Hi All.
I have a bug with DialPad.It is inexact.
Many times when i press some number i got anothe one.
For example when i press "3" i got "6",when i press "0" i got "#".
The interesting point that is with ROM udk-beta/4,5,6 everething is sweet.
But with all other ROM's from XDA the bug comes back.
Allready did alignment,tried WM standart dialer and Iconsoft Phone..... without luck.
Please someone help,otherwise I'll slink myDiamond (but realy love this beast) ...
.
is the problum only with the dialer or with othe apps as well?
I don't have many apps to check it ,but when i play Video Pocker i have the same issue: When pressing on some card to hold - another card(from right side) is holded.
Varvar_s said:
I don't have many apps to check it ,but when i play Video Pocker i have the same issue: When pressing on some card to hold - another card(from right side) is holded.
Click to expand...
Click to collapse
well then the prob is not with the dialpad its your ph... just to be on the safe side do another alignment screen.... make sure you ame for the center of the + sign with alot of accuracy!! this might help!
if not then i think you need to get it fixed
azharsunny said:
well then the prob is not with the dialpad its your ph... just to be on the safe side do another alignment screen.... make sure you ame for the center of the + sign with alot of accuracy!! this might help!
if not then i think you need to get it fixed
Click to expand...
Click to collapse
The question is why with 3 roms from udk everything is ok ???
Related
I often dial using the default touch screen keypad on my Tilt but it's really bad; it lags heavily between presses and if I go too quickly it iwll lose the intermettent presses. Any known solution?
...try without the skin ?
sebbes said:
...try without the skin ?
Click to expand...
Click to collapse
Which skin? I'm using what it came with.
Same problem here to. I saw the same problem with the hermes. Very anoing when u use a phone service that u have to enter serveral digits(code, bank accont etc)
Its probably not fixable
just disable the sound when clicking a button. This helps for me.
Yes that did it but you should not have to
Anyway thanx for the super info... Finaly i can type a number at a normal speed.
Thanx again
Bouloama said:
just disable the sound when clicking a button. This helps for me.
Click to expand...
Click to collapse
how do you do that? i checked all sounds and notifications
I have a full mute device , only cant find the sound settings for those buttons in the dialer , pretty annoing
thnx
start-settings-personal-phone-keypad
perfect , thnx
lag fixed for me
Sad sort of workaround but it works. Thanks.
Does this fix pressing buttons and it not responding? I use the beeps as confirmation that it actually responded...
Hey Guys
I just purchased and downloaded MS Voice Command 1.60 M2M and every time i try to install it I get the following error at the very end of the install:
"An unrecoverable error occurred in setup. Reset the device and try again."
It does seem to install it but nothing of MS VC works.
Having done a forum search I couldnt see any ideas so, i'm here asking for your help
Any ideas?
If I remember correctly, i'm running the Diamond TLR build ... :/
just tried SK-Tools to delete the old version and resinstall direct from the CAB file .... no luck.
Hi,
can you tell me your EXACTLY version of VC.
On some versions you'll need to change some files.
Hey mate
VoiceCommand_english_intl.exe
Microsoft Voice Command UK PPC 1.60 for M2M
Got it from Handago or something like that today
If I need new files, any idea where I might get them from?
Bit cheesed to be honest, I've bought this software, paid for it and it don't work.
OK,
to get the exact version (1.60.xxxx.x) go to Start -> Settings -> Voice Command. At the right side you see "v1.60.xxxx.x". The x's are the exact version.
VC 1.6 have problems to work since Windows Mobile 6.x. I've made a CAB for the "normal" Touch a few months ago. With this patch I get it also to work on my Diamond.
I use an extremly old version of VC (1.60.4622.0). Perhaps it also works on your version.
What you have to do:
- Intall your VC
- Ignore the error message
- DEactivate VC (Start -> Settings -> Voice Command -> uncheck "activated")
- Install my CAB (you have to copy it first to the Phone)
- Activate VC again
Here the link: http://forum.xda-developers.com/showpost.php?p=2031281&postcount=7
Let me know, if it works
funnysurf said:
OK,
...
I use an extremly old version of VC (1.60.4622.0). Perhaps it also works on your version.
...[/URL]
Let me know, if it works
Click to expand...
Click to collapse
Thats the version that was sold to me earlier.... why are these online shops selling such old versions????
Will try your cab now.... brb
Nope..... thanks for your cab but still nothing .... just hold down button 1/left upside down phone and "dink".
Thats it.
Ahhh,
OK. These "old" version don't assign a key of Diamond to VC. Try to assign it manually in Settings. I use it only with my BT-headset for that. So I didn't assign a hardware key to VC.
Tell me if it works. If it's so, I'll make a new CAB with key assignment to the left (phone up) key.
thats the thing mate. The ONLY key I have assignable in Buttons is key 1 which im assuming is the phone up/left key? As it is, i've assigned this to VC and I only get a "dink" when I hold it down.
edit: seriously .... no other buttons are listed in that screen just button 1
Monty Burns said:
thats the thing mate. The ONLY key I have assignable in Buttons is key 1 which im assuming is the phone up/left key? As it is, i've assigned this to VC and I only get a "dink" when I hold it down.
edit: seriously .... no other buttons are listed in that screen just button 1
Click to expand...
Click to collapse
The Diamond has ONLY this one assignable (for long press). The "dink" is OK. Did you try to say something like "help" in the phone? Did it answer your "help" with an explanation of how to use VC?
yeah, tried "help" ... nothing.
I know its not working as on my G900 and tytn before that, a little microphone icon would appear in the bar at the top - its not appearing here.
Hm,
i've tried it now also. There ist no icon... And also no reaction :-(
I never tried it with a hardware button since now. I'll try to get an answer for that. Why does it work (for me) over BT, but not on HW-key...
I'll make some tests, but not more today (tomorrow at 5 a.m. I must get up).
Tell you then my solution, if I get one ;-)
funnysurf said:
Hm,
i've tried it now also. There ist no icon... And also no reaction :-(
I never tried it with a hardware button since now. I'll try to get an answer for that. Why does it work (for me) over BT, but not on HW-key...
I'll make some tests, but not more today (tomorrow at 5 a.m. I must get up).
Tell you then my solution, if I get one ;-)
Click to expand...
Click to collapse
Stay up!!!!!
Nah, thats great mate Thank you very much for trying today - really appreciate it
Enjoy tomorrow and I look forward to any ideas you may have
Hi,
I didn't forget you. I came home about 20 minutes ago. And I'm not realy able to think at the moment...
Is it for you OK to get (if I find one) an answer tomorrow?
Sorry for that...
mate
you are not under contract, you are here on your own free will
You help when you like and i thank you for ANY help you can provide, even if its next year!
Hi
I have the exact same problem so im also listening intensely for a solution
Hey Deeds
a few wise people are looking in to this for us. So far, we've tried a custom cab to fix it and also downloading the latest frame work from MS. Sadly, neither have worked.
You can follow the updates, questions and ideas in this thread
great thanks monty!
edit:
ive been trying for a couple of days now, with the same errror message as you.
ive also tried the patch linked to in another thread but also with no succes
and i too get the same ''dink'' sound even though i have mapped the button to VC instead of the default setting.
but it seems that this is the right place for answers so i guess i will just have to be patient
what rom are you using? I currently have the Diamond TLR, are you on a standard HTC or cooked?
and yes, if anyone in the world can solve it, this is the place they will be ... fingers crossed!
using
Rom: 1.93.403.2 danish
not really sure what cooked means ?
Hi guys.
I'm new to the Windows Mobile world and only got my Xperia X1 a couple of weeks back. I want to get the TouchFLO 3D interface on there.
However, I want to use CABs which allow me to switch to the TF3D interface and back out again to Xperia, rather than using a cooked rom.
I've looked around and at first it seemed fairly simple, but then the installation wouldn't work because the file didn't have certification security (or something like that).
I've seen articles saying you have to install older versions first, and almost all seem to point to cooked roms.
Does anybody know of a way to install the TF3D interface from a CAB file, and be able to switch in and out of it, like you can do with Spb Mobile Shell 3.0.1?
I have Spb Mobile Shell 3.0.1 and Spb Weather installed, but I really want the TF3D interface... the weather animations on it are absolutely amazing!
Any help will be very much appreciated. Thanks for your time.
Regards
Sonny
If you check out the stickies in this section, one of them is all about programs, panels and tweaks.
http://forum.xda-developers.com/showthread.php?t=441439
Going through it, there is a specific one about installing TF3D as a cab and then running it as a panel.
Wow! Thanks Zenith.
Just managed to install Touch-IT_Blackstone_Manila.cab and then TF3DPanelInstaller.CAB.
Works a charm. Exactly what I was after.
I'm now going to install Touch-IT_Blackstone_Manila_HD_FULL.cab and see how the applications work.
Thanks again for guiding me in the right direction, very much appreciated.
Regards
Sonny
give him the real deal....go to rom section..
Issues With Right Selection Button
Not sure if this is a known and shared issue. Is anybody else having the following problem..?
After installing Touch-IT_Blackstone_Manila_HD_FULL.cab, my right-hand selection button (the one above the OK button) is not working correctly. E.g. on the Today screen, it does not take you to 'Contacts'.
The left-hand selection button is fine, and it does correctly take you to the 'Phone' screen.
The right hand button is functioning though, but it seems to just be working like the 'Hang-up' button. If I go into an app and press it, it takes me back to the Today screen, and the app remains open in the task manager.
I got a little worried and decided to revert back to the original setup of my phone by using Sony's update tool. The right-hand selection button began to work fine again. After re-installing Touch-IT_Blackstone_Manila_HD_FULL.cab, I've got the problem again.
I'm guessing this may be down to a registry change. Anybody have any idea if and how you could change this through the registry, and which regkey to amend? Or is there a tweak/fix for this issue?
Any help would be very much appreciated.
Regards
Sonny
Sorted Button Issue
Hmm, after checking the button settings again, it turns out the Right Selection button was set to Today. Removed the selection... sorted.
sonnysoul said:
Not sure if this is a known and shared issue. Is anybody else having the following problem..?
After installing Touch-IT_Blackstone_Manila_HD_FULL.cab, my right-hand selection button (the one above the OK button) is not working correctly. E.g. on the Today screen, it does not take you to 'Contacts'.
The left-hand selection button is fine, and it does correctly take you to the 'Phone' screen.
The right hand button is functioning though, but it seems to just be working like the 'Hang-up' button. If I go into an app and press it, it takes me back to the Today screen, and the app remains open in the task manager.
I got a little worried and decided to revert back to the original setup of my phone by using Sony's update tool. The right-hand selection button began to work fine again. After re-installing Touch-IT_Blackstone_Manila_HD_FULL.cab, I've got the problem again.
I'm guessing this may be down to a registry change. Anybody have any idea if and how you could change this through the registry, and which regkey to amend? Or is there a tweak/fix for this issue?
Any help would be very much appreciated.
Regards
Sonny
Click to expand...
Click to collapse
this is a known problem for tf3d. correct me if im wrong but all the cabs and cooked roms has this issue. sure you can assign the button in settings but after you turn phone off or reset tf3d it will always reset right button to today.
untick tf3d 1st then extract and paste in windows directory and your problem will be solved. hope that works for ya
himuraken said:
this is a known problem for tf3d. correct me if im wrong but all the cabs and cooked roms has this issue. sure you can assign the button in settings but after you turn phone off or reset tf3d it will always reset right button to today.
untick tf3d 1st then extract and paste in windows directory and your problem will be solved. hope that works for ya
Click to expand...
Click to collapse
So this is to enable the right button to be assigned? Hmm.... kind of remember having that problem but somehow it was solved. Think with B2 of Daran's cab.
ManilaToday.dll Fixed The Issue!
Thanks Himuraken!
The ManilaToday.dll fixed the issue. Replaced the one in my Windows directory and now I don't have to change the button settings after a reboot.
And just for the record, Ipporek, I have Daran's B3 CAB and I was still getting the issue before Himuraken provided me with this ManilaToday.dll.
Problem sorted, now to look at installing the essential software cabs for TF3D. Installed Youtube yesterday, seems to work okay. Will check out some of the others later.
Regards
Sonny
sonnysoul said:
Thanks Himuraken!
The ManilaToday.dll fixed the issue. Replaced the one in my Windows directory and now I don't have to change the button settings after a reboot.
And just for the record, Ipporek, I have Daran's B3 CAB and I was still getting the issue before Himuraken provided me with this ManilaToday.dll.
Problem sorted, now to look at installing the essential software cabs for TF3D. Installed Youtube yesterday, seems to work okay. Will check out some of the others later.
Regards
Sonny
Click to expand...
Click to collapse
glad it work for you. i forgot to mention that credit goes to the person that provided this in the touch itJe v7 thread. not sure who it was so please forgive me.
Hi, it is my first post in a long time. Now I'm Xperia user.
I tried to download the today.dll but the link is gone. Additionally, my manila is not working: for some unexplained reason the program keeps trying to enter but did not succeed. It starts and then restart without opening.
Can somebody help me? I'm not inclined to try a Rom with manila for in that case I lose the "Ç" key and the letter recognition.
I use the Brazilian Sony Rom version from April 23, 2009.
Thanks, in advance!
Manila not working on Brazilian Xperia
Hi, this is my first post in a very long time. I tried to install this on my Xperia but got 2 errors:
1 - the right hard key problem and the file Today.dll is no more available at the said link
2 - the manila tries to start but does not enter. It keeps restarting but to no avail!
Please, some help is in order! I use brazilian Sony Rom and a cooked Rom is not na option since I would loose the hard "Ç" key and the on screen letter recognizer.
Also, I could not put the "Transcriber" to work.
Thanks
KMur
Dear All Sifu .... I don't know when & why .. when yesterday I intended to set sound .. when I pull down .. "start" Manu .. suddenly I can't see the "setup" button ....
I really wonder why/when the "setup" button gone ... I suspect SKTool have remove it ...
Any sifu can help to retrieve back??? pls don't ask me hard reset ... my phone is Tytn II wm6.1 original ...
Don't be afraid of hard resetting...yeah it might take a few minutes to reinstall apps but at least you will have a fresh, fast phone Sorry I don't know why that might have gone away, maybe someone else might have an idea.
Use File Browser \Windows\Start Menu and create a folder named Settings and all will be solved
Thank for advice ... and just discovered ...
http://forum.xda-developers.com/archive/index.php/t-371115.html
and confirm it work .
But I still really wonder why window mobile will happen like that??? really so not stable???
Really dont know next time "programs" disappear can use this method or not ...
tsfatt said:
Thank for advice ... and just discovered ...
http://forum.xda-developers.com/archive/index.php/t-371115.html
and confirm it work .
But I still really wonder why window mobile will happen like that??? really so not stable???
Really dont know next time "programs" disappear can use this method or not ...
Click to expand...
Click to collapse
Wouln't work with removal of programs as they .lnk's in that location, settings is just a link to location, hope that makes sense.
Anyway glad you sorted.
Hi...
Just downloaded and installed Myn's Android for my HTC Touch... im having a hard time getting use to it...i guess it will come with time... but in the meantime... may be can someone tell me how to get to the dialer if i'm several levels deep in a screen, example, i'm currently downloading an app or viewing a map...and i'd like to call someone?
So far the only option is i have to back out using the camera button like 5-6 screens to get to my home screen and then click dialer... which to me is a bit unintuitive ... i've tried all combinations of buttons ( holding multiple secs too) and i couldnt find a way to get back to the home or even better dial out but clicking the send button ( which i'm used to in winmo)
Also, how do i access the running tasks? or do the tasks close eveytime i back out? I guess i need a how to use android 101..
QkSi1ver said:
Hi...
Just downloaded and installed Myn's Android for my HTC Touch... im having a hard time getting use to it...i guess it will come with time... but in the meantime... may be can someone tell me how to get to the dialer if i'm several levels deep in a screen, example, i'm currently downloading an app or viewing a map...and i'd like to call someone?
So far the only option is i have to back out using the camera button like 5-6 screens to get to my home screen and then click dialer... which to me is a bit unintuitive ... i've tried all combinations of buttons ( holding multiple secs too) and i couldnt find a way to get back to the home or even better dial out but clicking the send button ( which i'm used to in winmo)
Also, how do i access the running tasks? or do the tasks close eveytime i back out? I guess i need a how to use android 101..
Click to expand...
Click to collapse
The green key should work...if it's not you can hold in the camera button to go straight to home and click your dialer icon. For running tasks, you need to download a task manager like advanced task manager or taskkiller. Search for tatnai's FAQ to get started. I'm sure a lot of your questions will be answered there.
QkSi1ver said:
Hi...
Just downloaded and installed Myn's Android for my HTC Touch... im having a hard time getting use to it.....
Click to expand...
Click to collapse
Here is a great FAQ by Tatnai for the Buttons:
http://forum.xda-developers.com/showpost.php?p=5665206&postcount=51
Here is Tatnai's full FAQ which I use as a first resource for questions:
http://forum.xda-developers.com/showthread.php?t=628353
Enjoy!
hold camera button for a couple sec and it will back all the way out to the homescreen without having to hit it several times.
Both the camera and green button does not have the long press function... so it does not bring the Home screen... like i saw on some youtube android tutorial... I'll check the Tatnai's FAq to see .. .may be its just a settings on the Myn which is not activated by default.. i have the RLS version 4 of MYN... (not sure which Android version it is though....) sorry i'm learning as i post the questions and skim through the various threads
QkSi1ver said:
Both the camera and green button does not have the long press function... so it does not bring the Home screen... like i saw on some youtube android tutorial... I'll check the Tatnai's FAq to see .. .may be its just a settings on the Myn which is not activated by default.. i have the RLS version 4 of MYN... (not sure which Android version it is though....) sorry i'm learning as i post the questions and skim through the various threads
Click to expand...
Click to collapse
What date .nbh are you running?
slow88lx said:
What date .nbh are you running?
Click to expand...
Click to collapse
a reboot fixed my problem... thanks!