Database Develop

Need super help with dopod d810!!! Upgrade ERROR!!!!

i went to the website
www.asia.htc.com/asia/event/WM6/index.html
and followed the on-screen instruction
what happened now is that there's an update error
i followed the step by step to recover but the thing just stuck there
now whenever i on my dopod d810,
my screen just shows the 3 color screen
and that's that
i dont know what to do!!!
help!
and this is crap
i cant seem to establish a connection AT ALL with the activesync
and whenever i want to update, it just says ERROR [286]
i did ALL the steps it suggested
- disconnect USB cable from phone
- remove the battery
- wait 3 seconds and reinstall
- when you switch on, you see 3 screens
- connect USB cable again
- resume install
and then after i resume install,
SAME PROBLEM again! ERROR [286]
its like a vicious cycle!
Just for your info
i am currently using activesync 4.5
and right now whenever i connect my usb to my phone,
the activesync doesnt seem to be able to detect the phone at all
here is the video of my several attempt to upgrade
just download it here
http://www.sendspace.com/file/ha26ws

Is there anywhere where i can download
WM6 for
- Hong Kong (ENG)?
what happened is that right now
i actually used the Aussie one and that doesnt work i think
(assuming that is the problem)
I tried the SEA one and it also doesnt seem to work
I heard that you need to use specific update
the problem is
i dont know where my dopod originate from???
is there any way to tell?

what does the tri-colour screen say?
you can check out trinityguides upgrade problem faq and see if those steps help you.. all isn't lost yet, you should be able to revive your device
let me know how it goes

the TRI screen color says
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
ive seen the faq
doesnt help me at all

I think i might need to flash back to WM5 first
problem is,
where can i download the WM5?

Stalvros said:
I think i might need to flash back to WM5 first
problem is,
where can i download the WM5?
Click to expand...
Click to collapse
here http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades

yeah, flashing back to wm5 is a safe bet at this point...
have you tried splxploit?

thanks~
i actually fixed this problem yesterday
i found that link that you gave
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
through this
http://xman892.blogspot.com/
the strange thing is that~
the WM6 that that guy use doesnt seem to have any transcriber
while the official WM6 latest version has

It's not strange at all. The rom that you downloaded is a cooked rom. I think the cook removed any excessive stuff and so you may not find everything you want there.

Stalvros said:
the TRI screen color says
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
ive seen the faq
doesnt help me at all
Click to expand...
Click to collapse
try this, it solve my problem just like yours!!!
http://vimafeje.com/splxploit-windows.zip

SERIAL / V 2.07 In Qtek 9090 Mistake

Hello I have a blueangel Ph20b2 aka Qtek9090 try an upgrade of the rom and ruling .. I was just turning on the device with serial and V2.07 I can do .. I have read by the network that has been left without the Romany and non interacts between soft and hard .. There is some system to revive .. Some software anything .. Since connect the PDA at the base i usb of the laptop does not recognize no nothing.

Eeeeehmmmm, yes, nice. But we do not understand a word. Was it google-translated or something?
If you did something wron during upgrade, just do the upgrade again. Follow the procedure step after step, do not omit even one step - try to understand what are you doing and what for.
Without more understandable information (about what were you doing and what is happening) we cannot help you.

Stupid mistake - Serial 2.07
Reading between the lines of the original post I suspect the author has done the same as me - or at least ended up with the same result. Anybody know of a fix.
Cause; I attempted to restore from backup over wifi (yes wifi - I was desperate & didnt have the cradle available).
Result; my XDA 2s went blank and now displays a screen displaying "Serial V2.07" (or "USB V2.07" when in the cradle). No amount of re-attempting to re-connect to the device works. I'v tried soft / hard resets / battery removal etc. I'm using Microsoft ActiveSync V4.5. The XDA is an O2 badged variant.
I suspect I'm looking for a boot strap load program that will repair the xda rom such that i can subsequently reload its operating system. Any positive suggestions gratefully received.

just found reference to putting xda2s into bootloader mode "soft reset button,power button and center of D-pad button together" - this still leaves the screen saying "Serial v2.07" - Am I already in bootloader mode? - if it is what do I do next?

Fixed
problem solved - I went back to the 2nd posters answer and attmpted from the begining to install Xda_IIs_Upgrade_v140242.exe, ignoring what was on the xda screen & it worked.
I now have a functioning xda - but I still have with the problem I was trying to solve in the first place.
After a the xbackup restore, the xda desktop isnt re-written cleanly, it overlays semi-transparently on top of the last program run. The desktop accepts stylus commands to run programs which open and display cleanly. How can I clean this up - I dont want to loose O/S DBs e.g. my messages etc. - I dont see a way I can port them across upgrades so I can not just stick with the Xda_IIs_Upgrade_v140242.exe

I feel if they have not understood anything written .. I do not understand Spanish and in English .. I have the problem of serial V.2.07 screen .. Where can I download a rom for qtek9090. In my pda you do a hard reset buttons with record power + + reset and still continues to do nothing with serial on the screen .. If there is any mistake in what they write what I am using the translator google

i got the same problem ...screen saying "Serial v2.07" - Am I already in bootloader mode? - if it is what do I do next?
hate to throw my phone in the garbage can
please someone help meee

anybody found any news?
still in bootloader mode, error 112 at stage 3. BA turns off when trying to update.
2much 4me
anybody come back from this point to wm3?

Error 246 Device not responding

I'd bought my htc p3600 pro (black, free from sim-lock & free from any carrier) from London.
As advised by TRINITYGUIDES.INFO site I tried to do HardSPL with all the three available HardSPL files, but of no avail.
When the HardSPL's progress bar comes(on pc) it gives a message on my phone " Enterbootloader.exe....This may harm your device...Do you want to continue.." I pressed yes & the process stopped & gave an error on pc "Error 246 Device not responding" & on phone screen showed the bootloader with
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
I did soft reset on my p3600 & its working as usual with it original spl infos.
I want to put official WM6 SEA version(ROM+RADIO) on my phone...Please help.

I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks

wingnutLP said:
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
Click to expand...
Click to collapse
Search is great function
http://trinityguides.info/index.php?option=com_content&task=view&id=37&Itemid=67

wingnutLP said:
Sorry!
I am an idiot.
Thanks
Click to expand...
Click to collapse
sorry I tried a Google search on the error message and came up with this thread!

wingnutLP said:
sorry I tried a Google search on the error message and came up with this thread!
Click to expand...
Click to collapse
Search more...
With this link:
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
if you search error 246 you will get the solution on 11th answer.
Search more...

Have the same [Error 246]! How can I definitly fix it?
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo

Some specifications....
Sorry.... I have a P3600 White with Olipro 1.20 and rom Elias 1.9 SE Lite...

Tompo81 said:
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Click to expand...
Click to collapse
Before flash manually enter bootloader. After start the rom update utility. (As www.trinityguides.info suggest). You will not get error 246 any more

thanks for answer
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo

Tompo81 said:
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Click to expand...
Click to collapse
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)

Ok, now I really understand
Ok, this is a very good anwser, short and clear... thanks...
Ciao
Tompo

fktsndr said:
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Click to expand...
Click to collapse
When i connect my touch hd to pc in active sync mode, then shutdown device an run in bootloader (volume down and power button at same time) i get the tricolor screen and after a while i get the progress bar on my phone and on pc. But i stays on 0% and says 'update error' after a while.
please help

I Have the Same Problem the Status bar Freeze On 0% and nothing happened
Until the Update Error Message Displayed
Please Advice
Thank You
Note: I Have HTC Diamond2 (Topaz) Without Sim Louk

Hi Me has the trinity 3600 as a VPA GPS vodafone branding, and i get the same error message trying to run the bootloader and entering tricolor screen, ---> error 246 aber manually starting into bootlaoder and restatrting the romupdateutil.exe same error 260 no connention...
So you guys have a working version of the updating ?
And please remove all the links which are not working, linking a solve for the 246 problem, there are nomore links available...
thanks
Dome

I found a way to solve the problem 246 go in you mobile device, -->start -> settings-> connections ->USB to PC open this. Remove the hook @ Advanced networksettings activation! ---> click OK--> close
try again the bootloader etc, then on the tricolore reboot screen is shown USB in the lower white field and the bootloader can do its routine complete.
Have Fun with flashing the phones!
Testet with original German Vodafone available ROM " vpa_comp_gps_RUU_Trinity_VF_DE_1_23_162_4_6275_1_29_00_01_13000_108_Ship.exe "
testet with ZackMcRofls superfast german rom " RUU_Trinity_GER_1.23.162.2_GPS_v3f_by_ZakMcRofl "
testet with
" htcp3600_RUU_Trinity_HTC_GER_1-23-407-2_103_6275_1-38-00-11_108 "
First was Zack´s rom, 2nd. was Original Rom, 3. was Trinitys rom, after trxing all, i flashed Zacks Rom again, it was the best in my view.
Thank you verymuch, bb

Which WM6 has phone support ?

Hi,
I have the SPV M1000 (Himalaya), and phone used to work, then died. Texting worked, but phone didn't. So i used the Orange supported software, but it downgraded it to Win Mobile 2003. Although the phone did work, i prefer WM6 for the rotate screen feature etc.
Anyway, i downloaded a few WM6 roms, but of the 3 i tried, none of them allowed me to use the phone bit of the M1000.
Which WM6 rom should i download to get the phone working okay with my Himalaya ?
I tried C_ShekharAKU7.0c.R40.P24_public, also himalaya_6_1_0_0 file, but i cannot get the phone to work.
Regards,
Andy

I would suggest that either something is wrong with the phone section, or someone has made a mistake when upgrading the radio section of the phone.
The radio upgrade is a seperate upgrade to the ROM. All Windows Mobile roms should have phone support automatically, it is just a matter of getting the right radio working for you.
I am at work and as such I can not provide you any more detail, needlesss to say, use the search function in the top right hand corner of this website, and search in the Himalaya section for radio upgrade.
Cheers

Cheers Jadel, will give that a go now !
Best Regards,
Andy

Hello,
I'm now getting a strange error ! - i downloaded "C_ShekharWM6.1.1cR16.P32_public", but when i try to install i get a "country code" error ! - "ERROR 120: COUNTRY ID ERROR N-4-1-N-N".
What does this mean ?
Regards,
Andy

Use HimalayaUpgrade_NoID instead...........!

If you go to the Himalaya Upgrading section, you would have noticed this is the third link from the top "Fix and prevent ROM Upgrading/Downgrading Country ID Errors"
Here is the link, read it all and don't skip ahead, Rom upgrades can brick a device if not done properly.
http://forum.xda-developers.com/showthread.php?t=228852

Many thanks, i'll try that !
Regards,
Andy

Just tried the "himalaya 6_1_0_0" upgrade. Installed okay. But when on main desktop screen i'm getting errors, couldn't open these files : "Screenrotate.exe", "btdwake.exe" and "Phoneservice.exe".
Other than that it works !
Help please.
Regards,
Andrew

T-MOBILE MDA III - Qtek 9090 please help (I from CZECH REPUBLIC)

Hi I from CZ and I have problem with my MDA III
what can I do ? please
"bootloader doesn't work and master reset too doesn't work" please help i dont know how to flash i was read much tutorials there but I not found a right tutorial please help me I dont know what i can do I form CZ and my mail is [email protected] ( kdyby nekdo z CR na to narazil tak mi prosim napiste a domluvime se na icq treba klidne kdybych to rozjel tak poslu i nejake penize nebo tak akorat mi prosim napiste co nejdriv ve stredu jdu jinak do servisu ale tam to bude stat hodne ) (this is PH20B

actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum

Chef_Tony said:
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Click to expand...
Click to collapse
I want go to bootloader menu but is dont work I press Power +record+softt reset with stylus but it doesnot work and when I conect MDA with cabel to COM this cable in not USB and active sync not found MDA and when I start update with exe it write me not found (sorry for my english) help me please ? can you write me more detailed tutorial what can I do for flash please what I must download and what I must do anywhere dont work download and i dont know where I can download any files
EDIT : Flashing is not compatible with serial cable ? I have this cable
Code:
http://www.i-obchod.cz/product.asp?productid=6663
this is to serial port (COM) when i buy this
Code:
http://www.easydevices.co.uk/pp/PDA_Accessories/Cradles/QTEK_9090_USB_SYNC_CRADLE.html
work it with this ? or it better when I go to service and pay 800kč this is about 25 Euro or 40 dollars and when I place an order this cradle i pay for this 18£ this is about 600kč and about 7days when it send me to home and I go to service tomorow but if I Flash it I not having to go to service

hi guys!
my ba also displays this strange message after an unsuccessed update (disconnected before finished). i have tried to install the update once more but it says: error 101: connection error. because i own my ba just since 20 hours, i don't know what to do now. so maybe someone could translate it into newbie-language. one more thing: unfortunately i use vista.
thanks for your help!

tried it once more with the new windows mobile device manager but my pc does not find my ba. vista just plays a sound when i put it on the cradle. i think you are the only ones in the hole www who can help me. need your help!

use maupgradeut_noid for upgrade
both of you read wiki there are solutions to your problems

maupgradeut_noid tells me this:
don't think that it is right.

hi folks!
i have tried it a hundred times with my vista mashine and a couple of times with xp on virtualbox but nothing. 15 minutes ago i have turned on my old xp mashine, downloaded the ROM from tmobile germany and started the application. it worked for me without maupgradeut_noid. only the original rom and nothing else. so my tip: don't waste your time with vista! xp is much better for solving this problem. thanks xp!

ok, but as i see it you didn't solve a problem but avoided it, and not even in the best way. i use vista too and i am unable to re-flash my device. the general problem is that the identifier of the device change over the flashing process, so vista downloads new drivers and cuts the connection. as i understand it, there is hardly any way to avoid that.
of course you do't need to use maupgrade_noid for an original rom, the _noid file is, as implied by the name, to avoide the device from identifying, so you could flash a WWE Rom to a rather locked german device.
as you might have realised, the picture you posted shows the magician and not the blueangel, hence the name Maupgrade instead of Baupgrade, which again is solved by the _noid version of the file and putting the device to bootloader first.
that the window does not show the versions from what version you flash to what version exactlyu doesn't matter at all. but as mentioned before, you should use an xp machine which will work like a charm!
am i to understand, that you have the latest official t-mobile rom on? the wm2003se?
as fast and battery friendly that might be, it is so out-dated and practically no newer third party software will be supported, like the fantastic application SPB Online, and the interface is incredibly ugly. if you ever want to try and flash your device again, try my tips above and it will work out just fine, as you seem to have mixed up a few things, but never mind.
i wish you best luck for trying again and will stand by for support, whether something might still not work out as planned.
good luck
Chef_Tony

well if you upgrade under vista take a look here
also look here for MAUpgradeUT_NOID and proper files - it is on the bottom of the page, so you only need the nbf files