Related
Hello :
When im sending a mail or sms i write the frist letters of the contact and start to apear the name.
If i got more than on with the same mame i got ... (3 points) , what i have to do to see the others ?
If i got a william apple, and a wiliam beta it only shows the william apple and ....
Thnks , may be this got a easy anser but....i cant find.
I have the same problem as yours. Is this a bug in Diamond because I haven't had this before with my Tytn II?
type "william" then press and hold the space key to get a " " (space); then type "b" to get wiliam beta.
press space key without holding it will select willam apple in your example.
I will Try ...but it should apear a list to select....
thnks
galinha said:
I will Try ...but it should apear a list to select....
thnks
Click to expand...
Click to collapse
i too feel it should, but, either the feature is not there or I've not found the correct procedure to get the list.
xwaiz said:
type "william" then press and hold the space key to get a " " (space); then type "b" to get wiliam beta.
press space key without holding it will select willam apple in your example.
Click to expand...
Click to collapse
space dont work....its like enter just select the first wiliam...
galinha said:
space dont work....its like enter just select the first wiliam...
Click to expand...
Click to collapse
yes... same here
While inputting the name, just press left or right to scroll the name list.
galinha said:
Hello :
When im sending a mail or sms i write the frist letters of the contact and start to apear the name.
If i got more than on with the same mame i got ... (3 points) , what i have to do to see the others ?
If i got a william apple, and a wiliam beta it only shows the william apple and ....
Thnks , may be this got a easy anser but....i cant find.
Click to expand...
Click to collapse
yes...press Menu->Check Names. OK?
Guys, what you are all refering too is the famous t9 bug. (already in TytnII diamond ROM releases)
Look for "disable t9" cab , run it and use original (not Diamond) keyboard and you'll see ALL names when one or two or more letters are typed.
You will also have word completion / suggestion running than.
it is a workaround as there seems to be no full solution yet to have all names visible with t9 enabled in Diamond KB mode
cayotte said:
While inputting the name, just press left or right to scroll the name list.
Click to expand...
Click to collapse
Sorry how i scroll ?
galinha said:
Sorry how i scroll ?
Click to expand...
Click to collapse
Press the left or right or down button to see another contact.
I have been searching about this issue and only managed to find this thread. Has this by any chance been solved? It is annoying me to no end. The Left or right button press dows not do it for me!
If I have "Adam Alpha" and "Adam Beta" in my contacts list there seems to be NO WAY to choose Adam Beta except through the add recepients function in the menu. On my old touch, I used to be able to add receipients by simply typing the first few letters of a contact and the list of contact options would show up! This sux so bad now! If I type in the name, there is simply NO way at all to get "Adam Beta"...you can only get Alpha!
Grrrrrr.... Using that cab and the WM keyboard is not a solution for me....I need a thumb capable solution....
eskasi said:
I have been searching about this issue and only managed to find this thread. Has this by any chance been solved? It is annoying me to no end. The Left or right button press dows not do it for me!
If I have "Adam Alpha" and "Adam Beta" in my contacts list there seems to be NO WAY to choose Adam Beta except through the add recepients function in the menu. On my old touch, I used to be able to add receipients by simply typing the first few letters of a contact and the list of contact options would show up! This sux so bad now! If I type in the name, there is simply NO way at all to get "Adam Beta"...you can only get Alpha!
Grrrrrr.... Using that cab and the WM keyboard is not a solution for me....I need a thumb capable solution....
Click to expand...
Click to collapse
Have you tried the check names option in Menu?
saveferris said:
Have you tried the check names option in Menu?
Click to expand...
Click to collapse
Thanks save ferris....I didn't realize that option was available....helps. However, it is still two keypresses longer than before. You have to press menu, and then check names....before, if you just typed in Ada, the names/options would show up to choose from immediately....
It seems to be a step backwards in design to me. I was just wondering if there was some kind of potential registry fix to show more options...
Hey Folks
I upgraded to the official Hong Kong ROM upgrade on my HTC Diamond & whilst impressed by the speed improvements I have a major bug that annoys the hell out of me & thus hope some genius reading this can help fix the problem
On the home tab using the "phone" icon it then shows recent calls. However the left hand button that used to show "contacts" now shows "video call". I never want to make a video call & contacts is far more useful .... but there is no obvious way to change the function
Hoping someone can help
Chill dude.
This ain't a bug, it's a feature.
Personally, I do find video-call usefull, but ill prefer "send SMS"
Do U really need contacts? You can use the keypad T9 to find the person U want to call easily...
Circle your finger around the middle button and it rips thru contacts!
kgb-agent said:
On the home tab using the "phone" icon it then shows recent calls. However the left hand button that used to show "contacts" now shows "video call". I never want to make a video call & contacts is far more useful .... but there is no obvious way to change the function
Click to expand...
Click to collapse
Use your favorite registry editor to navigate to [HKLM\Software\HTC\Manila] and change the following values:
"HomeLSKPath=addrbook.lnk" 'that's the application you want to use
"HomeLSKText=Contacts" 'that's the text that will be displayed on the left soft key on your Home screen
Do a soft reset.
Now your Left Soft Key will display Contacts, so when you press it, you shoul go directly to your contacts. Enjoy!
I've changed mine to Comm Manager.
heretic said:
Use your favorite registry editor to navigate to [HKLM\Software\HTC\Manila] and change the following values:
"HomeLSKPath=addrbook.lnk" that's the application you want to use
"HomeLSKText=Contacts"
Now your Left Soft Key will display Contacts, so when you press it, you shoul go directly to your contacts. Enjoy!
I've changed mine to Comm Manager.
Click to expand...
Click to collapse
Are those for the phone app or home sceen?
Blazeitup123 said:
Are those for the phone app or home sceen?
Click to expand...
Click to collapse
Those are for the home screen (Home tab of Manila TF3D).
heretic said:
Those are for the home screen (Home tab of Manila TF3D).
Click to expand...
Click to collapse
Do you know the keys for the phone app? I bet there are 100 people wanting those. I think that is what kgb-agent is looking for.
Blazeitup123 said:
Do you know the keys for the phone app? I bet there are 100 people wanting those. I think that is what kgb-agent is looking for.
Click to expand...
Click to collapse
I don't have a clue how to change softkeys within the phone app, sorry. Looks like I have misread the original post...
Thanks Heretic & others
Yep ... me & 1000 others want to change the key in the phone app
With CT's rom version 4 if I tap Phone soft key on Today screen then tap the little phone icon between the video call and menu softkeys it removes the keypad and leaves me with last call and contacts list...
No ideas anyone .... it is really bugging me
For me i just disabled the phone skin with the Advanced Config tool. It reverts back to the old WM6 design. I still prefer that. Do note that once u do this, the vibration when a call connects is disabled.
Hey KGB-Agent, I have exactly the same problem...and it is bugging me as well! I upgraded my dutch ROM yesterday :-( Another problem I have is that when I look at my contacts the SIM contacts are not displayed, even when I configure this in Advanced Config Tool...HELP! Anyone else an idea how to fix???
Your contacts are opened when your in the phone app, just scroll! why do you want it to open another contacts process when its already there?!? up and down or as i already said circle the middle button with your finger
Hi Blaze,
Circling with my finger in the middle button doesn't work for me. Furthermore, with "Contacts" I could quickly scroll down with the Alphabet on the right to f.e. the letter Z. The way you recommand it takes me ages to get to the "Z"!
I called the HTC helpdesk, they advised me to do a Hard Reset. Of course...that didn't work...:-(
Go to start and choose contacts its the same screen.
I agree the videocall is a bad choice from the makers of this rom.
Most people do not use this kind of calls.
Grtzzz
I have the same issues with the loss of functionality Ries
I cant believe there are not more complaints
I emailed HTC 4 days ago with no answer :<
@kgb-agent: I phoned the helpdesk. They said I had to do a hard-reset!?! I couldn't believe it, but okay, I tried it...and what do you think: I still have the problem! :-( I guess we have to live with it...bad choice from the developers...
same problem
up
Two things:
1) why don't people use the smart dialling feature? this is where when in the phone keypad, you just spell out your contact using the alphanumeric keypad (it uses T9 to search) and it displays your search results in real time at the top of the dial pad... MUCH easier than the contacts screen - try it.
2) circling the middle button with your finger does NOT work for me, i have no idea how that is working for you since the diamond is not meant to be able to scroll using that 'wheel' unless you have installed some 3rd party software for it, or its unique to your ROM/region.
This tweak doesn't have anything to do with the registry or anything remotely technical so don't worry about applying it it will take less time to do than to read this post!
If you think you Diamond's ringing time before it goes to voicemail is too short then you can do this to lengthen it.
It don't know if this works on all networks at least I know it works on Orange UK.
Go to phone type the following.
**61*07973100123*11*30#
Press call...wait for a confirmation....done!
I'll explain a little more, this should work on all networks and is not a "Diamond" specific tweak, it just tells the network's system to let your phone to ring longer for the person calling you before it goes to voicemail, or the "This person cannot take your call message".
The important thing is the middle part.
After the **61* part is the number for your network provider's voicemail service, in my case on Orange UK it's 07973100123, please check with your network provider what this may be, they may call the number the "access you voicemail from abroad or any other phone" number.
The *11*30# part tells the system how many seconds to ring for, this can be anything between 10 and 30 seconds in 5 second increments. - 10, 15, 20 and so on...
Please let me know if this works on other UK providers, and re-post with your findings, i.e. what the voicemail access number is for each one.
How to check if it worked? Phone yourself and see how long it rings for!
Happy Days!
.G.
Edit 23:51 12/08/2008:- It won't work with the short code for the voicemail.
i.e. the 123, 901, 171 numbers - it had to be the full version. Again from an Orange handset the voicemail number is *Hotkey 1 or 123, To listen to
voice mail from another phone is 07973100123.
Heh, Sweden Tele2/Comviq it's **61*46252(voicemail number (in my case 222))**30#
Just tried it but using 901 (for o2) instead of the Orange voicemail number.
Haven't tested it but it did say 'Succeeded' in a notification bubble so it must've done something right.
Sherby said:
Just tried it but using 901 (for o2) instead of the Orange voicemail number.
Haven't tested it but it did say 'Succeeded' in a notification bubble so it must've done something right.
Click to expand...
Click to collapse
Phone yourself and see!
Jersey
Doesn't work on Jersey Telecom 171
Wow thats an old one I remember that from about 10 year ago when some nokias had the menu option to divert for 10,20 or 30 seconds in a menu...
Or you could just change it in the phone
Go Start->Settings->Phone->Services and ( don't know what's it called in english ) menu option ... then press 'get settings'.
Chose 5,10,15,20,25 or 30 seconds...
NisseDILLIGAF said:
Or you could just change it in the phone
Go Start->Settings->Phone->Services and ( don't know what's it called in english ) menu option ... then press 'get settings'.
Chose 5,10,15,20,25 or 30 seconds...
Click to expand...
Click to collapse
Didn't even that was there!
.G.
NisseDILLIGAF said:
Or you could just change it in the phone
Go Start->Settings->Phone->Services and ( don't know what's it called in english ) menu option ... then press 'get settings'.
Chose 5,10,15,20,25 or 30 seconds...
Click to expand...
Click to collapse
Done...changed from 20 to 30. It's the Call Forwarding option.
NisseDILLIGAF said:
Or you could just change it in the phone
Go Start->Settings->Phone->Services and ( don't know what's it called in english ) menu option ... then press 'get settings'.
Chose 5,10,15,20,25 or 30 seconds...
Click to expand...
Click to collapse
Thanks, have been looking for that, but gave up and checked my providers site
NisseDILLIGAF said:
Or you could just change it in the phone
Go Start->Settings->Phone->Services and ( don't know what's it called in english ) menu option ... then press 'get settings'.
Chose 5,10,15,20,25 or 30 seconds...
Click to expand...
Click to collapse
I know this function too
But is it possible to aplly this setting with a registry key?
THX!
ZeuBug said:
I know this function too
But is it possible to aplly this setting with a registry key?
THX!
Click to expand...
Click to collapse
Sure my Friend:
HKEY_CURRENT_USER/ControlPanel/PhoneCallFwd/DelaySeconds
It's a Dword Value, so put your value! (20 for 20 seconds,25 for 25...)
Guess by the age of this thread it may have been solved elsewhere, but having recently come across this problem and tried the **61* and settings\phone\service\-no settings- and the reg hack would like to solve this as well.
Not sure why I don't have no 'service, listed under settings\phone\service?
I have an htc diamond with a t-mobile sim if it helps?
Brilliant ! Worked a treat (**61*XXXXX ...) Thanks a mil !
great info
NisseDILLIGAF said:
Or you could just change it in the phone
Go Start->Settings->Phone->Services and ( don't know what's it called in english ) menu option ... then press 'get settings'.
Chose 5,10,15,20,25 or 30 seconds...
Click to expand...
Click to collapse
this has now sorted it so i have abit more time to get to the phone 10/10
am I doomed ?
None of the above methods worked.
Tried
- calling **61*+33610061766*11*30# (for french SFR) : msgbox says "Opération réussie" apparently, OK
- Nisse's method (Start->Settings->Phone->Services) keeps displaying 20s after I change it to 30s, close the settings and try again
- ZeuBug's : Registry key HKEY_CURRENT_USER/ControlPanel/PhoneCallFwd/DelaySeconds surprisingly displays "30" as value
- have soft reset the phone a couple of times,
but, whatever I do
- the settings always display "20 s"
- the call rings no more than 3 times,which is never enough to pull it out of tight jeans pocket! (no, solution is not to use a handbag, thanx)
Any idea if an other setting somewhere might be blocking or overriding this one?
____________________
16/09/2009 : After controlling with HTC tech support + operator (french SFR) tech support, the problem lies with the operator: SFR does not allow changing this setting!!!!!
Apparently, french Orange users can't either? (to be confirmed by Orange users)
just for those with same problem, initial ring delay can be turned down with :
http://forum.xda-developers.com/showthread.php?p=894882#post894882
The wm5_ringdelay_patch_normal-v1.2.zip contains a cab which does turn down the inital delay so I now get 4 rings instead of 3 before transfer to voicemail.
Great thanx to Tuatara
Hi All.
I have a bug with DialPad.It is inexact.
Many times when i press some number i got anothe one.
For example when i press "3" i got "6",when i press "0" i got "#".
The interesting point that is with ROM udk-beta/4,5,6 everething is sweet.
But with all other ROM's from XDA the bug comes back.
Allready did alignment,tried WM standart dialer and Iconsoft Phone..... without luck.
Please someone help,otherwise I'll slink myDiamond (but realy love this beast) ...
.
is the problum only with the dialer or with othe apps as well?
I don't have many apps to check it ,but when i play Video Pocker i have the same issue: When pressing on some card to hold - another card(from right side) is holded.
Varvar_s said:
I don't have many apps to check it ,but when i play Video Pocker i have the same issue: When pressing on some card to hold - another card(from right side) is holded.
Click to expand...
Click to collapse
well then the prob is not with the dialpad its your ph... just to be on the safe side do another alignment screen.... make sure you ame for the center of the + sign with alot of accuracy!! this might help!
if not then i think you need to get it fixed
azharsunny said:
well then the prob is not with the dialpad its your ph... just to be on the safe side do another alignment screen.... make sure you ame for the center of the + sign with alot of accuracy!! this might help!
if not then i think you need to get it fixed
Click to expand...
Click to collapse
The question is why with 3 roms from udk everything is ok ???
--- If you have a SGSII probably u have this options already custom on the ROM, this si for GB 2.3-2.7
Hey, anyone interested on a Tasker app to look like iphone/SGSII+ reject call system? I'm making one in tasker really simple but usefull. But it's on portuguese.
If theres any1 interested I can try to translate to english..
https://dl.dropbox.com/u/18267742/Samsung Galaxy Ace/SC20121011-234423.png
Normal acept/reject button.
https://dl.dropbox.com/u/18267742/Samsung Galaxy Ace/SC20121011-234443.png
If you long press reject button u get extra menus and a extra button.
https://dl.dropbox.com/u/18267742/Samsung Galaxy Ace/SC20121011-234450.png
Write the time to remind u to call that X person. Also sends a SMS saying in how many time u gonna call.
https://dl.dropbox.com/u/18267742/Samsung Galaxy Ace/SC20121011-234504.png
Likewise.
https://dl.dropbox.com/u/18267742/Samsung Galaxy Ace/SC20121011-234540.png
The sms sent.
https://dl.dropbox.com/u/18267742/Samsung Galaxy Ace/SC20121011-235624.png
The reminder. U can click it to auto call that person.
It also reject incoming call+ send auto sms saying ur busy if u face down ur phone (flip)
The screens are from version 1.0. At the moment on version 1.2 theres some interface cleanup/faster process and it uses a slider for the time, and not insert the number. It also converts to hours if u pass the 60minutes and sends SMS accourdingly.
The interface is kinda ugly, but its what I could get, im no PS pro, so if u wanna help..
I've also released in portuguese 3 versions, one with everything, the reject call system+flip, one with only reject call and one only with flip.
https://dl.dropbox.com/u/18267742/Samsung Galaxy Ace/SGS2Call v1.2.apk
Full App
https://dl.dropbox.com/u/18267742/Samsung Galaxy Ace/SGS2Call-semflip v1.2.apk
Without flip to reject call.
https://dl.dropbox.com/u/18267742/Samsung Galaxy Ace/SGS2Call-só flip v1.2.apk
Only flip to reject call.
Its in portuguese, but U can still test it out. (calling for urself works aswell). as I said, if you guys like it and wanna use it, I can translate to english today at night.
I think it uses 3-4mb background service RAM. You can stop it on Settings->Aplications-> Running Services.
Also on the call, if you want the defaul buttons u can just press the back key.
Also, when u getting the call, it may take 1-2 seconds to appear the buttons, so it can recognize the app(typical android behavior).
Feedbacks please!
http://forum.xda-developers.com/showthread.php?t=1935628
Official thread
Sent from my SGA using Tapatalk 2