Hi all. I just upgraded to Super Rom. Then My Wizard become very slow, no signal. And most TERIBLE PC could not recognize it by Active Sync any more. I've try soft and hard reset but no use. Pls help me
Whats your IPL/SPL version?
is this alsp happened to other ROM you tried?
G3 or G4?
It is G3. IPL is 1.05
It is ok for previous upgrade.
Please advise
You need to flash this with an official rom (like the TMobile 2.26 one. See the sticky at the top by Dr. P and it has the link to get this). Once you do that, you should have IPL/SPL of 2.26. Then you can flash custom roms.
Related
Hi all,
i've read a lot of threads on this forum and posted here and there but haven't got the answers I need to start messing with my phone.
could someone please help me out and give some advice?
I have a CID & SIM locked Dutch MDA Vario G3 with IPL/SPL at 2.21
I would really like to upgrade my ROM for getting rid of the tmobile stuff AND speed it up.
I'd like to know the following:
1) Can I upgrade a locked DUTCH vario to the Official tmobile 2.26 USA software without hacking or is this prevented as well?
2) I read stories about CID unlocking a G3 2.21 being possible AND being Impossible ..... which is it?
3) Can I downgrade my phone SAFELY to the custom ROM on this forum, I read about success stories but not for everyone .... what makes it work sometimes and does it matter that it will downgrade the IPL but NOT the SPL?
4) Can I or can I NOT just flash a G4 ROM over my G3 phone and leave the locked IPL/SPL as it is?
5) is there a disadvantage to NOT unlocking it and just flash a G4 ROM? what would I be missing out on? can I upgrade to 2.26 official and then flash a G4 ROM and have the same end result?
please help me out on this, I am ready to flash my phone but would not like to brick it since it is just a month old.
thanks a lot! stefan.
i trie craptree's guide, and I can read back all relevant data from my locked vario, at 2.21 I just can't write it back, so that's a nogo either.
any advice? G4 ROM or downgrade?
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
you say with the wm6 oficcial there is not a official rom for wizard tellme what rom do you used
AndyG said:
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
Click to expand...
Click to collapse
I bet you went from 1.02 to 3.08 without stopping at 2.xx
Maybe that's the cause?
but he says than he flashed with the oficcial rom there is no oficcial are agree
Hi Guys,
Thanks for the quick replies.. I used
http://forum.xda-developers.com/showthread.php?t=310954
( about quarter way down it says official download site for WM6.0.0)
Mestrini - Yes i went straight from 1.02 to 3.08 coz i cannot find the V2.xx IPL/SPL files but i have found the updater solely for the IPL/SPL to 3.08 which is what i used.
is that any use ??
flash your phone with the tmobile 2.26, that should correct your issue. It will also give you the 2.26 version of spl/ipl
ok if you had a cid unlocked device search in the forum for the t-mo 2.26 ipl/spl after you can update for the rom as you tell
en joy it
Thanks for the advice guys, ive tried several different roms and i have a consistent problem where it will not let me change the rom as ( i think ) my SPL version is still 3.08 and every ROM bombs out with "this is an upgrade only"
help me downgrade my IPL/SPL back to 1.02 pleaseeeee
cheers.
Andy
jb007jb
Junior Member
Join Date: Jul 2007
Posts: 6
Default Do Not Upgrade To 3.08 !!!!!!!!!!!!
Hi,
i have T-Mobile MDA and Im stuck with spl 3.08
I did everything.......... and I mean EVERYTHING and nothing helps me bring back my MDA to the original T-mobile software or downgrading the SPL.
1. Downgrading my IPL to 1.01 (using button rom)
2. Unlocking CID with lokiwiz (successfully)
3. Running button rom again
The SPL still stays 3.08 after doing the above...
If there is another way to downgrade the SPL 3.08, please let me know. I really need the T-mobile original rom version.
Thanks so much.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Reply With Quote
Click to expand...
Click to collapse
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
Thanking everyone who has taken the time to contribute
Andy. ( looking hopefully around too ;o) )
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
Click to expand...
Click to collapse
Thats your problem, reflash the 1.02 rom again, both IPL and SPL have to be the same.
hey nottoosmart
i know... i need to find a way to drop the SPL back to 1.02 or thereabouts. i cant flash back to the T-Moblie 2.26 ROM coz it says my SPL is too high. i upgraded my IPL and SPL using a rom updater now whatever i try i cannot drop the SPL version.
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
...
Andy. ( looking hopefully around too ;o) )
Click to expand...
Click to collapse
Maybe, just maybe, the O2 ROM may help you. Please see http://forum.xda-developers.com/showpost.php?p=1379884&postcount=2 That post is from vippie - so you know that you can rely on it!
kernelguy
ok guys i f***** up my mda gets stuck at second splash screen the one that tells you ipl/spl and stuff
i was flashing a new rom using a prog called shelltool which i got from here as my device isnt cid unlocked i was using this rom
http://forum.xda-developers.com/showthread.php?t=403096
dunno whats happened but now its stuck and cant seem to get it sorted here are some details
ipl 3.08
spl 3.08
gsm 02.69.11
os 2.18.0.0
i have tried using a rom update utility but doesnt work, please help
You can always flash back to your MDA stock ROM.
After flashing back, flash to Button's ROM to downgrade your IPL and SPL and unlock your CID. However due to your IPL and SPL is at 3.08, there is a possibility that you can downgrade IPL to 1.01, however SPL stays at 3.08. In that case, try unlock CID using Wizard Service Tool (Actually you can also use WST if both IPL and SPL version are 1.01).
Note: Never use ShellTool ever. There are methods now that use RUU to flash your favorite ROM, both for G3 and G4. You should use those methods instead.
the same thing happened to me when I was very hesitant on cid unlocking my 838 . I use shelltool in flashing and was successful but when i decided to give another shot on a different cooked rom, it certainly did its job on flashing but never got pass on the IPL SPL screen.
then I follow Dr. P's guide (CID unlocking) then I successfully resurrected my 838 and now I can flash whatever cooked rom I want (given that it is for a G3 device)
btw, after flashing my 838 with the buttons rom, I use WST instead of lokiwiz
HTHs
thanks
thanks for your help guys got it sorted and cid unlocked now
just need a really good rom now
and the hunting begins
good to hear that try to look for a rom that will suit your needs. There is a lot of good roms here, just try to search what best fit you.
like I did, i have flashed at least 5 different roms in just a months time
Hello Forum
Hoping people can assit me with a issue i am having with upgrading my G4 Wizard to WM6
My G4 was on a T-Mobile ROM, which i then upgraded to the latest T-Mobile ROM which changed my IPL/SPL to 3.08 when before it was on a 2.XX.
I tried to upload a WM6 ROM when the flush just stalls on the boatloader and onscreen its shows that the ROM images is not compatiable etc...
i then flushed the ROM to a WM5 custom ROM which i found on the formum but searching for 3.08 ROM and tested and worked.
I then tried a WM6 ROM and still having issues, hoping someon can shed some light on this issue i have. I have checked the forums for this issue, but seem to be hitting a brick wall, and hoping someone may be help me kick the wall down.
PS this is my first thread, as i am a newbie,I have read about the different ROMs and how to flush a ROM, and how to check if the wizard is CID/SIM unlocked
Unlocked CID and SIM
IPL:> 3.08.001
SPL:> 3.08.001
GSM:> 02.69.11
OS:> 2.26.10.2
much appricated...
First, check again if your IPL/SPL version ends with 001 not 0001. If it is .001, then it is a G3, not G4.
If it is a G3, flash Button's ROM and use Wizard Service Tool to CID unlock it.
Or if it is a G4, flash with your original stock ROM and install HardSPL.
hi everyone
my friend have a unlocked wizard and i read here and folow the steps : http://forum.xda-developers.com/showthread.php?t=310831
everything was fine i finish the phone was ok
then i download a coocked rom, installed and this was the end when i started the phone he frezes. I try everything what i found here except the IMEI thing.
And now i can install any rom but cant use the device.
When i install the Button's 1.05 ROM the IPL/SPL is 1.01, T-Mobile 2.26 ROM the IPL/SPL is 2.26
somebody tell me what can i do
ps im shure that i read every thread but if i miss some please tell