm with 1.19 based cooked ROM, and TF3D won't load. It's saying "tap to launch TF3D", I do tap, but it won't load.
Any ideas?
Amir.
Another update: after installation the phone doesn't work at all. No network at all times. Something is stuck.
Amir.

amir77a said:
TF3D isn't working at all.
I'm with 1.19 based cooked ROM, and TF3D won't load. It's saying "tap to launch TF3D", I do tap, but it won't load.
Any ideas?
Amir.
Another update: after installation the phone doesn't work at all. No network at all times. Something is stuck.
Amir.
Click to expand...
Click to collapse
Work great for me, did you install it on device that have already Hebrew support? try to HR the device and install it on clean ROM.

bTaryag said:
Thanks for doing this!
Using Touch Pro:
Just tried installing the first cab, not the second, and I got the Hebrew fonts, right->left, and keyboard, which is all I want.
It's not a perfect system. For example, on the Hebrew keyboard (really Italian), there is no period. Also, in some apps, e.g. Notes, it's impossible to use as it puts the spaces in the wrong places. In Word, the spaces are correct but the cursor is in the wrong place. (All these issued may not be issues if the interface is Hebrew. I didn't try that).
I've purchased PDAC, and am waiting for them to send me the program, hopefully it will work for me. Eyron didn't work well so PDAC is my only hope.
EDIT: I uninstalled it and it seems to have uninstalled fine.
Click to expand...
Click to collapse
All the issues with spaces and cursor are because you didn't install the mui.cab file.
you have there the *.css files which are dealing with those problem...

avimak said:
Work great for me, did you install it on device that have already Hebrew support? try to HR the device and install it on clean ROM.
Click to expand...
Click to collapse
nope. This was the first item to install, after HR.
The problem occurs with all Free Hebrew versions.
Which 1.19 ROM did you install?