Related
I've been using my phone with no problems for the past few days, but today it refuses to connect to the T-mobile UK 3G network... as far as i'm aware, i haven't changed any settings! Yesterday i was fiddling around with the MMS sending options... but i doubt this will have anything to do with it!
Looking in my connection settings, my options have been (automatically) set to:
Access point name: general.t-mobile.uk
Username: T-mobile
Password: (automatically filled in, so i dunno what it's using)
Proxy settings enabled, and set to :149.254.201.132
- Can anyone confirm if there's anything wrong with those settings?
- Are other UK ppl using the Kaiser getting any issues?
- T-Mobile wouldn't block my phone from connecting would they? (i'm assuming not!)
Thanks!
From memory the username is wapuser, password wap.
Something strange going on, as I'm on three(UK) and mines stuck on G only, when I have a 3 modem which is happly on 3G, but also my bro is having problems with tmob as well this morning.
I'm hoping it's an issue at T-Mobile's end :S
Grrr no matter what i do, it doesn't connect.... rebooted several times etc... just wont connect.
Where are you located, it could be a Local T-Mo thing, mine at home went off the other month for a day.
I've been on a train all morning from Sheffield to London and have been web n' walking all the way no probs.
Travelled from SE London, now in Central(ish) london (NW6)...
Normally the 3G connection is flaky on the journey in, but i cannot connect whatsoever right now!
Pooper said:
I've been using my phone with no problems for the past few days, but today it refuses to connect to the T-mobile UK 3G network... as far as i'm aware, i haven't changed any settings! Yesterday i was fiddling around with the MMS sending options... but i doubt this will have anything to do with it!
Click to expand...
Click to collapse
I've had temporary problems today in the morning on the way work in London as well, but finally I've got connected. Relax - such problems don't have to mean your device is faulty. Mobile networks also have bad days sometimes, you know.
I've had no 3g for 4 days on t-mobile uk in kent. I normally have speeds of 1mb. Guess somethings broken.
try using user as the username and wap as the password. i had a problem connecting to t-mobile last week, i changed the auto configured setting and put the old user and wap setting in and they worked, oh i also unticked the proxy server option. basically its the same setting i use for my mda vario. it solved the problem though
dolbe said:
try using user as the username and wap as the password. i had a problem connecting to t-mobile last week, i changed the auto configured setting and put the old user and wap setting in and they worked, oh i also unticked the proxy server option. basically its the same setting i use for my mda vario. it solved the problem though
Click to expand...
Click to collapse
What's 'officially' the correct details to use?
I can't find it on the T-Mobile site
Ok, now I see...
Had same problem this morning on my way from SE London to Central... It should be T-mobile. The only way I managed to connect was forcing GSM, and then going back to auto. Device quickly connected to GPRS and then swiched to HSDPA...
For settings: there are about 15 different combinations and they all work.
User: user
Pass: pass
That's what I normaly use...
Ah right
Well while i was on the phone to T-moblie, i asked them to activate HDSPA for me Yay!
Will i receive a TXT or something, asking me to reboot my phone once it's been activated? (how long do they usually take to activate it?)
Thanks!
No text and pretty instant without reboot in my case from memory.
BTW I'm in SE1 and have experienced network issues today.
HSDPA will work automatically as long as your in an area that can get HSDPA
Yay, it seems im HSDPA enabled now, and connected! woohoo!
Yes, seems like a T-mobile issue. Can get a data connection (on vpn.t-mobile.uk) but the VPN on top of it does not get through. Ordinary surfing is OK, but updating QuickGPS isn't.
Thanks guys, I was starting to get worried. Had problems with 3G yesterday morning and today. Traveling from Kent into London Bridge
My Location: Fort Worth, TX
My Provider: ATT
I've got this problem among several ROM's and Radio's that I get from time to time. I'd like to know how to fix it. Then once in a while I'll flash a new ROM/Radio combo and it works fine. Here's the story:
I can open up and browse the net fine with Pocket IE. It shows connected as MediaNET (HSDPA). Internet is fast and reliable.
However, with just about any other application it fails. E-Mail, QUICKGPS UPDATE, etc. I have the [H] icon.
Here's what happens if I open up "QuickGPS" and click download:
I get the [3G] icon.
* Click download
* Bubble that says: Connecting to My ISP, GPRS.... opens.
* Bubble above disappears. Bubble re-appears with identical info.
* Bubble says:
Dialed:
Could not connect for an unknown reason. To check your connection settings and change tem if needed, tap settings. If the problem continues, reset your device according to the manufacturers documentation and try again.
I've done the following to troubleshoot:
* Ensured GPRS auth is set to CHAP.
* Under connections setting my only connection is Media NET. It is a:
** Cellular Line (GPRS, 3G)
** Access point name: wap.cingular
** Username: [email protected]
** Password: is unknown. Censored. Probably CINGULAR1
I have tried adding a new cingular connection.
* Without a user/pass/domain.
It simply says Connecting to My ISP, GPRS.... but nothing happens. TCP requests seem to time out.
Any ideas? I'd much rather connect with HSDPA instead of GPRS anyways if it's possible.
I'm thinking it's a ROM/RADIO mismatch.
I flashed back to a ATT ROM with an included radio, and it works fine.
I was having problems with L26 ROM. Anyone have a link to a suggested radio for US with this ROM?
Here's a ROM with problems:
l26 rom
WWE 3.02.405.0
RADIO 1.64.06.04
Any ideas?
HSDPA troubles in San Francisco
I'm using an AT&T Tilt in San Francisco. Is there anyone else here in my neck of the woods who's getting HSDPA?
Read on!
jon_k said:
I'm thinking it's a ROM/RADIO mismatch.
I flashed back to a ATT ROM with an included radio, and it works fine.
I was having problems with L26 ROM. Anyone have a link to a suggested radio for US with this ROM?
Here's a ROM with problems:
l26 rom
WWE 3.02.405.0
RADIO 1.64.06.04
Any ideas?
Click to expand...
Click to collapse
I can confirm similar difficulties with many ROM/Radio combinations. One difference for me, though: it's VERY rare for me to get the HSDPA icon anymore. I can get EDGE via most radios, but establishing a GPRS connection in general is also difficult. Often I'll get data working, only to find that the phone connection no longer works!
I've tried using PAP and CHAP, many different radios, many different ROMs, isp.cingular, wap.cingular, entering settings as MEdia Net, entering them as My ISP. Turning proxies on and off has no effect.
There was a ROM I used here ages ago (seems that way, anyway) that gave me excellent HSDPA coverage. I'm still trying to find it in the forums so I can flash back to it.
I'm using an AT&T Tilt in San Francisco. Is there anyone else here in my neck of the woods who's getting HSDPA?
If so, please post your settings! wap? isp? chap? pap? radio version? ROM version?
Thank you!
If you first connect with IE and then with IE still open attempt a quickgps update will it work then?
GGW69 said:
If you first connect with IE and then with IE still open attempt a quickgps update will it work then?
Click to expand...
Click to collapse
Yes: When it does work, the EDGE connection I establish will work with any app. However, it may take a while for any signal to be found. Should I be limiting my BAND settings, or allowing it to run on Auto/Auto?
chaosniner said:
Yes: When it does work, the EDGE connection I establish will work with any app. However, it may take a while for any signal to be found. Should I be limiting my BAND settings, or allowing it to run on Auto/Auto?
Click to expand...
Click to collapse
I should add that I've now tried:
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_65.14.06_CubeV2_
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_65.14.06_No_CubeV2_
Using radio 1.65.14.06 here in San Francisco I get only EDGE, with a little triangle that I assume indicates that it's roaming. Roaming here, where I used to get very fast HSDPA? What on earth is wrong with my poor Tilt?
Ditto for 1.64.08.21 with Dutty's ROM above. Though with that radio I used to get better performance (i.e. no roaming) from another ROM.
Side question: I continue to see TNT's logo when I restart my Tilt, despite re-flashing both the radio and the ROM several times. The radio version changes, but the TNT logo sticks around. I've also done a hard reset after flashing these ROMs. Any help?
Just a silly idea...
I had the same problem. The login (username and password) was wrong. in fact, the password from the modem account...
StealthNet said:
Just a silly idea...
I had the same problem. The login (username and password) was wrong. in fact, the password from the modem account...
Click to expand...
Click to collapse
Not a bad idea at all. However, I've tried lots of combinations and I don't think the password is the issue.
I found the ROM I used a while back that used to give me lightning-quick connections: XDA Live 1.2. I re-flashed to that one (along with the 1.27.14.09 radio it came with). It immediately gets full bars of 3G (the "H" icon is still disabled in the registry, I believe), but I'm unable to (1) get anything other than EDGE to connect to GPRS and (2) unable to place/receive any calls while it's on 3G mode. If the signal gets weak enough to drop to E, I can make/receive calls.
This is worrisome because that ROM/Radio combination used to work great for me. Is it possible that something on my account was altered at some point, preventing me from accessing proper 3G? Even if that were the case, why would that prevent my voice calls from going through?
chaosniner said:
Not a bad idea at all. However, I've tried lots of combinations and I don't think the password is the issue.
I found the ROM I used a while back that used to give me lightning-quick connections: XDA Live 1.2. I re-flashed to that one (along with the 1.27.14.09 radio it came with). It immediately gets full bars of 3G (the "H" icon is still disabled in the registry, I believe), but I'm unable to (1) get anything other than EDGE to connect to GPRS and (2) unable to place/receive any calls while it's on 3G mode. If the signal gets weak enough to drop to E, I can make/receive calls.
This is worrisome because that ROM/Radio combination used to work great for me. Is it possible that something on my account was altered at some point, preventing me from accessing proper 3G? Even if that were the case, why would that prevent my voice calls from going through?
Click to expand...
Click to collapse
Interestingly enough, AT&T's support site recommends using NO username/password, and enabling IP Header Compression.
When I try this, it works on some occasions, but most often I get:
Dialed: wap.cingular
The answering modem has disconnected.
I too am having a similar problem. I updated to Dutty's and Laurentius's new roms and have been having the same problems.
under connection settings for selected networks chane from my isp to media net.
also some roms don't have att connection settings built in so u might have to install them using a cab.
Hello,
i have a strange prob. on my o2 xda Diamond...(on o2-de)
When i start a Data 3G Data Session the Diamond will switch to HSDPA when Data is transfered..... works gerat.... but when the Data transfer is Idle the Diamond switches Back to 3G (this is how it should be....configured by the Network Operator) BUT then when Data is transferred again the Diamond switches to HSDPA for a short while and nothing happens.... the connection seems stuck.....
Somtimes the Data begins to flow after some Minutes, sometimes I have to dis/reconnect manually.
After a manual reconnect the Connection works immideately....but then.... the Problem appears again..
Is there anyone who encountered the same Prob?
P.S.: Yes, i did a HardReset and triple checked all Connection entries...
Same for me on the o2 branded original german rom. But now I'm flashing the DiamondProjectTeam-ROM.
Maybe the bug were fixed in the course of time.
Phew.... so I´m not alone with this Problem...
Im not quite shure if this problem was there a week ago.....
Even if i Update the Wheather Widget two times in a short interval (after fallback to 3G) the connection is stuck....
As far as I remeber this wasn´t the case a week ago after i got the Diamond.
Pleas Report if the cooked ROM behaves different...
Regards, Jan
Yes jkb770 ...
let me set up the settings on the new ROM. After that I will edit this post and report ...
.Edit.
Hey guys, sry for the delay ... But I was very busy.
After flashing to DiamProj V1 I determined no difference
But I was very surprised when I surf with PIE. There was no problem to be idle for a while. PIE connected immediately to the requested page; without reconnecting. Maybe is a opera problem? I tried it with the newest version of opera (9.5.1522), no success.
Great!
Thanks in advance...
...im just installing the unsingned HARDSPL......
German
Hmmmm it seems to be no WWE ROM
No German UI
And i still have the HSDPA Idle Prob...
..Nah.... worth a try
As far as I know this is normal behavior. If there is no data transfered the "3G" symbol is shown as indicator and as soon as there is data transfer the "H" symbol will be displayed in case HSDPA is available.
I can remember I also read this somewhere in the manual of my TyTN.
This is also no disadvantage because transferring no data with HSDPA or UMTS will take exactly the same time.
Read...
The Problem is that after the idle (fallback to 3G) the Connection freezes....
Means..... after every fallback from HS to 3G no Data will ever flow until disconnect...
Sorry, I missed that part somehow
My E90 use to do same thing aswell. Am on 3 network in UK.
I think its network deponded, not some think to do with handset.
Edit on post #4: http://forum.xda-developers.com/showpost.php?p=2398651&postcount=4
exactly same problem here, connection freezes after few minutes, works absolutely fine after reconnecting. Has anyone found a solution for this problem yet?
HTC Diamond with Duttys ROM v1.8, radio 1.00.25.07; and I am on O2 network in UK
Oh and one more thing. I don't encounter this on my Stellar (Kaiser) with exactly same network settings. I will try different SPL today. Will update after.
Regards,
did you guys try do install the new O² HTC Rom Update? 1.93 is the version, maybe it will fix that issue you guys have.
i barely use my diamond for surfing over hdspa - only wifi - so i can't tell about this problem.
btw hello, i'm the new guy
Hello to the new guy.
Now I have changed the Hard SPL 1.24, different radio as well and the problem still exists!
When disabled HSDPA and working only on 3G everything is perfect. Is it only problem with O2 network or has anyone experienced it with any other networks? (but then again, if it was a network problem Kaiser would have the same problem but it DOESN'T) I don't know what to do next...
At least it seems it's not just me experiencing this problem!
My connection also gets stuck when switching back to HSDPA (not always though) and this seems to be causing issues when I connect to my office VPN aswell (when i try to complete data intensive tasks).
I'm 99% sure it's caused by the phone and not the network operator since I've used an older model HTC with my current SIM (Vodacom) and I don't experience this at all then. But when I put a different operator SIM (MTN) in my Diamond I also get this problem.
Anyone figure out what it could be yet?
so looks like it's the phone's fault...
hehe... am not alone in this...i think its network dependent.. ve
tried several hsdpa device, usb modem.. same ...
There should be a kind of solution maybe a software that will keep injecting data requests at intervals to keep hsdpa from falling back to 3G..
bR
My problem is definatly not network related. I've tried with another HTC Touch Diamond (on another network) and I've got the same issues connecting the VPN.
It really seems as if the phone has a problem dealing with large chunks of data (or a certain type of data).
Don't know if this makes sense but that's just my experience with it sofar...
so is there any solution for our problem?
This is driving me crazy
I have the same problem as you guys on my X1. I've tried almost everything and nothing works. Has anyone found a solution to this?
Hi, the search button has failed me. (Two posts in 2 years isnt too bad is it?)
My issues is.... accessing the internet over 3g works fine (and HPSDA) Internet, push mail everything... however, If I drop out of coverage at any time my internet connection vanishes as to be expected. However once connection is re-established still the Internet fails to work. It shows connected to 3G or HPSDA but all websites time out and Activesync reports waiting for network.
The fix is to go Start>Settings>Connections>Connections>Manage my existing connections.
Then I simply "Next" thru all the settings until I get to the end. Press Finish. The data connection drops and the re-establishes and Im working again!?!! Very Annoying!
Im running. Duttys 6.1 Rom (April) and a few bits a pieces (It happens with nothing installed also and with another ROM I tried in desperation!) T-Mobile UK
Does this sound like a Radio issue to you guys? Should I try another Radio or Ditch Dutys Rom? (Which I love)
Any help gratefully accepted.
If Downgraded to WM6 (T-Mobile stock ROM) and Im still having this issue. Very frustrated.
I've found a few posts from the US who seem to have the same sort of issue. 3g does not recover after dropping out of service.
http://forums.wireless.att.com/cng/...thread.id=88007&view=by_date_ascending&page=1
Not sure what to do now...
I've had the same sort of thing, I just disconnect (Long press on the red End call key or click on the 3G icon in the top bar and hit disconnect), and let it reconnect.
I have exactly the same issue with mine as well and its only started recently. I too have found the only way to fix it is to go through and 're setup' the connection. Disconnecting and reconnecting, rebooting all seem to do nothing...
marcopolo007uk said:
If Downgraded to WM6 (T-Mobile stock ROM) and Im still having this issue. Very frustrated.
I've found a few posts from the US who seem to have the same sort of issue. 3g does not recover after dropping out of service.
http://forums.wireless.att.com/cng/...thread.id=88007&view=by_date_ascending&page=1
Not sure what to do now...
Click to expand...
Click to collapse
Are you abled to make a voice call over 3G...?!
Noxious Inc. said:
Are you abled to make a voice call over 3G...?!
Click to expand...
Click to collapse
I think so... however, Im such a light "voice" user I never really notice... I'll double check the next time it goes. IE When I get a cuppa tea at the office..
marcopolo007uk said:
I think so... however, Im such a light "voice" user I never really notice... I'll double check the next time it goes. IE When I get a cuppa tea at the office..
Click to expand...
Click to collapse
Which symbol is most of the time in the top of your screen G/E/3G/H...?! Check this one out also --> my 3G issue
I usually have a H (1 or 2 bars), when walking around my office this can drop to a 3G connection at times.
If I head to the basement, I drop to the Areial symbol or completely disconnect.... When the H or 3G connection starts again my Data connection fails as described above.
(However, I am able to make normal outgoing voice calls, not tried incoming yet)
Ok, I think I have a work around that seems to be working for me.
I set my BAND to GSM only as a test.... and it worked for the whole day, when I dropped into a NO SERVICE area the data connection dropped. When it recovered my data connection was back and working.
Obviously GSM is too slow, so I've now set my BAND settings to;
Network Type - WCDMA
UMTS Band - UMTS(2100+800)
And also diasabled HSDPA.
Currently everything seems ok... Now my connection does not drop from HSDPA>3G>G and back up again it seems to work fine?? Seems the issue may be with switching between the GSM standards??
I realise I wont get coverage in GSM only area's, but consistant data (Push Email) is just as important to me.
I've the same problem, but changing settings to gsm only is no solution. In this case I have to restart my Kaiser to get a new working connection.
I also have many Problems since updating to wm 6.1. Can I downgrade to the original german 6.0 or is there a really stable german 6.1 out there?
I've been getting the same problem as well for the past month or so.
Have been 'fixing' the problem by either putting the phone into airplane mode and back again, or rebooting the phone.
It's getting quite annoying though
Stopping the phone dropping to GSM seems to work for me. Leaving me with HDSPA and 3G.
I'm lucky to be in a good 3G coverage area I guess.
Im not sure who we should log this issue with? Carrier or HTC?
Are we all on T-Mobile having this issue?
i'm on o2 germany and a one day test with t-mobile didn#t show this error
with o2 i have this problem about three times a day
any new ideas since july ?
Sometimes i want to throw my phone away.
I'm still having the problem as well. Has anybody figured out a solution?
A strange problem..
I recently got GPRS activated on my sim..
When i try connecting on my Diamond, the E becomes active and it tries to connect.. But after abt 30 secs to a min, it says "Cannot connect for an unknown reason... etc etc.."
I initially thought it was a problem with the network..
But, when i put the same sim in my old Asus P525, set up the connection and tried to connect, the G became active and got connected within a few seconds!!!
From then i've been tryin to connect on my Diamond and have got connected about twice with E in the signal bar.. But that must've been some freak accident cos after a few hours i tried connecting w/o changing any of the settings and absolutely no luck!
I've tried almost all the cooked ROM's. And different radios.
Right now i'm on the Official WWE ROM 1.93.
Hard SPL 1.23 or 1.24.
And 1.00.25.03 Radio.
Any idea about what's wrong, guys?
Make sure you have the correct GPRS/WAP settings installed on your HTC Diamond.
There are different settings for Payandgo and Contract SIM cards.
You can try searching Google for them, or if you live in the UK try this website: http://www.filesaveas.com/gprs.html
prank1 said:
Make sure you have the correct GPRS/WAP settings installed on your HTC Diamond.
There are different settings for Payandgo and Contract SIM cards.
You can try searching Google for them, or if you live in the UK try this website: http://www.filesaveas.com/gprs.html
Click to expand...
Click to collapse
prank1, the settings are right..
That's why it's working on my old phone..
I think it may have somethin to do with Edge and GPRS..
Maybe my service provider does not have Edge capabilities..
If i'm able to restrict my Diamond to try and connect to Edge and connect to GPRS instead, it may work..
Any way that could be done?
sanctifiedrust said:
A strange problem..
I recently got GPRS activated on my sim..
When i try connecting on my Diamond, the E becomes active and it tries to connect.. But after abt 30 secs to a min, it says "Cannot connect for an unknown reason... etc etc.."
I initially thought it was a problem with the network..
But, when i put the same sim in my old Asus P525, set up the connection and tried to connect, the G became active and got connected within a few seconds!!!
From then i've been tryin to connect on my Diamond and have got connected about twice with E in the signal bar.. But that must've been some freak accident cos after a few hours i tried connecting w/o changing any of the settings and absolutely no luck!
I've tried almost all the cooked ROM's. And different radios.
Right now i'm on the Official WWE ROM 1.93.
Hard SPL 1.23 or 1.24.
And 1.00.25.03 Radio.
Any idea about what's wrong, guys?
Click to expand...
Click to collapse
My bad - didnt see the 'set up connection' bit so I assumed you didnt have the correct settings.
I had this problem once but it went away with a ROM upgrade - that was when I had the XDA Orbit.
The problem may be that my phone does not try connecting to GPRS and directly tries to connect Edge..
Isn't the connection supposed to be G-E-3G, in that order?
Is there any way i can prevent my phone tryin to connect to Edge?
Can i make GPRS as first preference instead?
Anybody? Please?
From what i heard my diamond doesn't support US( or Canada which is where i live) 3g because of diamonds hardware so that's why it only connects to edge which is really slow... anyways to connect i had to phone rogers my wireless provider and they gave me my username and password which was needed to connect online. So i'm guessing it's the same for you if you go to
Settings > Connections > rogers internet( for mine) > Manage existing connection
from there you'll go to the next page where you can input your info.
NekciuQ said:
From what i heard my diamond doesn't support US( or Canada which is where i live) 3g because of diamonds hardware so that's why it only connects to edge which is really slow... anyways to connect i had to phone rogers my wireless provider and they gave me my username and password which was needed to connect online. So i'm guessing it's the same for you if you go to
Settings > Connections > rogers internet( for mine) > Manage existing connection
from there you'll go to the next page where you can input your info.
Click to expand...
Click to collapse
Hey.. That doesn't seem to be the prob since i can get it to work on my old PDA with the same settings..
That phone gets connected and it shows 'G'.
What might help me is somethin to block my phone tryin to connect to Edge before it even tries to connect to GPRS..
I don't think that's practical, but wishful thinking..
I've had the same issue with my Diamond, I know for sure that the network settings are correct as it sometime connects fine and other times I keep getting the "Cannot connect for an unknown reason..." error- only a soft reset would resolve the issue. Seems a bit random but am trying to monitor what is causing it.
It always used to work fine on my Hermes. BTW I'm using Dutty's ROM on my Diamond.
sh500 said:
I've had the same issue with my Diamond, I know for sure that the network settings are correct as it sometime connects fine and other times I keep getting the "Cannot connect for an unknown reason..." error- only a soft reset would resolve the issue. Seems a bit random but am trying to monitor what is causing it.
It always used to work fine on my Hermes. BTW I'm using Dutty's ROM on my Diamond.
Click to expand...
Click to collapse
Yeah.. Sounds almost like my prob..
Could it be a rare manufacturing defect sort of thing thats affecting our phones?
Cos nobody else seems to have such an issue..
And i keep changing between Dutty's and Panosha's ROM..
I don't know if it's same problem you have ,
but I had kinda same problem..
I found that the lame ActiveSync change the proxy of my internet connection and put in the internet connection proxy my local proxy at work, even I removed the proxy it didn't help (dunno why) , just by adding new connection from the advance and adding new name etc.. it solve the problem...
sanctifiedrust said:
And i keep changing between Dutty's and Panosha's ROM..
Click to expand...
Click to collapse
I've only had my Diamond (MDA Compact IV) for only about 3-4 weeks. I was so keen to flash to a different ROM that I did so within 10-15 hours of receiving the device; my point being that I didn't get to try out my data connection on the stock T-Mobile ROM.
The connection seems to be fine today...!
arix said:
I don't know if it's same problem you have ,
but I had kinda same problem..
I found that the lame ActiveSync change the proxy of my internet connection and put in the internet connection proxy my local proxy at work, even I removed the proxy it didn't help (dunno why) , just by adding new connection from the advance and adding new name etc.. it solve the problem...
Click to expand...
Click to collapse
Hmmm.. I don't think i have the exact same problem, but somethin similar..
I'll try adding a new connection..
Thanx..
As I know something with Activesync **** the GPRS connection..
Let us know if you solve your problem with new connection...
Ok.. Note the "E" in the first pic and in the second..
The first one is 'clear' and the second one is 'hazy'!
When the "E" is 'clear', my GPRS connects!!!
I found this out after putting a different sim card of a different network and connecting..
When i put the other sim card, i got 'clear' "E" and GPRS worked..
Then i put back my old sim card and on switching on the phone, the "E" was still 'clear'!!
On tryin to connect, it worked!!!! Even after several manual diconnections, it worked only cos the "E" was still 'clear'..
Then i reset my phone with my sim card and got the 'hazy' "E".. And back to square one.. Not connecting..
My question is, what does this 'hazy' "E" mean and how do i make it 'clear'???! Only then my GPRS seem to work!
Help!!!!!!
This is how it is when connected properly..
Cannot connect for an unknown reason
I also had this problem. To make my story short, I have a data plan with Claro Peru which I have been using with my Touch (not 3G phone) with no problems. 3 days ago I acquired my Diamond 3G US version. When attempted to connect to the HSDPA I got the error mentioned here (cannot connect for..., sometimes the "H" symbol was difusse [like in the picture in a previous post in this thread], etc). The root cause of this was that my data plan only have GPRS/EDGE activated, my network provider (Claro) differentiates 2G internet vs 3G (so no HSDPA/UMTS until subscribing to a new plan).
The **SOLUTION** for my case was to select under "Select your network type" the option GSM (Start, Settings, Phone, Band tap). The option Auto was the default. Thus restricting to EDGE my data connection (which is according to my plan). Also, on the same tap I selected UMTS(850+1900)+GSM(850+1900) under "Select you GSM/UMTS band". You have to select here the frequencies according to your country.
P.S. The problem was the same before and after I updagred my ROM to RUU_Diamond_HTC_WWE_2.03.405.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship. So, two things to mention here. 1, A ROM upgrade is not the solution for this problem (in my case). 2, you can upgrade the Diamond US version (my is DIAM110) with a WWE ROM upgrade.
Hope this help someone.
dach said:
I also had this problem. To make my story short, I have a data plan with Claro Peru which I have been using with my Touch (not 3G phone) with no problems. 3 days ago I acquired my Diamond 3G US version. When attempted to connect to the HSDPA I got the error mentioned here (cannot connect for..., sometimes the "H" symbol was difusse [like in the picture in a previous post in this thread], etc). The root cause of this was that my data plan only have GPRS/EDGE activated, my network provider (Claro) differentiates 2G internet vs 3G (so no HSDPA/UMTS until subscribing to a new plan).
The **SOLUTION** for my case was to select under "Select your network type" the option GSM (Start, Settings, Phone, Band tap). The option Auto was the default. Thus restricting to EDGE my data connection (which is according to my plan). Also, on the same tap I selected UMTS(850+1900)+GSM(850+1900) under "Select you GSM/UMTS band". You have to select here the frequencies according to your country.
P.S. The problem was the same before and after I updagred my ROM to RUU_Diamond_HTC_WWE_2.03.405.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship. So, two things to mention here. 1, A ROM upgrade is not the solution for this problem (in my case). 2, you can upgrade the Diamond US version (my is DIAM110) with a WWE ROM upgrade.
Hope this help someone.
Click to expand...
Click to collapse
I have the Diamond on T-Mobile in the UK with the web'n'walk plan (HSDPA enabled - although not the higher-speed "plus" version). This happens to me every single time I'm in a GPRS-only area - when I have HSDPA coverage, it connects fine. In order to get it to connect, I have to open the Comm Manager, turn off the data connection and re-activate it.
Before anyone asks, my connection settings are all correct and I've tried numerous different main and radio ROMs - nothing makes a difference. I'll give this a shot, see if it makes a difference.
BLCollier said:
I have the Diamond on T-Mobile in the UK with the web'n'walk plan (HSDPA enabled - although not the higher-speed "plus" version). This happens to me every single time I'm in a GPRS-only area - when I have HSDPA coverage, it connects fine. In order to get it to connect, I have to open the Comm Manager, turn off the data connection and re-activate it.
Before anyone asks, my connection settings are all correct and I've tried numerous different main and radio ROMs - nothing makes a difference. I'll give this a shot, see if it makes a difference.
Click to expand...
Click to collapse
OK, I would try the option Auto for the "Select your network type" so the phone auto negotiates the technology in use (between GPRS or the much better HSDPA), but change the option for the bands according to your country.
Let us know the results!