Hi all,
plz ,i have a big problem in my spv-m3000 G4
i flashed it with wm6 tnt 4
and it work normally ,after that i flash it with other wm6 rom and it stop flash in 99% ,then i reflash with other original rom and complete flash normally in boot after splash screen ,i dont know how i press reset then the device won't start
now only in charg if i remove the battery the red led on for one second
plz help me because in my country there is no repairing service for this model
Can You access Bootloader? Tri colored Screen with IPL and SPL info
Some Wizards have an operator Flash screen which overrides the Flash screen that's supposed to show the IPL and SPL versions. In this case, you can try to enter the bootloader (by resetting the device (by pushing the stylus into the reset button at the right of the device) and then holding the camera button). This is from the Wiki for the Wizard
Tweakecho said:
Can You access Bootloader? Tri colored Screen with IPL and SPL info
Some Wizards have an operator Flash screen which overrides the Flash screen that's supposed to show the IPL and SPL versions. In this case, you can try to enter the bootloader (by resetting the device (by pushing the stylus into the reset button at the right of the device) and then holding the camera button). This is from the Wiki for the Wizard
Click to expand...
Click to collapse
thanks for reply
but the device don't start u have another idea like j tag or ??????????
any one help me plz
Related
Any body can help me cause my K-jam is dead pls
my pda i dont have GSM
ipl 2.16
spl 2.16
No gsm Ican't show is empty
Os 2.16.9.1
pls Any body good man help me i'll cry
you need to try to enter bootloader and reflash with a factory or good working rom...
HOWTO enter Bootloader:
hold the "camera" (bottom right) and briefly press the reset button, do not release "camera" until you can see the multi-color screen, connect USB cable, and start to re-flash the ROM
I have flashed this rom to my fone ok.
it started up, synced with a/s 4.5, evrything was ok.
i did a soft reset and now i cant get past the green windows mobile screen.
the green light is flashing and the start/end call buttons light up.
it wont turn off on the main power button, will only soft reset.
any ideas??
kieron
...it also lights up if you ring it.
it doesn't just go straight to answerfone as it would if it was swiched off or out of signal, so it must be connecting to the network....
Go to Bootloader (Hold Camera-Button + Reset) and flash ur operator Rom back!!!
sorted!!!
cheers dude
damn poxy fone
will not go to bootloader
any other ideas please?
ipl 1.01
spl 1.01
shows loading windows screen and that all...
os 3.3.0.0
most of the aku 3.3 roms require that you load a 2.* ipl spl rom first, then load the aku 3.3 rom.
Who can help me, ..... please.
During the upgrade of my Herald the process stopped around 3%. I only could exit the application but my Herald doesn't boot anymore. Who knows how i can get my device working again.
Thanks upfront
jeijt said:
Who can help me, ..... please.
I only could exit the application but my Herald doesn't boot anymore. Who knows how i can get my device working again.
Click to expand...
Click to collapse
Do you get it to boot into the bootloader?
(* Press and hold the camera key, then press the soft reset button. *)
If so, you can try to use it and apply the original firmware.
Monarch73 said:
Do you get it to boot into the bootloader?
(* Press and hold the camera key, then press the soft reset button. *)
If so, you can try to use it and apply the original firmware.
Click to expand...
Click to collapse
It seems I get into bootloader 4 bars (red, green, blue and white)
Red: IPL 1.01.0001
SPL 1.01.0001
If I attach a USB kabel it says USB in the white bar
But where can I find de original firmware an how can I get it on the system.
i saw your other two threads about flashing from sd.
heres the thing. you need to use the RUU for your device. It depends on who you purchased your device from. If you have an HTC branded device, you will need the appropriate RUU etc etc...
heres the link. make sure you choose the right one.
http://wiki.xda-developers.com/index.php?pagename=Herald_Upgrades
I've upacked my shiny new XDA Ignito and followed the intructions to install HardSPL.
The TUT says:
<snip>
To verify if you indeed have correct HardSPL on your device, enter Bootloader by pushing the reset button while holding volume down key on the side.
It should display*:
* In case of another HardSPL, the version number would differ!
Code:
…
SPL-1.40.OliNex
</snip>
I don't see this - I just boot into the O2 welcome screen - the update took about 2 minutes - has it failed or is there anyway to confirm the HardSPL has taken? I don't want to install a new ROm until I'm sure I'm not going to brick it....
TIA
Peter
put your phone into bootloader mode and you will see that your SPL has changed to OliNex 1.40.
This information will not show on the normal splash screens.
to put your phone into bootloader you need to turn the power off on your phone, once the device is off, press and hold the volume down then press and hold the power button.
hope this helps
Hi
my Charmer freezes during the Bootprocedure (IPL SPL GSM OS is showing)
I tried to upgrade to Charmer WM 6.1 by ChrBeck but when the os file is written the connection cuts :-(
what should I do ??
Anywhen I used a safe mode but i don't know how to get there.
Does someone know how ???
Thanks for help
OK i figured i out just press the Camera Button after you pressed the reset button