Hi,
i try to update my rom wish love, work great, next step, i upgrade wish shelltoll,
but know my qtek 9100 can't boot anymore .... i have the love rom boot picture, i try to load the boot mode, and connect, upgrade but, don't work...
i give my qtek to the trash ?
(sorry for my bad english)
kevin973 said:
Hi,
i try to update my rom wish love, work great, next step, i upgrade wish shelltoll,
but know my qtek 9100 can't boot anymore .... i have the love rom boot picture, i try to load the boot mode, and connect, upgrade but, don't work...
i give my qtek to the trash ?
(sorry for my bad english)
Click to expand...
Click to collapse
Read and follow this thread. It should get you back a working phone:
http://forum.xda-developers.com/showthread.php?t=298613
kevin973 said:
Hi,
i try to update my rom wish love, work great, next step, i upgrade wish shelltoll,
but know my qtek 9100 can't boot anymore .... i have the love rom boot picture, i try to load the boot mode, and connect, upgrade but, don't work...
i give my qtek to the trash ?
(sorry for my bad english)
Click to expand...
Click to collapse
As long as it powers up.....your device is alive.
Go into boot mode, disconnect your activesync in the coonections, install your factory rom to get running again. I you STILL want to use the shell tool....its safe to do so. Make sure you install the cab files that come with the shell tool 1st before using the shell tool.
hi! thank you!!!! know i can't flash again, but i try the Wmobile 6 rom, but them stop at 99% (connexion trouble...) i try 3 times, but alway the something,
I'll using windows mobile 2005
thank you again!
Related
I just flashed my Qtek 9100 with the T-mobile rom "RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe" from the ftp. I have tested a lot of different roms without trouble. But after the flash my Qtek is stuck at the bootscreen just displaying
IPL 1.06
SPL 1.06
GSM 01.12.10
Tried a hardreset and it says format complete but after a reboot I am stuck at the bootscreen again. I am terrified - can I make my beloved qtek to work again or is it just a piece of expensive junk now ?
Sorry, stupid me I was as easy as start in USB mode and reflash and it booted normally again
easycure1974 said:
I just flashed my Qtek 9100 with the T-mobile rom "RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe" from the ftp. I have tested a lot of different roms without trouble. But after the flash my Qtek is stuck at the bootscreen just displaying
IPL 1.06
SPL 1.06
GSM 01.12.10
Tried a hardreset and it says format complete but after a reboot I am stuck at the bootscreen again. I am terrified - can I make my beloved qtek to work again or is it just a piece of expensive junk now ?
Click to expand...
Click to collapse
I am in the same situation now..
I am trying to re-flash the original ROM now, enter the booloader menu by holding voice-dial+CAMERA while resetting. then connect USB an try to re-flash.. It works for 30 minutes now without luck, I don't know what to do either... HELP!!
and a hint to those that are NEW: if you want to screw up your device, play with ROM upgrades... you will end up like us..
easycure1974 said:
Sorry, stupid me I was as easy as start in USB mode and reflash and it booted normally again
Click to expand...
Click to collapse
PLEASE help me, what utility did you use to reflash?
Just press the camerabutton and reset and then you will come to the USB mode and then just used the flash utility file again and start the flash again and then it shall work.
I used the RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe form the ftp once again and it worked
easycure1974 said:
Just press the camerabutton and reset and then you will come to the USB mode and then just used the flash utility file again and start the flash again and then it shall work.
I used the RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe form the ftp once again and it worked
Click to expand...
Click to collapse
doesn't work form me because I didn't unlock before it crashed.. now I can't re-flash it..
ok, but then use the right official flash for your device - if it is a qtek use a qtek flash or imate if it is an imate device. The most flash files is available on the ftp.
easycure1974 said:
ok, but then use the right official flash for your device - if it is a qtek use a qtek flash or imate if it is an imate device. The most flash files is available on the ftp.
Click to expand...
Click to collapse
10x easycure, you are an easy cure for my troubles I am downloading it and I am sure it will work this time ( have a QTEK 9100)
Another question: did RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe upgrade your radio ROM as well? what machine do you own? I think of flashing it eventually as well..
I hope it will work for you!
Yes the t-mobile upgraded everything - but it has a lot of crap in the extended rom that I don´t like and with the new rom versions it doesn´t seem possible to delete anything from the extended rom.
So I will flash it again when a newer flash from qtek is available. Tried the Qtek_9100_1_6_7_ENG.zip rom but it is just OS - I dont like the idea of using OS from Qtek and the rest of the software from some other brand.
I have a swedish Qtek 9100
easycure,
I don't like the crap either but I found someone's suggestion to soft reset the device just before installing software from extended ROM (just after aligning screen). I just had to install some CAB's manually to get MMS support etc.
Hope this helps you also
Priit said:
easycure,
I don't like the crap either but I found someone's suggestion to soft reset the device just before installing software from extended ROM (just after aligning screen). I just had to install some CAB's manually to get MMS support etc.
Hope this helps you also
Click to expand...
Click to collapse
I tried that but I didn´t got the mms to work with that but then I shall make another try with that!
I installed Shortcut-MMS1-JAVA6XX-CV-VOICE-EmailWiz-TMO-03Nov05.CAB to get MMS support. I also installed coouple of CABs that had "Camera" in the name hoping it will improve camera functionality or something
Please Help!!
I tried to use the aWizard utility and I did the RAPI and CID unlock and tried to install the 1.6.7.1 to my qtek with the original sept 22nd rom. It froze while doing the upgrade (after 3 or 4 mins) and now it gets stuck at the splash screen but it shows the 1.6.7.1. It does not connect via USB anymore and I can only soft reset or hard reset and it goes back to the qtek splash screen and hangs.
Do I have a paperweight?? Is there anything i can do without it being able to connect to USB??
Any help would be appreciated.
Riker.[/b]
Enter Bootloader, - hold the "camera" and shortly press the reset button, don't release "camera" until you can see color screen, connect USB cable, and start to flash any ROM you like from ftp...
Thanks for your help!! It worked perfectly!! I am a long time 'viewer' and have loved all the knowledge that is available on these forums!!
I hope this helps out anyone else who is in a similar situation and is scared they have destroyed their device.
Boy am I relieved!!!
Riker.
OK
Try this funny rom:
ftp://xda:[email protected]/Up...TOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Re: Tried to Upgrade rom --> Crashed --> Now DEAD!! HE
riker said:
Please Help!!
I tried to use the aWizard utility and I did the RAPI and CID unlock and tried to install the 1.6.7.1 to my qtek with the original sept 22nd rom. It froze while doing the upgrade (after 3 or 4 mins)
Riker.[/b]
Click to expand...
Click to collapse
Hi Riker,
The upgrade takes 10 to 20 minutes to complete. If you stop it before it say finish then.... u have to flash ur device all over using upgrade program.
Button said:
OK
Try this funny rom:
ftp://xda:[email protected]/Up...TOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Click to expand...
Click to collapse
Thats unfare!
I may try somethings, but i'm not installing a new rom, without at least knowing what its going to do? :lol:
CID-unlock your Wizard first, please.
hey man..your lucky u got urs to work straight away
im stuck exactly where u r but now when i upload the new rom...nothing happens still..think its because i didnt do cid unlock...but it did say CID is unlocked on your phone now....
well...i just cnt get wait to get this dead 9100 to be bk up again..
Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !
Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.
It doesn`t work too, it always stops at 95% has anyone another idea?
did you try hard reset?
Yes i tried hard reset, but it is always in bootloader!
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079
Sorry but i do not speak hungarian. What do you want to tell me ?
I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???
oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???
Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!
that link is broken
Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!
Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!
Musna do you have any massage such as msn
Hey guys i tried to update my rom and while the update stops in 99% and said updtae ultiality Error.
now my Telefone doesn't start and stay in the 3 Colors Screen.
please Help
Hey,
i´ve the same Problem.
I wanted to flash my MDA Vario, but it stops at 99%.
Now, I can´t start the phone and I can´t connect it to ActiveSync.
So I can´t flash it again.
When I want to flash an older ROM, there came a fail.
Sorry for my bad english I´m from Germany... I tried my best ;-)
FloStilo said:
Hey,
i´ve the same Problem.
I wanted to flash my MDA Vario, but it stops at 99%.
Now, I can´t start the phone and I can´t connect it to ActiveSync.
So I can´t flash it again.
When I want to flash an older ROM, there came a fail.
Sorry for my bad english I´m from Germany... I tried my best ;-)
Click to expand...
Click to collapse
Always post the vital data of the phone,which is your device,G3 or G4,post the present IPL/SPL...? of the phone.Which rom you were trying to flash ?Does your phone get into bootloaders (tricolor screen) ?
It won't activesync in bootloaders or in the absence of a working rom (OS),but its possible to flash a rom in bootloaders.Download the official rom from the carrier's site and flash in the bootloaders to recover back to its default status.
Cheers!
Hi there, I installed "RUU_Rhodium_HTC_ARA_1.19.415.1_Radio_Rhodium_3.44.25.27_Signed_Ship" on my phone, and now it is stuck on the reboot screen, and it keeps rebooting constantly. it won't boot anymore.
I tried to install a different Rom, and it still won't boot.
I tried the hot fix rhodium radio 3.46.
I tyried SPL loader. no luck
Any help is greately appreciated.
Do you have Hard SPL?
Have you tried re-flashing the stock ROM for your device, not just "another" ROM?
Dave
yes I have, I tried both.
How I got it to work, is by using rollback SPL.
But now I can not load the Arabic ROM anymore
Because I used my 1 trial.
Is there any way for me to install the Arabic ROM?
ericsson12 said:
yes I have, I tried both.
How I got it to work, is by using rollback SPL.
But now I can not load the Arabic ROM anymore
Because I used my 1 trial.
Is there any way for me to install the Arabic ROM?
Click to expand...
Click to collapse
Can you boot Windows Mobile? If not, can you re-flash your carrier's ROM (hopefully they have a Ship Exe) whilst in the bootloader (see the Rhodium wiki pages)?
Ta
Dave
Have you tried Mtty?
Mine got stuck at bootloader a couple of days ago, because my computer hang in the flashing.
Second time Mtty saves me
I am able to boot into windows now, but i am unable to load the Arabic ROm.
Help please
I've had something similar.
But my phone kept reinstalling itself every time it booted.
Now I know this was a diamond, but I think it might help.
Maybe someone else could look at this as well and give his opinion about it.
The thread about this case is here http://forum.xda-developers.com/showthread.php?t=493131
Hope that helps
i had this problem.. the only way that seemed to work with me is flash stock spl then flash rom.. once the rom is flashed succ run the arabic localization.. finish it n the re-flash hspl.. thats is the only way around it.. i think there's a conflict between the ara setup n hspl.. dont know if it'll work with u, but did with me since my device accepted the rom in stock spl.. hope it works for u ;-)