Hi all,
Moz's RUU_Trinity_Orange_UK_1.23.61.5_1.38.00.11_GSM_NoIPL_NoSPL.exe :-
Links :- MegaUpload | RapidShare | SendSpace
Whilst teaching myself to build/reconstruct/extract Trinity ROM's I have cobbled together the above linked backup of my Orange UK SPV M700 ROM. I have found this very useful to use as a restore image for my device - back to an "official" UK Orange build (or as close as it can be in the absence of an official UK Orange ROM release!)
This RUU was made using a ripped backup of my M700 at v1.23.61.5 and a reconstruction of the Ext_ROM from the same unit. The RUU is only made possible thanks to the tools found here on XDA-Developers. (Many thanks go to AnDim for Ext-ROM Image Editor, Olipro for Custom RUU Updater and Des for SoftSPL.) The included Radio ROM is the GSM enabled v1.38.00.11 (ripped straight from the last official HTC shipped ROM upgrade) and the enclosed Orange splash screens were reconstructed from .bmp's - again pulled from this site (thanks to Sammis!)
There is NO IPL or SPL included in this build so the same IPL/SPL that are currently on your device will be preserved. The CustomRUU will initially load the SoftSPL and may ask you to acknowledge installation of the SSPL modified Bootloader on your device before flashing begins.
The linked .exe is a self-extracting WinRAR archive which will auto-launch the RUU. You simply need to connect your Trinity to the USB and get to the point of a Guest ActiveSync partnership before launching the RUU! If the Tinity disconnects from USB initially within the Bootloader, just re-launch the RUU software again at that point and the ROM will flash correctly from then. I have tested this software many times and it has always worked for me! (No guarrantees given or implied tho!! )
I hope someone finds this useful! Enjoy!!
Kind regards, Moz.
Nice one, you did a more complete job than me .. I only dumped the OS part of the phone
Good work that man.... been hoping for one of these, now can flash my M700 and see what all the fuss is about ;-)
Thanks,
Been waiting for this for warranty purposes
Does GPS enabled with this ROM?
The included Radio ROM is the GSM enabled v1.38.00.11 (ripped straight from the last official HTC shipped ROM upgrade)
Click to expand...
Click to collapse
GPS radio Rom!
Anyone tried this yet?
Is it an official UK rom?
Will it fool Orange customer services?
It is THE Orange ROM
He took it from his M700 before applying LVSW (I think he used that one).
Orange aint got a ROM out there for us
As for fooling Orange Custard Services...... that really isnt hard... ask them what day it is and that usually works..........
Mozzerr said:
Hi all,
Moz's RUU_Trinity_Orange_UK_1.23.61.5_1.38.00.11_GSM_NoIPL_NoSPL.exe :-
http://www.megaupload.com/?d=52MXMAMG
Whilst teaching myself to build/reconstruct/extract Trinity ROM's I have cobbled together the above linked backup of my Orange UK SPV M700 ROM. I have found this very useful to use as a restore image for my device - back to an "official" UK Orange build (or as close as it can be in the absence of an official UK Orange ROM release!)
This RUU was made using a ripped backup of my M700 at v1.23.61.5 and a reconstruction of the Ext_ROM from the same unit. The RUU is only made possible thanks to the tools found here on XDA-Developers. (Many thanks go to AnDim for Ext-ROM Image Editor, Olipro for Custom RUU Updater and Des for SoftSPL.) The included Radio ROM is the GSM enabled v1.38.00.11 (ripped straight from the last official HTC shipped ROM upgrade) and the enclosed Orange splash screens were reconstructed from .bmp's - again pulled from this site (thanks to Sammis!)
There is NO IPL or SPL included in this build so the same IPL/SPL that are currently on your device will be preserved. The CustomRUU will initially load the SoftSPL and may ask you to acknowledge installation of the SSPL modified Bootloader on your device before flashing begins.
The linked .exe is a self-extracting WinRAR archive which will auto-launch the RUU. You simply need to connect your Trinity to the USB and get to the point of a Guest ActiveSync partnership before launching the RUU! If the Tinity disconnects from USB initially within the Bootloader, just re-launch the RUU software again at that point and the ROM will flash correctly from then. I have tested this software many times and it has always worked for me! (No guarrantees given or implied tho!! )
I hope someone finds this useful! Enjoy!!
Kind regards, Moz.
Click to expand...
Click to collapse
hi there iv tried registering to megaupload to download the file but having problems getting it,,can u post me the file please.the problem im getting with my phone is the GPS isnt working which is wht i need the orginal uk rom for the spv m700 (trinity 100/htc p3300) once again i need the uk original rom including GPS please thanx.please email me at [email protected] cheers
It works
This works very well.Earlier I flashed my m700 ROM to do network unlock and lost GPS service after that. But this restored it. Great. Thanks for all your work.
saiuk said:
hi there iv tried registering to megaupload to download the file but having problems getting it,,can u post me the file please. cheers
Click to expand...
Click to collapse
Hi,
You don't need to register with megaupload to get the file... The whole point of using a free hosting site like that is to avoid having to email such large files all over the place... Besides, I doubt your email provider will allow this size of file as an attachment...
So, I'm afraid the answer is "No" I cannot email this ROM to you.
Either sort yourself out with megaupload or let me know some other free hosting site that you *can* use and I will upload it there for you!
Regs, Moz.
Dynamite555 said:
This works very well.Earlier I flashed my m700 ROM to do network unlock and lost GPS service after that. But this restored it. Great. Thanks for all your work.
Click to expand...
Click to collapse
Hi,
Thanks for confirming the validity of my ROM!
I'm pleased that it helped you out.
I'm now working on a cleaned, fast, minimal installed software version of WM5, based on my own sifting of all the best versions of certain useful apps. Until we see the official Dopod version of WM6, I think a slim/sleek version of WM5 is the best possible utilisation of this handset!
Rgds, Moz.
Just a quick word to say I flashed your rom after having tested a few WM6 roms, and it works fine. As far as I can tell, it looks just like the original orange phone. Thanks.
Wicked Your A Star
Mozzerr said:
Hi all,
Moz's RUU_Trinity_Orange_UK_1.23.61.5_1.38.00.11_GSM_NoIPL_NoSPL.exe :-
http://www.megaupload.com/?d=52MXMAMG
Whilst teaching myself to build/reconstruct/extract Trinity ROM's I have cobbled together the above linked backup of my Orange UK SPV M700 ROM. I have found this very useful to use as a restore image for my device - back to an "official" UK Orange build (or as close as it can be in the absence of an official UK Orange ROM release!)
This RUU was made using a ripped backup of my M700 at v1.23.61.5 and a reconstruction of the Ext_ROM from the same unit. The RUU is only made possible thanks to the tools found here on XDA-Developers. (Many thanks go to AnDim for Ext-ROM Image Editor, Olipro for Custom RUU Updater and Des for SoftSPL.) The included Radio ROM is the GSM enabled v1.38.00.11 (ripped straight from the last official HTC shipped ROM upgrade) and the enclosed Orange splash screens were reconstructed from .bmp's - again pulled from this site (thanks to Sammis!)
There is NO IPL or SPL included in this build so the same IPL/SPL that are currently on your device will be preserved. The CustomRUU will initially load the SoftSPL and may ask you to acknowledge installation of the SSPL modified Bootloader on your device before flashing begins.
The linked .exe is a self-extracting WinRAR archive which will auto-launch the RUU. You simply need to connect your Trinity to the USB and get to the point of a Guest ActiveSync partnership before launching the RUU! If the Tinity disconnects from USB initially within the Bootloader, just re-launch the RUU software again at that point and the ROM will flash correctly from then. I have tested this software many times and it has always worked for me! (No guarrantees given or implied tho!! )
I hope someone finds this useful! Enjoy!!
Kind regards, Moz.
Click to expand...
Click to collapse
HEY NICE ONE MATE...I FINALLY MANAGED TO DOWNLOAD THIS FILE IT WORKS LIKE A TREAT ,,,GPS IS WORKING FINE AND WIFI BLUETOOTH ETC..ALSO MY PHONE IS STILL UNLOCKED,.,.,,I WAS WONDERING HOW TO SET THE GPRS SETTINGS PAY AS GO FOR UK VODAFONE PLEASE CAN U HELP OUT IV SEEN ON HTC'S WEB SITE THEY GOT A TOOL FOR ALL NETWORKS IN TH EUK FOR CONTRACT SETTINGS BUT THERE ISNT ONE FOR PAY AS GO CAN U HELP OUT THANX U BEEN A STAR THO I SO OVER THE MOON MY PHONE IS WORKING NOW THANX
Mozzerr said:
Hi all,
Moz's RUU_Trinity_Orange_UK_1.23.61.5_1.38.00.11_GSM_NoIPL_NoSPL.exe :-
http://www.megaupload.com/?d=52MXMAMG
Whilst teaching myself to build/reconstruct/extract Trinity ROM's I have cobbled together the above linked backup of my Orange UK SPV M700 ROM. I have found this very useful to use as a restore image for my device - back to an "official" UK Orange build (or as close as it can be in the absence of an official UK Orange ROM release!)
This RUU was made using a ripped backup of my M700 at v1.23.61.5 and a reconstruction of the Ext_ROM from the same unit. The RUU is only made possible thanks to the tools found here on XDA-Developers. (Many thanks go to AnDim for Ext-ROM Image Editor, Olipro for Custom RUU Updater and Des for SoftSPL.) The included Radio ROM is the GSM enabled v1.38.00.11 (ripped straight from the last official HTC shipped ROM upgrade) and the enclosed Orange splash screens were reconstructed from .bmp's - again pulled from this site (thanks to Sammis!)
There is NO IPL or SPL included in this build so the same IPL/SPL that are currently on your device will be preserved. The CustomRUU will initially load the SoftSPL and may ask you to acknowledge installation of the SSPL modified Bootloader on your device before flashing begins.
The linked .exe is a self-extracting WinRAR archive which will auto-launch the RUU. You simply need to connect your Trinity to the USB and get to the point of a Guest ActiveSync partnership before launching the RUU! If the Tinity disconnects from USB initially within the Bootloader, just re-launch the RUU software again at that point and the ROM will flash correctly from then. I have tested this software many times and it has always worked for me! (No guarrantees given or implied tho!! )
I hope someone finds this useful! Enjoy!!
Kind regards, Moz.
Click to expand...
Click to collapse
How about listing it here:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
just a case of keeping the page complete - especially for noobies
SPB Backup
Great peice of work!!
At last, a fallback in case all that WM6 experimenting goes wrong.
This is what Orange should ahave had out a long time ago.
Anyone out there treid SPB backup to restore a ROM after flashinging it??
I've flashed back this ROM after using Muns WM6 rom and used Sprite Backup to restore to my original point. All seemed to go fine bar a few little tweaks.
Not sure if thats what you meant. I havent used SPB backup before but i'd expect it to be the same.
Nogs
I was just wondering: How would you restore the original ipl/spl?
TRIN100
IPL - 0.50
TRIN100
SPL - 1.07.0000
Is it possible to extract the orange settings from this rom for internet access?
iamwhoiam said:
I was just wondering: How would you restore the original ipl/spl?
TRIN100
IPL - 0.50
TRIN100
SPL - 1.07.0000
Click to expand...
Click to collapse
Hi,
The absolute original IPL & SPL are not available because Orange UK have not released any M700 ROM's for us to extract them from.
(IPL & SPL *cannot* be extracted from your device!)
That is why I made sure to release my ROM without *any* IPL or SPL inside - thus leaving intact what you already have.
The majority of ROM's available on here do not necessarily include any IPL or SPL so chances are you still have your originals intact anyway!
If not, your only option is to take one of the official HTC or DOPOD ROM's and extract the IPL & SPL from that, compare and hope that the version is the same as what you had originally, then flash to your device in the usual way.
Whenever I download any ROM, I *always* check to see if it includes any IPL & SPL and remove them (there is little to zero point in upgrading them anyway) and that way I always know that I can go back to the abolute factory default of my own phone by simply reflashing with my own backup ROM (ie. the one I have made available here!!)
Rgds,
Moz.
Related
ok...i got the error from upgrading from 2.17 hacked rom to the 2.26 official rom. tried to read whatever i can but looks like solutions were given for cingular ipl etc...
can someone help me out? when i run the official rom, it updates to 1% and then i get the nbf error. i tried to run loki but mda not recognized by my usb connection.
stuck now...please help!!!
actually, tried to run machinagod's RAPI unlocker..but MDA not recognized as connected...this was part of xelencin's 2.24 rom updater.
please help!!!
Hi,
you must provide more information if you want someone to help you.
First and most important: what does it mean your phone is stuck? Stuck where? Does the screen come on? Can you get the bootloader screen? (for the bootloader screen: hold the two keys on the right side of the device and press shortly the reset hole; if you see the three colors screen then you have the bootloader!)
bye
i get the screen with the 3 colors, and usb at bottom left. when i run the official t-mobile 2.26 update, the screen goes gray and there is a bar with % done. when that kicks in, i get 1% done then it stops. on my computer screen, i get the nbk error, saying the nbk file that i have is not for my phone.
i looked for fixes but all the fixes require activesync connections which i am unable to connect with. just fyi, when i plug in the usb cable to my laptop, i hear the *ding* for usb noting it is connected but the activesync connection is not available.
thanks in advance for your help.
-mike
m3m3 said:
i get the screen with the 3 colors, and usb at bottom left. when i run the official t-mobile 2.26 update, the screen goes gray and there is a bar with % done. when that kicks in, i get 1% done then it stops. on my computer screen, i get the nbk error, saying the nbk file that i have is not for my phone.
i looked for fixes but all the fixes require activesync connections which i am unable to connect with. just fyi, when i plug in the usb cable to my laptop, i hear the *ding* for usb noting it is connected but the activesync connection is not available.
thanks in advance for your help.
-mike
Click to expand...
Click to collapse
Before your battery goes flat i suggest you to re-install your old rom. Don't know why 2.26 is not working, maybe you downloaded a corrupted archive. To install your old rom it is not required that activesync sees your phone. Go in bootloader mode and flash your old rom back.
i dont think i downloaded a corrupted rom file because i downloaded it from 2 different places, one from Tmobile site directly from my tmobile account.
what bootloader program should i use? please advise and location to download...
thanks,
mike
m3m3 said:
i dont think i downloaded a corrupted rom file because i downloaded it from 2 different places, one from Tmobile site directly from my tmobile account.
what bootloader program should i use? please advise and location to download...
thanks,
mike
Click to expand...
Click to collapse
bootloader program??? There's no bootloader program!
What i'm trying to tell you is:
- Your phone is stuck for unknown reasons. In this state you cannot recharge your battery!
- Before the remaining battery charge becomes too few, reinstall your old rom (the one you had before trying 2.26)
- When your phone -with the old rom- will be working again, then you'll have all the time to investigate on the causes of this failure.
- Now hurry up and install the old rom before it's too late (unless you have a second wizard that you can use to recharge the batteries)
To install the old rom you must go to the three-colors screen (the bootloader), connect to USB (but activesync won't start!) and start the rom installer.
bye
risi,
sorry...how do i get to bootloader screen? is it the tricolor screen? has anyone had the same problem that i'm having, going from 2.17 hack to 2.26 official?
what program can i use to load my original rom with?
sorry for the semi-newbie questions...desperate to revive my MDA...
again, thanks.
-mike
m3m3 said:
risi,
sorry...how do i get to bootloader screen? is it the tricolor screen? has anyone had the same problem that i'm having, going from 2.17 hack to 2.26 official?
what program can i use to load my original rom with?
sorry for the semi-newbie questions...desperate to revive my MDA...
again, thanks.
-mike
Click to expand...
Click to collapse
to go to the bootloader screen you must keep pressed the two keys on the right side of the device and, while keeping them pressed, shortly press the reset button. the bootloader screen IS the three colors screen. when you get the bootloader screen, reinstall your previous rom (2.17).
i plugged the phone in the wall charger and the battery charged up all last night so i am not worried about the battery...
i just cannot figure out how to load the old rom i had.
i didnt bring the phone with me to work...i will try to reflash with old rom...for now...i am using my old hp 6315 (yikes! - remember the probs with this phone?? lol
m3m3 said:
i plugged the phone in the wall charger and the battery charged up all last night so i am not worried about the battery...
i just cannot figure out how to load the old rom i had.
Click to expand...
Click to collapse
to load the old rom you must:
- get to the bootloader screen (the three colors one)
- download the 2.17 rom's ,exe archive (download it from the same place you took it last time)
- connect the phone to USB (don't worry if activesync doesn't see it)
- start the rom .exe file
thanks risi...
hope i can get it back man...
m3m3 said:
thanks risi...
hope i can get it back man...
Click to expand...
Click to collapse
I hope so! About the problem you had with 2.26, i don't know why it happened. Is your phone a T-mob USA MDA? If it is not then you must CID unlock it before flashing a different operator's rom.
Bye
yes, it is a tmo usa mda...or i would think so since i bought it from a factory store (not an authorized dealer). anyway man...i will keep you posted...for now, using my trusty hp 6315. lol
Hello,
I have a similar problem. I updated my QTEK 9100
with a T- Mobile 2.24 ROM. Now I need to go back to the original QTEK Rom, namely RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe, but after starting the upgrade process the program refuses to downgrade the device and says get a newer nbf file.
Is there a way to force a downgrade?
Many thanks in advance
Anais said:
Hello,
I have a similar problem. I updated my QTEK 9100
with a T- Mobile 2.24 ROM. Now I need to go back to the original QTEK Rom, namely RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe, but after starting the upgrade process the program refuses to downgrade the device and says get a newer nbf file.
Is there a way to force a downgrade?
Many thanks in advance
Click to expand...
Click to collapse
Is your phone CID unlocked? If so, then you must download the wizard_upgrade_noid tool from the ftp server and use it to install the 'down'grade.
In details:
- be sure your phone has been CID unlocked (and is not a G4)
- download the wizard_upgrade_noid (i don't remember the name exactly) tool
- use winrar to extract the original qtek rom .exe archive
- copy the noid tool to the folder where you extracted the qtek rom
- run it
bye
Hello Risidoro,
At first thanks for your fast answer. Since I have a QTEK I don't beleve it's CID locked. How can I verify if the phone is CID locked? Is there a tool to check this?
I proceeded exactly as you advised. I used Winrar to extract the files and used the Wizard_RomUpgradeUtility_noid I downloaded from the ftp site.
Then I copied the nk.nbf file to the respective folder but the utility after having completed the initial 2 screens says:
ERROR [238] : FILE READ
The update utility cannot open the requested file. Please check your update utility.....
any ideas
Greetings
Hello,
Just some small updates: My phone has currently the Mr Clean 2.3 firmware loaded : IPL 2.24 SPL 2.24 GSM 02.25.11 and OS 2.24.10.1.
Previously I was using RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe and had no problems. After upgrading to xelencin t-mobile based US rom I had trouble when making data transfers over GPRS. Then I decided to test Mr clean. Altough I data transmission has improved a bit it's still not so good as with my original RUU 2.17 release.
Unfortunately I am unable to revert to this version. Also having tried to downgrade using Faria's Custom downngrade file only the IPL was downgraded to 1.05 and the SPL file stayed to 2.24.
I tried then to reapply RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe but I recieved the error message UPGRADE only.
Since apparently this is unstable I decided to reapply Mr Clean and now I have again IPL 2.24 SPL 2.24 GSM 02.25.11 and OS 2.24.10.1.
I suspect that the data problems are due to the fact that these new radio versions are not compatible with our provider. I live in Luxembourg so we use LUXGSM.
Is there a way how I can revert to my old 2.17 software.
Any coments are highly appreciated.
Greetings
Anais said:
Hello Risidoro,
At first thanks for your fast answer. Since I have a QTEK I don't beleve it's CID locked. How can I verify if the phone is CID locked? Is there a tool to check this?
I proceeded exactly as you advised. I used Winrar to extract the files and used the Wizard_RomUpgradeUtility_noid I downloaded from the ftp site.
Then I copied the nk.nbf file to the respective folder but the utility after having completed the initial 2 screens says:
ERROR [238] : FILE READ
The update utility cannot open the requested file. Please check your update utility.....
any ideas
Greetings
Click to expand...
Click to collapse
Hi Anais,
try flashing with the RUU (Rom Upgrade Utility) tools that you find in this thread: http://forum.xda-developers.com/viewtopic.php?t=56088
Download the archive RUU.rar and extract its content somewhere in your PC. Copy in the same location the nk.nbf from the rom and run the .exe.
bye
For those who wanna just unlock but still want to use orange ROM
with GPS-enable
1. Using HTC_Trinity_SIM_CID_Unlock_v1.zip, run it unlock Orange
2. download new dopod d810 rom
http://forum.xda-developers.com/showthread.php?t=293809
3. extract RUU_Trinity_DOPODASIA_WWE_1.23.707.6_6275_1.35.00.11_108_Ship.exe
by using winrar , you will see a lot of file, find out RUU_signed.nbh
4. download dutty's good NBHTool v1.0
http://forum.xda-developers.com/showthread.php?t=296314
5. using it NBH to NB, to extract RUU_signed.nbh , find out Radio.nb
6. using NB to NBH, just put radio.nb in to radio, then change version to 1.23.61.5, device choose trin100, then generate NBH file
7. download Custom RUU Updater
http://forum.xda-developers.com/showthread.php?t=295113
extract it
8. copy the NBH file ( RUU_signed.nbh) should be around 13.5MB to
ModifiedRUUUpdater-V2-TRIN folder
9. run ROMUpdateUtility.exe
at the end, you will still using orange rom but only update the radio rom to 1.35.00.11
there maybe a easy way to do it, that's just what i have done for unlock sim and using gps-enable Orange rom~~
great guide! was holding off unlocking my m700 cos i'd loose the gps until orange released a wwe rom so now all unlocked and sorted!
help!
hi guys, i have just read some of these threads and as a non developer and simply a new SPV M700 user i am bewildered!
i don't suppose anyone would take a few minutes just to tell me in simple terms what the advantages of unlocking the SIM are and then let me have a step by step guide as to exactly how i download the phone pad software?
I read about the latest dopod ROM and obviously didn't understand a thing.
If this is not really worth your time, i totally understand but thanks for considering it anyway.
If anyone wants to email me and then give me a basic lesson via telephone then i would be extremely grateful.
In return any legal questions answered - fair trade?!
Thank you,
Raj
help
PS - my email address is [email protected]
actually what are you looking for?
advantages of unlocking the SIM only allow you to use any sim card you want, e.g. O2, vodafone..etc...
well, if it is easy to do, any basic guidance would be most welcome!
Hi !
Can I unlock SIM M700 using HTC_Trinity_SIM_CID_Unlock_v1.zip , without any other files ?
And from where I can download this ?
http://forum.xda-developers.com/showthread.php?t=293957
Hi guys!
Please excuse my ignorance.. I'm a total newbie... Can anybody please tell me how to get back the original orange uk rom on the spv m700? i just like the orange logo and settings back...I'm sorry if similar question has been asked already, i couldn't find the thread if there's any... Any suggestion is much appreciated.. thanks alot!
this is the thread, just follow the step i wrote in here, then you will keep using orange rom with sim unlock and gps enable..
Thanks very much, followed the steps - no problems, Works with my O2 sim Cheers. Wireless seems slower now though anyone else have the same problem?
Just checked the Wireless LAN settings - power mode setting has to be best performance now, it used to work fine set to best battery, hope this doesn't use all the power too fast now
Good job first!
I got one question. I got an orange M700 Dutch version and just only unlock the network with AUTO_Unlock_v1.bat. At point six (6. using NB to NBH, just put radio.nb in to radio, then change version to 1.23.61.5, device choose trin100, then generate NBH file)
1 Do I have to leave CID Type: SuperCID Or do I have to SiperCID my device?
2 Do I have to leave the language WWE or should it be Dutch???
Orange SPV ROM upgrade issue
Hi,
Has anyone else had a problem after upgrading their Orange SPV M700?
The upgrade went smoothly and the phone works fine when I put an O2 SIM (from my work mobile) in but when I put my Orange one back in it comes up as an invalid SIM
When I went to the Orange shop, the guy said that Orange lock the SIMs if they find the ROM has been tampered with - but I can't find any other references to that.
Anyone have any thoughts?
siupiu said:
For those who wanna just unlock but still want to use orange ROM
with GPS-enable
1. Using HTC_Trinity_SIM_CID_Unlock_v1.zip, run it unlock Orange
2. download new dopod d810 rom
http://forum.xda-developers.com/showthread.php?t=293809
3. extract RUU_Trinity_DOPODASIA_WWE_1.23.707.6_6275_1.35.00.11_108_Ship.exe
by using winrar , you will see a lot of file, find out RUU_signed.nbh
4. download dutty's good NBHTool v1.0
http://forum.xda-developers.com/showthread.php?t=296314
5. using it NBH to NB, to extract RUU_signed.nbh , find out Radio.nb
6. using NB to NBH, just put radio.nb in to radio, then change version to 1.23.61.5, device choose trin100, then generate NBH file
7. download Custom RUU Updater
http://forum.xda-developers.com/showthread.php?t=295113
extract it
8. copy the NBH file ( RUU_signed.nbh) should be around 13.5MB to
ModifiedRUUUpdater-V2-TRIN folder
9. run ROMUpdateUtility.exe
at the end, you will still using orange rom but only update the radio rom to 1.35.00.11
there maybe a easy way to do it, that's just what i have done for unlock sim and using gps-enable Orange rom~~
Click to expand...
Click to collapse
Can you post the final exe(ROMUpdateUtility.exe)? Because i have orange and little experience about that type of procedure...
I have the M700 White form orange and i didnt have to unlock the CID to upgrade to WM6 its just did it. Now im rying to do a mates old T-mobile MDA Vario (Wizard) now thats areal pain in the Arrrrrrrrse. Managed it though after a lot of searching and reading on this forum.
but back to the Trinity i just downloaded the rom i fancie na d ran the install and it did it no bother.
nealcass said:
Hi,
Has anyone else had a problem after upgrading their Orange SPV M700?
The upgrade went smoothly and the phone works fine when I put an O2 SIM (from my work mobile) in but when I put my Orange one back in it comes up as an invalid SIM
When I went to the Orange shop, the guy said that Orange lock the SIMs if they find the ROM has been tampered with - but I can't find any other references to that.
Anyone have any thoughts?
Click to expand...
Click to collapse
Dont you need to unlock the Sim and not the CIS ist two different things
thanks a lot
Just for reference: I did this - got to last step and got a connection error from my device. It flashed up the connection error on my pc, but the pda went to tri-colour screen.
I then ran ROMupdate utility again, with the tri-colout screen still showing on pda and it worked
great guide very help ful
thank you
So, guys, here is the first test SSPL for breeze. I have no breeze, so please report if it works.
extract to your device root!!!
start spl.lnk AND immediately press POWER and CAMERA buttons. (or try hust CAMERA)
if the screen shows sth like spl 1.01 DFR, then everything is ok - it is my spl
this version was intended to allow you to flash any CID rom update and unsigned nbh files. the next release will be based on the latest spl and include compatibility with new RUU of 1.34 rom updates and the feature to fix bad blocks.
EDIT - may 10, 2007 - SSPL V1 works successfully
CID check - disabled
NBH check - disabled
attached spl in nbh format for flashing - breeimg.zip
Thanks to:
DES for his SSPL
Olipro for his hard spl which actually saved me from hours of IDA analysing - I simply compared his spl to original and patched the one from breeze
at first try...
i have exactly what i descriped here:
http://forum.xda-developers.com/showpost.php?p=1253965&postcount=782
after the reboot i can't get into the bootloader...
what did you changed in the spl ?! or in the sspl.exe ??
I try... It's WORK!!!!!
what did you do??
edit:
ok, strange things goes on here ... just tryied it another time yet...
ipl-sspl by Des
SPL-1.01
should work
if i have time today i will try to made an cooked rom ...
if this works i look for a way to extract the files out of the excalibur wm6 rom ...
edit2:
i now have the problem that i can't connect mtty to bootloader... mtty ends with error when producing the cmd command line... i just had this problem with hermes to... i have 2 mtty version on all the 2 the same error...
i will try it now on a other machine..
1) Rename the BREEZE_HTCEUR_1.34.251.1_SHIP.nbh file to BREEIMG.nbh
2) Copy to sd card
3) start spl.lnk and immediately press POWER and CAMERA buttons
4) Phohe start in bootloader and flash new rom. (but no new radio)
THX
Thx for the replies, i`ll try to make a newer sspl. also, let`s begin the work for wm6 for breeze based on hermes rom... but in another thread some time later
can anyone confirm that they have sucessfully flashed a cooked ROM onto a breeze? Please update the wiki.
doedoe said:
can anyone confirm that they have sucessfully flashed a cooked ROM onto a breeze? Please update the wiki.
Click to expand...
Click to collapse
Hi, i work on it!!
on afternoon/evening i will try to cook a rom with a few freeware tools bases on the actuell rom!!
i can begin working on wm6 rom recently when extract the excalibur content... because of the problem that breeze is a smartphone an hermes a ppc there would be some problems with coredll's of the system! because of that i need smartphone wm6 rom... befor that there is no wm6 on breeze possible!
....
can anyone else can try mtty with the sspl ?
-----
engel98 said:
1) Rename the BREEZE_HTCEUR_1.34.251.1_SHIP.nbh file to BREEIMG.nbh
2) Copy to sd card
3) start spl.lnk and immediately press POWER and CAMERA buttons
4) Phohe start in bootloader and flash new rom. (but no new radio)
Click to expand...
Click to collapse
this should work when you have a new spl installed - and you want to flash another cid rom!!
has nothing to do with unsigned code!!
!!! only for understanding!!
hey what should i say...
it just look like that it works...
i have cooked a rom now...
only small reg changes!!
i have flashed it with hermes RUUUpdaterV2
only a OS file!
Phone boots! now i have to check if the changes are taken over!!
But why not ;Þ
Please post to the wiki.
I am hoping that we can use tornado WM6 code to cook a WM6 image...
I just added some Infos to wiki!!
Updated:
Breeze/MTeoR Upgrading Guide (4Hard/S-SPL)
Custom RUU Updater
I can also confirm that this SSPL truly works, but I am still unable to flash 1.38 radio over 1.29 currently installed with this SSPL version.
Any hints when could we expect SSPL based on some newer SPL release (like 1.09 or 1.10)?
just extract the radio rom what you want from an shipped rom ...
take it and re nbh's it with the nbgehn utility ... than put it in the custom ruu folder start ruuwrapper and flash it...
futureshock said:
just extract the radio rom what you want from an shipped rom ...
take it and re nbh's it with the nbgehn utility ... than put it in the custom ruu folder start ruuwrapper and flash it...
Click to expand...
Click to collapse
Tried that 3 times already. Doesn't work! Although process finishes whithout any glitches, System Info still says Radio ROM 1.29.00, and my phone still acts like crap...
.... i tried it too ... no problem... you should have done a mistake...
download an usb sniffer and let it run when updating... maybe then we can see the error...
but i had done it too... with sspl had no problems!!
I confirm this is also work on my dopod 595.
Now I need to search how to change the splash screen
what would you want to change??
futureshock said:
.... i tried it too ... no problem... you should have done a mistake...
download an usb sniffer and let it run when updating... maybe then we can see the error...
but i had done it too... with sspl had no problems!!
Click to expand...
Click to collapse
This is what I did/have...
- I have installed Radio ROM 1.29.00.10 (with older 1.32.251.1 RUU)
- My MTeoR is CIDed QTEK_A07 - all available RUUs fail with INVALID VENDOR ID error
- If I use SSPL (linked in this thread), my MTeoR actually does start SuperCIDed and I can run any RUU or custom ROM, and although all of them complete with success Radio ROM DOES NOT CHANGE at all.
My theory is (based on posts in Hermes upgrading forum) that Radio ROM 1.29 installed Radio BL 0108 which in turn does not allow flashing Radio ROM when started SPL is pre-1.09 codebase. I presume that it flashes with 1.09, 1.10 or newer only (makes sense because HTC released new 1.34 RUU which first installs SPL 1.09, then the rest of ROM).
Can anyone concur with my assessment or am I completely wrong?
Ohhh,thank.It works perfectly on my HTC MTEOR from O2 Czech Republic.
sp3dev said:
So, guys, here is the first test SSPL for breeze. I have no breeze, so please report if it works.
SSPL V1 works successfully
CID check - disabled
NBH check - disabled
Click to expand...
Click to collapse
WOW
I have now read for weeks the Hermes/Trinity threads wondering if this would be possible for "simple" smartphones too - and you did it
So while it is possible for the MTeor, maybe your kind of patching the SPL would also work for the Excalibur/S620?
I would love to flash my O2 Cosmo, but want to have an original ROM Backup for warranty/fallback reasons.
I also found out that it is possible to extract and cook ROMs for it like the way for the Hermes - but I cannot flash because of this f****g need for signed .nbh.
May be you are able to do this MAGIC on a Excalibur SPL too?
I would try out on my phone if you want to take the challange - if it doesn't work I think I'll have to get a MTeor
Anyway - lots of thanks for your work - and giving me back my hope on smartphone ROMcooking
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
ghumanfly said:
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
Click to expand...
Click to collapse
We need more information than this if you want help...
1. Wireless Carrier?
2. IPL/SPL?
3. Roms tried?
4. How have you been trying to flash roms? What method of flashing?
5. What is your PC's operating system(your computer, not PPC)
EDIT>> Answer these questions for me and I will try my best to help you tomorrow some time. I live in Cental US so I might not get your messages until later tomorrow your time but I will respond in the morning tomorrow.
info
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
couldnt attach any of the files... not sure what was causing the problem
ghumanfly said:
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
Click to expand...
Click to collapse
Ok I see that you have a G4. Lokiwiz is a waste of your time since you have a G4.
Here is what you need to do:
Because you have a G4, you can't just flash a rom because of the DOC chip.
There are 3 ways I know of to flash a G4.
1. Download shelltools - install enablerapi.cab and cert_spcs.cab and reboot your device. connect with activesync and place the nk.nbf file of the rom of your choice in the shelltools directory and run shelltools and follow the directions in the readme. If you do it correctly, you will end up successfully flashing your device.
Link: http://forum.xda-developers.com/showthread.php?t=293480
2. Download SoftSPL and place the nk.nbf file of your choice in the RUU folder included and run SoftSPL and it is fully automated. It will call the RUU and your device will be flashed in about 7 minutes.
Link: http://forum.xda-developers.com/showthread.php?t=329147
3. Use the HardSPL(CID UNLOCK) and unlock your device prior to flashing. This will allow you to just flash roms at your leisure with no problems whatsoever from now on BUT it is still in developement so use at your own risk.
LINKS: http://forum.xda-developers.com/showthread.php?t=332330
http://forum.xda-developers.com/showthread.php?t=332320
I hope this helps you. I personally have a G3 so this is not my area of expertise...
wm6
thanks alot me. it upgraded properly
i am trying get all add ons.
ghumanfly said:
thanks alot me. it upgraded properly
i am trying get all add ons.
Click to expand...
Click to collapse
No problem... Now you're at the fun part. Add ons!!
add ons
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
ghumanfly said:
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
Click to expand...
Click to collapse
I personally use the TNT.1437 TouchFlo and TNT.1437 Professional+HTC Home roms personally modified to have a 10MB page pool. They are quite fast and are almost 100% stable with only minor bugs that are barely noticible...
Here is a link to the 10MB Version of TNT.1437 Touchflo
http://www.megaupload.com/?d=TM2N1W2R
Here is a link to the 10MB Version of TNT.1437 Prof+HTC Home
http://www.megaupload.com/?d=RZFKY868
If you would like, I can speed up the performance of faria's rom also and then upload the new nk.nbf file for you to try. Just let me know.
speed
Yes, please.... speed it up for me. if there are any other applications (add ons) that you feel should be added to the nbf file then please add them.
i have already shared the nbf file with many guys at work. we would be grateful if you can assist.
one last thing, i noticed that there is a 3G icon under the comms manager. one of the guys said that we should not have any issues accessing 3G even if the phone didnt come with it. is it possible to use 3G on these phones?
cmd> prompt when i use mtty
--------------------------------------------------------------------------------
hi,
i;ve managed 2 screw up my wizard
everything was going well
i flased sucessfully 2 three different roms..
then i flased the tnt latest beta rom
i worked fine
i reflased the same rom by mistake as i wanted 2 flash a diferent rom
this is when the problem sarted..
the upgrade got stuck at 66%
i waited for 15 minutes..
then i disconnected the usb from the phone & since then the phones stuck in the bootloader..
i've used mty
this is where i'm in unknown teritory..
it gives me cmd> prompt
no USB prompt..
any sugestions??
Ok, so I tried installing the WM6 rom on my device without knowing it was in fact a Harrier and not a Blue Angel. I now realize I was very stupid in doing this. Now when it boots I get the stripes on the screen and "No GSM, D 5.60.00 WWE" written in the bottom right corner of the screen.
Does any one have an original Harrier rom they could upload so I can flash it back to the original WM2003?
If no one has that, is there a way to copy the rom from another, identical device?
xplode has a great firmware archive, where you can find about any original shipped rom, for the harrier, you find it here: http://firmware.atspace.com/Harrier.html
Thanks Chef_Tony. Thats got it working again perfectly.
i have the same problem it now says no gsm ....
what software do i need to make it work again ?
thx
andy
gripperwod said:
i have the same problem it now says no gsm ....
what software do i need to make it work again ?
Click to expand...
Click to collapse
Hit the link that Chef Andy listed, find your carrier in that list and download the latest one available
what i meant is which 1 do i download from the link chef andy left do i just use the upgrade tool or radio if so how do i find out which version i need ?
thanks
andy
gripperwod said:
what i meant is which 1 do i download from the link chef andy left do i just use the upgrade tool or radio if so how do i find out which version i need ?
Click to expand...
Click to collapse
Again, find your carrier (I'm assuming that the phone was running the official ROM that it shipped with for your carrier) in that list and download the latest one available. No one can tell you which one to download as no one else but you knows who your carrier is.
The radio version doesn't matter in this situation as the OS is coded to deal with a CDMA radio stack, and most, if not all, official ROM flashers will flash the radio stack with the OS. You are going to have to flash it back to whatever OS and build (usually WM2003 for the Harrier) is provided in the archive. If there are multiple versions of the ROM/radio available, generally the newer ones are the better ones.
You shouldn't need anything special for this as you will be flashing the official ROM for the phone. Download, run the executable and follow the on screen instructions.
ok ive downloaded all from these links and it tells me each flash ..
the rom image is not designed for your device . error code is wrong country code !!
i tried simunlock and now have no gsm showing in boot .
it was on uk orange network the phone is spv m2000
thx
well, your device is a blueangel, this thread is about the harrier. it deals with people trying to recover their CDMA devices after a bad flash, you have a GSM device, a completely different phone, and also, the source of your problem is not the same. thank god, the flash did not work, or your phone would be bricked for good.
you need to do a completely different procedure:
1. you go to xplode's BLUEANGEL firmware archive at http://firmware.atspace.com/Blueangel.html and download any rom in your language / from your country. then you put your device into bootloader mode and flash the device using maupgradeut_noid, found here: http://rapidshare.com/files/322928773/Chef_Tony_RUU.zip
2. then, when you have wm2003 back, please post back for further steps to go.
thank you i will do as you said and report back thx mate , ps are you realy a chef because i am lol i have been a chef around 26 years.
ok downloaded the orange uk but its file is corrupt so executable failed ...
looks like im not going to win ..
tried other orange uk files further down the list but still says country error code.
yes, the country id error is the reason, why you need to extract the 40mb exe file, put maupgrade in there, from the link i provided earlier, another thing to avoid the country id error, is to put the device into bootloader mode before starting the upgrade process, so, before you put the blueangel into the cradle, you press record+power+reset, until the display shows "Serial" and "V2.0x" where x is a number from 5 to 7, then you connect the device and start maupgradeut_noid.exe, which has to be in the same folder as the nk.nbf and all the other needed files. using the maupgrade instead of the BAupgrade and using the bootloader mode avoids nearly all the errors, like country id, device id and so on.
EDIT: btw. i am not a chef, i am a system administrator, the avatar and username are just my regular online name, named after the most ridiculous chef on american tv ^^
gripperwod said:
thank you i will do as you said and report back thx mate , ps are you realy a chef because i am lol i have been a chef around 26 years.
Click to expand...
Click to collapse
Tony is right, your phone would have been bricked.
For future reference, when you post, make sure to list your carrier and the exact model of phone. Anyone in these forums needs this info to attempt to offer the correct information to help.
In my posts, as Tony mentioned, this thread was dealing with Harriers, the CDMA version of the Blue Angel. When you jumped in, I thought that you were talking about a Harrier as well.
Keep in mind that each phone has it's specific ROM designed for that single model of phone alone, they are not interchangeable.
hi
after long time thought i might have another go ...
all the links you have supplied dont work eg: file is corrupt is the message im getting when trying to install software to pc.
i need the factory cd rom for the : orange spv m2000
i have no gsm on the phone since i upgraded the phone to wm6.5
ce os 5.2.21169 (build 21169.5.0.0)
please help
thx