WM6 SmartDial on WM5 ? - P3600 Software Upgrading

Hi everyone. Does anyone know whether it would be possibe to have the WM6 smart dialing on a WM5 rom. My hermes running LVSW WM6 defaults to using the WM6 smart dialing, however if you want to enable the video call options then it seems to use the WM5 dailing screen with the old smart dial.
I was thinking, if the WM5 dailing works with WM6, then maybe the default WM6 one would work in WM5 with a bit of fiddling.
The reason i want this is because when i call people i type the name with the smart dial jobby and there they all are. Problem is though that if you then scroll to the one you want and click the wheel it does not give you the option of what number you want to call them on, eg mobile or home. It just dials the last one you used for that person.
In WM6 when you scroll and select it then brings up the contact details so you can choose which no you want to dial.
Few, that took some explaining.
Thanks for your help guys and gals.
Rob

anyone got any ideas ?

just trying to revive this and see if anyone can help

i think it is impossible

Related

WM6 Voice Dial from Bluetooth Working!

After messing around with numerous reg tweaks etc to try and get my headset button to initiate Voice Dial I could not get it to work, in fact I recked my install of WM6 in the end. So yesterday I did a complete re install of WM6 (Orwell Edition) And set everything up the way I like it.
Then I installed the latest MS Voice Dial 1.6 and BOING it WORKS!!!
No reg hacks needed. This is the first time ever I have got my headset to work with MS Voice Dial
Now my life is complete! This was the last little annoyance I had with WM6.
I am happy to say this is with out a doubt the best rom I have ever used.
Jules
Whahahahaha OK i found one bug. And I laughed so hard I almost fell of my chair!
I press the headset button and say "What Calls Have I Missed?"
Wizard Replies "2 Million Six hundred Thousand and sixty eight missed calls!"
Wow but Im one popular guy huh
Jules
Edit
On the next missed call request all seem fine again "You have no missed calls" hmmm gues no one loves me afterall :-(
I have tried reinstalling the cab file and, although it works, it actually causes problems with the SIP! Following the re-installation of voice command, changing the SIP takes for ever! Does anybody have a better solution or a solution for the SIP delay after the CAB Installation? Thanks
I just checked and there is a delay, I only use Resco Keyboard as my SIP so this is not an issue for me. Hope someone finds a solution for you though
Jules
Here is something really wierd! :S Installing the cab solves the BT activation problem but causes the SIP change to be dead slow. I then proceeded and exported all registry entries. Hard reset the machine and import the registry entries previously exported and copied the VC files into C\program files. Soft reset and BT works and also SIP change is as fast as without VC! :S Can anyone explain this?
I would like somebody to cook wwe crossbow rom without Microsoft Voice Command because it's not licensed.
ZaJules said:
After messing around with numerous reg tweaks etc to try and get my headset button to initiate Voice Dial I could not get it to work, in fact I recked my install of WM6 in the end. So yesterday I did a complete re install of WM6 (Orwell Edition) And set everything up the way I like it.
Then I installed the latest MS Voice Dial 1.6 and BOING it WORKS!!!
No reg hacks needed. This is the first time ever I have got my headset to work with MS Voice Dial
Now my life is complete! This was the last little annoyance I had with WM6.
I am happy to say this is with out a doubt the best rom I have ever used.
Jules
Click to expand...
Click to collapse
Hi guys,
fink ive missed something here. voice commands using bt with msvc and wm6 were not working as i know. did u install any fix?

Call and SMS counter for Diamond

Hey Guys,
I need a SMS and Call time counter that should reset on a certain day in the month. When I was using the Artemis, I always used Batterystatus of Chi-Tai.
Installing of this software is not possible on Diamond since it has an another processor.
Does any of you guys know what software I can use to see my monthly calls?
Kind Regards,
SuperTeke from Amsterdam
I'm using BatteyStatus of Chi_Tai on SecondToday with my Diamond, It's working fine...
I havent tryed the sms/call thing, but I think It's working..
Just do a search of SecondToday...
Hmmm... first of al thanks for your reaction....but Batterystatus doesn´t work on my device....What version do you use?
Secondtoday is for other purposes as far as I can find information about.
I don´t need an alternative for Todayscreen but an alternative way to count my outgoing calls and sms.
maybe lcminutes http://lctools.blogspot.com/

Microsoft Voice Command V1.6.19971

I noticed that in the Diamond forum Dutty has embedded MSVC 1.6.19971 into his ROM.
Any ideas where I can find the installation CAB for this?
alanplum said:
I noticed that in the Diamond forum Dutty has embedded MSVC 1.6.19971 into his ROM.
Any ideas where I can find the installation CAB for this?
Click to expand...
Click to collapse
I'm using MSVC_US_PPC_1.6.19214 which is working fine. You can find this in one of the threads in Kaiser but I believe it was taken down for an unknown reason (the thread still exists but the first 5 message and topic title was deleted). The title was something like "The Definitive Guide to MSVC". You can still get it in google cache though
pfcsabre said:
I'm using MSVC_US_PPC_1.6.19214 which is working fine. You can find this in one of the threads in Kaiser but I believe it was taken down for an unknown reason (the thread still exists but the first 5 message and topic title was deleted). The title was something like "The Definitive Guide to MSVC". You can still get it in google cache though
Click to expand...
Click to collapse
We removed the MSVC cab because it is a retail sold program, YES it was put into some official ROMs but after a LONG debate we decided to not allow it in cooked ROMs etc... just such a grey area we didnt want M$ finding another reason to have a go at xda-devs.
i had a feeling it will be taken out eventually, curiously though i was thinking why the guy was banned
MS Voice Command 1.6 German
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!
mr.right67 said:
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!
Click to expand...
Click to collapse
Have you read post #3? MSVC is a retail sold program, if you want it please buy it.
Hey guys, on my fuze with the at&t rom, MSVC was included, now that i've upgraded to romeos rom and it's not included on his rom! i know that you guys are saying its a pay program, but i paid for it when i bought the fuze (as its included in the price).... and i really dont wanna pay for it again...
Does MSVC integrate and work with the fuze over bluetooth? I know that it needed several mods to work with both the 8525 and the Tilt.
Thanks
it worked perfectly with the at&t rom without any mods at all. and actually after i posted, i realized that i still had the copy that i had download from this site for my tilt. i installed it and it works perfectly once again
omaralt said:
it worked perfectly with the at&t rom without any mods at all. and actually after i posted, i realized that i still had the copy that i had download from this site for my tilt. i installed it and it works perfectly once again
Click to expand...
Click to collapse
Does it announce incoming calls over the bluetooth headset? I can't get it to do that. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Any ideas?
jglev said:
Does it announce incoming calls over the bluetooth headset? I can't get it to do that. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Any ideas?
Click to expand...
Click to collapse
I'm sure this is a dumb question but did you double-check the settings? (Start -> Settings -> Personal -> Voice Command -> [Highlight Phone] -> Options -> Announce Incoming calls) and (Start -> Settings -> Personal -> Voice Command -> Notifications Button)
ITNV said:
I'm sure this is a dumb question but did you double-check the settings? (Start -> Settings -> Personal -> Voice Command -> [Highlight Phone] -> Options -> Announce Incoming calls) and (Start -> Settings -> Personal -> Voice Command -> Notifications Button)
Click to expand...
Click to collapse
Yes. I wish it were that easy. As I said, all parameters are set up exactly like my Tilt which worked perfectly. With the Fuze, I only get my ringtone. Now, I know that the Fuze has a newer version of VC, so I may try to downgrade to the version that is on my Tilt.
omaralt said:
Hey guys, on my fuze with the at&t rom, MSVC was included, now that i've upgraded to romeos rom and it's not included on his rom! i know that you guys are saying its a pay program, but i paid for it when i bought the fuze (as its included in the price).... and i really dont wanna pay for it again...
Click to expand...
Click to collapse
I'm wondering the same thing. Stock Fuze had MSVC, and I flashed to the Elite ROM, and would like MSVC back. Is there any way to flash my Fuze back to stock rom, and pull the cab file out of it??
Unless you can tell me otherwise, the one that comes with the FUZE is defective. Partly... A few of us can't get it to say the incoming caller name or number. All you hear is a bell sound. I've gotten everything else to work like dialing from the headset, even where it says I have an appointment on my BT headset. Just for the announcement of whos calling doesnt work.
Do you have to have the handsset connect to juse VOice C`?
I pulled VC 1.6.19971 out of the AT&T Fuze ROM and included it in my personal ROM and I was able to enable "Announce incoming calls".
On my Nokia BH-501 headset, it begins to announce the call, but gets cut off by the built in headset ringtone. (I only use this stereo headset for music)
On my Oakley Razrwire it works just fine. With 'announce' turned off, the headset uses it's normal built-in ringtone. With 'announce' turned on, I get the VM announcement with my WM ringtone playing in the background (it opens an audio stream from the phone). I use this headset while driving, so it's all good.
Well well... depends on your MSVC-version. 1.6.4622 DOES NOT announce any incoming call regardless of the setting.
1.6.17913 does, 19209, 19213, 19214 does...
By the way: the ultimate FAQ was named The Definitive Guide for Microsoft Voice Command - I posted a backup in another thread.
anyhow, does anyone know the advantages of 1.6.19971 ? Does it report anonymous callers correctly (which none of the above does?)
And why is it that anyone wants to use newer versions without even knowing changes? Maybe it's a beta version, maybe it's buggy... but it's a newer release... using legal german retail (bought it) .4622 with 19209 exe for announcing reasons. Works brilliant on raphael.
But maybe someone knows a list of changes or fixes, advantages or disadvantages in 19971?
I would really like cyberon voice dial 1.2 to work on the fuze but when i press the bluetooth headset it does not work, i have searched but can't find what the reg edits need to be. thanks for any help one can provide me
irus said:
I would really like cyberon voice dial 1.2 to work on the fuze but when i press the bluetooth headset it does not work, i have searched but can't find what the reg edits need to be. thanks for any help one can provide me
Click to expand...
Click to collapse
Before or after installing cyberon? - After: Unpairing headset, repair and watch out having it set as default handsfree headset
HTH
MSVC in Dutch?
Hello all:
Is MSVC available in the Dutch language? Its kind of weird hearing my Dutch contacts' names pronounced in English. Funny, but still weird...

Raphael Caller ID for Kaiser

Hi,
i´m looking for this Caller Id from Raphael, or advice how can i disable opal caller Id "with sliders" from hyperdragon III blackstone
killerGBU said:
Hi,
i´m looking for this Caller Id from Raphael, or advice how can i disable opal caller Id "with sliders" from hyperdragon III blackstone
Click to expand...
Click to collapse
I think this might give you what you want. Not sure if it will intall over that you have now. I used it once , but I prefer the slide to answer. It keep me from accently hitting the hang up button when holding the phone to my face or answer while phone is in it's case, or me grabbing it, before I can see who's calling.
Try this, hope it's what you're after:
thx,
i helped, bud i dont see color and mute button. It doesnt matter, i´m glad that hw keys is now working.
Sorry, I don't remember the exact detail of the dailer.
Keep an eye on it. On my ROM this (maybe, don't recall specificaly) and the opal dailer start out working but soon after break.
Hope you find what you looking for.
I've tried installing this cab on my HTC 6.1 ROM, but it only changes the startup pin screen and nothing else. Any other versions that will work on a standard ROM to get the call id screen like above?

Vibrate to Connect in 6.5

is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
TheDempster said:
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
Click to expand...
Click to collapse
That tab doesn't exist in WM6.5 with the default dialer.
The only way I know of is to use s2u2 and set it to answer calls and it has an option to vibrate on connect, but I honestly don't use it because I like the built-in lock app in 6.5.
GustavTheLion said:
is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Click to expand...
Click to collapse
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
AdamNimrod said:
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
Click to expand...
Click to collapse
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
neight said:
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
Click to expand...
Click to collapse
Uh, thats that ROM Im already an using.
that option is there because i used Da_G's kitchen and installed the htc dialer because i thought i would like it, however the 6.5 dialer i like better so i used advanced config to switch back.
and yes i like the 6.5 lock much better as well so s2u2 is not an option.
also i downloaded some kind of green button app or something called vibrate which automatically starts when i boot up however never installed, just ran as a .exe and it does what i want- almost- it vibe's on connect however it is a little late and the vibration is too much and not subtle like the htc diamon dialpad one- if anyone can get the vibrate on connect feature from the diamond dialer it would be apprieciated- also how can i stop this new vibrate.exe from running?
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
beastfellow said:
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
Click to expand...
Click to collapse
the value is 1
and not Vibrate after connect
thank you
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
The Jack of Clubs said:
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
Click to expand...
Click to collapse
To return to WM dialer
HKLM\Security\Phone\Skin
set (Enabled) to 0
soft reset
I used Advanced Config v3.3 to revert to the WM 6.5 dialer (which I actually like a lot more than I thought I would), but I also lost the vibrate functionality, which I really enjoy, since where I work my signal fluctuates a lot, and even though I'll show good service on Sprint, it often won't connect, and I'll just hold it in my hand, or put it down on the table and wait for it to actually go to "connected" when I hear/feel the vibrate.
When I go into the Phone options Advanced tab I still have the option to "Vibrate on Connect", but it doesn't work, either checked, or unchecked.
Anyone able to get their phone to vibrate on connect using the WM6.5 dialer?
This isn't a dealbreaker for me, or anything, as I prefer the speedier WM dialer over the delayed HTC dialer (especially when the unit is locked), but it would be nice to get it back.
Vibration on connect
vibration on connect and Slide unlock bugs existent in all cooked ROMs in this forum. I trial all ROMs and found it. If you know the resolves please post it here. thanks
i have the same problem and i would like to know how to fix it ..
thanks all
-Did you try using "Pocket Shield"?, i use it with Da_G 6.5 rom too.
-It's a locking program with amazing options to lock/unlock your device (with light, stylus, slide, gestures)
-AND has the option to vibrate when call connected and is as subtle as de touch pro/diamond dialer. Just a short vibration after the call is engaged.
-Works great for me...
-IT IS NOT FREEWARE though... googleeeeeeee
The solution
Dear my friends ,
here is the solution.
A little CAB for you ;D
Greez,
kvNN_
hi,
have problems for install this cab...
have a error and don't possible install... any idea ?
I have a HTC Diamond and WM 6.5 ROM.

Categories

Resources