can a cngular rom be installed on a unlocked mda II g3 - 8125, K-JAM, P4300, MDA Vario Software Upgrading

water damaged my 8125 and got an unlocked MDA G3 have successfully hit it with every rom posted on here. hands down no issues but I was only able to use my data once on custom RUU_1050 love. It had no tmobile features but i want to be on crossbow. I can load any rom no problem but my cingular data will not
work. Every ROM that has been posted works so much respect to all the vets on
here and I have hit my phone sideways it never bricked once. I just need a way to go with my connect i can load any ROM but they all have Tmobile features in them somewhere. Don't mind the t-mobile stuff just need my Cingular data to connect.
I'm stuck

i think that your asking for the settings for cingular us?
it may be in this link somewhere
ftp://ftp.xda-developers.com/

Cingular Data settings
Are also available on their website in the support section. It contains a picture tutorial on how to enter them.
You could also flash a cingular rom and then save off the EXT-Rom and manually add the cabs back in after flashing to the rom you wish to end up on.

Problem solved
2 weeks before i asked for help
Answer when in doubt ask your manufacture for thier gprs settings
Configuring the connection settings to bypass the Cingular proxy on the Cingular 8125
SUBJECT:
Configuring the connection settings to bypass the Cingular proxy on the Cingular 8125
Verifying Connection Settings on the Cingular 8125 for Device Based Email
Setting the browser and APN settings on the Cingular 8125
Setting the browser settings on the Cingular 8125
Setting the APN on the Cingular 8125
FACT:
Windows Mobile 5.0
Cingular 8125
SYMPTOM:
E-mail
FIX:
IMPORTANT:
Additional features such as Wi-Fi and device based e-mail along with other 3rd party applications may not be compatible with the proxy settings associated with the MEdia Net profile.
If there are connection issues with e-mail and/or Wi-Fi, configuring and using the My ISP profile as displayed below may resolve connectivity issues.
Configuring the Cingular 8125 to use My ISP will disable MEdia Net (WAP) web pages when My ISP is used for connectivity. However, regular Internet (HTML) web page browsing will function as normal.
Configuring the Cingular 8125 to bypass the Cingular proxy server:
From the "Start" menu select Settings.
Tap the Connections tab, select the Connections icon.
Select the Advanced Tab.
Tap Select Networks.
Select My ISP from the dropdown and tap Edit.
With Cingular GPRS selected tap Edit.
Verify the following setting and press Next:
Enter a name for the connection: Cingular GPRS
Select a modem:Cellular Line (GPRS)
In the "Access point name" field enter wap.cingular and select Next.
Verify the following profile settings then tap Advanced:
Username: [email protected]
Password: CINGULAR1
Domain: Blank
Verify the following settings and tap ok:
Use server assigned IP address: Selected
Use specific IP address: Unselected
Use software compression: Unchecked
Use IP header compression: Checked
Tap Finish.
Tap Ok.
Attempt an internet connection.
If problem persists, please contact Cingular Customer Care.
NOTE:
APN: Access Point Name
If you are viewing information on devices or services, please note: content reflects instructions for devices and services purchased from Cingular.
Some differences may exist for devices not purchased from Cingular.
https://supportcingular.atgnow.com/...+Setting+the+APN+on+the+Cingular+8125#Goto114

Related

Help with Internet Connection

Hi all,
i have had my Alpine opened from o2 and its now on Tmobile. I am trying to connect to the net via wap or gprs yet it tries to connect then tells me the following
The answering modem has disconnected. To check your connection settings and chenge them if needed, tap settings.
Ive no idea what im doing
Any help in plain English please.
Thank You so much
Hi Cheryl, XDA-IIi (Alpine) is an O2 device and the default setting for everything would be on O2 network, if you are using T-Mobile on that then you need to create the settings of GPRS & Wap from T-mobile, I have attached the CAB file for UK-T-mobile just put in your device and run, but try to delete the previous connection settings of O2 if you haven't got any plans to use them in the future.
By the way have you solved your TomTom hanging/stucking problem yet?
http://forum.xda-developers.com/showthread.php?t=286020
GoodLuck
Sidd
Thank you Sid
Sid
You are so helpfull, thank you for your help.
One last question and i will stop bothering you. I have followed your screen prompts and deleted all connections, where to i place the new tmobile file, memorycard or in another file
Once again thank you
Cheryl
Just put anywhere on the device and click to run, once it finish installing it will dissappear itself.
GoodLuck
Sidd
im thick i know
Sorry Sid,
Maybe im too thick to own one of these, its attack of the blonde i think.
I sent the file to my XDA and put it in My Documents, i then came to open it and got the following
"The file \My Documents\UK_T-Mobile.CAB is not a valid windows CE Setup file"
Any ideas
Sorry to be a pain
Cheryl
T-Mobile GPRS setup
This is how I setup my US t-mobile GPRS connection on my device.
- Start Menu/Settings/Connections Tab/Connections icon.
- Select Add a new modem connection.
- Enter the name (e.g tmobile)
- Select "cellular Line (GPRS) as modem
- Click on next and enter "wap.voicestream.com" for access point name.
- Click on next and leave username/password/domain blank.
- Click on finish. (The advanced setting should be set to user server-assign IP and DNS.
Good lucks.
Cheryl dont worry and dont think that you can not handle this device its one of the nicest device ever merketed and you can play with this device allot accept you can not install Windows 2005 in this, such a pitty.
Ok try these settings step by step, please dont be hurry, be calm and try them. Let me know (by-the-way have a look on my XDA-IIi)
**************************************
Go to: Start>Settings>Connections tab
Select: Connections
Select: Advance tab
Select: Select Networks button
Select New... button under the first dropdown
On the General tab
Name: T-Mobile WAP (or whatever you want to call it)
On the Modem tab
Select: New... button
Connection Name: WAP
Modem: Cellular Line (GPRS)
Select: Next button
Access Point Name: wap.voicestream.com
Select: Next button
Select: Finish button
Be sure to reselect your previously working GRPS connects in both the dropdowns if they are changed to the new WAP ones. The new ones will only be used by your MMS application.
Select: OK and close the settings
Next we setup the MMS Application to use the new WAP connection we just created.
Select: Start>Messaging
Select: Tools menu at the bottom of the screen
Select: MMS Settings...
On the Preferences tab
Connect via: T-Mobile WAP (or whatever you called it in the previous setup)
On the Servers tab
Select: New button
Server Name: T-Mobile USA
Gateway: 216.155.165.50
Port Number: 9201
Server address: http://216.155.174.84/servlets/mms
Size: 250k (you might set this smaller)
Select: OK
Select the T-Mobile USA entry and set is as default by pressing the Set As Default button
Select: OK
********************************************************
GoodLuck
Sidd

t-mobile (us) gprs on kaiser tytn II

received my tytn ii today and phone features and sms work fine on the t-mobile network but unable to setup the internet. anyone have gprs working on t-mobile in the US? I have full internet package and have tried all the settings for the servers etc... Going nuts! Is this just something that doesnt work?
No reason for it not to work...all my phones work down on Tmo no prob...Go to howardforums into the Tmo section and grab the correct GPRS settings..try the wap.voicestream.com APN. Also, what data package are you on?
this is what I have and it is working:
Name for the connection:
T-Mobile Data
Select a modem:
Cellular Line (GPRS, 3G) greyed out
Access point name:
wap.voicestream.com
user name, password, domain: all blank
Advanced: check the box-Use server-assigned IP address
Hit finish
griffin911 said:
this is what I have and it is working:
Name for the connection:
T-Mobile Data
Select a modem:
Cellular Line (GPRS, 3G) greyed out
Access point name:
wap.voicestream.com
user name, password, domain: all blank
Advanced: check the box-Use server-assigned IP address
Hit finish
Click to expand...
Click to collapse
That's what I use...
US (T-Mobile) GPRS and Blackberry WORKING on HTC Touch !
Sorry if this isn't quite the correct forum, but the common question seems to be how to get data (GPRS) set up on HTC Touch/ELF and T-Mobile (US carriers).
A variety of posts on your site led me to these 2 steps (in order) which got my Blackberry connection up and running (complete with PIN and IP address with which you can access T-Mobile web site's BIS set up and change your device and send sevice books etc.
1. download the file JUVS_HTC_Network_Wizard_KAISER_1_0_29981_1.cab from the XDA forums
2. load it onto your HTC device and install (preferably on expansion card)
3. reset device as directed and then run new version of Network Wizard
4. this will allow you to select carriers in the US and T-Mobile
5. once selected, device will have GPRS enabled for T-Mobile
You could stop here and simply enjoy GPRS internet access on demand, but if you need Blackberry service then,
6. download the file BBConnect_WM6_Pro.cab (it is only 3.02MB and the version is 4.0.0.84) from the forums
7. load and install this onto your HTC device (again, the expansion card is best)
8. run the BB setup program from the Settings/System folder tabs
9. cross your fingers (the newer version of the BBConnect program did not work, nor did installing prior to installing US Network Wizard and securing GPRS service)
10. if successful, then you should be able to see the PIN, IMEI, and IP address on the Identity tab of the Blackberry Connect program
Now, assuming you have existing Blackberry account, then go to T-Mobile web site BIS section and "change device" by entering the new PIN and IMEI. It should indicate that you were successful. Then you can send the service books to you HTC Touch which now thinks it is a Blackberry
works now...dunno if tmo was down for while or what but worked when i got home and works everywhere now and is quite fast. thanks all!

Can't get T-MobileWeb to work on Unlocked Tilt on T-Mobile

Did anyone successfully get T-MobileWeb to work on the Tilt to get internet access? I am able to send/receive email but cannot get PIE to connect tot he internet. I've setup the usual T-Mo proxy setting but is there another proxy in PIE somewhere? Is it an issue with PIE connecting through a WAP port?
Thanks.
__________________
I think therefore I am.... confused!!!
you need to search forums for tilt tmobile, thats what i had to do..how are your MMS working out... i cant get mine to work after i changed my proxy to get the $5.99 hack... i am thinking i might have to get the data plan.. let me know if you get it working...
these are the settings i am using;
Under Modem,Edit, needs to be wap.voicestream.com
under Proxy the setting needs to be, see below;
This network connects to internet, network uses a proxy server to connect, box need to be checked.. 216.155.165.50, then under advance
216.155.165.50 port:8080
216.155.165.50 port:1901
216.155.165.50 port:1901 or 03 worked for me
sockets, need to be blank
guys, i was able to get both working, however, not on the stock at&t tilt rom. first to get the mms working, i just went to settings-connections-connection setup, and let it setup ur settings for tmobile usa. this will not allow your mms to work. now go to the connections and modify the settings for the 5.99 plan (i posted the exact settings a while back, search for it).. all u pretty much gotta do is add the proxy. good luck
omar
ps..if ur using the tilt rom, i never got the mms working, and wasnt able to access the internet on the 5.99 plan. on the 19.99 plan worked fine tho
omaralt said:
guys, i was able to get both working, however, not on the stock at&t tilt rom. first to get the mms working, i just went to settings-connections-connection setup, and let it setup ur settings for tmobile usa. this will not allow your mms to work. now go to the connections and modify the settings for the 5.99 plan (i posted the exact settings a while back, search for it).. all u pretty much gotta do is add the proxy. good luck
omar
ps..if ur using the tilt rom, i never got the mms working, and wasnt able to access the internet on the 5.99 plan. on the 19.99 plan worked fine tho
Click to expand...
Click to collapse
Here's the setting:
5.99
start
settings
connections
connections
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :216.155.165.50
click advanced
http: 216.155.165.50:8080
wap: 216.155.165.50:9201
secure wap: 216.155.165.50:9201
socks (blank)
under modem, your access point name should be : wap.voicestream.com
name and password blank.
under advanced check use server assigned ip address
use software compression
use ip header compression.
T-Mobile Total Internet
The only differences is instead of wap.voicestream.com, its:
internet2.voicestream.com or internet3.voicestream.com
And instead of ports 9201 its 9203.
i did try those settings...(that is what they are set to now) my internet has no problems, but my MMS does not... so i cant understand the prob!
I've tried all the settings provided by we3zy but still can't get it to work. In PIE, it kept on saying "opening..." and then came back with the following error:
Error 502 - Bad Request
The server could not resolve your request for url: /
Any thoughts?
- Thanks.
OK, got it to work with accessing internet and email by adding a modem setting. However, I have to switch the two connections depending on which function I need.
Under Setting, Connections, Advanced button, Select Networks...I need to do the following:
In the Network Management screen I have a few choices but only the two settings in the top choice (Programs that automatically connect to the internet should connect using: ) need switching. When I click on to select the choices, I have setup one for accessing the internet and another to get email.
Is this normal or am I the only one that have this issue? Its kind of annoying to keep on switching the setting for the functions. Any way to combine the two connections or have the device auto choose and connect automatically?
we3zy said:
Here's the setting:
5.99
start
settings
connections
connections
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :216.155.165.50
click advanced
http: 216.155.165.50:8080
wap: 216.155.165.50:9201
secure wap: 216.155.165.50:9201
socks (blank)
under modem, your access point name should be : wap.voicestream.com
name and password blank.
under advanced check use server assigned ip address
use software compression
use ip header compression.
T-Mobile Total Internet
The only differences is instead of wap.voicestream.com, its:
internet2.voicestream.com or internet3.voicestream.com
And instead of ports 9201 its 9203.
Click to expand...
Click to collapse
I used the 5.99 setting and this is exactly what my explorer's (PIE, Opera and email also says cant connect using this connection say.
"Error: Requested content 'www.google.com/m' cannot be accessed. You do not have access to the site. "
moddin said:
I used the 5.99 setting and this is exactly what my explorer's (PIE, Opera and email also says cant connect using this connection say.
"Error: Requested content 'www.google.com/m' cannot be accessed. You do not have access to the site. "
Click to expand...
Click to collapse
I really can't explain why your getting that problem. But visit www.yahoo.com and then visit google.com again. I had that problem on the iphone, don't know why.
Make sure you've checked:
use software compression
use ip header compression.
and all ports are 9201
the settings above worked to get ny internet browser up i am currently on google with the original at&t rom now im gonna check my emails and weather plug ins
we3zy said:
I really can't explain why your getting that problem. But visit www.yahoo.com and then visit google.com again. I had that problem on the iphone, don't know why.
Make sure you've checked:
use software compression
use ip header compression.
and all ports are 9201
Click to expand...
Click to collapse
They are all checked. I changed all ports to 9201 even the http and now when i open pie it says
"You do not have access rights to this site
URL=www.google.com/
Status=20(hex)"
Also it adds "wsp://" in front of any link i type in the browser. Maybe you didnt mean change the http port to 9201 but i gave it a shot. are you guys and XXwindowsXX using the 5.99 deal? and it works?
email routing issue + cannot download TM's w/ pics
Hi All ~~
It sounds like I may have found the right msg board! I am a T-Mobile customer using an unlocked AT&T phone with the original ROM (minus the bloatware). I currently have three msging accounts on the Tilt: text msging, a hotmail account and a work email account (which I check via Outlook on my PC). I am having two annoying problems:
(1) I keep getting TMs saying that I have received an email on my work account; however I cannot (a) get the text msg notifications to turn off, nor (b) get the emails to actually pull down into the account. So: I know I have a work email (even who from), but cannot read it. Any thoughts on how to resolve either or both of these issues?
(2) I cannot receive or send pic text msgs. Really annoying; I am curious to see how other T-Mobile Tilt users have their settings arranged for this.
Thank you in advance for any assistance you can provide ~~ Kim
TYTN/Hermes settings?
These settings in post four, would they be the same for the HTC TYTN/Hermes as well? After going into cnections, I notice that there isn't anything called connection settings. Just add new modem conection, proxy settings etc. I'd really like to be able to get this T-Zones up and running on my Hermes as well.
Thanks,
Cristobal
Cristobalm said:
These settings in post four, would they be the same for the HTC TYTN/Hermes as well? After going into cnections, I notice that there isn't anything called connection settings. Just add new modem conection, proxy settings etc. I'd really like to be able to get this T-Zones up and running on my Hermes as well.
Thanks,
Cristobal
Click to expand...
Click to collapse
Yes, it should be. You'll need to add a new modem connection and edit the proxy settings. PM me if you can't get it to work and I'll try to help you.
Tilt Solution To Force Http Instead Of Wsp On Tmobile
Our good friends at ATT have two cab files in the \windows folder which install and remove a hidden proxy. By default, it funnels through the proxy.
​ BAD ATT! ​
If you are using T-mobile's 5.99 gprs plan and the HIDDEN proxy is enabled, all traffic will be routed through the hidden proxy and you will be forced to WSP:// pages. This will effectively lock you out of many of the sites that do not support the WSP protocol. Other carriers (Orange?) may be doing this too to drive WSP traffic.
To correct the problem, go to the windows folder and
1. run the restoreHiddenProxy4CWS_0522.cab
2. and then run the removeHiddenProxy4CWS_0522.cab file
3. Close your data connection and restart it. If you don't know how, just press the reset button.
After this is complete install the standard T-mobile GPRS settings and you should be in good shape. If you need a cab for t-mobile, search the board for the most current one or PM me. I keep one handy too.
liquidsilver said:
Our good friends at ATT have two cab files in the \windows folder which install and remove a hidden proxy. By default, it funnels through the proxy.
​ BAD ATT! ​
If you are using T-mobile's 5.99 gprs plan and the HIDDEN proxy is enabled, all traffic will be routed through the hidden proxy and you will be forced to WSP:// pages. This will effectively lock you out of many of the sites that do not support the WSP protocol. Other carriers (Orange?) may be doing this too to drive WSP traffic.
To correct the problem, go to the windows folder and
1. run the restoreHiddenProxy4CWS_0522.cab
2. and then run the removeHiddenProxy4CWS_0522.cab file
3. Close your data connection and restart it. If you don't know how, just press the reset button.
After this is complete install the standard T-mobile GPRS settings and you should be in good shape. If you need a cab for t-mobile, search the board for the most current one or PM me. I keep one handy too.
Click to expand...
Click to collapse
So after doing that, will I be able to browse regular HTML pages (without going through proxies) using the 5.99 plan ?
i have a ty tn II and t-mobile is my carrier and i have the 19.99 internet plan,so i would like to know what are the correct settings for the MMS cause i cant sent picture messages nor recieve them..please help me thanks
tm1125 said:
i have a ty tn II and t-mobile is my carrier and i have the 19.99 internet plan,so i would like to know what are the correct settings for the MMS cause i cant sent picture messages nor recieve them..please help me thanks
Click to expand...
Click to collapse
try this:
server name: call it whatever you want
Gateway: 216.155.165.50
Port: 8080
Server address: http://216.155.174.84/servlets/mms
Connect via: whatever you called the server name
Sending limit: 300k
WAP version: WAP 2.0
make sure you set this MMS server as default
The 5.99 plan requires a proxy. No exceptions that I'm aware of. The good news is that I've not found a page that I cannot browse. The speed isn't stellar, but quite acceptable. Additionally, since the power requirements for GPRS are low, I check email every 10 minutes.
There are a series of CAB files floating around here somewhere that have all the correct settings for each of the Tmo plans.
Same phone also ulocked for T-mobile Final solution
I suggest that you start afresh (Hard reset your phone)
then go to this link and download the cab
http://forum.xda-developers.com/showpost.php?p=1521768&postcount=70
download this cab
tmobyjoe599.cab
I had the same problem as you but that worked for me and im sure it will work for you.
Oh before i forget make sure that you disable automatic wireless configurator, that stuff is crap.
p.s note to be a pain in the ass. Next time search the forum even google will lead you to the answer of your question.

[Solved] Att Tilt won't Sync with e-mail

OK, my 8525 used to do this very well. I just got a tilt and installed several roms and they all did the same thing (duty, ATT org., and DCS) when I setup an email for a yahoo account and try to sync it says it cannot connect under these settings. But they are the default settings for att. I also checked with att and my settings are all correct. I was using the 1.58 radio now I'm starting to use 1.64 to see if that works any better. I don't know if this is a radio issue or whatever but I really need help att support isn't doing anything so I'm turning to you guys. (btw I've reset everything many many times getting the same error too)
xcom923 said:
OK, my 8525 used to do this very well. I just got a tilt and installed several roms and they all did the same thing (duty, ATT org., and DCS) when I setup an email for a yahoo account and try to sync it says it cannot connect under these settings. But they are the default settings for att. I also checked with att and my settings are all correct. I was using the 1.58 radio now I'm starting to use 1.64 to see if that works any better. I don't know if this is a radio issue or whatever but I really need help att support isn't doing anything so I'm turning to you guys. (btw I've reset everything many many times getting the same error too)
Click to expand...
Click to collapse
Did you not learn anything from your 8525....?
You need to provide more info if you want help.
Start by creating a signature summarizing your device's set up.
Default is not always default....keep this in mind!
I don't know what data plan you have but I'll start with this:
Start > Setting > Connection > Connection > Advanced > Select Networks > In the Drop down box...you probably have Media Net, Try ATT Wap or vice versa.
This all I can do for you because you failed to provide more info. Based on the radios you've tried, I'm assuming you're on WM 6.1. Also, you need to address this issue in the thread of the Rom you're using.
You've said also that this issue repeats on several Roms.....What are you using to configure your Network settings?
Either Network Config or your cab file is not working properly you. You may have to manually input your settings. They are located around here somewhere or google it.
dwny said:
Did you not learn anything from your 8525....?
You need to provide more info if you want help.
Start by creating a signature summarizing your device's set up.
Default is not always default....keep this in mind!
I don't know what data plan you have but I'll start with this:
Start > Setting > Connection > Connection > Advanced > Select Networks > In the Drop down box...you probably have Media Net, Try ATT Wap or vice versa.
This all I can do for you because you failed to provide more info. Based on the radios you've tried, I'm assuming you're on WM 6.1. Also, you need to address this issue in the thread of the Rom you're using.
You've said also that this issue repeats on several Roms.....What are you using to configure your Network settings?
Either Network Config or your cab file is not working properly you. You may have to manually input your settings. They are located around here somewhere or google it.
Click to expand...
Click to collapse
I'm sorry I thought I was providing enough info. I used the network config ROM that was built in to most of the windows 6.1 ROMs but I also used the "default" settings from att. (I ment defauld because that is what att shipps)
But if you want more info here is my network settings
When I first hit "connection settings" I have in bold "MY ISP" and "My Work Network"
if you go to manage "MY ISP" it has the config for att's isp. here are the settings:
Access Point Name: isp.cingular
UserName: [email protected]
Password: CINGULAR1
(also set to use server IP)
_________________________________________________________________
Under the "Advance" tab I have 3 choices for each drop-down menu they are "My ISP" (which is selected for the top "programs automatically connect to the internet"), "MEdia Net", and "My Work Network" (which is selected for "programs that automatically connect to a private network)
the "MEdia Net" settings are as follows (and I have switched between using ISP and MEdia net in the drop down menu for internet and get the same problem)
Access Point Name:wap.cingular
User Name: [email protected]
Password: CINGULAR1
(also set to use server IP)
_________________________________________________________________
I hope that is enough info like I said earlier my roms is currently DCS v1.7 and I'm running radio 1.64 as a side not it doesn't seem like my GPS is working correctly since it hasn't found a lock in 5min. But I think I've found the thread to help me with that. Again I'm having trouble with only syncing my e-mail althouth internet works just fine
I'm in your boat too. I have the same settings but under media net. I read one place to use the username and password you have but ATT says to leave blank and then run some cab file for proxy info. (I didn't do that) So far it has the exact settings you have, my PIE works and everything. Just can't send receive mail.
At this point though, mine just says connecting, and then asks me to verify my username and password, then I get ..
"Messages cannot be downloaded to your movile device. Make sure you are connected and that your email account settings are correct. Then, try to download messages again. "
I've tried 2 different email addresses..
ChumleyEX said:
I'm in your boat too. I have the same settings but under media net. I read one place to use the username and password you have but ATT says to leave blank and then run some cab file for proxy info. (I didn't do that) So far it has the exact settings you have, my PIE works and everything. Just can't send receive mail.
At this point though, mine just says connecting, and then asks me to verify my username and password, then I get ..
"Messages cannot be downloaded to your movile device. Make sure you are connected and that your email account settings are correct. Then, try to download messages again. "
I've tried 2 different email addresses..
Click to expand...
Click to collapse
that's actually the first time I heard something about proxy settings. Where is that cab just in case (I'm willing to try anything)
I didn't use that cab but I did try Cingular PDA MediaNet MMS Settingsv2.cab
it should be attached.
EDIT
I know what solved my problem, paying a past due bill.
Problem Solved
OK, one piece of info that I didn't realize was important was that I am on the unlimited MEdia Net plan (which uses WAP.CINGULAR.COM) and the PDA plan, which is way more expensive uses ISP.CINGULAR.COM apparently I needed to change any network that was WAP and change it to ISP to get my pda to use things that I guess are usually covered in the PDA Data plan.
Thanks for your help everyone and I hope this can be used for someone else as well. long story short.....
media net=wap.cingular
pda plan=isp.cingular

O2 MMS settings on Vario III Needed

i recently got a Vario III from T-mobile its been unlocked to any network and now i have an O2 UK sim card in it. The problem i have is that i can not send any mms messages. I asked O2 to send me the settings. They said they'll have to send by e-mail. 2 settings were send to me one for internet which works fine and the second one was for mms. Unfortunately the second setting was an instruction to click on a button that is only availible on their XDA stellar. I repeatly asked for O2 mms manual settings but they kept sending me the same thing. I resorted to keying my own settings in that i found on the web.
Under mms settings server tab.
Server name: O2UK
Gateway: 193.113.200.195
Port number: 9201
Server address: http://mmsc.mms.o2.co.uk:8002
Connects via: o2 (The internet settings which works fine)
Send limit: 300k
WAP Version: WAP 2.0
Even with these settings i am still unable to send or recieve MMS messages. I suspect the icon button that O2 are asking me to click on is a cab file thats stored on the XDA Stellar maybe this cab file is my solution?
Any help would be welcome.
9 months ago I upgraded from a Mini S to a Trion. The Mini S didn't have the correct settings in it, so I had to install them manually.
However, I never managed to get it completely right. Sure they worked, I could receive and send MMS messages, then I found that it was going over the "wrong" connection and was costing me both messages and data, so do watch out for that one.
On my new Stellar, it does seem to be working with no side effects, although it switches from one thing to another to send MMS messages. I'll try and copy out the data I have on mine. If you need more, do ask...
Start -> Settings -> Connections -> Connections
"My ISP" -> Manage connection
Name "Mobile Web",
Modem Cellular Line (GPRS, 3G)
Access point mobile.o2.co.uk
Username O2web
Password (Think it is "password", see here)
Domain <empty>
-> Advanced
TCP/IP-> Use server assigned IP, rest deselected
Servers -> DNS 193.113.200.200 193.113.200.201
"My Work Connection" -> Manage Connection
Name "O2 Active"
Modem Cellular (GPRS, 3G)
Access point wap.o2.co.uk
Username o2wap
Password (Probably "password" again)
Domain <empty>
-> Advanced
TCP/IP -> As above
Servers -> "Use server assigned addresses"
Start -> Messaging -> Menu -> MMS Options -> Servers
Name "O2 UK"
Gateway 193.113.200.195
Port 8080
Server Address http://mmsc.mms.o2.co.uk:8002
Connect via "My Work Network"
Send Limit 300k
Wap version 2.0
Hopefully all that makes sense if you work through it.
"My ISP" are the internet settings are that I use to browse the web. "My Work Network" appears to be O2's WAP settings and is used to send MMS messages, so it looks like you might need to use it for that.
I'll also have a look and see if I can find the cab you were on about.
I hope that helps.
Please forgive the double post, I expected it to take longer to find.
I honestly don't know what each of these do, but they are all the cabs I found in /windows. I am assuming the smaller ones are the actual configurations themselves and the O2 Custom thing is the application that will install everything else. The "plugin order" cab file makes me wonder if this also has a bunch of today plugins attached to it, but I honestly don't know (I haven't hard reset without installing the extRom and have not used any other WM6 devices).
Does WM6 come with a bunch of today screen plugins for things like running programs etc... ? (ie beyond dat/time, calendar, tasks and messaging). Before this I only used WM5, so I don't know if you're going to get a bunch of extra today plugins tagging along (they aren't *bad*, they're just pointless if you read these forums as you'll no doubt either get better for free or have bought something like Mobile Shell).
Let me know how you get on.
Thanks for your help. I aligned all my settings to the same as yours but made no progress what happens is the message tries to send and is placed in the outbox but never succeeds. So I had a look though the cab files you kindly uploaded, the only file that looked like it maybe the one i need is MP_MMS4.0_O2UK_POSTPAID_Kaiser_070809.cab. So i ran it from my memory card the result was not good. the mms doesn't even go to outbox now. hehe. oh well i could always restore the rom and maybe stick to a t-mobile sim card if a want to send mms. unless you have any other suggestions?
Am i the only person trying to use a Vario III with a O2 sim? Surely there are others but i guess mms messages aren't a function people use that often.
The following page on the O2 website allows you to have the settings sent direct to your phone as an SMS:
http://getsettings.o2.co.uk/ServeSettingsWebApp/
I'm not an O2 user, so don't know if this works or not. Sorry if you've already tried this.
Ninimoe said:
Thanks for your help. I aligned all my settings to the same as yours but made no progress what happens is the message tries to send and is placed in the outbox but never succeeds. So I had a look though the cab files you kindly uploaded, the only file that looked like it maybe the one i need is MP_MMS4.0_O2UK_POSTPAID_Kaiser_070809.cab. So i ran it from my memory card the result was not good. the mms doesn't even go to outbox now. hehe. oh well i could always restore the rom and maybe stick to a t-mobile sim card if a want to send mms. unless you have any other suggestions?
Am i the only person trying to use a Vario III with a O2 sim? Surely there are others but i guess mms messages aren't a function people use that often.
Click to expand...
Click to collapse
Hang on, you on payasyougo? Am fairly sure they have different usernames and passwords, access points etc.....
Try again as above, but with the following change in the relevant section.
"My Work Connection" -> Manage Connection
Name "O2 Active"
Modem Cellular (GPRS, 3G)
Access point payandgo.o2.co.uk
Username payandgo
Password (Probably "password" again)
Domain <empty>
-> Advanced
TCP/IP -> As above
Servers -> "Use server assigned addresses"
The "My ISP" settings will also probably need to be changed, but you said you had that working so I shall assume you know more about that than me.
Cavey.co.uk said:
Hang on, you on payasyougo? Am fairly sure they have different usernames and passwords, access points etc.....
Try again as above, but with the following change in the relevant section.
"My Work Connection" -> Manage Connection
Name "O2 Active"
Modem Cellular (GPRS, 3G)
Access point payandgo.o2.co.uk
Username payandgo
Password (Probably "password" again)
Domain <empty>
-> Advanced
TCP/IP -> As above
Servers -> "Use server assigned addresses"
The "My ISP" settings will also probably need to be changed, but you said you had that working so I shall assume you know more about that than me.
Click to expand...
Click to collapse
On top of this you need to go through a specific proxy as follows:
HTTP: 193.113.200.195 Port 8080
WAP: 193.113.200.195 Port 9201
Secure WAP: 193.113.200.195 Port 9203
Socks: 193.113.200.195 Port 1080
Also a note, I wasn't able to get MMS working untill I Flashed to Dutty's WM 6.1 Hybrid ROM
Audio said:
On top of this you need to go through a specific proxy as follows:
HTTP: 193.113.200.195 Port 8080
WAP: 193.113.200.195 Port 9201
Secure WAP: 193.113.200.195 Port 9203
Socks: 193.113.200.195 Port 1080
Also a note, I wasn't able to get MMS working untill I Flashed to Dutty's WM 6.1 Hybrid ROM
Click to expand...
Click to collapse
Good shout. My phone keeps setting my HTTP and socks proxy to 127.0.0.1 in order to match the desktop computer (stupid, stupid activesync) so I had ignored it. I didn't realise there were more settings in there that could be relevant.
It seems the very important ones are the WAP and secure WAP proxies (which activesync doesn't seem to be configured to break). Mine are set to the values given by Audio.
fisha21 said:
The following page on the O2 website allows you to have the settings sent direct to your phone as an SMS:
http://getsettings.o2.co.uk/ServeSettingsWebApp/
I'm not an O2 user, so don't know if this works or not. Sorry if you've already tried this.
Click to expand...
Click to collapse
Unfortunately O2 can't send mms settings to kaiser and probably not any phone that uses WM6 but it was worth a try. thanks
Cavey: I'm on contract with o2 so the initial settings you gave me should work but doesn't. i've tried keying Audio's proxy settings in too, but still no luck. I also restored the phone to its factory settings then re-keyed all the settings in, the result is still negative.
As you mentioned, O2 are charging for the unsuccessful attemps of sending mms. I have 500 sms but 1 mms = 4 sms. i'm running out fast so i think i'll give it a rest for not until my allowance resets.
Maybe i'll follow in Audio's tracks and install a Dutty rom. only had the Vario III for less than 1 month though and know very little about flashing the rom on this phone.
Cheer's for everyone's help for now.
FINALLY!!!!!
I can send and receive mms on my (unlocked) t-mobile TYTN III using an O2 sim card. All of Cavey's setting were right the only difference is I had my phone flashed by T-mobile from wm6.0 to wm6.1
I was having alot of trouble with the phone as i was no longer a T-mobile customer hence the O2 sim card, they were reluctant to do and repairs for me, but the phone was still under 1 year so definately under their warranty.
For those interested in the problem i was having. All i had to do to cause the phone to crash was do a hard reset via the little hole at the bottom of the screen. The problem then arise.
-only be able to make 1 call before i need to reset again
-screen won't tilt when i slide out keyboard.
-if any event starts the phone vibrating it wouldn't stop vibrating till the battery runs dead
Solutions:
-don't do a hard reset (not always possible) plus the problem can randomly occur.
-hard reset the phone whilst charging
If anyone fall under the circumstance whereby they are no longer under contract with T-mobile, but the phone is still under warranty. Tmobile will have to honor it. Receipts will help you prove this. They'll say things like its impossible to send your phone to repair, because you don't have a t-mobile number for them to setup the repair form, but it can be done. They'll have to assign a PAYG sim (provided by the shop) to the phone. That's basically it.
Anyway after all that i have a new rom and it accepts the mms settings that cavey posted for me. Been such a long time my O2 contract is almost up and I'm looking at new phones.
Thanks to Cavey, Audio and fisha21

Categories

Resources