Installed and working on Kaiser WM6 !
Manual install process :
1. Unpack the attached ZIP file with subfolders.
2. Copy all the files to the appropriate folders on your PDA.
3. Change the registry according to the attached registry.txt (change 2 keys and create 4 new)
4. Completely turn off your PDA (to renew the registry). Reset button does not work.
5. Switch the device on.
6. In order to enter the PIN code do: Start -> Settings -> Phone -> Enter your PIN
Now you have an Avaya One-X as a dialer.
Do not forget to fill settings.ini with your own settings.
Enjoy !
baudy2 said:
Installed and working on Kaiser WM6 !
Manual install process :
1. Unpack the attached ZIP file with subfolders.
2. Copy all the files to the appropriate folders on your PDA.
3. Change the registry according to the attached registry.txt (change 2 keys and create 4 new)
4. Completely turn off your PDA (to renew the registry). Reset button does not work.
5. Switch the device on.
6. In order to enter the PIN code do: Start -> Settings -> Phone -> Enter your PIN
Now you have an Avaya One-X as a dialer.
Do not forget to fill settings.ini with your own settings.
Enjoy !
Click to expand...
Click to collapse
What is it? A phone dialer??? I've never heard of it before. Any screenshot?
Can you provide any screenshots???
It looks like a VOIP client
http://www1.avaya.com/campaign/demo/one-x/index.html
could you please provide more info on Avaya one-x? what are the benefits of running this?
thanks!
I believe you need an Avaya VoIP system to get the one x client to work. I know they had a version for thier IP Office system but I don't think they ever updated it to run on WM6
Guys,
This is an application for WM which replaces the standard phone dialer and in addition to regular WM phone functionality it allows:
1. Manage your desktop office phone directly from your mobile
2. Make all operations like call forwarding, EC500 management, etc directly from your mobile.
It requires to have an Avaya VOIP PBX installed at your office.
Without it, it does not make sense at all.
Hi
We have an Avaya VOIP PBX installed at our office..
Could please tell us to connect HTC Touch Cruise wm6!
We have tried everyway we could, and read every document available on avaya support page, with no luck.
thank you in advance.
sortlaih said:
Hi
We have an Avaya VOIP PBX installed at our office..
Could please tell us to connect HTC Touch Cruise wm6!
We have tried everyway we could, and read every document available on avaya support page, with no luck.
thank you in advance.
Click to expand...
Click to collapse
Look on Avaya's website and see if thy have the client available to dowload. Last time I checked it was for WM 2003.
I'm having some trouble with a shortcut on the Start Menu. I had a link to Resco File Explorer which worked fine, but then stopped working following an upgrade of the application (I suspect the upgrade process removed it some one storage area and stuck the new version in the other, or something like that). Clicking the shortcut now does nothing.
I also had it linked on the TF3D Programs Tab. This I've managed to remove and re-add using the normal interface and now works fine. However if I go to edit the start menu I can see TWO entries for Resco File Explorer - one that is ticked with a duff icon, and one which isn't but with the correct icon. By problem is that if I try and untick the duff one it errors "Cannot move that item".
Any ideas??
uninstall and reinstall. if you have an older version and upgrade, try downloading the upgraded cab and install that.
In File Explorer, go to My Device > Windows> Start Menu. Tap and hold on the inoperable shortcut and select "delete"
akash_84 said:
In File Explorer, go to My Device > Windows> Start Menu. Tap and hold on the inoperable shortcut and select "delete"
Click to expand...
Click to collapse
Excellent - many thanks - job done!
(easy when you know how..
I am posting this info because I need some assistance in getting it to work perfectly I was hoping some of you out there may have some additional insight! thank you
Known Bugs/Issues
1. Incoming Call are directed direct to Voice mail
2. Speaker and Mic are defaulted to off you must enable
3. headset is default off you must first enable speaker then plug in headset
4. if any sound is activated while on a call Headset, Speaker, Mic are automaticly Disabled
HTC SHIFT FULL PHONE
I don't think it is currently need but I have also inclued the hardsspl for CDMA
Be careful with the RealVGA bit if you haven't got an English machine - I have so I couldn't test this bit - I inferred the solution from one of Daniel's posts.
1. Reset SnapVue if you have been hacking it.
- Run Clearstorage.exe (or Settings, Clear Storage)
- Disable Wi-Fi in Vista (Communication Manager)
- Enable Modem
2. Get Access to WM6
- In SnapVue, click Outlook E-mail
- Click Menu,New
- Click Menu,New,Insert Picture
- Where it says "My Pictures", click and navigate to "Windows" directory
- Highlight (using arrow keys) the "Start Menu" directory and copy it (using ctrl-c)
- Navigate into "Settings" directory in "Windows" and paste (ctrl-v). Ignore the calendar error.
- Click Ok and go back to SnapVue.
- Click Settings button and then "Start Menu, Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Using "Tools, Folder Options" (alt T,O), click on the View tab and make sure that "Hide protected operating system files (Recommended)" is NOT enabled.
- Copy "RegistryEditor.exe" to "Pocket_PC,"\" directory.
- Still on Vista side, Using "Communication Manager", Click "Advanced Settings" and then "Reset Snapvue". Click OK.
- Switch to snapvue and wait for it to start up. If you miss the warning to allow running "RegistryEditor.exe", don't worry - click setting, Start Menu, Programs, File Explorer, then navigate to Windows, StartUp and run it from there.
- In RegistryEditor.exe, navigate to HKEY_LOCAL_MACHINE, Services. Delete the "SnapVue" entry. Click and hold the "SnapVue" entry until the context-sensitive menu appears, then select delete.
- Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
- Close RegistryEditor.exe.
- In File Explorer, delete the PKG.exe and BlockTitleBar.exe files from the Windows\StartUp directory.
- Switch back to Vista and reset snapvue from Communications Manager's Advanced Settings.
- Switch back to SnapVue. When it has finished starting up and you have closed RegistryEditor, you will notice that you have the start menu at the top left of the screen.
- Tidy up - reset and delete "Start Menu" from the "Windows, Settings" directory
Pat yourself on the back! You have successfully converted the HTC shift's SnapVue to WM6.
2a. Enable all the hidden "Today" items
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- In Vista, install and run ceregedit_setup.exe
- Press F1 to connect to WM6
- Use Tools, Unlock Registry to enable the import
- Use Edit, Import to import "today.reg". Ignore any errors.
- Close ceregedit
- Switch to WM6
- In "Start Menu, Settings, Today, Items", pick the today items you want to display.
3. Change the display resolution to 96 dpi (BE SURE THAT THE CHECK BOX FOR DISABLE PHONE SKIN IS CHECKED)
A word of warning - this version of RealVGA is English and does not work very well with non-English systems.
- If you have a non-English version of the Shift, then you will not have a directory called \Windows\StartUp. Before doing the rest of this section, you should create a "StartUp" directory in your Windows directory and copy all of the files from your language equivalent of StartUp.
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Copy "RealVGA_11.CAB" and "ResPack96dpi.ARM.CAB" to "Pocket_PC,"\" directory.
- Switch over to WM6
- From File Explorer (Start Menu, Programs, File Explorer), navigate to the top directory (using Up button as necessary)
- Install RealVGA_11.CAB accepting the security warning
- Install ResPack96dpi.ARM.CAB accepting the security warning and select ok to restart the system
- Run RealVGA from Start Menu, Programs
- Change to 96dpi and press OK and wait while the system restarts
- Tidy up - Using "Start Menu, Settings, System, Remove Programs" remove WM6_RealVGA (its job is done)
- In File Explorer, delete the 2 CAB files.
hkey_local_machine\system\state\phone
block voice MO call Change Registry from 1 to 0
CONGRATULATIONS!!!!!
Voice Calls are now enabled with working mic and speaker through headset also speaker phone works
1. Incoming Call are directed direct to Voice mail
2. Speaker and Mic are defaulted to off you must enable
3. headset is default off you must first enable speaker then plug in headset
4. if any sound is activated while on a call Headset, Speaker, Mic are automaticly Disabled
Side Note: you may want to also adjust these entrys as well
these will give you access to the phones menu options
hkeylm\software\oem\phonesetting
change all keys that begin with hidden from 1 to 0
hkeylm\controlpanel\phone
delete the Redirect key
Here's a link for everything you need
http://rapidshare.com/files/236022979/CDMA_Shift_Phone.rar.html
http://rapidshare.com/files/210940637/CDMA_Shift_Phone.rar.html
'This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.'
Link is down. Only ten downloads till it expired. Please post to a premium rapidshare account or send the download link again and I will post for you.
link has been updated
cybericebyte said:
link has been updated
Click to expand...
Click to collapse
Thanks much, downloading now !
Trashed Snapvue
I ran the CustomRuu from the zip file you posted, and managed to get into a loop where Windows Mobile will not boot. I can get into the bootloader with tools I downloaded on XDA, but have not found a ROM that will install without an error. Do you have a CDMA compatible ROM or even the original ROM that comes with the device. Will dive into the box to see whats on the disks next.
Need help though.
the orginal rom should be included in the zip folder
ShiftCDMAFLASH is the folder that I flashed (successfully) that left me in bootloader (three color screen).
RUUNBh is in the upper middle of the screen
CLI 0200
SPL 0.14.000
appear below, and USB in a white box appears below that.
The ShiftCDMAFLASH.zip file contains a different nbh rom file from the folder above, but I cannot get past 0% on the loader screen. I have used ecshift.exe -bl to get back in bootloader mode and hard resetted the Windows mobiel side, but no luck yet. Any suggestions ? +
just give it time
The 0.19 nbh file give a 262 error
On the other hand I can flash the 1.14.651.1 Rom with no trouble but I reboot (even after a hard reset) into the tri color screen with USB on the screen as listed above. Stalled in this mode.
Any other options ? or roms that might work. The GSM roms on XDA also crash out so I am locked in the 1.14.651.1 bootloader mode.....grrrr.
Is there another option I am missing ? I also tried the Snapvue reset program for Vista from the HTC website
Snapvue Software version 1.14.651.1
Snapvue Software version 1.14.651.1 is the one that I installed on my CDMA shift and now cannot get out of bootloader screen (tricolor) despite hard resetting the WM side. I am able to reflash the above listed rom with no errors. But still end up in the bootloader screen.
No other posted rom on XDA will load (probably due to GSM/CDMA differences). Do you have an alternative CDMA rom I could use or is there a way to get out of the bootloader and force WM to load that I am missing ?
use mtty should be posted on site
Used mtty
Thanks. I had been usimg mtty. I can successfully hard reset but WM boots back into the tri color bootloader screen following hard reset. lol. Still stuck. Thanks for the suggestion though.
now do ecshift mode 0 then mode reset
cybericebyte said:
now do ecshift mode 0 then mode reset
Click to expand...
Click to collapse
Thanks, I have been doing all of the above. Restarts into the tricolor screen. I can reformat with the rom you provided. Still tricolor on hard reset. Something in the rom is preventing wm from loading. Anything else left to do ?
I am probably going to need to give up. The snapvue side is toast. Unless there is someone with the original CDMA Rom out there willing to post online (even HTC) I do not think I can make this work.
Original CDMA ROM
Hello, I had exactly the same problem, my SnapVue stood in bootloader...
CMONEX gave me a ROM for CDMA Shift (I think is the original), it worked for me
you can download it from here:
http://srmpro.gas.pemex.com/video/R....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
this link wont be available forever, if you can download and upload it to a site like megaupload it will be great!
hope this helps
rafaelc said:
Hello, I had exactly the same problem, my SnapVue stood in bootloader...
CMONEX gave me a ROM for CDMA Shift (I think is the original), it worked for me
you can download it from here:
http://srmpro.gas.pemex.com/video/R....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
this link wont be available forever, if you can download and upload it to a site like megaupload it will be great!
hope this helps
Click to expand...
Click to collapse
Quick response thanks. Will try it out today and post my results. I did download and reupload to rapidshare. Here is the link.....
http://rapidshare.com/files/2374198....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
I hope CMONEX is okay with that.
Was able to get Snapvue up and running with the exe file listed above. Did not need to do anything else. Thanks for posting. Will need to be more careful when testing new roms.
nmhusa said:
Was able to get Snapvue up and running with the exe file listed above. Did not need to do anything else. Thanks for posting. Will need to be more careful when testing new roms.
Click to expand...
Click to collapse
Excelent!
you are right, but that kind o things is part of the learning process
Thanks again for all the help.
Also managed to fix the Font sizes in Snapue via registry edits so that they increase in proportion to the scaled screen resolution with RealVGA. Until I figure out how to HardSPL the CDMA Shift and cook a custom rom, this will have to do.
Well for me my SD Card doesn't want to work while on RC29 so I have to wait for the stupid automatic update.... SIKE!
Here are the steps to manually check for updates using your Dream/G1:
1. First, have AnyCut installed if you don’t already
2. Next, Create a new shortcut on your phone’s desktop. Select “AnyCut” and then select “Activity”
3. Select “Device Info” as your activity. I can’t find any other way to get to this activity on the phone
4. Press the new shortcut icon you have created.
5. Scroll to the bottom and find the “Check for Updates” button. Click it. You may have to a few times for it to succeed.
6. Once the “checkin” has succeeded, exit back to your home screen and you will be prompted to install the update.
Wait for it to finish download then go to home screen.
-I did not create this guide just feeled like sharing it with yall. Here is the original post. Hope it helps you like it did to me!
http://forum.xda-developers.com/showthread.php?t=803682
go to the above link and download the latest version of this app called SuperOneClick. The newest version should be at the bottom. download the program to your computer. Unzip the file and extract whats inside. Once this is done open the folder where the files have been extracted to and run the application that says SuperOneClick. In there you should click the first button which says ROOT. Let the program run and do its thing.
if you do not get any errors.. restart your phone.. there should be a couple of new apps there.. one being superuser and another being ROM manager. both are very important. you should now be rooted! (basically same as jailbreaking iphone, or unlocking any phone)
If ROM manager isnt there, go into the market and download the free version. once this is downloaded open the application and in there you will see a button (first button up top) that says "flash ClockWorkMOD recovery". If that tells you that the recovery image has been flashed you are good to go!
certain things are going to ask you for superuser permissions.. a black screen will pop up asking for these permissions.. always click yes... and make sure the remember box IS checked that way it will only ask you once not every time you access that program.
SECOND: You should download a ROM of your choice. i chose to go with bugless beast rom. it is awesome. if you want this ROM you can go to this link ( http://www.droidforums.net/forum/bu...bugless-beast-v0-6-2-1-gingerbread-froyo.html ) and click one of the mirrors to download. this file will also be in the form of a zip file download this to your computer BUT DO NOT UNZIP OR OPEN IT. plug in your phone to the computer via the usb cable and when it asks what you want to do click "open to view files". this will give you access to all files on your SD memory card. so now once you have the folder open.. open the folder where you just downloaded the attached file. the name of the file is "frg83dv062.zip" ... once both windows are open, take the zip folder from the download folder copy it to your SD card.
once this is done (should take 30 seconds to a few mins) you can unplug your phone.
Turn the phone off.
wait a couple of seconds... then restart your phone by holding X on the slideout keyboard and the power button at the same time.
This will start you in recovery mode.
in recovery mode you will see a list of options:
reboot now
apply sdcard:update.zip
wipe data/ factory reset
wipe cache partition
install zip from sd card
nandroid
partition menu
advance
using the directional pad on the slide out keyboard scroll down to nandroid. it will ask you to create folder just click ok. then click yes. This will back up everything on your phone so that you can always go back to it.
once this finished on the slideout keyboard hit the delete button to go back. Then scroll down to install zip from sd card. this will bring up all files on your sd card. Scroll down until you find the file frg83dvo62.zip. click ok. and it will give you a list with like 10 things that say no n 1 that says yes. click yes. n let it do its thing. once this is done go back and click reboot now. it will take a few mins to load on the reboot because its a total change in looks and framework so let it do its thing.
NEXT: setting up for some optimum speed tweaks.
download a kernel. my kernel i chose to go with is p3droids low voltage 1200 kernel but you can choose any one you want. this can be found here: http://www.p3designs.info/kernels/ .. download this to your computer BUT DO NOT UNZIP OR OPEN IT. again plug in your phone to the computer via the usb cable and when it asks what you want to do click "open to view files". this will give you access to all files on your SD memory card. so now once you have the folder open.. open the folder where you just downloaded the attached file. once both windows are open, take the zip folder from the download folder copy it to your SD card.
once this is done (should take a few seconds) you can unplug your phone.
Turn the phone off.
wait a couple of seconds... then restart your phone by holding X on the slideout keyboard and the power button at the same time.
This will start you in recovery mode.
in recovery mode you will see a list of options:
reboot now
apply sdcard:update.zip
wipe data/ factory reset
wipe cache partition
install zip from sd card
nandroid
partition menu
advance
using the directional pad on the slide out keyboard scroll down to nandroid. it will ask you to create folder just click ok. then click yes. This will back up everything on your phone so that you can always go back to it.
once this finished on the slideout keyboard hit the delete button to go back. Then scroll down to install zip from sd card. this will bring up all files on your sd card. Scroll down until you find the 125-1200-v32kernel.zip file. click ok and then scroll to yes. this will install a new kernel. aka make the phone faster and have better battery life.
restart phone normally.
last thing you really need is a program called setCPU which will change things with the kernel making it either faster or slower. click this link ( http://forum.xda-developers.com/showthread.php?t=505419 ) scroll to the bottom of the original post and download the latest versionn.. setCPU v2.10.0.zip.. download it to your computer. open it!.. inside you will find a file that has an ending of .apk. again plug your phone into your computer and open to view files. click the file ending in .apk and drag it to your sd card INTO A FOLDER NAMED downloads. once done unplug and you are good to go. a couple good applications you can use to navigate through your sd card are es file manager or astro file manager both available for free in the market. This will allow you to look through all of you files on your sd card. go into whichever program you prefer and go to the downloads folder. click on the setCPU apk and it will popup saying either browse file or open app manger. click open app manager and then click install.
once this is installed you can set it up like this: it will ask you for superuser permission click yes.
once it is opened it may give you the options to autodetect device. if not hit the menu button on your phone and hit device selection scroll down to autodetect device. it will detect your kernel. You can set the options however you want but i set the options up like this:
max :900000
min:125000
scaling: ondemand
set on boot CHECKED
click profiles: check the box for enable
click add profile
profile: screen off
max: 500
min:125
profile: battery <30%
max: 700
min: 125
profile: temp >40degrees Celsius
max: 500
min: 125
next go to advanced tab
click set on boot box.
sampling rate: 100000
Up threshold: 90
ignore nice load: 0
powersave bias: 0
restart the phone and you should be golden!
Any questions feel free to ask and ill try my best to answer.
Works!
Confirmed working on FRG83G (2.2.2)
However, it was necessary to install motorola drivers first (www.motorola.com/support)
I need to add this post to my favorites. Now that I have finished experimenting on Sony Ericsson XPERIA X10 Mini Pro, Motorola Droid is my next "victim."
This is great. This is my first time doing something like this. Been considering it heavily. Now this makes it real easy. Can someone recommend overclock settings for Moto Droid?
Edit: never mind. guess i cant read very well. see his recommended settings. but I guess I would still like to ask what overclock settings everyone else is using. are his good, or should I go higher. Already notice it runs a good amount faster which was my huge complaint about the Droid since the 2.2 update.
Also. had issues installing the custom ROM, just installed the kernel. Read in other places about having to clear data/cache at some point. not exactly sure at which point to do this, could someone help me? because I tried to reboot it after installing it and is just sat loading for at least 15-20 mins before I had to pull the battery. The guide says it takes a few minutes, but I know it doesnt take That long.
Finally getting around to doing this and found out that the clockworkmod isn't available for 2.1 anymore. Anyone got an old .apk that I can install (the new version gives me the parse error)?
sweet thx!!!!