Hi,everyone.
I tried to upgrade my XDAIIs to WM5.but met "FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed"when I tried to resize the EXT_ROM.
I've done a hard reset and install the ext_rom files as a standard procedure.Then install xda-developers_Unlocker.CAB.
I tapped unhide then did a soft_reset,'unlock' then soft_reset.So I did see the ext_rom as well as copying/deleting files in it.
But when I used the DOC repartitioning tool with default value'128kb',I received the error "FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed"
I've tried several times,still doesnt work...
ROM:1.42.00 WWE
Radio:1.13.00
EXTROM version:1.42.119 WWE
Any help will be great.Thanks for advance. :x
me too!
I had this same error on an sx66. I have 2 of them one of them gave this error and I couldnt upgrade, the other worked fine and it's upgraded to wizard v2a now and doing great. Any ideas on what this error means or how to get around it and reformat the ext rom?????
Me too
Got exactly the same issue,,, At least i have installed wm5 without reformating the rom but I'd like to find why mine BA is doing that instead of the one of a friend, exactly the same origin... For my friends it works at the first time....
Hiya
I was searching XDA-DEVELOPERS website about 2 days to find a solution for this problem, I have an I-mate PDA2K, i used all EXTROM tools on this website like this:
1- Installed EXTROM_tools,
2- run UNHIDE ,
3- then run UNHIDE,
4- Soft Reset,
5- now i can see Extended_ROM on my file explorer, i can read it , and able to write on it ... copy paste ...
6- run REPART_DOC.exe on my device,
7- tried many sizes like 128kb, 1024, 2048, 512, 61000, .................
but on this step i always get the god damned FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed,
i finally used Task 28 under MTTY but nothing happened, still have this problem,
No Wayyyyyy ! No wayyyyyyyyyy to repart my DOC size, .... noooooooooooo wayyyyyyyyyyyyyyyy
anyone going to help me plzzzzzzzzzzz ?
I second that request. I've got exactly the same problem, however with a genuine Qtek 9090. After unhiding and unlocking, I can delete all the contents of Storage and ExtROM. In fact, both are empty now. However, any attempt to use the partitioning tool only results in that %&$§/%(/ error message.
I've tried nearly any wm 2003 firmware since someone mentioned he succeeded by using an old pda2k firmware - still the same result. I've even changed the name of the Storage FS driver in the registry - no success either.
I'd be happy to provide some debug information or the like.
PLEASE HELP!
you need a language specific tool
z.b. in the german version programm files are called programme, but the link show on the englisch programm files.
hear is the german one:
wmvfan said:
you need a language specific tool
Click to expand...
Click to collapse
My ExtROM _is_ unlocked. I did write that I was able to delete all its content. So it's quite pointless to talk about localized unlockers.
Reasonable comments, anyone?
There is I believe a way to do this through MTTY. At least get everything back to normal before running the resizer tool. (A way to bring DOC chip to factory formating) Its probably corruption of the DOC. I remember doing this on the Universal, I just don't remember any of that right now. Do an all device search for MTTY and DOC for a possible solution and verify it with some of the hardware gurus first before attempting.
Well, what I did is that
set 14 0
task 28
task 0
sequence which cleared the ExtROM and corrupted the boot screens (there are white stripes across it now), but had no effect on the DOC_repart error message.
I'd really appreciate some investigation from the gurus here since the problem exists for several years(!) now without any solution.
guys...
try this...
downgrade to wm2003
unlock/unhide/repart your doc first to your liking.
then upgrade to wm5 or wm6.
downgrade to wm2003
unlock/unhide/repart your doc first to your liking.
then upgrade to wm5 or wm6.
Click to expand...
Click to collapse
I'm sorry to sound harsh, but: Is it really that difficult to read? I said that
I've tried nearly any wm 2003 firmware since someone mentioned he succeeded by using an old pda2k firmware
Click to expand...
Click to collapse
and
After unhiding and unlocking, I can delete all the contents of Storage and ExtROM. In fact, both are empty now.
Click to expand...
Click to collapse
So once again for the slow-minded: Me and my previous speakers did try this under (in fact several different) wm 2003, not wm5 or wm6. There is no ExtROM accessible in wm5 or wm6.
Again sorry, this time for repeating:
Reasonable comments, anyone?
landmark said:
I'm sorry to sound harsh, but: Is it really that difficult to read? I said that and
So once again for the slow-minded: Me and my previous speakers did try this under (in fact several different) wm 2003, not wm5 or wm6. There is no ExtROM accessible in wm5 or wm6.
Again sorry, this time for repeating:
Reasonable comments, anyone?
Click to expand...
Click to collapse
---------------
@Mods
(I hate to reply to this but i have to about questioning my reading skills)
---------------
Actually IF you tried it right for the first time you can never go wrong.
in WM2003
1. UNHIDE
2. UNLOCK
3. FORMAT_DOC set it to the smallest size
Because technically and sensibly:
You cannot unlock a hidden partition
You cannot format/resize a locked partition
That's as plain as it could ever be.
My 3-LINER INSTRUCTION is sufficient to solve your problem.
MTTY doesnt have to enter the scene it's only used if you have a broken mail button.
You(Generalizing) never said exactly where and what OS is you(Generalizing) are doing. Such WHINING deserves my straightforward answer.
So we give instructions, as we are given the problem.
What's not reasonable from what i've said?
Even a 5th grader can do instructions.
(now that's harsh)
FYI
There IS and WILL BE an Extrom in and WM5/WM6 even if you have changed it in WM2003. It's part of the BA.
You just cant see it and it's not being utilized. it's a Disk_On_Chip. if you managed to know MTTY.
You SHOULD know that.
ROLLBACK to 2003se then do everything right. Otherwise, read the WIKI.
and if you're sure you're doing everything right then you might have a faulty hardware.
nuff said.
-----------------------------------------
me said:
Me and my previous speakers did try this under (in fact several different) wm 2003, not wm5 or wm6.
Click to expand...
Click to collapse
SilverSamurai said:
ROLLBACK to 2003se then do everything right. Otherwise, read the WIKI.
Click to expand...
Click to collapse
me said:
There is no ExtROM accessible in wm5 or wm6.
Click to expand...
Click to collapse
SilverSamurai said:
There IS and WILL BE an Extrom in and WM5/WM6 (...) You just cant see it and it's not being utilized.
Click to expand...
Click to collapse
Sorry to tell it that straight, but if your answer isn't due to a failure of reading, it has to be due to a failure of understanding.
Reasonable comments, anyone?
straight? duh! it's crooked.
i guess you know logic... the flow of it, then analyze this.
hello...
im NOT the one who has the problem here...
AND you are NOT the ONLY ONE who got that problems here.
your quote above this is in response to my post, is actually a RETALIATION.
BUT PLEASE UNDERSTAND that my post's subject WERE the posts before
if its hard to comprehend then let the readers decide.
and regarding the extrom. i can access the DOC via MTTY with WM6.
which makes you wrong and im correct. nuff about that.
1. Nobody said factually and specifically that they tried it with WM2003 at one time (In General),
2. You've got a problem then im helping,
(i actually helped someone with my post and pmed me via yahoo... 3 persons)
3. I've helped... you berrated.
4. Not a good member, actually not constructive.
you wont get any reasonable answers if you yourself aint being reasonable.
actually i was the only one who posted some help for you,
and that is how you react.
ahaha... i hope the mods are reading this.
i gladly like to hear their reasonable comments and close this thread.
This thread is to investigate a software failure which circumstances are accurately described, not to please your ego. Your past contributions were useless since you didn't pay attention to the specifications given.
There's no point in repeating inapplicable phrases, and doing so in spite is not what I call "some help" - it is in fact pure nuisance and puts the problem solving at risk.
Please keep your narcissism out of this thread. Thank you for your understanding.
is this probleme solved??
Maybe you try this:
1. Downgrade to wm2003s
2. copy unhide&unlock (*.cab) to main memory and run it
3. start/program/extrom there we have 4 program ( hide, lock, unhide, unlock) --> run unhide then unlock ---> softreset
4. copy repartDOC (*.exe) to main memory and run it:
- format with 128kb --> you'll have 60Mb storage
- format with 16000kb (recomment) --> you'll have 45Mb storage
6. then Upgrade to wm5.0 or 6.0
7. after upgrade --> do a clean with record+camera+softreset --> no/ yes/ yes
Enjoy
ttrungkien said:
is this probleme solved??
Click to expand...
Click to collapse
Unfortunately, it is not.
ttrungkien said:
4. copy repartDOC (*.exe) to main memory and run it:
Click to expand...
Click to collapse
And that's the point where the mentioned error message occurs.
Some fellow posters and me tried some dozens of different wm2003(se) versions on their Blue Angels, ran virtually any unhide/unlock tools available here, cleared their ExtROM and Storage areas to the very last bit, even tampered with the bootloader accessible via MTTY to get things in order.
To me, it's out of the question that most of the posters who've reported that error could be to simpleminded to follow the few instructions. It appears that there are some devices which have to be either different by hardware or by software that can't be repartitioned by the published tool.
However it's a fact that the Blue Angel is an outdated device these days and I fear that the dev gurus won't pay attention anymore.
landmark said:
And that's the point where the mentioned error message occurs.
Click to expand...
Click to collapse
I was in this trouble 2 days ago! because i didn't go to Start/Program/extrom/ unhide then unlock then SR, before fomart the extrom!
I was in this trouble 2 days ago! because i didn't go to Start/Program/extrom/ unhide then unlock then SR, before fomart the extrom!
Click to expand...
Click to collapse
Ah. Fine. Thanks for your story.
WE DID USE WM2003SE
WE DID UNHIDE AND UNLOCK
(I even told you that we deleted all content of ExtROM and Storage)
We're NOT to crackbrained to follow some simple instructions. because of that...
PLEASE EVERYONE
STOP SUGGESTING
1) to rollback to WM2003SE
2) to use the unhide/unlock tool properly
WE DID!
*sniff* Maybe me posts are in caucasian or so and I'm the only one who sees them as english...
landmark said:
Ah. Fine. Thanks for your story.
WE DID USE WM2003SE
WE DID UNHIDE AND UNLOCK
(I even told you that we deleted all content of ExtROM and Storage)
We're NOT to crackbrained to follow some simple instructions. because of that...
PLEASE EVERYONE
STOP SUGGESTING
1) to rollback to WM2003SE
2) to use the unhide/unlock tool properly
WE DID!
*sniff* Maybe me posts are in caucasian or so and I'm the only one who sees them as english...
Click to expand...
Click to collapse
u found a solution for this ?! i've the same problem, and everybody give me this suggestion !!!
i cannot format my extrom too what's the problem ?>
Hi People....
I have a bit of a prob, and have hit a stumbling block!
I have a PH20B2 Vodafone Branded, Radio 1.12 (tried WM5 have now put wm2003SE back on!) and have connected to it with Mtty...in Bootloader mode
ok the following happens
USB>info 1 2.07
The first bit of wierdness!
USB>info 2 HTCSVODAP001 Qò.¾HTCE
The second bit!
USB>info 3 HTCSå»HTCE
USB>info 3 HTCS™5mHHTCE
USB>info 3 HTCSGÒf€HTCE
OK.. so tell me thats normal?? info 3 gives wierd stuff out evey time i ask the command!
USB>rtask b (any way to get in without the security check?)
Radio AT command debug with security check.
3E9E6475854A70D700D0B81FEC9F56EC839FEE7D4718CD7CFC2D07
at%cid? VODAP001
at%security?
LOCKTIME: ff
So I want to make this device a supercid device, and switch security OFF
I checked the Wiki, and there is loads for the wiz, but not the BA...but hey.. i tried it anyhows!
So.. Someone suggested using Awizard, or IWizard... No Joy...
Then someone suggested XDA Unlock
Here is the log file!
xdadev_all_unlock started
device=PH20B2
key found
ril ioctl 0xc2: 00000000
simlock answer: %SIMLOCK= 00
0
current lock status: 00
security answer:
000
security answer2:
at%LISTNETWORKCODE answer: 0
at%LISTNETSUBCODE answer: 0
at%LISTSPCODE answer: 0
at%LISTCORPORATECODE answer: 0
at%LISTSIMCODE answer: 0
at%LISTIMSIRANGECODE answer: 0
at%CLEARNETWORKCODE answer:
at%CLEARNETSUBCODE answer:
at%CLEARSPCODE answer:
at%CLEARCORPORATECODE answer:
at%CLEARSIMCODE answer:
at%CLEARIMSIRANGECODE answer:
simlock answer:
invalid sim lock answer
didnt change the CID, or security BTW.
I have tried everything.. now i am throwing it out to someone who knows what they are doing!
Hope You can Help..
Juggs
hmm.. no-one??
Hey everyone.. Is there really no-one who can help?
one last try before i try and PM random people!
Cheers..
I am interested about that too, but i have no experience how to do it, it is a interresting project
I am at a bit of a loss
xplode said:
I am interested about that too, but i have no experience how to do it, it is a interresting project
Click to expand...
Click to collapse
I cant think of anythig else to do...
Maybe i need a custom Bootloader..
After spending DAYS going through the Wiki, various internet sites, about 5000 posts.. I think i am going to need help from Helmi or Buzz...
Is there any way of removing the security flag, and making the device supercid ??
VODAFONE V1620 Can anyone post me the originally backuped rom?
I have a terrible problem and I can't resolve.
Probably I need the originally rom/radio rom to solve it
Someone can help me???
thanks
look at vodafone support sites
hi,
unfortunately no rom/update on the bodafone.co.uk
only text
thanks again
bye
Vodafone WWE (Brightpoint´s Update Center)
why don't you guys first look at wiki ?
thanks xplode,
I have already downloaded and tried this withouot success.
I can't use it on my device for various errors.
I need only the radio rom (radio_.nbf file) for use with MaUpgradeUt_noID(this is the only tools that I can use on my device without errors.
Do u know How I can extract/found the radio rom from this complete update file(*.exe)?
MY DEVICE DATA ACTUALLY IS THIS:
PH20B 0 B WWE E 1.40.00 0 0
MY DEVICE TYPE IS THIS:
VODAFONE V1620(ORIGINALLY LOCKED [TO VODAFONE UK I SUPPOSE])
THANKS AGAIN
GRRR.. this guy is annoying...
secur said:
thanks xplode,
I have already downloaded and tried this withouot success.
I can't use it on my device for various errors.
I need only the radio rom (radio_.nbf file) for use with MaUpgradeUt_noID(this is the only tools that I can use on my device without errors.
Do u know How I can extract/found the radio rom from this complete update file(*.exe)?
MY DEVICE DATA ACTUALLY IS THIS:
PH20B 0 B WWE E 1.40.00 0 0
MY DEVICE TYPE IS THIS:
VODAFONE V1620(ORIGINALLY LOCKED [TO VODAFONE UK I SUPPOSE])
THANKS AGAIN
Click to expand...
Click to collapse
OK i know you are new.. and maybe, just maybe a bit nervous because you have a device you cant use..
READ THE DAMN WIKI ALREADY!
There are so many ways to upgrade a rom, or extract it,
Let me give you a little hint.. Use that really bright shiny search button up there.. (ok so its not bright and shiny, but it is there!)
Press the down arrow, choose advanced search,
then type in MaUpgradeUt_noID,
then make sure that the forum is BlueAngel (on the right!)
then hit search...
That will bring all the posts with the words MaUpgradeUt_noID in the BlueAngle section of the forum.
There will be on that explains how to extract the radio for a released update..
and how to install it using MaUpgradeUt_noID instead of the other installers.
Multiple posting is stoopid.. This is the 3rd post i have seen from you regarding your device that you could have solved using your own head, and searching for the answer istead of sitting on your backside waiting for someone to post the link to solve all your problems.
I know this sounds harsh, and scarcastic, and a tad evil... EVERYTHING I HAVE LEARNED ABOUT A HTC DEVICE, I HAVE LEARNED FROM THIS SITE,
and reading the wiki, and google, and all kinds of other services...
there is no shame in asking for help.. just exhaust all other options first!
vodafone v1620
for probem contact me I write something when my idea will be more clearly
by now i have just resolved a lot of problem
now my device is this:
P H 2 0 B W W E 5 . 0 4 . 0 9 . 1.4 NONE 4 % 4
???
secur said:
for probem contact me I write something when my idea will be more clearly
by now i have just resolved a lot of problem
now my device is this:
P H 2 0 B W W E 5 . 0 4 . 0 9 . 1.4 NONE 4 % 4
Click to expand...
Click to collapse
why dont you just write what you have learned in this thread.. that way other people can learn as well!
Hi guys,
A friend of mine working @orange just gave me a htc diamond...which is not working at all.
=> All I can do is turn it on, and then it stays on a fixed image with an orange logo...nothing more
I therefore read many pages on this amazingly rich forum, what I would apparently need is to change the rom (which must be wrong since the phone was used for some internal tests)
The only thing I manage to have is the "3 colors" starting page with info on the system. here's what is written :
"SECURITY UNLOCKED
DIAM 100 64M
SPL-1.23.0000
MicroP-Diam (LED)v10
PSOC-Diam STAGE_CVT v0x23"
and at the bottom :
"SERIAL"
Moreover, when I plug it to my pc (without active sync), I have the message :
New hardware found : "Qualcomm CDMA Technologies MSM"
=> the 1M dollar question is : Can I install a rom from that status ? if yes how to do it ???
Thanks in advance for your help...since I'm kinda lost and have no idea who to ask help from...
Charles
ultCharles said:
Hi guys,
A friend of mine working @orange just gave me a htc diamond...which is not working at all.
=> All I can do is turn it on, and then it stays on a fixed image with an orange logo...nothing more
I therefore read many pages on this amazingly rich forum, what I would apparently need is to change the rom (which must be wrong since the phone was used for some internal tests)
The only thing I manage to have is the "3 colors" starting page with info on the system. here's what is written :
"SECURITY UNLOCKED
DIAM 100 64M
SPL-1.23.0000
MicroP-Diam (LED)v10
PSOC-Diam STAGE_CVT v0x23"
and at the bottom :
"SERIAL"
Moreover, when I plug it to my pc (without active sync), I have the message :
New hardware found : "Qualcomm CDMA Technologies MSM"
=> the 1M dollar question is : Can I install a rom from that status ? if yes how to do it ???
Thanks in advance for your help...since I'm kinda lost and have no idea who to ask help from...
Charles
Click to expand...
Click to collapse
yes you can just run the rom updater utility
well then several questions :
1) what should I answer to the "add new hardware pop up"
=> it cant find any driver...if I say "look for best drivers"
2) where to find the rom update utility, and a tuotorial ?
Thank sin advance
charles
ultCharles said:
well then several questions :
1) what should I answer to the "add new hardware pop up"
=> it cant find any driver...if I say "look for best drivers"
2) where to find the rom update utility, and a tuotorial ?
Thank sin advance
charles
Click to expand...
Click to collapse
the first thing you could try is a hard reset on the device. you can find instructions on that by searching the diamond section. thats all that it may need.
if not there are many flashing and updating tutorials all found in the corresponding section to the devices.
Using hardspl I can connected to my treo. But it stop update 0%, I now can show the phone show 0% Upgrade Image Completed.
The hardspl asked me to using the recovery button, after click the recovery button, its asked me again to update the ROM, but still stop in 0%.
So, any help from my expert friends...please...
Many thanks.
wg2002 said:
Using hardspl I can connected to my treo. But it stop update 0%, I now can show the phone show 0% Upgrade Image Completed.
The hardspl asked me to using the recovery button, after click the recovery button, its asked me again to update the ROM, but still stop in 0%.
So, any help from my expert friends...please...
Many thanks.
Click to expand...
Click to collapse
willy
before that i have the same issue like yours, but i can fix it
use mtty to fix it first, then use CHEEIMG.nbh WM5 cingular,
you can invited my YM at y_aris, i will give you the step
Hi Y_ARIS,
Nice info from you.
I already invited you to my YM, because you are not login yet, can you just write down to me to my email the step by step from mtty and where can I get cingular ROM WM5 ??
Email me to [email protected]
THANKS
wg2002 said:
Hi Y_ARIS,
Nice info from you.
I already invited you to my YM, because you are not login yet, can you just write down to me to my email the step by step from mtty and where can I get cingular ROM WM5 ??
Email me to [email protected]
THANKS
Click to expand...
Click to collapse
i sent you via yousendit for treo cingular, & for mtty you can see at the forum xda forum thread urgent help please at page 2 & download the file,
follow that instruction for mtty
set 14 0 <enter>
task 28 <enter> / you can do task 28 55aa
task 0 <enter>
when you see this
Total Bad Block in CE: 0 this must be zero
if total bad block not zero you will stuck when loading image
after this you can do hard reset like explained at this forum with use CHEEIMG.nbh in minisd formated FAT32
wish you luck