Related
Many users have been requesting the ROM for the production MDA's. I tried to upload it to the XDA-Developers FTP site but I could not upload it to the T-Mobile ROM directory so if a moderator can download this from the link I provided and move it to the FTP server for long term access.
Specs are as follows:
ROM Version 1.8.10.2 WWE
ROM Date 12/10/05
Radio Version 01.09.10
Protocol Version 4.0.13.20
This does not include the Extended ROM as that is already provided in the link below as this is where this request for the full rom was initiated.
http://d01.megashares.com/?d01=efbcdfc90bfae88ed9ac9ec8fcda5cc6
Scroll to the bottom of the page once you go to the megashares link and you will see the Download Now link.
If you need the Extended ROM follow this link: http://forum.xda-developers.com/viewtopic.php?t=41348
Question - you can't just flash back the extended ROM, right?
Yes but it is not the same procedure as backing up or writing a new ROM as you need a utility which I mention below. What you need to do is first "Unlock/Unhide" the hidden Extended ROM partition on your MDA. Once you do this you can see the extended ROM files which are posted in the link above. (There is a utility called Unlock Ext Rom Wizard.cab) on the XDA FTP server. You copy this to your MDA and click on it and it should unlock the parition/folder. After running it I would do a soft reset.
You can then use ActiveSync's Remote File Explorer Utility to move the files around as you will see the new partition when you select change folder.
Basically you copy your original extended ROM files to a safe location for backup and then delete all the files in the extended ROM directory. Copy the Extended ROM files that you downloaded into the Extended ROM directory and once you do a hard reset it will automatically install the new files when it boots up.
Ah, ok... thanks - I don't see the unlock tool for the Extended ROM though....
Nevermind... found it.
any changes, improvements or modifications worthy of mentioning in this ROM?
thanks,
How do you change the boot screen. I only see the ability to restore the radio and OS...
Extended rom is read only.. Please tell me that I am not going to have to reflash with an old rom to modify the extrom...
bradleydick said:
Extended rom is read only.. Please tell me that I am not going to have to reflash with an old rom to modify the extrom...
Click to expand...
Click to collapse
My Extended Rom is writable, but is still hidden. I think it may be due to the fact that I used aWizard 1.3b2 (from http://forum.xda-developers.com/viewtopic.php?t=37386) to remove the CID lock from my phone and change the splash screen. I then also patched my radio to 01.13.10.
Can the original poster explain how to restore the T-Mobile ROM? The utility that is in the folder did the CID unlock on my phone and all that successfully, but when I do option "w" (write OS ROM to device), it doesn't "find" the T-Mo ROM right there in the folder. I don't get it. =(
shdwphnx said:
bradleydick said:
Extended rom is read only.. Please tell me that I am not going to have to reflash with an old rom to modify the extrom...
Click to expand...
Click to collapse
My Extended Rom is writable, but is still hidden. I think it may be due to the fact that I used aWizard 1.3b2 (from http://forum.xda-developers.com/viewtopic.php?t=37386) to remove the CID lock from my phone and change the splash screen. I then also patched my radio to 01.13.10.
Click to expand...
Click to collapse
How do you find Radio 1.13.10 over the OEM delivered version? Any significant improvements?
Genesis3 said:
shdwphnx said:
bradleydick said:
Extended rom is read only.. Please tell me that I am not going to have to reflash with an old rom to modify the extrom...
Click to expand...
Click to collapse
My Extended Rom is writable, but is still hidden. I think it may be due to the fact that I used aWizard 1.3b2 (from http://forum.xda-developers.com/viewtopic.php?t=37386) to remove the CID lock from my phone and change the splash screen. I then also patched my radio to 01.13.10.
Click to expand...
Click to collapse
How do you find Radio 1.13.10 over the OEM delivered version? Any significant improvements?
Click to expand...
Click to collapse
When disabling Flight Mode, the original radio took about 30 to 45 seconds to get a signal. The new radio takes closer to 2 minutes. However, the new radio gets 3 bars of signal in places the old radio only got 1. I consider a reasonable tradeoff, as I don't use Flight Mode very often.
for updating the os rom and radio rom, it says please type the number, what number do i type?
jthurs said:
for updating the os rom and radio rom, it says please type the number, what number do i type?
Click to expand...
Click to collapse
I had that initial problem myself. I had to copy it to my C:\Flash since it didn't seem to work correctly off my g: drive under a few folders deep. I looked at the .cmd (batch) file at what it does is do a dir /s (directory listing including looking under subfolders) for *.nba files looking for radio or os in the filename. If you do not see a number then it is not finding the .nba files. When it does find them you will see the name of the rom file preceeded by a number. I would do what I did with the directories and if that doesn't work copy the .nba files into the root folder of the .cmd file folder.
i try to restore the rom with this flash.. the version on my phone is
rom : 1.8.10.2 WWE
rom date : 12/10/05
radio version 01.04.10
protocol version: 4.0.13.17
extrom version: 1.8.10.104
Hello,
Anyone has this rom ( Version : 1.8.10.2 )? If so, is it possible please upload. I'm searching for a wizard ROM which shows MM/DD/YY in device info ( i.e 12/10/05 ).
I request again, if you have please upload coz its urgently needed for me.
Best Regards
This ROM should have what your looking for.
LINK
-MyHTC- said:
This ROM should have what your looking for.
LINK
Click to expand...
Click to collapse
Thanks a lot. I was searching for this since from yesterday and there were no working links.
Anyway, thanks again.
Best Regards
No problem. Glad I could help.
dont mean to intrude, but i needed a production cingular rom for my g4 version 2.25 can anyone help?
Wm os 5.1.195, rom 2.26.10.2wwe
TMO has moved things around, but you can find instructions and download links for Microsoft Windows Mobile Version 5.0 OS 5.1.195,
and ROM version 2.26.10.2WWE on their US website at
http://support.t-mobile.com/doc/tm23294.xml?&A2L.SERVICE=UpdateSoftware.
So, guys, here is the first test SSPL for breeze. I have no breeze, so please report if it works.
extract to your device root!!!
start spl.lnk AND immediately press POWER and CAMERA buttons. (or try hust CAMERA)
if the screen shows sth like spl 1.01 DFR, then everything is ok - it is my spl
this version was intended to allow you to flash any CID rom update and unsigned nbh files. the next release will be based on the latest spl and include compatibility with new RUU of 1.34 rom updates and the feature to fix bad blocks.
EDIT - may 10, 2007 - SSPL V1 works successfully
CID check - disabled
NBH check - disabled
attached spl in nbh format for flashing - breeimg.zip
Thanks to:
DES for his SSPL
Olipro for his hard spl which actually saved me from hours of IDA analysing - I simply compared his spl to original and patched the one from breeze
at first try...
i have exactly what i descriped here:
http://forum.xda-developers.com/showpost.php?p=1253965&postcount=782
after the reboot i can't get into the bootloader...
what did you changed in the spl ?! or in the sspl.exe ??
I try... It's WORK!!!!!
what did you do??
edit:
ok, strange things goes on here ... just tryied it another time yet...
ipl-sspl by Des
SPL-1.01
should work
if i have time today i will try to made an cooked rom ...
if this works i look for a way to extract the files out of the excalibur wm6 rom ...
edit2:
i now have the problem that i can't connect mtty to bootloader... mtty ends with error when producing the cmd command line... i just had this problem with hermes to... i have 2 mtty version on all the 2 the same error...
i will try it now on a other machine..
1) Rename the BREEZE_HTCEUR_1.34.251.1_SHIP.nbh file to BREEIMG.nbh
2) Copy to sd card
3) start spl.lnk and immediately press POWER and CAMERA buttons
4) Phohe start in bootloader and flash new rom. (but no new radio)
THX
Thx for the replies, i`ll try to make a newer sspl. also, let`s begin the work for wm6 for breeze based on hermes rom... but in another thread some time later
can anyone confirm that they have sucessfully flashed a cooked ROM onto a breeze? Please update the wiki.
doedoe said:
can anyone confirm that they have sucessfully flashed a cooked ROM onto a breeze? Please update the wiki.
Click to expand...
Click to collapse
Hi, i work on it!!
on afternoon/evening i will try to cook a rom with a few freeware tools bases on the actuell rom!!
i can begin working on wm6 rom recently when extract the excalibur content... because of the problem that breeze is a smartphone an hermes a ppc there would be some problems with coredll's of the system! because of that i need smartphone wm6 rom... befor that there is no wm6 on breeze possible!
....
can anyone else can try mtty with the sspl ?
-----
engel98 said:
1) Rename the BREEZE_HTCEUR_1.34.251.1_SHIP.nbh file to BREEIMG.nbh
2) Copy to sd card
3) start spl.lnk and immediately press POWER and CAMERA buttons
4) Phohe start in bootloader and flash new rom. (but no new radio)
Click to expand...
Click to collapse
this should work when you have a new spl installed - and you want to flash another cid rom!!
has nothing to do with unsigned code!!
!!! only for understanding!!
hey what should i say...
it just look like that it works...
i have cooked a rom now...
only small reg changes!!
i have flashed it with hermes RUUUpdaterV2
only a OS file!
Phone boots! now i have to check if the changes are taken over!!
But why not ;Þ
Please post to the wiki.
I am hoping that we can use tornado WM6 code to cook a WM6 image...
I just added some Infos to wiki!!
Updated:
Breeze/MTeoR Upgrading Guide (4Hard/S-SPL)
Custom RUU Updater
I can also confirm that this SSPL truly works, but I am still unable to flash 1.38 radio over 1.29 currently installed with this SSPL version.
Any hints when could we expect SSPL based on some newer SPL release (like 1.09 or 1.10)?
just extract the radio rom what you want from an shipped rom ...
take it and re nbh's it with the nbgehn utility ... than put it in the custom ruu folder start ruuwrapper and flash it...
futureshock said:
just extract the radio rom what you want from an shipped rom ...
take it and re nbh's it with the nbgehn utility ... than put it in the custom ruu folder start ruuwrapper and flash it...
Click to expand...
Click to collapse
Tried that 3 times already. Doesn't work! Although process finishes whithout any glitches, System Info still says Radio ROM 1.29.00, and my phone still acts like crap...
.... i tried it too ... no problem... you should have done a mistake...
download an usb sniffer and let it run when updating... maybe then we can see the error...
but i had done it too... with sspl had no problems!!
I confirm this is also work on my dopod 595.
Now I need to search how to change the splash screen
what would you want to change??
futureshock said:
.... i tried it too ... no problem... you should have done a mistake...
download an usb sniffer and let it run when updating... maybe then we can see the error...
but i had done it too... with sspl had no problems!!
Click to expand...
Click to collapse
This is what I did/have...
- I have installed Radio ROM 1.29.00.10 (with older 1.32.251.1 RUU)
- My MTeoR is CIDed QTEK_A07 - all available RUUs fail with INVALID VENDOR ID error
- If I use SSPL (linked in this thread), my MTeoR actually does start SuperCIDed and I can run any RUU or custom ROM, and although all of them complete with success Radio ROM DOES NOT CHANGE at all.
My theory is (based on posts in Hermes upgrading forum) that Radio ROM 1.29 installed Radio BL 0108 which in turn does not allow flashing Radio ROM when started SPL is pre-1.09 codebase. I presume that it flashes with 1.09, 1.10 or newer only (makes sense because HTC released new 1.34 RUU which first installs SPL 1.09, then the rest of ROM).
Can anyone concur with my assessment or am I completely wrong?
Ohhh,thank.It works perfectly on my HTC MTEOR from O2 Czech Republic.
sp3dev said:
So, guys, here is the first test SSPL for breeze. I have no breeze, so please report if it works.
SSPL V1 works successfully
CID check - disabled
NBH check - disabled
Click to expand...
Click to collapse
WOW
I have now read for weeks the Hermes/Trinity threads wondering if this would be possible for "simple" smartphones too - and you did it
So while it is possible for the MTeor, maybe your kind of patching the SPL would also work for the Excalibur/S620?
I would love to flash my O2 Cosmo, but want to have an original ROM Backup for warranty/fallback reasons.
I also found out that it is possible to extract and cook ROMs for it like the way for the Hermes - but I cannot flash because of this f****g need for signed .nbh.
May be you are able to do this MAGIC on a Excalibur SPL too?
I would try out on my phone if you want to take the challange - if it doesn't work I think I'll have to get a MTeor
Anyway - lots of thanks for your work - and giving me back my hope on smartphone ROMcooking
i need the TMobile_PL_MDAIII_WWE_12200_183_10602_SHIP rom...help?
almost impossible to find it, it is very old rom
Nothing is impossible
TMobile_PL_MDAIII_WWE_12200_183_10602_SHIP - I think this is the one:
http://www.zshare.net/download/220675884b91fb/
and PLEASE - give more meaningful names for the threads.
jakubd said:
/*snip/*
give more meaningful names for the threads.
Click to expand...
Click to collapse
hehe sry for that i was histerical at the moment
btw jes i know it's an old rom, but im 100% shure it's a tmob003...
but not shure if its a pl or nl,so in about 2 min i'm gona find out
sry for my bad english...and many tnx from croatia
edit:
it look's like (didnt run th device info) PH20B 0 B ENG G T-MOB003 1.06.00 0 0 1.06.118 1.00.00 00.00(i' have the 1.06.00 rom...and i'm preaty sure that the radio was a 1.00.00)
it simply lost its rom(wtf??) and it has a id lock on it( so no tmobile uk roms and simular stuf...
well i'm gona try youre rom now...hope i finaly found what i'm looking for
rom update error...it starts to flash but spits out a error?how can i fix that?
You have to be more precise. Rom you asked it made for Polish edition of MDA3 (for Era GSM network; ROM is in english). It won't flash without "a bit of fight" on any other device (because of CID check - for this ROM I think it should be T-MOB009). I don't know which country had T-MOB003, but it wasn't Poland/Era GSM.
Please tell us, what would like to get, we will try to help you.
If you just want to know how to get rid of CID-check problem, read wiki. There is information how to modify ROM file to your hardware CID and also you can find upgrade tool that skips CID check.
t-mob003 is nl..99% sure...
PH20B 0 B ENG G T-MOB003 1.06.00 0 0 1.06.118 1.00.00 00.00
this shuld be mine?!?i tried to remove the cid...nothin hapend
its t-mobile.nl btw but youre ms_ work'ed thou
only missing a radio
Can;t you just use official shipped upgrade for Tmobile NL? it's really new (as for WM2003).
From Wiki: T-Mobile NL; WWE; T-MOB003; 1.42.00; 1.42.119; 1.13.00;
You have even the best (for me) radio 1.13 (newest is 1.15, but I had some doubts about this one).
Link here: http://www.zshare.net/download/22756005f8e7c9/
Consider also upgrading to WM5.
radio error...help? im on the end of my lat
What where and how can you see "radio error"?
Can you see version number next to R letter while booting? if not, use wiki and install one of available radio's update.
1.06.00 eng....
What where and how can you see "radio error"?
Click to expand...
Click to collapse
after 7% of flashing...stops, and some error 120: radio flash problem...
all radios i'we tied didnt work...i found some i think 13 or 9 mb radios(lol) and not 4mb...they did work but cant find them again?!
T-Mobile NL WWE T-MOB003 1.42.00 1.42.115 1.13.00
anyone??
error 114: radio rom update error?!
help pliz
why does BaUpgradeUt recognize my roms but the no id dosent??
ROM version: 1.06.00 ENG
ROM date: 08/05/04
Radio version: 1.00.00
Protocol version: 1337.30
ExtROM version 1.06.117 WWE (anyone know what the WWE means?)
Bluetooth: BT-PPC/PE Version 1.0.0 Build 1900
this is/was my original rom!
Step after step:
1. Error 120 (according to google) means country error - CID lock seems to work, and yout device just seems NOT to be T-Mobile NL; WWE; T-MOB003
2. For error 114 just use wiki and try to go through procedure desctibed there http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade and report results.
3. To load ROM to your device that isn't made for it, just use MaUpgradeUt_noID.ZIP (http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade)
4. "why does BaUpgradeUt recognize my roms but the no id dosent??" - this I really don't uderstand. Both version can read the same rom files if this is what you ask. They just ned to be in the same folder as the exectuable.
1. look i'm not a noob...
2. i cant run the device info on my pda...wont start?!
3. i get the radio error after 7% of flashing
4."why does BaUpgradeUt recognize my roms but the no id dosent??" i can read or? sinply the no id dosent recognize my roms...
5. i even tryed to modify the roms via dos...
help???
1. We'll see ;P
2. You mean GetDeviceData.exe? Have you read http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted Or you mean that device is dead and that's why you cannot start anything? Please, be precise.
3. This we know, but it doesn't bring any new info. We need error codes, anything.
4. "does not recognize rom" - but you mean nk.nbf files, or the device itself?
5. You mean you tried to modify device data in nk.nbf in command line (this is not DOS, btw) using the data you don't have (as I understand from 2)
SO: Please be precise and explain again now, what is the problem, step after step.
1. hehe you got a point there
2. yes i have red everithing! i can start cab-s...can run the unlock progi...but the device info not(and some other progs)...i can upload any ms-s!!!thats interesting!
3. i only get the 114 error 4 the rom...after 7%...so it starts...(on the pda is only the bootloader text) and no % are counted...my ges is that it only tests the rom...?! for the nk...after a while at 0% ist spits an error: canot upload ce flash rom...and so on...an the standard "do it again" message...(big help)
4. when i uload wit the no id another ms...i can see my ce flash vers...an the ms i want to upload...after that i have the ce flash and the ms...so that works fine?!
5. yes but i didnt say its dos...i sayd in the dos and not cmp im studiing computer sience thatfor i'm not a nob...and the answer is yes i tryed to modify the device info, language and operator...but had no sucses...atlest i dont know if i hited the ride info...canot upload over the maupdate...and the no id doesent recognise the roms(hehe now thats funny isn it?) =)
edit: a big sry on my english...its realy not my 1. language...my 2nd 2 its my 3rd...and i was typing damn quick...so sry 4 the problems...and a big tnx 4 the interest in solving my problem(didnt thank you 4 that)
poland mda iii rom anyone?
Still trying to understand what you wrote in the #18th post [approaching to end of point 2 ]
In the meanwhile link to polish rom you have... in post #3.
I've tried to download the ROM, but HTC tell me this "Sorry, this software download is not suitable for your device".
Maybe my device s/n number is not correct.
Maybe someone who has the correct s/n could download this ROM~
Just tell you guys the news~
http://www.htc.com/europe/SupportDownload.aspx?p_id=174&cat=2&dl_id=537
Caxio's and frednd's DownLoad Link--(I wanna say THANK YOU VERY MUCH!)
See page3 #21 & #23
Filename is :
HTC Touch 3G_MR2009_RUU_Jade_HTC_Europe_2.32.401.2_Radio_Sign_12.41.30.16_0.41.30.12_Ship
edit:
on booting the last red line (after radio and protocol) now says :
D 2.32.44800
Date (which shows after first boot) after screen calibration is now set to 25/03/09
(in settings / about) Build : 5.2.20771 (20771.1.4.6)
(in settings / device info) : rom version 2.32.401.2(44800)
ON customization after first boot if scaned for wifi networks and poped up a message about available networks
Ht845kh14923 :d
o2p63 said:
Ht845kh14923 :d
Click to expand...
Click to collapse
This is for italian version.
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
It seems HardSPL 1.40oli and this 2.32 rom don't work very well.Very sluggish and phone can't turn ON even after 2 Hard resets.
What is your experience???
Do not install if hard spl
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Could anyone check, if the gps-support has been improved?
km
lexx2009 said:
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Click to expand...
Click to collapse
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
update : Jade is fine now. New SPL is 2.32.0000 . More testing to be done.
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
lagoskon said:
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
Click to expand...
Click to collapse
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Myster said:
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Click to expand...
Click to collapse
This is on the Hard-SPL page along with the Oli version
http://forum.xda-developers.com/attachment.php?attachmentid=166262&d=1236988725
GPS seems to work fine now, also the scroll behavior of opera is better
km
It is annoying that hardspl doesnt work with this upgrade of jade.. can't built a rom now with the new oem. It's all newer than the iolite versions, but still doesnt include Footprint
Any changes in Manila? New tabs? Calendar? Stocks? Changes in the contacts?
Hi
What is the Radio version in this new ROM?
I have just applied the version from here and if this contains the old Radio then I can hold off for now until hopefully a compliant Hard-SPL is made, I can live without Opera being perfect.
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
nereus114 said:
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
Click to expand...
Click to collapse
Install a different rom from this forum-> Shut down your jade, unplug it. Hold down "volume down button" and ""power on button" to get in to boot mode. now start to flash another rom.
when finished you can install stock spl and then install this new rom
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
jarel said:
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
Click to expand...
Click to collapse
that's right.. but i think it's in one of the drivers. using the old drivers and the new oem/sys makes it possible to run it with the current hardspl.
radio in this rom 0.41.30.12
no changes in manilla tabs, don't know what changed but it's newer
Hi all,
My first time being a productive member of this great forum (or at least, I hope so ).
I've been wanting to flash the ROM on my Touch HD with Orange UK (something I've never done before), but as an "insurance policy", wanted to have a backup of the stock ROM in case I have he need to restore it, or need to send back the phone to Orange for some reason. After searching the Internet at large and this forum in particular, I was unable to find a dump of the same ROM version as the one I have (1.19.61.1) with Orange UK, so after an hour or more of searching and reading, I was finally able to follow the steps to extract the ROM from memory in .raw format and then reassemble it as an .nbh file using the itsutils tools and the Blackstone "Kitchen" tools. The reference ROM I used for the reconstruction process was this one (found through the forums):
RUU_BlackStone_HKCSL_WWE_1.19.831.0_Radio_52.49a.2 5.26_1.09.25.14_Ship.exe
Here are the complete details regarding the ROM I'm posting, from the Device Information program of my phone:
Operator version: 34.119.1.611
ROM version: 1.19.61.1 WWE
ROM date: 11/25/08
Radio version: 1.09.25.14
Protocol version: 52.49a.25.26U
The process seems to have gone smoothly, and I have ended up with ruu_signed.nbh file, which I have uploaded for you all on Rapidshare and Mediafire.
However, I have not actually flashed my device with this ROM (since this is the current ROM on my device, and having no actual experience in flashing yet, the result might seem a bit ambigious to me) I would really appreciate it if someone would verify whether it actually works or not, so people don't heap curses on me if it doesn't... I'm just a newbie, remember.
So without further ado:
http://rapidshare.com/files/228874929/Touch_HD_Orange_UK_1.19.61.1_WWE.rar
Mediafire:
http://www.mediafire.com/?sharekey=eb6c7c685fb1912708f8df73f2072ed6e04e75f6e8ebb871
This is exactly what i need! Hope its working for the both of us!
original spl
hi i might need to use your dumped rom - i will probably also need to reinstall my original spl (have used a hspl to flash cooked rom) - i noted down my original rom and radio, but not the spl - can you tell me what was the original spl with this rom?
thanx
protoism said:
hi i might need to use your dumped rom - i will probably also need to reinstall my original spl (have used a hspl to flash cooked rom) - i noted down my original rom and radio, but not the spl - can you tell me what was the original spl with this rom?
thanx
Click to expand...
Click to collapse
Orginal SPL 1.14.000
MrKaon said:
Orginal SPL 1.14.000
Click to expand...
Click to collapse
thx
hate to be a complete dweeb, but how do i flash this dumped ROM - its just a nbl file how how do i couple it with a rom update utility??
Guys, check this out. I hope, it will be usefull for you.
Blackstone_Orange_UK_1.14.405.3
11.Nov.08
http://rapidshare.com/files/16237350...Ship.part1.rar
http://rapidshare.com/files/16237926...Ship.part2.rar
http://rapidshare.com/files/16238323...Ship.part3.rar
P.S. it was found in this site.
http://forum.xda-developers.com/showthread.php?t=444170