Database Develop

Any body can help me cause my K-jam is dead pls

Any body can help me cause my K-jam is dead pls
my pda i dont have GSM
ipl 2.16
spl 2.16
No gsm Ican't show is empty
Os 2.16.9.1
pls Any body good man help me i'll cry

you need to try to enter bootloader and reflash with a factory or good working rom...
HOWTO enter Bootloader:
hold the "camera" (bottom right) and briefly press the reset button, do not release "camera" until you can see the multi-color screen, connect USB cable, and start to re-flash the ROM

HELP!!! Cannot enter 3 color Update mode any more !!!

Hi everybody
i use a
Orange SPV 3000 cid/sim unlocked
WM 6 NBD 7.3
IPL / SPL 2.26
GSM 02.25.11
OS 5.2.1413 (Build 17913.0.3.0)
Now i tried to go back to the latest German ROM Update provided by ORANGE CH.
(RUU_Prodigy_21611_2161111_010410_OR_CH_GER_Ship.exe)
The Update Process start's on the PC Screen and remains on 0% and will terminate with ERROR [260]: UPDATE ERROR
The Phone hangs and cannot enter in "3 color update mode".
I have to take out and reinsert the battery to bring the Wizard back to Work.
Then the Wizard start's up and you can work without any Problems. (Exept you have to set the Date / Time again it is set to 2006-02-14 12:00)
Next Steps
- did a Reboot on the PC and the Wizard -> Same Result
- tried to Flash NBD 7.3 ROM again -> Same Result
- did a Hard Reset (press the 3 Buttons on Reset then Send Button ) and tried to Flash again -> Same Result
- tried to manualy enter Update mode (press Camera Button on Reset) with the same Result the "3 color update mode" will not appear
Has anybody a Idea what else i can do?
Tnx in advance for any HELP

when manually entering bootloader mode are still holding the camera button in after the reset button is released? I usually hold for about 5 seconds after the reset button is released. im sorry if that don't work for you. never heard of anyone having trouble not getting into bootloader before.

mdajunkie said:
when manually entering bootloader mode are still holding the camera button in after the reset button is released? I usually hold for about 5 seconds after the reset button is released. im sorry if that don't work for you. never heard of anyone having trouble not getting into bootloader before.
Click to expand...
Click to collapse
dear mdajunkie
now i can enter bootloader mode manually
looks like i did not hold the camera button long enough before
thank you very mutch for your HELP
I assume the Problem is locatet on the PC and have to find out why i can't flash my Device again.
Recently i changed something on the PC - I installed a external BlueTooth-Dongle from MSI including the MSI BlueTooth Software
Starting now with the easyest step - reinstalling Active Sync 4.5 and try again.
Regards

Now everything works fine
I tried to Flash a ROM and it work's
i did not change anything exept entering the bootloader mode manually once.(no reinstall activesync or deinstall bt software !)
May be entering the Bootloader Mode manualy "cured" my PDA?
i don't know
Regard's

im glad you got it to work. Most important thing is to read make sure you know how to and are confident enough flash roms. Makes things a whole lot easier. Atleast that way if something goes wrong you will be able to backtrack a lot easier and maybe explain your situation a whole lot better. Hope everything else goes wonderful for you and have fun man.

big problem i my wizard G4 !!!!!!!!!!!

Hi all,
plz ,i have a big problem in my spv-m3000 G4
i flashed it with wm6 tnt 4
and it work normally ,after that i flash it with other wm6 rom and it stop flash in 99% ,then i reflash with other original rom and complete flash normally in boot after splash screen ,i dont know how i press reset then the device won't start
now only in charg if i remove the battery the red led on for one second
plz help me because in my country there is no repairing service for this model​

Can You access Bootloader? Tri colored Screen with IPL and SPL info
Some Wizards have an operator Flash screen which overrides the Flash screen that's supposed to show the IPL and SPL versions. In this case, you can try to enter the bootloader (by resetting the device (by pushing the stylus into the reset button at the right of the device) and then holding the camera button). This is from the Wiki for the Wizard

Tweakecho said:
Can You access Bootloader? Tri colored Screen with IPL and SPL info
Some Wizards have an operator Flash screen which overrides the Flash screen that's supposed to show the IPL and SPL versions. In this case, you can try to enter the bootloader (by resetting the device (by pushing the stylus into the reset button at the right of the device) and then holding the camera button). This is from the Wiki for the Wizard
Click to expand...
Click to collapse
thanks for reply
but the device don't start u have another idea like j tag or ??????????

any one help me plz

Boot screen freze

Hi
my Charmer freezes during the Bootprocedure (IPL SPL GSM OS is showing)
I tried to upgrade to Charmer WM 6.1 by ChrBeck but when the os file is written the connection cuts :-(
what should I do ??
Anywhen I used a safe mode but i don't know how to get there.
Does someone know how ???
Thanks for help

OK i figured i out just press the Camera Button after you pressed the reset button

help me about Olipro HardSPL 1.20

i have installed Olipro HardSPL 1.20 then i have installed wm 6.5 rom
and now the mobile could not boot
it goes to the splash screen and it stay at thes screen
what shall i do ?
can i remove (Olipro HardSPL 1.20)?
help me plz

Can it enter bootloader mode? Press and hold Power + Camera then press reset button. If it enters the multicolor screen and says Olipro 1.20 then try to install some other ROM. It may be that your ROM copy is corrupt.