Related
dear members
i've just installed the gps-enabled dopod rom and whenever i try to switch the built in key board to an arabic enabled keyboard that comes with the arabizer program (sold separetly from 2 companies, imaginet & informobility) , it refuses to change.
i even istalled resco keyboard pro but with the same problem.
does anybody know how to solve this problem?
is there a hack or a change in the registry that enables me to use any arabic enabled keyboard?
thanks for your help.
vasa vasorum said:
dear members
i've just installed the gps-enabled dopod rom and whenever i try to switch the built in key board to an arabic enabled keyboard that comes with the arabizer program (sold separetly from 2 companies, imaginet & informobility) , it refuses to change.
i even istalled resco keyboard pro but with the same problem.
does anybody know how to solve this problem?
is there a hack or a change in the registry that enables me to use any arabic enabled keyboard?
thanks for your help.
Click to expand...
Click to collapse
I can't get RapidCalc keyboard to load either. Other people have complained about keyboard software not loading also. Hopefully a Rom upgrade will fix the issue.
dear matterhorn
thanks for your reply. hopefully there would be a solution for this problem.
waiting for the experts to reply.
please guys >>>>>>>>>>>> around 100 visits and only one reply
pleaseeeeeeeeeeee i need a help.
Have you tried to set the non-loading keyboard as default input method using SKTools or SIPChange?
It did the trick with HTC PhonePad which also refused to load.
Apoc said:
Have you tried to set the non-loading keyboard as default input method using SKTools or SIPChange?
It did the trick with HTC PhonePad which also refused to load.
Click to expand...
Click to collapse
I Tried the SKTools, and my Trinity started to freeze right after softreset, so I had to do a Hard-reset
Tried the SIPChange, and viollaaaaaaaaaah my arabic keyboard is working now.... I didn't even change the defaults, I just installed the SIPChange and everything is normal
Thanks
dear apoc & mo7al
thanks for your response. i tried sktools but i couldnt figure out how to do it.
i have never heared about sipchange. can you send me the program and how to set the keyboard, please
thanks for your response
vasa vasorum said:
dear apoc & mo7al
thanks for your response. i tried sktools but i couldnt figure out how to do it.
i have never heared about sipchange. can you send me the program and how to set the keyboard, please
thanks for your response
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=271008
thanks a lot. you are really ra3eeha
hi there
still having the same problem ...
sipchange didnt work with me
RESCO Keyboard PRO worked for me.
You need to set ARABIC as the Primary Language, softrest.
I also tried another method and it worked as well. I extracted all the files from the extended rom beofore upgrading the ROM and then reinstalled them after the upgrade. The extended ROM files I extracted already included the IMAGINET Arabization.
Try these methods and let us know the results.
ajram said:
RESCO Keyboard PRO worked for me.
You need to set ARABIC as the Primary Language, softrest.
I also tried another method and it worked as well. I extracted all the files from the extended rom beofore upgrading the ROM and then reinstalled them after the upgrade. The extended ROM files I extracted already included the IMAGINET Arabization.
Try these methods and let us know the results.
Click to expand...
Click to collapse
Put my unit did not have imaginet arabizer on it.
Can you upload this files?
dear ajram
thank you for your reply. we'll be gratefull if you can upload the imaginet files that are extracted from the arabic rom.
I am using vgakey now and it is working. but sometmes it refuses to appear.
waiting for you
Here you go!
Thanks for the files I will try and give you the result
Works perfect and the keyboard issue is solved (until now). Was there any other imaginet files (Like the Dictionary and prayer times). If yes please complete your kind effort and post them.
Thanks in advance
Glad it is working for all.
I think the 2 cab files PP_AKv30-DefaultPage_ALL.CAB and PP_AKv33-DefaultPage_ARA-0401.CAB are the ones that are making the difference.
With regards to the other maginet applications, they came on a seperate CD. I will try to upload them later if the size permitts.
Dear ajram
it worked perfictly
thanks a lot
ajram said:
Glad it is working for all.
I think the 2 cab files PP_AKv30-DefaultPage_ALL.CAB and PP_AKv33-DefaultPage_ARA-0401.CAB are the ones that are making the difference.
With regards to the other maginet applications, they came on a seperate CD. I will try to upload them later if the size permitts.
Click to expand...
Click to collapse
Appreciate your help - waiting for your kind upload
Note : Until now (72 hours) Not a single problem with keyboard switch - thanks to ajram
Thank you very much, Realy it worked.
I belive you need only the 3 arabizer files to solve the problem which are,
CAB: \Extended_ROM\INCert_B377_2.CAB
CAB: \Extended_ROM\ACERTTahoma_HTC_B377_2.CAB
CAB: \Extended_ROM\MultiLang_AR_HTC_B377_2.CAB
These files are working on my device having no problem so far.
Thanks again.
Full Hebrew support for the Touch HD devices.
*** Full translated OS
*** Hebrew keyboard replaceing the Italian keyboard
*** Right to left supporting
Backup your device before the install! there is no uninstall for the language!
instruction:
1) close all the application on your device
2) install the 1 files (named 1-HebRTL+kbd+dialer.cab)
3) DO NOT RESTART THE DEVICE. CANCEL THE REQUEST.
4) install the 2 files (named 2-Full MUI.CAB)
5) restart your device, and N-joy.
link:
http://hidemyass.com/files/oR7j7
password to the rar:
the_dude
Thanks,
Is there an option to disable the Full system translation?
Will this work for the Sprint Touch PRO too?
Hi
pinny said:
Thanks,
Is there an option to disable the Full system translation?
Will this work for the Sprint Touch PRO too?
Click to expand...
Click to collapse
I don't think so - it looks like it's a full OS translation.
there is lot's of part-translation solutions for most of the devices today.
BTW, it works really good!
great work dude
moved to the HD section
will it work on the diamond?
it will work on my htc fuze???
EDIT: This is working good on my HTC fuze
p.s. must do HR to delete all the previous hebrew software!!!
Does it show Hebrew in office as well?
Is it possible to set it as Hebrew enabled (Hebrew support but english menues)?
I took a close look, it's a full translation for the Touch HD.
I think that it will work on other devices but you will have some mistakes (such as 5 mp camera in Diamond...)
hmm...
roisagi said:
will it work on the diamond?
Click to expand...
Click to collapse
I made it for the Touch HD - there is lot's of different solutions for the Diamond.
But, you can try it (backup yourself first)...
hmm...
chompy18 said:
Does it show Hebrew in office as well?
Is it possible to set it as Hebrew enabled (Hebrew support but english menues)?
Click to expand...
Click to collapse
It's a FULL OS TRANSLATION.
including the office applications, the games, the HTC applications, etc...
If you need only Hebrew support and keyboard - search for the Polaris Hebrew solution.
I am aware of the polaris hebrew.
I was wondering if only installing the first cab - will it enable hebrew and keyboard but keep the OS in english.
chompy18 said:
I am aware of the polaris hebrew.
I was wondering if only installing the first cab - will it enable hebrew and keyboard but keep the OS in english.
Click to expand...
Click to collapse
I looked inside the cab files, the first file is the polaris hebrew install with keyboard txt files, so i believe it will install only Heb fonts, right-left support and Heb keyboard. can you confirm that for the other people who's asking the same question?
and "dude" - do you have any suggest for the dialer?
Thanks for doing this!
Using Touch Pro:
Just tried installing the first cab, not the second, and I got the Hebrew fonts, right->left, and keyboard, which is all I want.
It's not a perfect system. For example, on the Hebrew keyboard (really Italian), there is no period. Also, in some apps, e.g. Notes, it's impossible to use as it puts the spaces in the wrong places. In Word, the spaces are correct but the cursor is in the wrong place. (All these issued may not be issues if the interface is Hebrew. I didn't try that).
I've purchased PDAC, and am waiting for them to send me the program, hopefully it will work for me. Eyron didn't work well so PDAC is my only hope.
EDIT: I uninstalled it and it seems to have uninstalled fine.
regarding the keyboard - look in the polaris thread.
I posted there (posts 400 and 401 I think) mappings for the Touch HD that I made. There are dot there as well as all the long-press keys.
chompy18 said:
regarding the keyboard - look in the polaris thread.
I posted there (posts 400 and 401 I think) mappings for the Touch HD that I made. There are dot there as well as all the long-press keys.
Click to expand...
Click to collapse
Thanks. I downloaded the keyboard.cab and the text file you provided, but I don't know what I should replace with the text file.
Just replace the files in \windows with the new files I provided.
TF3D isn't working at all.
I'm with 1.19 based cooked ROM, and TF3D won't load. It's saying "tap to launch TF3D", I do tap, but it won't load.
Any ideas?
Amir.
Another update: after installation the phone doesn't work at all. No network at all times. Something is stuck.
Amir.
amir77a said:
TF3D isn't working at all.
I'm with 1.19 based cooked ROM, and TF3D won't load. It's saying "tap to launch TF3D", I do tap, but it won't load.
Any ideas?
Amir.
Another update: after installation the phone doesn't work at all. No network at all times. Something is stuck.
Amir.
Click to expand...
Click to collapse
Work great for me, did you install it on device that have already Hebrew support? try to HR the device and install it on clean ROM.
bTaryag said:
Thanks for doing this!
Using Touch Pro:
Just tried installing the first cab, not the second, and I got the Hebrew fonts, right->left, and keyboard, which is all I want.
It's not a perfect system. For example, on the Hebrew keyboard (really Italian), there is no period. Also, in some apps, e.g. Notes, it's impossible to use as it puts the spaces in the wrong places. In Word, the spaces are correct but the cursor is in the wrong place. (All these issued may not be issues if the interface is Hebrew. I didn't try that).
I've purchased PDAC, and am waiting for them to send me the program, hopefully it will work for me. Eyron didn't work well so PDAC is my only hope.
EDIT: I uninstalled it and it seems to have uninstalled fine.
Click to expand...
Click to collapse
All the issues with spaces and cursor are because you didn't install the mui.cab file.
you have there the *.css files which are dealing with those problem...
avimak said:
Work great for me, did you install it on device that have already Hebrew support? try to HR the device and install it on clean ROM.
Click to expand...
Click to collapse
nope. This was the first item to install, after HR.
The problem occurs with all Free Hebrew versions.
Which 1.19 ROM did you install?
Hello to everyone and thanks in advanced for your help ...
I would like to know how can I return to the Windows Mobile Old keyboard ... the one that has handwriting posibility .... I try several roms ... and I like them but I don't like the HTC new keyword ... I really prefer the old version because I think is fast for me writing than tiping ...
Actually I'm using Itje's Touch-IT v16 with winmo 6.1
Thaks a lot ....
The Maxx
This transcriber cab might work for you.
edit: If that doesn't work, or if you'd just like the entire OEM keyboard, here you go.
thanks ... but both cabs don't work or maybe I don't know how it work.
sfreirez said:
Hello to everyone and thanks in advanced for your help ...
I would like to know how can I return to the Windows Mobile Old keyboard ... the one that has handwriting posibility .... I try several roms ... and I like them but I don't like the HTC new keyword ... I really prefer the old version because I think is fast for me writing than tiping ...
Actually I'm using Itje's Touch-IT v16 with winmo 6.1
Thaks a lot ....
The Maxx
Click to expand...
Click to collapse
Look for Calligrapher from phatware. It's the advanced version from the built in one.
jackleung said:
Look for Calligrapher from phatware. It's the advanced version from the built in one.
Click to expand...
Click to collapse
Thanks I looking for it rigth now .... anyway Is possible disable the input way that the manila's rom has? maybe by regedit and return to the windows mobile original?
I just donwloaded the .cab file, but I think is not what I'm looking for ... I'm want to disable the HTC input method and use the old that came with windows mobile the one that has block recognizer, keyboard, letter recognizer and simbol pad. Please if some one knows how can I do that it will be very helpfull for me.
BR
The Maxx
sfreirez said:
I just donwloaded the .cab file, but I think is not what I'm looking for ... I'm want to disable the HTC input method and use the old that came with windows mobile the one that has block recognizer, keyboard, letter recognizer and simbol pad. Please if some one knows how can I do that it will be very helpfull for me.
BR
The Maxx
Click to expand...
Click to collapse
Here's another stab at it. I've cabbed this up. Install it and soft reset. Let me know how this one works out.
TaurusBullba said:
Here's another stab at it. I've cabbed this up. Install it and soft reset. Let me know how this one works out.
Click to expand...
Click to collapse
Thanks ... Downloading ... I'm going to try to use it with the Ijte's LEo 9 ROM. Thanks for your help ...
The Maxx
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
strix75 said:
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
Click to expand...
Click to collapse
Give this one a try. Install the keyboard first, then dictionary... soft reset.
strix75 said:
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
Click to expand...
Click to collapse
I never find how to change layout for Microsoft software keyboard but if your rom use EZinput software keyboard, you can change the layout with that:
Go to HKLM\Software\Tegic\et9
Change the value of DefaultLanguage
0109 -> qwerty
010C -> azerty
0107 -> qwertz
There is also 0110 and 010A avalaible but I don't know for which layout it is so you may have to try yourself
Click to expand...
Click to collapse
I do not know if nordic is supported and maybe there are other value than this ones but it is all that I know now...
Not Working
Hello again Taurusbulba... The cab don't work either .... I'm using the Ijte's TOUCH IT LEO 9 .... I did the follow: (1) Download the cab (2) copy to sd (3) install from SD (4) soft reset ... (5) Open word, excel and contacts and I have the same HTC Keyboard .... (6) try to setup the keyword from Start/Settings/Personal/Input ... and only have Touch Input....
Plese help me ...
Thanks a lot ....
The Maxx
strix75 said:
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
Click to expand...
Click to collapse
I removed your last post because you double-posted the same question. I answered you in post #10. Did you not see that? Try it out and let me know if it works.
sfreirez said:
Hello again Taurusbulba... The cab don't work either .... I'm using the Ijte's TOUCH IT LEO 9 .... I did the follow: (1) Download the cab (2) copy to sd (3) install from SD (4) soft reset ... (5) Open word, excel and contacts and I have the same HTC Keyboard .... (6) try to setup the keyword from Start/Settings/Personal/Input ... and only have Touch Input....
Plese help me ...
Thanks a lot ....
The Maxx
Click to expand...
Click to collapse
Well that's not good. I'll keep my eye out for another OEM Microsoft keyboard, but I'm running out of resources. No guarantees I can find one that'll work for your device though.
Is is possible to extract the Chinese Font and input method from the Official HKCSL_WWE ROM? (CSL is a phone company in Hong Kong)
I am using the Offcial HKCSL_WWE ROM on my Pure now but I would like to use some nicely customize ROM find here.
The only only problem is I need Chinese. I wish I can put the Chinese font and input method to some cooked ROM.
Thank you for any reply,
From my experience with it so far, not really. The input has not been successfully installed on top of any of the existing cooked roms.
You will have to cook your own rom using HK CSL CHT input. I have not seen any of the cooked roms on here providing the CHT input.
yup...probably like what you said..
OCedHrt said:
From my experience with it so far, not really. The input has not been successfully installed on top of any of the existing cooked roms.
You will have to cook your own rom using HK CSL CHT input. I have not seen any of the cooked roms on here providing the CHT input.
Click to expand...
Click to collapse
i've been trying not less 100 time of flashing roms with most chinese font and input...i finally found that the Ricky's made "chinese font" solved my display problem on viewing chinese characters
OCedHrt said:
From my experience with it so far, not really. The input has not been successfully installed on top of any of the existing cooked roms.
You will have to cook your own rom using HK CSL CHT input. I have not seen any of the cooked roms on here providing the CHT input.
Click to expand...
Click to collapse
So, how do I extract the input method? Do I do that in nbh or the on the phone?
queer~dude said:
i've been trying not less 100 time of flashing roms with most chinese font and input...i finally found that the Ricky's made "chinese font" solved my display problem on viewing chinese characters
Click to expand...
Click to collapse
Where can I found Ricky's chinese font? Is it a add-on or need to be cooked in?
Thanks every one
queer~dude said:
i've been trying not less 100 time of flashing roms with most chinese font and input...i finally found that the Ricky's made "chinese font" solved my display problem on viewing chinese characters
Click to expand...
Click to collapse
agree!
can you help me out? Looks like Ricky's MSYaHei v6.0 cannot be installed on the new Manila 2.5.2011.30300 (Leo 2.54) anymore...any updates, please? I've lost Ricky's website address. thanks.
BumAround said:
agree!
can you help me out? Looks like Ricky's MSYaHei v6.0 cannot be installed on the new Manila 2.5.2011.30300 (Leo 2.54) anymore...any updates, please? I've lost Ricky's website address. thanks.
Click to expand...
Click to collapse
These are the cabs I use to get Chinese display on my Topaz. Seems to work fine with the new manila. First, I install the font cab, then without rebooting, install the NLS cab. Then reboot. Sometimes it takes 2 reboots to get working, but so far so good. These cabs only provide support for viewing Chinese, not typing it. You'll need to find something else for that. There are several input methods floating around on xda if u look.
Good Luck
i use ricky 6.5 chinese cab too. [tho i edit the cab and put another font in it, cuz the one ricky had was bold and i didnt want bold ^^;]
heres the procedure i use everytime i flashed a custom [energy] rom::
1. install TF3D2.Chinese.Taiwan_20090917_xmatrix.cab [by xkaiser] to convert most words to chinese. no need to reboot after install. n u will notice most things r displayed as squares now [install this if you want your manila to display in chinese, proceed to #2 if installed, if not installed, no need to do step 2]
2. IMPORTANT copy the files in smsfix.zip to \Windows root folder [this is because the language pack deleted the sms notification files, so if you dont add these files back, you will not receive any sound or vibrate when a new message comes in]
3. install RickyMSYH6.0Full__.cab follow the installation and soft reset when it asks to reset
4. install HTC Rhodium A4 IME V2.8 WVGA.cab [this is a chinese input that im currently using, it was designed for a touchpro2, so the keyboard is pretty much alike as the one we are using. tho... this one doesnt have handwritten input :[ ] this software is in simplifed chinese, but it works fine with typing traditional and hong kong characters
i dont know if installing these cabs will have any side affects though, i have no problem with it. been using them for awhile now, and they work with all the energy roms ive flashed [including the latest topaz 2011 build]
do it on your own risk :]
i zipped and uploaded the files i used
http://www.sendspace.com/file/08vu3l
mindofmike said:
These are the cabs I use to get Chinese display on my Topaz. Seems to work fine with the new manila. First, I install the font cab, then without rebooting, install the NLS cab. Then reboot. Sometimes it takes 2 reboots to get working, but so far so good. These cabs only provide support for viewing Chinese, not typing it. You'll need to find something else for that. There are several input methods floating around on xda if u look.
Good Luck
Click to expand...
Click to collapse
yunchikan said:
i use ricky 6.5 chinese cab too. [tho i edit the cab and put another font in it, cuz the one ricky had was bold and i didnt want bold ^^;]
heres the procedure i use everytime i flashed a custom [energy] rom::
1. install TF3D2.Chinese.Taiwan_20090917_xmatrix.cab [by xkaiser] to convert most words to chinese. no need to reboot after install. n u will notice most things r displayed as squares now
2. IMPORTANT copy the files in smsfix.zip to \Windows root folder [this is because the language pack deleted the sms notification files, so if you dont add these files back, you will not receive any sound or vibrate when a new message comes in]
3. install RickyMSYH6.0Full__.cab follow the installation and soft reset when it asks to reset
4. install HTC Rhodium A4 IME V2.8 WVGA.cab [this is a chinese input that im currently using, it was designed for a touchpro2, so the keyboard is pretty much alike as the one we are using. tho... this one doesnt have handwritten input :[ ] this software is in simplifed chinese, but it works fine with typing traditional and hong kong characters
i dont know if installing these cabs will have any side affects though, i have no problem with it. been using them for awhile now, and they work with all the energy roms ive flashed [including the latest topaz 2011 build]
do it on your own risk :]
i zipped and upload the files i used
http://www.mediafire.com/?n2mjzmmzzdz
Click to expand...
Click to collapse
Thank you both. I wonder if the file(s) provided will work on the latest/newest Sense 2.5 (Manila 2.5.2011.30300) with Leo 2.54? Because the Ricky's MSYahei6 no longer work. In the meantime I do not need chinese input, only need the chinese display/support.
Anybody knows Ricky's website, please?
BumAround said:
Anybody knows Ricky's website, please?
Click to expand...
Click to collapse
http://ricky119.com/chinesefont/?replytocom=983
BumAround said:
Thank you both. I wonder if the file(s) provided will work on the latest/newest Sense 2.5 (Manila 2.5.2011.30300) with Leo 2.54? Because the Ricky's MSYahei6 no longer work. In the meantime I do not need chinese input, only need the chinese display/support.
Click to expand...
Click to collapse
hmm..
im using that same latest Manila [energy rom feb 1st release]
and the cab i provided in the post works for me..
dont know if it will work with Leo 2.54 tho. you can try. it works on my Topaz :]
Chinese input
QQpinyin(QQ手机输入法)
website:http://mobile.qq.com/py/
sougou(搜狗输入法)
http://shouji.sogou.com/
Baidu(百度手机输入法)
http://ishouji.baidu.com/input/
i use QQpinyin, i like the skin of it
Thanks everyone for providing the Chinese support download.
Get back to the original question, can I extract the Chinese font and input method from the ROM?
Thanks,
RayYung said:
Thanks everyone for providing the Chinese support download.
Get back to the original question, can I extract the Chinese font and input method from the ROM?
Thanks,
Click to expand...
Click to collapse
What everyone is saying is that even if you successfully extract the files, you couldn't install them into a cooked ROM. You would need to create your own ROM and add the chinese input when you cook it. I have tried some cabs in XDA that claim to let you use the htc chinese input and fonts, but they never worked for me. In fact they totally screwed up my phone and I had to hard reset.
That being said, you could (potentially) dump the rom you are using, then import it into a kitchen and cook your own custom ROM. There are lots of cooking tutorials on this site if you look around, but be prepared to invest considerable time and energy into the learning process. And to be honest, I think the other viewing and input methods listed in this thread are superior.
Just my 2 cents.
queer~dude said:
i've been trying not less 100 time of flashing roms with most chinese font and input...i finally found that the Ricky's made "chinese font" solved my display problem on viewing chinese characters
Click to expand...
Click to collapse
The display problem is very easy to fix. There are many fonts out there that work on Manila. If that's what is being looked for, I think some solutions have already been posted in this thread.
However, if you're trying to get the original HK CSL HTC CHT IME installed, then I am not aware of any solutions yet.
mindofmike said:
What everyone is saying is that even if you successfully extract the files, you couldn't install them into a cooked ROM. You would need to create your own ROM and add the chinese input when you cook it. I have tried some cabs in XDA that claim to let you use the htc chinese input and fonts, but they never worked for me. In fact they totally screwed up my phone and I had to hard reset.
That being said, you could (potentially) dump the rom you are using, then import it into a kitchen and cook your own custom ROM. There are lots of cooking tutorials on this site if you look around, but be prepared to invest considerable time and energy into the learning process. And to be honest, I think the other viewing and input methods listed in this thread are superior.
Just my 2 cents.
Click to expand...
Click to collapse
Actually, that is a good idea ^^. I'm going to try dumping and adding. I do have the extracted inputs.
yunchikan said:
i use ricky 6.5 chinese cab too. [tho i edit the cab and put another font in it, cuz the one ricky had was bold and i didnt want bold ^^;]
heres the procedure i use everytime i flashed a custom [energy] rom::
1. install TF3D2.Chinese.Taiwan_20090917_xmatrix.cab [by xkaiser] to convert most words to chinese. no need to reboot after install. n u will notice most things r displayed as squares now [install this if you want your manila to display in chinese, proceed to #2 if installed, if not installed, no need to do step 2]
2. IMPORTANT copy the files in smsfix.zip to \Windows root folder [this is because the language pack deleted the sms notification files, so if you dont add these files back, you will not receive any sound or vibrate when a new message comes in]
3. install RickyMSYH6.0Full__.cab follow the installation and soft reset when it asks to reset
4. install HTC Rhodium A4 IME V2.8 WVGA.cab [this is a chinese input that im currently using, it was designed for a touchpro2, so the keyboard is pretty much alike as the one we are using. tho... this one doesnt have handwritten input :[ ] this software is in simplifed chinese, but it works fine with typing traditional and hong kong characters
i dont know if installing these cabs will have any side affects though, i have no problem with it. been using them for awhile now, and they work with all the energy roms ive flashed [including the latest topaz 2011 build]
do it on your own risk :]
i zipped and upload the files i used
http://www.mediafire.com/?n2mjzmmzzdz
Click to expand...
Click to collapse
hi can you try to reupload the files as i couldnt download
I have successfully installed this Chinese IME (official ezinput) on the NhatHoa ROM using 23529 and manila 2011 3030. I did first install Chinese fonts and a NLS cab... (u can look for my post earlier in the thread.)
Seems to be working fine so far. Better backup before you try it though. I have heard it cant be uninstalled very easily.
mindofmike said:
I have sucessfully installed this Chinese IME (official ezinput) on the NhatHoa ROM using 23529 and manila 2011 3030. I did first install Chinese fonts and a NLS cab... (u can look for my post earlier in the thread.)
Seems to be working fine so far. Better backup before you try it though. I have heard it cant be uninstalled very easily.
Click to expand...
Click to collapse
thanks for the heads up. now, after the install into a WWE ROM, will one still be able to input Chinese or English by switching the keyboard/input method or something?
damn good!!!
i love the official chinese keyboard interface and this is what i've been looking for since i started to flash english cooked rom!!!
BumAround said:
thanks for the heads up. now, after the install into a WWE ROM, will one still be able to input Chinese or English by switching the keyboard/input method or something?
Click to expand...
Click to collapse
Actually can use both English and Chinese directly with a keyboard button and also by changing sip... working great so far. Also both English and Chinese dictionaries seem to be working ok.
Since there is no SSPL or HARDSPL for X2 we dont have any option on making custom roms
i have started porting latest manila 2_5_2012 to x2
works fluent
i plan to make cabs for all htc apps that come with latest htc devices
if you like my work you can buy me an beer
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4300696
1st pack (Dialer and deps) http://www.multiupload.com/YQGEDIMWJD
HTCScroll_2_0_19221326_00
Video_Telephony_2_5_35575_0
Shared_Modules_1_01_19221333_00
HTCFramework_1_5_19223320_00
Volume_Control_2_2_20113221_00
Contact_Picker_1_0_20113132_00
HTCFont_Link_1_0_19132133_1
Contact_Utility_Engine_1_2_20113727_00
Concurrence_Mgr_1_5_19221227_00
Resource_Proxy_1_0_19221124_00
SharedResource_1_0_20111720_00
Phone_Canvas_Enhancement_4_2_51720111829_0
New_Contact_Card_1_1_20113729_0
2'nd pack http://www.multiupload.com/1D9Z6NCUJK
Manila_2_1_19193517_0
3'rd pack http://www.multiupload.com/R1BXPVJFQV
Album_3_2_20113921_0
CommManager_2_9_U_0 with 12 functios
INSTALATION INSTRUCTIONS
1.Copy files to windows folder
2.import registry with your preferate reg editor
3.REBOOT AFTER INSTALL
you can also delete panel manager and stop slideview to get sime speed
go...go...go...jer.
THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
I've got a X2 fromm vodafone and is unsoportable. We're waiting for your work.
jerpelea said:
Since there is no SSPL or HARDSPL for X2 we dont have any option on making custom roms
i have started porting latest manila 2_5_2012 to x2
works fluent
i plan to make cabs for all htc apps that come with latest htc devices
if you like my work you can buy me an beer
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4300696
Click to expand...
Click to collapse
The best news recently!
I have "tasted" the 6.5.2 update of X2 in some phase, I really liked it. I'm sure the 6.5.3 update combined with manila will make X2 to become the most comfortable gadget for my personal needs.
Many thanks for your efforts jerpela!
Great news, highly appreciated!
phone dialer ported
i will upload it tomorow
uploaded manila with split languages
copy only manila and your language to windows folder
inport registry with your favourite reg editor
landscape is enabled
looking good, any chance you can upload the lang files for the Dialer ?
Im using a nb-NO lang ( Norwegian Bokmål ) , so that the dialer will display stuff. Or is there a way to force it to use the English one ?
Giland said:
looking good, any chance you can upload the lang files for the Dialer ?
Im using a nb-NO lang ( Norwegian Bokmål ) , so that the dialer will display stuff. Or is there a way to force it to use the English one ?
Click to expand...
Click to collapse
for any other file than english you need to rename all 409 files to your country code
this will display english mesages !!!
if you want native language you have to translate yourself
I don't know if my problem has anything to do with FW revision (R1AD006).
First of all somehow registry import didn't work for me, only some registries were imported out of all I can see in the reg files. Then I made cabs of them and installed and all of them seemed to appear.
After this I was very happy when sence appeared on my X2! But then the problem came: in every 1-2 seconds the empty today screen blinked in.
I did a soft reset, then a hard reset and installed it right after again. But didn't solve the problem. And noticed that after maybe one minute the blinking turned into pulsating, empty today appeared more frequently but for lot shorter times.
I don't know what can cause this, any idea?
As much I was able to test it it seems to be quite fast!
bazsikar said:
I don't know if my problem has anything to do with FW revision (R1AD006).
First of all somehow registry import didn't work for me, only some registries were imported out of all I can see in the reg files. Then I made cabs of them and installed and all of them seemed to appear.
After this I was very happy when sence appeared on my X2! But then the problem came: in every 1-2 seconds the empty today screen blinked in.
I did a soft reset, then a hard reset and installed it right after again. But didn't solve the problem. And noticed that after maybe one minute the blinking turned into pulsating, empty today appeared more frequently but for lot shorter times.
I don't know what can cause this, any idea?
As much I was able to test it it seems to be quite fast!
Click to expand...
Click to collapse
1.import patch.reg
2.reboot phone
if is not working try
1.backup HKLM\Init
2.delete lines with xkey,panelmanager,SlideView
i am using it on 006 for 2 days without any glitch
yes is fast
jerpelea said:
1.import patch.reg
2.reboot phone
if is not working try
1.backup HKLM\Init
2.delete lines with xkey,panelmanager,SlideView
i am using it on 006 for 2 days without any glitch
yes is fast
Click to expand...
Click to collapse
2nd option worked, thanks! Now testing.
How meny of you have installed this on your X2.
Im trying and trying, but it looks like im mising something.
I have copied ewerything under the windows folder
and i can find only one reg entery calld manila.
What to do?
I realy wana make this work.
Help!!!
By the way grate post.
Just go ON
Sory but my English
ndjorovic said:
How meny of you have installed this on your X2.
Im trying and trying, but it looks like im mising something.
I have copied ewerything under the windows folder
and i can find only one reg entery calld manila.
What to do?
I realy wana make this work.
Help!!!
By the way grate post.
Just go ON
Sory but my English
Click to expand...
Click to collapse
Try to install these.
The bkinking still occurs after pushing slide view key once or twice.
I have other issues also but before sharing them maybe I should try patch.reg but it doesn't work.
Error message comes "line 302 - unsupported DirID 1" (HKCR) and line 234 in HKLM.
Besides it's very good feeling to have manila on X2. Now I won't feel to change back to X1 every now and then.
Hello, is possible to make/upload a cab for installing manila?
I am not sure with registry skills and copy and paste files to Windows folder is impossible with no free space message. Thanks
marcuchinonis said:
Hello, is possible to make/upload a cab for installing manila?
I am not sure with registry skills and copy and paste files to Windows folder is impossible with no free space message. Thanks
Click to expand...
Click to collapse
First I had to uninstall some apps when i tried it before hard reset. I don't know if you use SE User Guide (it's 4-5MB) or pixel city panels.
I am not an expert at all either, only trying to discover registry things, just managed to make the attached 2 cabs of jerpelea's all.reg and manila.reg and manila works after installing them.
I encountered some problems in the People tab.
When I click the All People button Manila restarts, the same thing happened when I click Updates & Events in a contact...
Is there any way to solve this?
Same here. i have problems with people tab, media tab, music tab.
Manila resets every time i try to change something + i cant import pictures or music files.
how to fix this unstable state of otherwise great MANILA!!!
Thanks!!!
ndjorovic said:
Same here. i have problems with people tab, media tab, music tab.
Manila resets every time i try to change something + i cant import pictures or music files.
how to fix this unstable state of otherwise great MANILA!!!
Thanks!!!
Click to expand...
Click to collapse
you need to copy all packages and install regs
not just 2