Related
Not sure the history of the device, however it will go to Tri colour screen and allow flashing of certain rom, i.e. the custom get out of jail rom and other - Mr Clean, etc..
however after flashing they boot backup and sit on the boot screen in the case of custom rom, displaying the beer glass?
Err, help.
More
button custom rom
IPL 1.01
SPL 2.24
GSM 01.12.10
OS 1.5.4.2
Thanks.
lokidan said:
button custom rom
IPL 1.01
SPL 2.24
GSM 01.12.10
OS 1.5.4.2
Thanks.
Click to expand...
Click to collapse
If you haven't already, go to the thread for how to CID unlock your phone:
http://forum.xda-developers.com/showthread.php?t=285435
Since your IPL is 1.01, you can start at step 4. The key is that after you run lokiwiz, you need to get your SPL down to 1.x also, so you'll need to flash the Button ROM. A few people have mentioned they have had to flash it a number of times (like up to 8 times) to get both IPL and SPL to go down to 1.x (not sure why, but its happened a few times). AFter you get both IPL and SPL down to 1.x (on only after both are at 1.x) then continue with those instructions to flash an official ROM (the TMobile 2.26 one is linked in that thread and is a preferred one to use no matter what carrier you plan on using). Once that is done you will have a fully functioning phone running the latest official base rom. From there you can flash other custom roms if you so desire.
Good luck!
sorry, I didn't fully think about what your first post is saying. To do what I said above assumes you can use the phone in the current condition, but now I don't think thats the case. You should grab the Button ROM and flash it to see if you can get it to function (just flash it directly at the Boot screen). If that doesn't work, go get the TMobile 2.26 ROM and go ahead and try flashing it. if that doesn't work, then find and flash the Wizard Love rom. After getting one of these to work (and one of them should) then follow the CID Unlock procedure exactly (to downgrade, run lokiwiz, downgrade again, upgrade to 2.x).
further info
Thanks for getting back to me much appreciated.
I was under the impression that lokiwiz will not work unless your machine boots up?
Mine gets stuck on the initial button loading screen (beer glass)???
Will check through your link, i have been doing lots of reading etc, but cant find the definitive answer.
help
ahh, thread cross over
Will try the love rom.
Keep you posted.
Once again thanks.
tried Button Rom
Still stuck on the magic beer glass
5th time or re roming.
Cant get love rom quickly enough.
If you can do Torrents, search for Wizard_Love on PirateBay. Then just use uTorrent or BitComet to pull it. Its seeded and shouldn't take too long.
Hi all, i am stuck, i need the help of the experts in either saying my 2 Qtek 9100s are bricked - chuck them or, they are retreivable.
Here goes:
2 X Qtek 9100 made by T-mobile - emei if needed.
Both devices stuck on the boot screen, but will both go in to Tri colour screen for flashing, but fail flashing (with several roms), i think they have button rom, its a beer glass.
GSM: - 01.12.10
OS: - 1.5.4.2
ipl 1.01 and spl 2.24
Can these be revived?
Thanks.
A Wizard by T-Mobile is a "MDA Vario", you can't have a Qtek9100 by T-Mobile. Anyway..
Have you tried flashing official ROM while they are in bootloader mode (tri colour)? Does the flashing process went smoothly? Does the IPL/SPL change when you flash the latest ROM? Give more info.
More info
At present both of them are stuck on the info below, i cant reflash them with anything else now.
Official T-mob rom 2.26 will not work...think the error was [239] or something.
Thanks.
lokidan said:
At present both of them are stuck on the info below, i cant reflash them with anything else now.
Official T-mob rom 2.26 will not work...think the error was [239] or something.
Thanks.
Click to expand...
Click to collapse
sounds like u didn't accomplish step 16 of 'the definitive guide to unlocking & rom upgrading G3 wizards' by Dr Puttingham.
both IPL AND SPL need to be the same
lokidan said:
At present both of them are stuck on the info below, i cant reflash them with anything else now.
Official T-mob rom 2.26 will not work...think the error was [239] or something.
Thanks.
Click to expand...
Click to collapse
what was the exact error.. post the code and error msg.
i got the same problem
ipl/spl 1.01
i tried "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
many many time but nothing
please help
bigfatjack said:
i got the same problem
ipl/spl 1.01
i tried "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
many many time but nothing
please help
Click to expand...
Click to collapse
Since your ipl/spl are 1.xx just follow the sticky by Dr. P at the top of this forum. You will start at the step running lokiwiz as you don't have to downgrade. Then upgrade to an official 2.xx rom. After that you can flash a custom rom.
errors
Various error messages with various roms.
Invalid vendor
Invalid nkbf file
Upgrade only
I believe that these devices were upgraded by a user who perhaps did not fully unlock them.
Is it possible these devices would exhibit these error if they were flashed with a G4 rom, or would they just not boot if that was the case?
Thanks ALL
lokidan said:
Various error messages with various roms.
Invalid vendor
Invalid nkbf file
Upgrade only
I believe that these devices were upgraded by a user who perhaps did not fully unlock them.
Is it possible these devices would exhibit these error if they were flashed with a G4 rom, or would they just not boot if that was the case?
Thanks ALL
Click to expand...
Click to collapse
Well, the only difference between a G4 and a G3 rom is that the G4 rom will not contain IPL/SPL. If you flashed a G4 rom in a G3 device you are fine. If you flashed a G3 rom into a G4 device then you have bricked your devices.
In your case you haven't finished the unlock/downgrade process. like mentioned above you seem to have missed step 16.
You need to re-flash the button rom to get both the IPL and SPL to 1.01. Once that is done then flash an OFFICIAL carrier rom (T-Mobile 2.26 suggested). When you have completed that then your IPL/SPL will both be 2.26. From THIS point you will be able to flash a custom rom, you will have no success until then. The unlocking guide that is stickied contains everything you need to recover from your situation.
The 2 steps that most newbies forget is to downgrade a second time to get IPL/SPL to 1.01 and after you are completely unlocked then upgrade to an official carrier rom that includes IPL/SPL (note this unlocking procedure is not for G4 devices -- doing this will brick them) Once your IPL/SPL are 2.xx THEN you can flash custom roms.
Unlocking them
Thanks ZZan, i think though i have actually blown the rom with button, but it does not bring the ipl/spl down to 1.01, it appears to blow the rom and complete 100% reboots and comes up with button Beer glass and goes no further.....
Err help?
lokidan said:
Thanks ZZan, i think though i have actually blown the rom with button, but it does not bring the ipl/spl down to 1.01, it appears to blow the rom and complete 100% reboots and comes up with button Beer glass and goes no further.....
Err help?
Click to expand...
Click to collapse
Have you tried booting into bootloader and putting your carrier's latest rom back into it? I would suggest this. If all works and you can get completely back into the phone, you could try to unlock again starting from the beginning.
The only way you could have really hurt your device is if it was a G4 before you started, or interrupted the flash process while the bootloaders were being written. I don't think it would even boot up to that screen, or flash to 100% if this were the case though. It sounds like a bad flash from the first button attempt. I would suggest using a carrier rom from the carrier that the phone is locked to to get it back to working status. Once there then you can try to downgrade and unlock again.
Are they G3 or G4
How do i tell again, something to do with the ipl/spl revisions?
You can also try re-downloading the button rom and performing the downgrade again. I have the button rom in my sig. it's possible the rom may be damaged in some way.
G3 or G4.. from the wiki
A G3 Wizard will have the following
IPL: 1.xx or 2.xx or 2.xx.00x (Note that this version only has TWO 0's.).
SPL: 1.xx or 2.xx or 2.xx.00x (Note that this version only has TWO 0's.)
A G4 Wizard will have the following
IPL: 2.xx.000x (Note that this version has THREE 0's.)
SPL: 2.xx.000x (Note that this version has THREE 0's.)
button rom
Any ideas where i can get this rom from?
thanks.
Ignore me
just seen it on your footer
It flashes but....
it goes all the way through 100%, reboots and sits on rom boot screen exibiting:
IPL 1:01
SPL 2.24
GSM 01.12.10
os 1.5.4.2
And a nice picture of a beer glass....
Help, should i reflash again? i Have done it 3 times and it still sits on boot....
Thanks.
lokidan said:
it goes all the way through 100%, reboots and sits on rom boot screen exibiting:
IPL 1:01
SPL 2.24
GSM 01.12.10
os 1.5.4.2
And a nice picture of a beer glass....
Help, should i reflash again? i Have done it 3 times and it still sits on boot....
Thanks.
Click to expand...
Click to collapse
You said your phone was a T-Mobile phone. Flash the T-Mobile 2.26 rom and see if you can get it to finish booting. If so THEN you can retry the button rom. You are in a corrupt state right now. Whatever caused it, it doesn't look like the button rom is going to recover you from it. Flash the official carrier rom for your phone and get it back to working status first. Once you can use the device and phone then you can go back and start from the beginning of the unlocking thread.
T-mob original
I have tried T-mob original (RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe)
[294] invalid vendor ID
I have tried t-mob (RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe) using NoVendorID and nk.nbf from above rom - Flashed 100% complete - rebooted - stuck on Button boot screen (beer Glass) and not booting.
Button itself will flash, with the same result, looks like its doing it then reboot, halt on beer glass.
I have i trully bricked these two? i cant have they flash and go to boot loader surely they would not do this if i had totally bricked them???
Help....
T-mob
Weird, it has upgraded the IPL to 1.06 (from 1.04) though, does this mean anything to anyone?
hi...
i am a little noob when it comes to rom upgrading. so, i apologise if this is a stupid question. i flashed my wizard with wizard love rom. the ipl and spl both show 1.01 and os 2.26.10.2..but, no gsm.also, my phone doesn't catch signals.now, if i need to flash a radio rom, which radio rom should i flash, and is there any risk of bricking my device ??
thanks..
puja
There's very little risk (I'm definitely not going to say there's none because you always take some risk when flashing) with flashing a radio ROM. I kind of curious though, most people only flash the wizard love ROM so they can CID unlock before going on to flashing other ROM's such as a WM6 version. Are you planning on keeping the wizard love ROM as your OS? Which radio ROM you decide to flash kind of depends on where are and what ROM you're using. 2.19.11 seems to be the most popular one to flash though. Check the wizard wiki if you need to download it.
Basically flasing Radio ROM will not brick the device, and it also does not require CID unlocking.
Beside 2.19.11, 2.47.11 and 2.69.11 Radio ROM are also popular.
If you have unlocked your device after downgrading IPL and SPL, just get a 3.08 IPL/SPL upgrade package and you will get all IPL/SPL/Radio ROM upgraded to the most current version.
p.s. You now have IPL/SPL 1.01 that is too old and should be upgraded (Instead you MUST upgrade to at least 2.xx if you plan to use WM6)
i was earlier having ipl n spl 2.xx..but i wanted to unlock my device.so, i downgraded to button's 1.05 rom..but i couldn't unlock it (See my post in the topic 'The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards'), after which i decided to simply flash the love rom...
What by mean of "couldn't unlock"?
What error is shown from lokiwiz/aWizard?
p.s. Unlocking require ActiveSync connection
edit. sorry
starkwong said:
What by mean of "couldn't unlock"?
What error is shown from lokiwiz/aWizard?
p.s. Unlocking require ActiveSync connection
Click to expand...
Click to collapse
when i run 'lokiwiz.bat' as instructed, it says 'your phone is now unlocked', but my device doesn't reboot..u may read my post in ''The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards"..is there any way to check if my phone is unlocked or not ???
Search for and download wizard service tool. It has a button on it that you can press and it will tell you if you're unlocked or not.
I'll save you the searching since about 10 seconds after I wrote that last post I saw the wizard service tool thread. It's here - http://forum.xda-developers.com/showthread.php?t=295038
Hi, Ive looked around the forum and cannot find a solution to my problem. Ok, step by step here is what I did: I used the button 1.05 custom ROM, this was installed successfully. Then I used the definitive guide to unlocking the G3 wizard using the lokiwiz tool and this was successful as far as I know. I then upgraded to the t - mobile 3.08 ROM as this was recommended before upgrading to a WM6 ROM. This is where the problems began. I tried to flash Faria's WM6 crossbow rom and partway through the flash it hung and got stuck in bootloader mode. I read around the forums and tried to downgrade back to button 1.05, the tmobile 3.08 rom, and also the cingular 2.25 rom. The furthest I got was about 49% on the progress when my phone returns to the bootloader screen. My phone always seems to do one of two things: I either get a communication error "with my pc" which starts the recovery process(which never actually works) or I get error 274 which says that I am no longer connected to my pc (even though it still says "usb" on the screen of my pocket pc. I know that my battery will soon run out and I will have to buy a new one to resume trying to get my phone to work again. I ve also uninstalled active sync, re- down loaded and installed it, rebooted my computer (as was suggested) and this didnt work. Some one please help me as I am pretty new at this and cannot find this exact issue on the forums. Any help will be greatly appreciated!!!
Try to flash on another PC.
Ok I've tried to flash it on 3 different PCs and I havent been able to make it work, any other suggestions?
You have misread and misunderstood the definitive guide.You are confusing T-mobile 2.26 and IPL/SPL 3.08,its T-mobile 2.26 and not T-mobile 3.08. T-mobile 2.26 is a Rom ,an OS (Operating System) and IPL/SPL 3.08 are the latest upgrades to Bootloaders and not a rom.
Now,after downgrading with Button's Rom 1.05,your phone's IPL/SPL must have been 1.05,then you applied lokiwiz02b to SIM/CID unlock the phone,but ipl/spl must have remained 1.05 as you had Button's Rom 1.05 installed on your phone.
In order to upgrade to wm6,its required to have IPL/SPL 2.xx,so you were supposed to flash T-mobile 2.26 to get your IPL/SPL 2.26,but,instead of flashing t-mobile 2.26,you flashed IPL/SPL 3.08,so you have now IPL/SPL 3.08,correct ?
IPL/SPL 3.08 is an option to upgrade your IPL/SPL (Bootloaders) but upgrading to T-mobile 2.26 is recommended,so that you get IPL/SPL 2.xx to upgrade to wm6.There's your mistake,got my point ?
So,now try to downgrade to ipl/spl 2.xx or 1.xx,to do so,download the official carrier's rom of your phone from it's website and flash to get back to its original default status.
After that reread the guide correctly and follow the method.
Good luck
Thanks for your help, I'll try that and let you know how it turns out.
OK i downloaded the official cingular ROM 2.25 and attempted to flash it. I got about 76% done and got a communication error. I've tried to do it several times since then with no luck. However, my ipl and spl did change to 2.25. What should I do now?
Anybody have any suggestions? I'm dying here guys I would really appreciate some help, thanks
ok,get into Bootloaders (tricolor screen)check usb appear at the bottom of bootloaders,,try to get down to ipl/spl 1.xx,first try with button's rom,if it works,fine,otherwise try xda_minis_launch rom or wizard_love rom,if any of them installs,download WST tool and check the status of your phone by hitting the 'CID Action' button.It'll verify if your phone is locked or unlocked,ok,if unlocked then flash t_mobile 2.26 and if locked,run the lokiwiz02b again to unlock.
while flashing,turn off any antivirus,firewall and don't surf the net,check email or play any games.Leave the phone and pc alone.Must have a fully charged battery.Delete partnership with activesync and uncheck 'Allow usb connection' in the activesync,it helps sometimes.Try with a different usb cable or plugin usb cable in other usb input slot of the pc.I do hope,it might do the trick and work out fine.
Good luck
ok so after reading many many times and attempting to flash to 1.05 which worked but i was never able to upgrade. I used the shell tool to try and get XM6R5 to flash and it locked up. since then the phone now starts to boot but locks in on the button rom (from button with love) and shows
IPL 1.05
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
After sitting on this bootup screen for over a minute the picture looks shaky??
So i attempted to reflash to 1.05 again and it goes all the way to 100% and tells me successful and reboots then locks up! So i try to flash back to Tmobile rom and i get a 296 error: ERROR {296} : UPGRADE ONLY This NBF file cannot be used for your PDA phone. please get new NBF file.
The usb and active sync wont work either.
I even held the comm and voice button and pushed reset and tried to format and it says format failed.
Please help, i now wish i never attempted to flash to WM6. This is a brand new replacement MDA and i figured i would attempt to upgrade it before i did anything and now it seems locked!
ok,as long as it gets stuck at the loading splash screen of button's rom,it ain't dead yet.
First,how did you get SPL 3,08 ?,did you flash the ipl/spl 3.08 before flashing the button's rom 1,05 ?
Secondly,There was no need to upgrade with 'Shell Tool',after downgrading to ipl/spl 1.xx by button's rom,you shud have used 'lokiwiz02b' to SIM/CID unlock the phone and upgraded to any wm6 Rom.Try to get the phone in bootloaders mode(Tricolor screen),if it gets there,download the official carrier's rom of your phone from its website and flash it in the bootloaders to bring the phone back to its default status.After that downgrade with button's rom 1.05 and SIM/CID unlock your phone with 'lokiwiz02b' and upgrade to wm6.
its very hard to brick it fortunatly
let us know if you succeeded , it might help others
I flashed to 1.05, then tried tmobile 2.26, once i did that i upgraded to 3.08 which made ipl/spl 3.08. I tried several times to reflash to 1.05 again and the ipl changed back but the spl stays at 3.08. I have flashed several times to 1.05 and the spl will not change from 3.08(how can i make it do this) So now that the 3.08 is stuck there the original tmobile rom wont install and it gives me a 296 error when attempted.
I have taken the battery out and gotten into bootloader on reboot however, when i flash to 1.05 or tmobile and it goes thru the cycle... once it gets to 100%(I also get the pop up that says upgrade successful and hit ok) the phone reboots and then gets stuck again in the splash screen?!?! then the screen gets shaky looking as well?
oh and i used the shell tool because everytime i downloaded the button rom the ipl only changed to 1.05 the spl would never change from 2.26 to 1.05 and i tried several times to flash. then using lokiwiz2b it would NEVER unlock the phone. Kept giving me an internal error. Maybe because the extracting of lokiwiz automatically would open the program when i downloaded in mozilla firefox? is this IE use only maybe?
So anyhow i thot shell tool would be best to use since i couldnt unlock it. Guesss not.
I wish one of you guys lived right down the street so we could do this together or maybe i just call one of you geniouses
mjakaz78 said:
oh and i used the shell tool because everytime i downloaded the button rom the ipl only changed to 1.05 the spl would never change from 2.26 to 1.05 and i tried several times to flash. then using lokiwiz2b it would NEVER unlock the phone. Kept giving me an internal error. Maybe because the extracting of lokiwiz automatically would open the program when i downloaded in mozilla firefox? is this IE use only maybe?
So anyhow i thot shell tool would be best to use since i couldnt unlock it. Guesss not.
I wish one of you guys lived right down the street so we could do this together or maybe i just call one of you geniouses
Click to expand...
Click to collapse
hmmmm, thats the mistake.After downgrading to ipl/spl 1.xx after flashing button's 1.05,you shud have first sim/cid unlocked the phone and then flashed t-mobile 2,26 to upgrade to ipl/spl 2.xx.Then shud have upgraded to any wm6 roms,upgrading to ipl/spl 3.08 is not at all necessary for upgrading to wm6,but an option,where as,ipl/spl 2.xx is only required for wm6 upgrading.
You,instead,of getting your phone sim/cid unlocked,flashed and upgraded to 3.08,but to sim/cid unlock,its required to have 1.xx,now it won't downgrade to 1.xx with button's rom.Its very commonly observed that after upgrading to 3.08 without getting the phone sim/cid unlocked,it becomes a pain in a** to downgrade to 1.xx and unlock.Now its a catch22 situation,where it doesn't downgrade to 1.xx for unlocking and nor accepting any other rom flash,its stuck at splash screen at 3.08.
Now,the only solution is to get the phone back to its default status.Try to flash either official stock rom,button's rom,if button's don't work,try the xda_minis_launch rom or the wizard_love_rom in the bootloaders mode.You got to keep your patience and it might take several flashes with either of these roms to get through.
Good luck !!!
thank you, im going to attempt all this now, ill keep everyone posted!
ok heres the scoop...
ive tried the tmobile official rom 2.26 upgrade and the xda_minis_launch rom and the wizard_love_rom (Love rom seems to be in a foreign language and gives a error 300) in the bootloaders mode and every time it will refuse to read the usb and gives me either a 264 or 296 error with these roms. Not sure why the phone says its not connected for the above roms but will read buttons rom still saying its not connected
The only rom that seems to read for whatever reason is buttons rom and i have flashed it 5 times at least now and always tells me it works but then gets stuck in bootloader with a glass of beer and the same ipl-1.01 spl- 3.08 gsm- 01.12.10 os- 1.5.4.2
so i dont know what to do!! there must be someway to get this thing to work!
Yes ! I understand it sometimes becomes very annoying and frustrating,but you got to keep cool. believe me and I can assure you there's nothing wrong with your phone as long as it can get into bootloaders.It's just that the bootloaders have got corrupted and stuck on spl 3.08,its only spl 3.08 which is creating all the problem,untill and unless it doesn't downgrade to either spl 1.xx or 2.xx,it'll not be possible to flash any other rom.now the only way to get the bootloaders corrected is to flash any official rom to bring both ipl/spl to 1.xx or 2.xx.
ok,when you get the phone in bootloaders and connect the phone via usb,does a small usb appear at the bottom of the bootloaders screen ? forget about the activesync for a while,cuz activesync doesn't work or get connected in bootloaders.The only way to verify if the phone has established connectivity with the pc is to verify if usb appears in the bootloaders.Rather I'll suggest you to delete the partnership with pc in activesync and uncheck the option 'allow usb connections' in the Async.If its verified that usb appears and has connection in bootloaders then you are good to go and run RUU,but if there's a problem and it doesn't show in bootloaders then your usb is not establishing proper connection.In that case,either the usb cable is faulty or the mini usb port of the phone is damaged.Check and verify this.
Secondly,lets try to flash the Rom with replaced RUU like 'RomUpdateUtility_wizard_Noid', or 'newromupdateutility_wizard_noid' or 'Ruu_Mun',you can find them in the forum.Either copy and replace it with ruu in the rom or copy and past 'nk_nbf' in the rom to the folder of these RUU and try to flash in the bootloaders,but first confirm the connectivity of the phone via usb as explained above. Hope this might do the trick,lets hope so!!!
Cheers!
I had a same problem like you. Here is the solution: http://forum.xda-developers.com/showthread.php?t=276963
not my idea. Works great. Martin
maty said:
I had a same problem like you. Here is the solution: http://forum.xda-developers.com/showthread.php?t=276963
not my idea. Works great. Martin
Click to expand...
Click to collapse
ok,was your phone CID unlocked when you did back up with sdcard using 'Mtty' program ? cuz its not possible to go through recovering back by this method if the phone is CID locked,the rom will not back up to sdcard,it'll give error.Here his phone is still Cid locked and he has upgraded to 3.08,now it won't let him downgrade to ipl/spl 1.xx to use lokiwiz02b and SIM/CID unlock his phone.
Cheers!
ok here is the problem im having now. ANY ROM i attempt to flash to in bootloaders mode or 3 colored screen WILL NOT WORK! it gives me a 264 error on any of them besides button rom. I have tried several times to upload tmobiles official rom and it tells me i have to get a newer nbf file!
I pop the battery out and wait a few seconds and then hold camera button and power, (now in bootloaders) i then plug in usb and the USB letters do show on the bottom left hand side. I also disabled allow usb connection on active sync.
i wish i understood why no other rom except buttons will flash? even muns ruu wont work, it gives me a 300 error invalid update tool!