Hi All,
I am kindda newbie and have read almost all posts on how to superCID breeze, but haven't been able to do it so far.
I've heard that it is possible to use HTC_Hermes_SIM_CID_Unlock_v3 with Mteor. Can anyone tell me exactly what I have to modify in it so that it will not brick my device once I use it with my Breeze.
Thank you for your help,
Laurent
I recommend using http://www.imei-check.co.uk/ for your device. It only takes 3 minutes and cost no more then a bottle of wine.
After that your device is SuperCIDed and unlocked so every update process is very easy.
If you don't like to spend the money, you have to read a lot and you will get errors where you have to find a work around everytime you like to update or modify your device.
Does it mean that I will not have the very boring "INVALID VENDOR ID" error?
My phone is already unlocked and I can use any SIM card in it.
The problem I have is this annoying "INVALID VENDOR ID" that keep on coming whenever I try to upgrade my ROM. I've tried to rerun the same upgrade without disconnecting the cable and being in boot mode but it just keeps on coming.
Thank you for your help,
Laurent
laurentg said:
Does it mean that I will not have the very boring "INVALID VENDOR ID" error?
My phone is already unlocked and I can use any SIM card in it.
The problem I have is this annoying "INVALID VENDOR ID" that keep on coming whenever I try to upgrade my ROM. I've tried to rerun the same upgrade without disconnecting the cable and being in boot mode but it just keeps on coming.
Thank you for your help,
Laurent
Click to expand...
Click to collapse
You need to CID unlock your phone too ... make it superCID
there are already discussed ways of doing it, just do a liitle search.
bR
Related
Eager to be able to use the GPS in my phone I began upgrading it with the new dopod-ROM. I unlocked it with the sspl-trin.exe and started the process. After approx 58% of upgrading it halted, complaining about communication error. The upgrade program asked me to remove the battery for 3 seconds. I did so and the screen returned to the red,green,blue-thing. The upgradeprogram now complains about the CID, since the sspl-trin.exe is not running, and it won't install the new ROM. Niether do I find a way to get back to my old ROM. I guess I need to install the old one again...
Where can I find an old ROM?
Can I fix the phone without reinstalling?
I'm stuck with the RGB-screen and can't do anything at all with my precious piece of plastic, so please help!
/ Pete
Magician -> Tornado -> Trinity
pter said:
Eager to be able to use the GPS in my phone I began upgrading it with the new dopod-ROM. I unlocked it with the sspl-trin.exe and started the process. After approx 58% of upgrading it halted, complaining about communication error. The upgrade program asked me to remove the battery for 3 seconds. I did so and the screen returned to the red,green,blue-thing. The upgradeprogram now complains about the CID, since the sspl-trin.exe is not running, and it won't install the new ROM. Niether do I find a way to get back to my old ROM. I guess I need to install the old one again...
Where can I find an old ROM?
Can I fix the phone without reinstalling?
I'm stuck with the RGB-screen and can't do anything at all with my precious piece of plastic, so please help!
/ Pete
Magician -> Tornado -> Trinity
Click to expand...
Click to collapse
Check FTP for HTC shipping ROMs if your device was non-branded.
If upgrade soft complains about wrong CID for HTC ROM, try to run the upgrade program with a Dopod shipping version (so that it matches CID you currently have)?.
As a last resort you can try to perform the upgrade from miniSD card, refer to instructions elsewhere on this forum.
Technically as long as IPL and SPL are ok (which seems to be the case since you get to bootloader screen), it should be possible to flash one ROM or another one.
Good luck!
Ok, some additional information.
I've tried the english HTC ROM available on the xda-ftp but it complains about the vendor ID. Mtty.exe says that my ID is 'HTC__G09' and G09 probably refers to a swedish company in some way.
I threw away 20£ on an unlock that couldn't be run without active sync. This could be read in the instructions, but I kind of gave it a shot, beeing a poor student and all. :/ Oh God I'm stupid....
Now some additional questions...
Is it possible to get a working ROM from a similar device with the same vendor?
Is it possible that there is a file ready to send to me somewhere in the galaxy? Who should I ask to prevent myself from getting the "send it to us"-answer?
Try to update the ROM with matching CID of yr handset.Check Wiki reg this.After update if it stucks on the same screen then type "set 14 0" (without commas) in mtty utility.
Ok... Tried the miniSD-way but it didn't work. ("not allow" was the answer from my display) My CID differs from all in the list so it's really no surprise. The CID seems to be the key here.
My Dopod D810 (trinity) goes logo screen and stops running after an upgrade failure. I can run bootloader 1.07.0000 I also hope someone can upload an original ROM for my salvage.
hdubli said:
Try to update the ROM with matching CID of yr handset.Check Wiki reg this.After update if it stucks on the same screen then type "set 14 0" (without commas) in mtty utility.
Click to expand...
Click to collapse
pter said:
Ok... Tried the miniSD-way but it didn't work. ("not allow" was the answer from my display) My CID differs from all in the list so it's really no surprise. The CID seems to be the key here.
Click to expand...
Click to collapse
You may want to check out this thread:
http://forum.xda-developers.com/showthread.php?t=294046
If you create a .nbh with the CID as you device shows it, it might accept a cooked ROM with matching CID. If IPL/SPL gets damaged, though, it will get worse.
hi
this is my fisrt post in here.
i am a lerner in this field, so i might need to be directed steb by step.
i am trying to upgrade the ROM of my xda mini s O2, with the original new version of rom, and it should be quite easy to do, but everytime i triy i keep getting this #ç@!^=ç@@àà error 260.
as the manual says i tryed to restart and try again with the upgrading, but it doesen't work.
any suggestion?
thanx
fabraizio
fabraizio said:
hi
this is my fisrt post in here.
i am a lerner in this field, so i might need to be directed steb by step.
i am trying to upgrade the ROM of my xda mini s O2, with the original new version of rom, and it should be quite easy to do, but everytime i triy i keep getting this #ç@!^=ç@@àà error 260.
as the manual says i tryed to restart and try again with the upgrading, but it doesen't work.
any suggestion?
thanx
fabraizio
Click to expand...
Click to collapse
When you reboot your phone, what does it show for IPL and SPL currently? Have you rebooted your PC to see if that clears the problem? Try pulling out your SD card if you have one in the phone. Have you tried to do this from a different PC? You may want to find a copy of the wizard love rom and flash that to see if it does the same thing...
me to
so none of those things worked. i havent tried the other comp thing but what do we do now?
I was trying to flash my trinity but i am having problems,
I can get the phone into the bootloader mode without any problems
and the software see the phone ok but the update only gets 1% before it fails with "error 270 image is corrupt" i have tried many different image but the same occurs with them all.
My phone now only goes to the splash screen
is there any think i can do?
take a look at this thread, it may help you unbrick your Trinity...
thanks but no , my phone is not stuck in the bootloader just will not flash
Go HERE they might have a solution there!
Please don't double post! It will not give you a solution twice as fast
Hi. I had the same issue and solved it. feel free to send a MP if you still need help
Thanks still can not get working.. sent a pm to tonio94 thanks mate
Error 270
Hi m8,
Your error 270 is because your phone is still locked and the ROM(s) you are trying to flash are not natively signed for use on your particular phone!
You can either...
1. Pay to get your phone unlocked
2. Set your phone with Hard-SPL (see the related sticky on this very Forum)
3. Extract the .nbh file from the ROM you are trying to flash and flash it using the SoftSPL (SSPL) - again see the sticky on this very Forum.
Not being funny, but you really must do a bit of background reading before you start messing with these new ROM's on your phone.
I hope this helps - PM me if you need more detail.
Moz.
Same problem
Hello,
I've followed the thread to unlock cid/sim my 3600, but I can't upgrade nothing. I can't upgrade hardspl to.
With all roms, the phone stay on tricolor screen after "Yes" to allow enterbootloader.exe, and the rom tell me that the device is not connected.
Active sync was ok, the phone battery to.
Help?
I've 1.23.406 rom actually, and spl 1.07 ds.
EDIT: I've the soluce. I use the SSPL-TRIN for each upgrade, before the hard spl, before passing in 1.41, et now before the ROM, and it runs!!
I had not understood the thread about sspl-trin to bypass, so I didn't use properly.
Now it's ok...
Hello everyone. I have a Cingular 8125. I would like to know why when i try to cid unlock my phone, enablerapi does not do anything (restart my phone), and the lokiwiz.bat can not see my phone, even though everything else. Does it mean that my phone is already CID unlocked? Also, when i try to do it without the cid unlocker, my activesync connection shuts off after 30 seconds, and my phone needs to be reflashed. I baught the phone used off of ebay. It came with the original cingular ROM. I am trying to get WM6 on it.
Well TIA,
Whatismyphonecalled?
anybody? please, i really need help. would it help if i used lokiwiz 0.3 instead of the older .2?
whatismyphonecalled? said:
anybody? please, i really need help. would it help if i used lokiwiz 0.3 instead of the older .2?
Click to expand...
Click to collapse
DOUBLE POST ?
You don't have to double post in every subforum and start a new thread to get your answer,wait for someone to help you out.This Forum is full of info relating to your problem,you just have to search and read,instead of posting and looking for shortcuts,don't be a lame.
Check your other thread .
i love to see newbie bricks !!
Before playing with CID unlocking procedure, do you know what are you doing?? Why do you want to unlock your CID?? Do you have G3 or G4 device?? Is the ROM safe for your device generation??
People... read. Otherwise you will brick your device.
I was involved in a small issue where lokiwiz wouldn't see my device, and it turned out to be a firewall. I was using my corporate laptop and they have some stupid crappy sygate firewall on there and I am unable to disable it or turn it off (even though I have "Administrative" rights). When I took it home to my home PC that was basically a sparkling clean install of Windows XP x64, everything worked as the directions said that it would.
Jason
Please help with flash problem
whatismyphonecalled? said:
Hello everyone. I have a Cingular 8125. I would like to know why when i try to cid unlock my phone, enablerapi does not do anything (restart my phone), and the lokiwiz.bat can not see my phone, even though everything else. Does it mean that my phone is already CID unlocked? Also, when i try to do it without the cid unlocker, my activesync connection shuts off after 30 seconds, and my phone needs to be reflashed. I baught the phone used off of ebay. It came with the original cingular ROM. I am trying to get WM6 on it.
I have the same problem. I bought a T-Mobile MDA from ebay and it has the 2.26 OS. I've been trying to install the new wm6 on the phone, but right before the update process starts, the active sync disconnects and the screen displays the colors. I've been tring this for months but been failing. I honestly need some help so if there is anyone out there who knows the solution to my problem, please help me.
Click to expand...
Click to collapse
benjaminb007 said:
whatismyphonecalled? said:
Hello everyone. I have a Cingular 8125. I would like to know why when i try to cid unlock my phone, enablerapi does not do anything (restart my phone), and the lokiwiz.bat can not see my phone, even though everything else. Does it mean that my phone is already CID unlocked? Also, when i try to do it without the cid unlocker, my activesync connection shuts off after 30 seconds, and my phone needs to be reflashed. I baught the phone used off of ebay. It came with the original cingular ROM. I am trying to get WM6 on it.
I have the same problem. I bought a T-Mobile MDA from ebay and it has the 2.26 OS. I've been trying to install the new wm6 on the phone, but right before the update process starts, the active sync disconnects and the screen displays the colors. I've been tring this for months but been failing. I honestly need some help so if there is anyone out there who knows the solution to my problem, please help me.
Click to expand...
Click to collapse
Your phone is not CID unlocked,to verify if it's CID locked or unlocked,download the WST tool and run the 'CID Action' button to verify.
Cheers
Click to expand...
Click to collapse
i was trying to unlocker the phone but for some reason active sync crashed and it didn't finish. then i attempt to recover and unlock again but active sync doesn't detect 262.
how do i get out of bootloader since it's stuck and hardreset won't get me out of it. nor does reseting nor powering off.
twe90kid said:
i was trying to unlocker the phone but for some reason active sync crashed and it didn't finish. then i attempt to recover and unlock again but active sync doesn't detect 262.
how do i get out of bootloader since it's stuck and hardreset won't get me out of it. nor does reseting nor powering off.
Click to expand...
Click to collapse
As far as I know, if you trash the ROM the device is screwed.
no fix? that means i need to go throughu insurance?
hmmm, sounds like your phone might be bricked! how about if you sale it to me half the price you got it for, then I'll take it and throw hardspl on it right before flashing a stock rom ;0)
Now it's in bootloader mode you can load a new ROM.... When you plug the cable in the PC does it say 'USB' on the bootloader screen? If so then you can use RUU to flash a new ROM. But from what you're saying you get an error when you try and do that? Hmm.
This is why I keep DIAMIMG.nbh on the 4GB just in case things like this happen then you can restore from that.
Maybe take it to a mobile phone repairer and see if they can force flash an image. I've had that done with many Nokia's but I don't know it that's possible with a WinMo device..
If you've already HardSPL'd your device then you have voided the warranty. I guess as you said insurance may be your best bet. Good luck
salada2k said:
Now it's in bootloader mode you can load a new ROM.... When you plug the cable in the PC does it say 'USB' on the bootloader screen? If so then you can use RUU to flash a new ROM. But from what you're saying you get an error when you try and do that? Hmm.
This is why I keep DIAMIMG.nbh on the 4GB just in case things like this happen then you can restore from that.
Maybe take it to a mobile phone repairer and see if they can force flash an image. I've had that done with many Nokia's but I don't know it that's possible with a WinMo device..
If you've already HardSPL'd your device then you have voided the warranty. I guess as you said insurance may be your best bet. Good luck
Click to expand...
Click to collapse
yes it does show usb in the bootloader. but te computer wont detect the device since acticesync doesnt recognize it. also the unlock never succeeded so its still locked but stuck in boot screen
twe90kid said:
yes it does show usb in the bootloader. but te computer wont detect the device since acticesync doesnt recognize it. also the unlock never succeeded so its still locked but stuck in boot screen
Click to expand...
Click to collapse
You don't need activesync to flash a ROM when the device is in bootloader. The RUU should detect that the device is attached.
TomInMB said:
You don't need activesync to flash a ROM when the device is in bootloader. The RUU should detect that the device is attached.
Click to expand...
Click to collapse
but it doesnt show in the rru the previous rom loaded. the rru dosnt seem to correctly read the phone
twe90kid said:
but it doesnt show in the rru the previous rom loaded. the rru dosnt seem to correctly read the phone
Click to expand...
Click to collapse
Does the RUU give an error?
TomInMB said:
Does the RUU give an error?
Click to expand...
Click to collapse
i think so. what happens if it does? im out right now and ill try asap when i get back home
You would get a specific error code. Go ahead and try it...I feel confident it will work.
wat would happen if i get a error?
twe90kid said:
wat would happen if i get a error?
Click to expand...
Click to collapse
The RUU would stop (most likely before flashing started) and it would report a specific 3-digit error code.
i hope i dont get error 262 like i did when trying to unlock.
will report back later when i get home
Take a look here also. If error 262 is from RUU, that is recoverable.
http://forum.xda-developers.com/showpost.php?p=1177210&postcount=5
yup got error 262 but i tried this and it didn't work
-> ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
the bootloader shows this
it brings me here
security unlock
DIAM500
SPL-0.57.0000
MicroP-Diam (LES) vB
PSQC Diam STAGE_EVT V20
it says this in the middle of the screen
upgrade rom code error
please try again
but when i try again i get error 262. active sync doesn't detect the device either
anyone got any idea? thanks
bump.... i keep getting errror 262 on flash
Are you trying to flash a ROM or SPL??? You should be flashing the unsigned-HardSPL before trying to flash a ROM.