Related
The new version of Bluetooth 1.6.0600 is now available at
ftp://xda:[email protected]/BlueAngel/OEM_WWE_160_600.sa.CAB
I have installed it but I haven't tried it yet. I had no problem installing the cab manually or directly from the Extended ROM.
Does any one knows which are the corrected bugs in this version and what's new? Why this new version number (from 1.0.3500 up to 1.6.0600)? It looks like a major release to me. I hope it DOES solves the problems we have with Bluetooth and our Blue Angels.
Enjoy it!
ArtZ
thanks for this really a nice update
I can't install it! :x
It says that a dll is in rom and connot be overwrited ...
(how do you install using extended rom??)
Thanks
I guess Bluetooth has to be be turned "OFF" when you install the update.
I had no problem to install it. I will play with this update tonight at home
ArtZ
I tried with it off, even put it in the startup dir but it says the same error ...
Yeah!
Occur the same thing with me!
Can anyone say the reason for this?
It will be because of the ROM installed on int?
My device configuration is:
Rom Version: 1.22.00 WWE
Rom Date: 10/22/04
Radio Version: 1.06.00
Protocol Version: 1337.38
ExtRom: 1.22.126 WWE
Thanks.
If it can help, here's my device info:
Rom Version: 1.22.00 WWE
Rom Date: 10/22/04
Radio Version: 1.06.02
Protocol Version: 1337.38
ExtRom: 1.22.557 WWE
Thanks!
Hi,
i have the same problem.
the dll is in use or in rom
Thanks.
I have installed the cab in two ways as follows:
First way: I copied in my SD Card the OEM_WWE.160.600.ca.CAB and I launched from there with the Bluetooth turned "OFF" and all other communication ports closes ( No active USB for ActiveSync and/or Wi-Fi) and I had no problem to install it.
Second way: I have unlocked the Extended ROM and put the CAB there deleting the previous BT patches from the Belgium Extended ROM ver.557 (OEM_124_008.ca.CAB, OEM_Patche_12100401.sa.CAB, then, I deleted the two lines to install these patches in the Config.txt file to replace them the new CAB) and I had also no problems to install.
Hope that helps.
Regards,
ArtZ
Hmm..
Well. I got the same problem..
The file "\Windows\ace_ddi.dll" is in use or is in ROM.
What to do?
I had more of a problem even out of the cradle so I:
Renamed the files in the \windows
(My Resco Explorer complained that it was unable to delete but it renamed them any way
ace_ddi.dll
ahioem.dll
AudioGW.dll
BtCeIf.dll
BtCeProfiles.dll
BtCeStack.dll
BTChooserLib.dll
BtPhoneIf.dll
btrez.dll
BTTrayCE.exe
FrontLight.dll
Keybddr.dll
Serial_BTUR.dll
Serial_Cmd.dll
Wavedev.dll
wbtapiCE.dll
Then I installed the Cab from \Storage\temp
Bluetooth Reports 1.6.0 Build 0600
I have not tested if it works
Has anyone tried this on an XDA II with 2003SE?
I'm tempted to install it if it works.
It Worked!! Had to renew a few more file but it is running now.
Thanks MDAIIIUser!
I have a Verizon XV6600 and tried this. For whatever reason it instantly makes the phone stop working. Also the Bluetooth starts but also instantly turns off with the following message: "The Bluetooth Radio failed to turn ON due to insufficent driver memory available. You must perform a normal reset before you can trun ON the Bluetooth Radio."
Before I install (and risk another Hard Reset and new System Setup) the key questions:
1) Does ist improve BT-headset voice quality or stability?
2) Does it include or work with the High Quality Audio Profile for the HP BT-Headphones?
3) What are the recognizable improvements over the 1.0.0.3500 stack?
Any answers available?[/list]
Before checking the forum again i made the same procedure described by MDAIII user .
I have tested with my HB60 headset and its working fine so far..
RE
Its NOT working on O2 XDA II with WM2003SE.
The whole thing hangs
:evil:
How do I make the dlls visible in order to rename them?
I would like to install this on an XDA II but I cannot see the dll files in the Windows directory.
How do I make them visible in file explorer so that I can rename them?
RE
Just go to File Explorer --> Windows and tap the screen and hold it there. A box will pop up and you'll be able to see 'View All Files'
Broadcom Bluetooth 1.6.0600 cab available here
Hi all
I did this update 3 times, the install went ok, but me BT signal
is not very good, it swings up and down..
Did this only happen for me ??
After I have tried a few weeks WM5 in different versions, I downgraded to WM 2003SE.
When I use the Extrom Tools I can see that there are a lot of CABs in that map. But they don't install. Noty even after a hardreset. It doesn't make any difference if I lock; unlock; hide of unhide the map. In my device information the field 'ExtROM version' is blanc.
The XDA is working perfect and it's also possible to install seperate CABs.
Who can give me a hint how I can solve this problem?
O2 XDA2S
1.40.00 WWE
03/10/05
1.12.00
1337.42
Some WM5 versions use extrom like WM2003 in separate partition, but some of them uses a folder in SD card for extrom
Use the "cabinstaller" programm in WM2003SE.
Search this keywords on yahoo and google. :wink:
Hi all, i've installed WM5 on my blue angel, but i was unable to resize the storage card to 60 mb (i would to make it), because everytime i try to launch on my device resize_doc.exe, i receive the following error:
FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed.
this happens on both wm2003 (before upgrade) an WM5 (after upgrade).
How can i resize my storage card?
PS: after the installation a new drive named TEMP DISK has appeared? What is this?
Thanks
No one can help me?
wm2003
use the tool on wm2003. Downgrade to 2003 then use tool to format....then upg to WM5
Re: wm2003
ralpheboyo said:
use the tool on wm2003. Downgrade to 2003 then use tool to format....then upg to WM5
Click to expand...
Click to collapse
I've used the tool on wm2003 before upgrading, returning that error...
what size
what size r u looking for to have?
Re: what size
ralpheboyo said:
what size r u looking for to have?
Click to expand...
Click to collapse
I would to resize the storage card to 60 mb, as suggested on the upgrading wiki; now i have 16 mb extrom, 45 mb storage card, and 32 mb "temp disk" that i would to know if it waste storage memory.
Thanks
unhide/unlock extended rom?
not sure where the problem lies. Can only suggets to try the procedure again. Make sure u unlock and unhide ure extended rom. Sorry cant be much more help
Re: unhide/unlock extended rom?
ralpheboyo said:
not sure where the problem lies. Can only suggets to try the procedure again. Make sure u unlock and unhide ure extended rom. Sorry cant be much more help
Click to expand...
Click to collapse
Thanks, and yes i've tryed too to unlock and unhide the extended rom in wm2003, but the supplied tool has failed too, with some other error that i don't remember
Perform these steps in WM2003SE
1. unlock extrom
2. unhide extrom
3. resize extrom to 128k
you now have 60 mb storage (it is storage, not storage card)
xplode said:
Perform these steps in WM2003SE
1. unlock extrom
2. unhide extrom
3. resize extrom to 128k
you now have 60 mb storage (it is storage, not storage card)
Click to expand...
Click to collapse
Very strange... i've asked a friend with an imate p2k and the tools worked correctly, so i've downgraded to an imate wm2003se rom (my was a qtek one) and everything goes ok..
I'm glad i was helpful
is there any way to resize this without downgrading?
Hiya
I was searching XDA-DEVELOPERS website about 2 days to find a solution for this problem, I have an I-mate PDA2K, i used all EXTROM tools on this website like this:
1- Installed EXTROM_tools,
2- run UNHIDE ,
3- then run UNHIDE,
4- Soft Reset,
5- now i can see Extended_ROM on my file explorer, i can read it , and able to write on it ... copy paste ...
6- run REPART_DOC.exe on my device,
7- tried many sizes like 128kb, 1024, 2048, 512, 61000, .................
but on this step i always get the god damned FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed,
i finally used Task 28 under MTTY but nothing happened, still have this problem,
No Wayyyyyy ! No wayyyyyyyyyy to repart my DOC size, .... noooooooooooo wayyyyyyyyyyyyyyyy
anyone going to help me plzzzzzzzzzzz ?
BORBOR said:
Hiya
I was searching XDA-DEVELOPERS website about 2 days to find a solution for this problem, I have an I-mate PDA2K, i used all EXTROM tools on this website like this:
1- Installed EXTROM_tools,
2- run UNHIDE ,
3- then run UNHIDE,
4- Soft Reset,
5- now i can see Extended_ROM on my file explorer, i can read it , and able to write on it ... copy paste ...
6- run REPART_DOC.exe on my device,
7- tried many sizes like 128kb, 1024, 2048, 512, 61000, .................
but on this step i always get the god damned FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed,
i finally used Task 28 under MTTY but nothing happened, still have this problem,
No Wayyyyyy ! No wayyyyyyyyyy to repart my DOC size, .... noooooooooooo wayyyyyyyyyyyyyyyy
anyone going to help me plzzzzzzzzzzz ?
Click to expand...
Click to collapse
Hi. I have the same problem with my i-mate PDA2K. I Can't run the extrom tools, can you say me how you resolt this problem?
Thank u
vipzeus said:
Hi. I have the same problem with my i-mate PDA2K. I Can't run the extrom tools, can you say me how you resolt this problem?
Thank u
Click to expand...
Click to collapse
try this fix....
you should try to flash your extrom to another language of Extrom... or another carrier.
according to the bottom notes of THIS(Read this) post...
then try the procedure again in WM2003
PH20B O2___001 (O2XdaIIs)
Tried that ROM, as well as others to no avail. Installed WM6 anyway, let the internal battery drain, and random stuff disappeared. Owner info, start menu and today items, program settings, etc. I assume because it was stored in volatile memory. Please investigate!
SilverSamurai said:
try this fix....
you should try to flash your extrom to another language of Extrom... or another carrier.
according to the bottom notes of THIS(Read this) post...
then try the procedure again in WM2003
Click to expand...
Click to collapse
Hello, i'm newbie in this place. From Portugal.
I upgraded my Qtek 9090 to Helmi's AKU3.2 16MB page-pool 32MB RAMDISK.
I think that i follow all the steps, and it's working (with some bug's).
When i install software it asks where to, and it give me 3 options: "Device", "RAMdisk" ans "Storage Card".
My questions are:
1 - What's "Extended Rom"?
2 - How can i see if i have it?
3 - Can i delete the folder EXTROM that i copy to SD card for instalation?
4 - Why do i have an "x" in connections next to no signal of radio when i had a "G" for GPRS in win2003?
5 - Why my phone sometimes rings normaly and sometimes rings 1 time and the screen turns off but it's still ringing with no sound?
Help the newbie here
My device information is:
Qtek 9090 unlocked
CPU: Intel(R) PXA263
Speed: 400 Mhz
RAM Size: 96 MB
Flash Size: 32MB
Storage Size 60.30 MB
Operator Version AKU3.2
ROM Version 5.04.06 WWE
ROM Date 03/02/05
Radio 1.15.00
Protocol 1337.45
ExtROM 1.3
Read The Wiki :[ :[ :[ :[ :[ :[ :[ :[ :[ :[
I'm a newbie, but i'm not a fool.
I already read the wiki.
These are some questions that i didn't understand.
I will apreciate some awnsers from the "gurus".
Thank you.
1 - What's "Extended Rom"?
it's a place where most Operators use to store extra apps, could be anything. I take a guess here, but most of us here dont use extended rom, we usually resize it to 128kb, so there is more space for the OS.
2 - How can i see if i have it?
there is cab out there, i think it was packed with of the previous wm5 rls. cant remeber which rls though .
3 - Can i delete the folder EXTROM that i copy to SD card for instalation?
yes u can. it's an optional package. but it's good to have it, so read it up, see if u need any app in extrom folder
sry i cant help ya with q4 and q5.
my 50 cent about q4: I noticed (in Italy at least, dunno if that is valid worldwide) that when the big G is replaced by an x, I can't send or receive SMS messages. this is the only thing happening to me in this case.
a friend of mine told me this happens when he goes out of credit, but I was unable to confirm this.
hi guys! I was trying to cook my own xplode ROM but I always get low virtual memory error. I was hoping someone can cook for me an xplode ROM without the following:
transcriber
windows live
firmware update
terminal services
htc x-button
PS: What is the last file that created during the createrom.bat process? I get up to something like WIFI.bmp.
check your PM...
PoGa
i think you have to install more ram .... or increase the space that the page file gets
once again i have tested it on 1 gb ram without issues