hi there,
After I have successfully done the SIM & CID unlock on my Orange M700, the clock on the Orange theme just freezes all the time, only if i restart it, then it goes back to the right time, but one minute later it freezes again..
thanks for your advice.
shawn
Mine did that all the time without unlocking it (either SIM or CID), however after flashing to LVSW's WM6 it's been fine.
I would suspect the Orange extended ROM / pluging (not sure which is which but you know what I mean!)
Flash a shiny new ROM is my 2pence worth
Related
Hi,
First, I ran some tests on my kjam. The kjam came default with the kjam rom on it, naturally. I wanted to CID unlock this phone, so I downgraded the rom to button's "beer glass" splash screen rom. Then I was able to run aWizard successfully to CID unlock the phone. I then upgraded back to the original kjam rom. Both the downgrade and the upgrade went smoothly.
I then found out I wanted to customize my splash, so I downgraded again. I customized the main splash (not the HTC one) using aWizard. Worked like a charm. I also ran some extra itsme tools to read and write from rom in some locations I needed access to.
Everything was working great at that point. But the downgrade ROM didn't properly respond to some of the printed keys on the kjam keyboard, so I thought I should upgrade again. However, this time, I decided I want to keep my splash etc., so I tried to upgrade only my radio and OS rom, as backed up by aWizard previously, from the original kjam ROM. I used aWizard to restore the selected areas of ROM, rather than the RUU tool.
I upgraded the radio ROM, didn't reboot the device to keep the radio and OS in sync, upgraded the OS ROM, just as that was happening, the phone received a phone call (or text message, do not know which), and hung. While the aWizard eventually completed the upgrade, the phone did not reboot or "un-hang" itself after aWizard displayed success (there was no error on the console window).
So I soft rebooted the phone. The splash screen came, but without a GSM version on it. I was like, "shoot!", something bad must have happened, lets just put the full kjam rom on this, and get it over with - never mind the custom splashes. So I went into bootloader and applied the kjam rom.
Now it displayed the GSM version as well on the splash screen, but again, it never left the splash screen. I was like, again, "shoot!", lets just go back to that old downgrade ROM with the funny keyboard, then we can figure this out again. So I went into the bootloader and applied the downgrade ROM.
Alas, the beer glass splash screen remained hung as well! And actually, since then, I've downloaded and installed ALL ROMs I've been able to find - ALL of them have hung.
My bootloader is still working fine and dandy...any idea why this might be happening? Was the problem in the phone call I received? In using aWizard without rebooting? In using aWizard at all? In trying to manually edit the machine ROM using itsme tools (mind you, those edits worked fine until I started updating the GSM/OS ROM)?
And oh, after hanging for a while on the splash screen, the phone screen starts flickering real bad (whilst still on the splash); in case that provides any help.
To clarify the bootloader situation a little more:
I've got FULL bootloader capability. I can mtty into it, I can write commands, I can install full new ROMs from the bootloader, etc. So this would seem to indicate my phone may not be a brick yet...its a brick that can display changeable wallpapers I even figured out how to draw progress bars and write text to the bootloader screen using MTTY commands. Fun, actually! Its a $700 etch-a-sketch pad
Please leave. We believe here in HELPING people without charging them.
Hmm.
A $700 etch-a-sketch?? I bet someone would buy that on eBay if you called it that.
Hey I have a T-Mobile Vario with SPL 1.03 I tryed to just update the Radio Rom and I think I forgot to unlock CID !............
Now I can't get any connections anymore not even USB.............can anybody help me plz !!!
Also my keyboard doesnt work anymore ! when i restart it doesn'T even show the GSM or Radio Version anymore !!! Is there any hope !?
and it's slower than before............
Now, the next morning it won'T start at all ! only black screen ! sh***
Thx for answering !
I've the same problem. After flashing no radio work and all things are very slow. The next day it don't want to start up any more :-(
But I doesn't forget to unlock the CID.
What can I do now?
I don't know how but I got it back to start one more time but it crashed down after the Windows bootscreen and now it won't start again :-(
*update*
sometimes (after couple time of pressing reset, removing battery, ....) the device turns on and start to boot (or start bootloader when I press the button) but after a few sec. the screen is black again.
Ok, I found a solution in this forum.
The new ROM kills my battery but I got it back to live with the a 6V charger
I tried (for a 30th time or so) to upgrade my unlocked 3G MDA to another ROM.
In first instance it started up correctly and installed the customization. Then it rebooted, and since that moment it keeps on rebooting every 3 minutes or so, but it doesn't go any further.
go to bootloader "RGB Colors" then reflash
It has to be Both SIM unlocked and CID unlocked aka Super CID. Make sure it is both.
I unlocked it everything already a year (or so) ago.
I also removed both SIM- and miniSD card before flashing.
I am now flashing in 'RGB-bootloader' mode...it is flashing now, i'll let you now if it will work out!
It worked marvelously! Thanx!
I pressed the Camera-button while resetting, got to the RGB-bootloader and it all worked like a charm!
good to here that..
just post again when ever you have a problem..
Hello,
Today my vibrator goes mad, so I decided to send my phone back (I still have the warranty).
In order to proceed, I have to put back the official SFR ROM, and luckily I found this link on the wiki : ftp://xda:[email protected]/Uploads/Trinity/SFR_S300+_ROM_French_1.23.163.2_Only_OS.rar
So I did a little backup of all my data, I take off the memory card, and I started the installation.
But at 9%, it bugs. Hopefully, the ROMUpdateUtility display a message that I have to put off and put in the USB cable, and retry the installation. Its seems that works, because the transfer was complete and the phone reboot automatically .
But when the phone reboot, it display the classical boot screen SFR Bonjour, show some numbers (M 05 - B 05 - D 1.23 - R 1.50.08.11 - G 32.83.7020.20h) and when this numbers disappear the phone freeze.
I've try to wait half an hour, but the SFR boot screen stay, and the phone didn't respond to anything (I've try to put the power cable, and the LED set on only if the phone is off). I have to put off the battery to turn off the phone.
If somebody could help me, please!
And excuse me if I made any mistake, english is not my native language.
I have the same issue......
I have the same issue, my SPVM700 just sits on the initial splash screen after I tried to re-flash it to the original Orange ROM [as I too had to return it for a warranty repair]. I used Mozzer's Orange ROM [http://forum.xda-developers.com/showthread.php?t=309959] to restore it - the procedure looked the same as with other ROMs I had successfully loaded but it was only when I tried to restore the official MNO ROM that my Trinity bricked.
I can access the bootloader screen [TRIN100 IPL-0.50, SPL-9.99CP] and can flash the device, where the progress bar always reaches 100% on the PC and the PDA and then the PDA automatically reboots, however, it does not advance past the splash screen.
I have tried the Hard-SPL fix [ http://forum.xda-developers.com/showthread.php?t=299659 ] and then re-flashed the device with other ROMs that I had tried previously [Schaps, AX3L, HTC Official WM5 P3600 ROM etc..] but still get no joy - is there something that I should have done prior to re-loading the original ROM that I have missed and is my Trinity now forever a brick?
you've presumably tried a hard reset? but it's not written above so i thought i'd just check.. (pressing two soft reset buttons and pushing the stylus in the reset hole?)
Yes I did try a hard reset even though I didn't expect much from it as I had just replaced the ROM [effectively wiping the ROM and replacing it with a different ROM] and none seemed to boot. Once the device has started booting up, the only way to switch it off is to disconnect the battery [and the only way to switch it back on is to soft reset] so I am guessing there is a hardware issue caused by returning the device to the Original MNO build as this was the ROM upgrade that trashed the device - other ROMs tested prior to this had loaded successfully.
Sorry to bring this back but since the link is in Behemot's sig, it is not resolved yet. Have you guys loaded SSPL before flashing? If you haven't, the OEM Rom won't boot with HardSPL. Try flashing another custom Rom and use this method before flashing the Shipped Rom.
Good luck.
ask ilos for original SFR rom or search for extenue SFR rom. or contact me by personal message and give me your mail i have the SFR ROM without radio ROM (you can get the radio on this forum)...
Sorry, I've forget to update this thread...
So, for me the only solution was to bring back the device to an SFR store (it is still under warranty).
I believed they would reproach me that the RADIO was not the original one or something like that, but no. They didn't make any remark and send my device back with an official SFR ROM.
The only thing is that they take more than a month instead of the traditional two weeks to fix it.
So all is ok for me.
I hope you will solve your problem
Hi all,
I have been visiting these forums for 2 years now and have downloaded some great tools and ROMs to enhance my Trinity, however something all of a sudden has gone very wrong!
I upgraded to WM6.1 Elegance edition about 3/4 months ago, CID unlocked the phone about a month ago and everything has been working like a dream.
However just today, I attempted to turn the volume down on my phone during a meeting (I always forget to normally!) and there was no display. After few battery resets, again no display. It starts up, loads the the Elegance splash screens and then hangs on the screen before when the OS should appear.
My decision was to flash the ROM again. I cant flash using Activesync as it wont pick up on the hung screen, so I started the bootloader and got as far as 1% of the flash and it will restart. So I tried the SD Card method when resulted in a "loading" screen appearing for a few seconds and then it goes back to the standard bootloader and displayed a 00068002 error.
I am out of ideas, I hear mtty.exe is a good program for this kind of thing, but what I want to know is if this is fixable or if I should give up!
I have been working on this since 2pm today none stop!
Can any of you guys give me any suggestions please?!?!?
Kind regards,
Jonathan
Should be a cinch
Did you SPL the Phone before flashing roms?
If you put the phone into the bootloader mode The RGB screen and kill of activesync you should be able to run one of the flash update programs.
If I have flashing problems its usually Active sync so I kill it then run the flash program.
I've got a sneaky suspision your battery might be causing the problem.
Hi there, thanks for the reply. As I was new to upgrading I havent used SPL on the phone before flashing the ROMS. I did use an unlock tool recently as i wanted to try a different network SIM to see if it worked when I was in South America, so the phone is unlocked to all networks. Are you saying if I SPL now it should sort the problem out? If so how do I do this withour ActiveSync working - can you use SD?
Another thing I failed to mention was that when I start an upgrade and it follows all the steps, it doesnt say the current ROM on the screen where you press update ROM. It just gives the name of the new ROM and the current one is left blank.
I have disabled Active Sync before attempting the update. It seems to go through fine and then the phone restarts wafter 1% of the update.
What makes you think it is the battery? I am happy to spend under 20 pound on ebay if you think it will fix the issue!
try unbrick.bat.......my trinity was also stuck.......unbrick.bat save my day....
The same happened to me several time....I could not find a solution other than this one:
1. Flash the official HTC ROM.
2. Flash the required ROM then.
it works for my TrinTy.