Hi All:
I looked everywhere and I need to know if it is posible to get my phone to dial out using my BT headset. I know it is possible for WM 5, but I would like to stick with 2003se for now.
I have Tmo SX66 and Jabra BT125
Related
Any of you guys had managed to get the voice commands coming out from your BT headsets using MS VC 1.6?
i.e. you press BT headset to activate VC 1.6, instructions from VC 1.6 comes through BT headset, you give instructions through Mic of BT headset.
I tried searching in the forum and only managed to find one thread here but that seems to be only applicable to Hermes.
Any help on this would be appreciated.
zard said:
Any of you guys had managed to get the voice commands coming out from your BT headsets using MS VC 1.6?
i.e. you press BT headset to activate VC 1.6, instructions from VC 1.6 comes through BT headset, you give instructions through Mic of BT headset.
I tried searching in the forum and only managed to find one thread here but that seems to be only applicable to Hermes.
Any help on this would be appreciated.
Click to expand...
Click to collapse
i am using 1.6
When i prees my Headset's button, Voice recognition turns on but my voice command is heard by the phone and not through the headset. Maybe this is how it was supposed to work? Seems that actually working through the headset would be to much of a convenience.
i actually tried to make it work, but until now I havent managed to dial via BT handsfree.
i am now using Cyberon, which does the same thing i.e. u press BT handsfree button, it activates the voice command, and you have to talk to the Phone.
I also make a VoiceDial softkey button...
I guess I have to be happy with this, since nothing else works.
MVC 1.6
MVC Ver 1.6 is working well with my PDA2K upgraded to Helmi's 2.6. I have I-Tech Clip S headset and I can hear MVC in my headset. Also streams music to my headset.
wizard327 said:
MVC Ver 1.6 is working well with my PDA2K upgraded to Helmi's 2.6. I have I-Tech Clip S headset and I can hear MVC in my headset. Also streams music to my headset.
Click to expand...
Click to collapse
What are the profiles you have for the I-Tech Clip S headset?
Is I-Tech Clip S headset with BT 2.0?
When you receive an incoming call, does the audio comes in from the headset or the ppc?
When you speak, does the audio goes into ppc mic or headset mic?
Thanks.
zard said:
What are the profiles you have for the I-Tech Clip S headset?
Is I-Tech Clip S headset with BT 2.0?
When you receive an incoming call, does the audio comes in from the headset or the ppc?
When you speak, does the audio goes into ppc mic or headset mic?
Thanks.
Click to expand...
Click to collapse
My PDA2K recognizes my I-tech Clip S as wireless stereo and Handsfree. When I receive an incoming call, MVC announces the call through my headset but sometimes, announcement is through the phone ( mostly through the headset). When I speak, audio goes to the headset mic. I'm not sure if my bluetooth stereo headset is BT2. Hope this helps
wizard327 said:
My PDA2K recognizes my I-tech Clip S as wireless stereo and Handsfree. When I receive an incoming call, MVC announces the call through my headset but sometimes, announcement is through the phone ( mostly through the headset). When I speak, audio goes to the headset mic. I'm not sure if my bluetooth stereo headset is BT2. Hope this helps
Click to expand...
Click to collapse
I just bought the I-tech Clip Radio. It too was recognised by my IIs with Xplode's AKU 3.5 rom as wireless stereo and Handsfree. On the other hand, MVC doesn't annoucee incoming call to my headset at all. My voice too does not go through the headset mic. Very sad!
Can't see your signature but I think you are using O2 Atom. Does it come with Microsoft bluetooth stack or Broadcomm bluetooth stack?
Can you check for me if this dll file is present in your Atom. Do you have Task Manager by DotFred ( http://buzzdev.net/component/option...option=com_content&task=view&id=86&Itemid=1)? If yes, please run it and go to Devices, and check if the following is Loaded or Unloaded?
$device\WAV8(WAV8 => Reg Key is Drivers\BuiltIn\BtA2dpSnd
Mine is not loaded and even if I try to load it, it won't load. When I try to look for the file in \Windows, there wasn't such a file. If you have this file, can you upload for me? BTW, what is the Rom that you are using, i.e. which AKU? You can find out this information from settings, system, about. Mine is AKU 3.5, and it reads as OS5.1.195 (Build 15698.3.5.0).
Next, can you check the build for MS VC? Mine reads as v1.60.4622
Thanks.
I have an XDA IIs (Blue Angel). I was running the original WM2003SE on it.... I then upgraded to HELMI_BA_WM6_R0_Public rom and then to the latest RUU_BA_xplode_WWE_6.10.00 rom by xplode. I found both of them comfortable however with bluetooth problems on both
I can receive and talk on my BT headset (jabra BT135) but cannot hear WM player music... the sound can be heard on the speaker but not on the BT headset... I did not know the settings to direct the audio to the BT headset.
I have tried all the possible tricks and methods given in the xda-developers forum and some other forums but to no avail... after having spent almost 7 days sitting continuously on the job , I have still not been able to achieve any success.
I would be grateful if u could help me....with such smart guys in the forum, I cannot believe that it is not possible to get this right .... so I request you to please help me....I will flash my BA with any ROM tha u advice and load all other applications and cabs to make this bluetooth thing work.
Hoping to get a soln from u soon
Thanks
are you using a stereo bt headset? mine does the same but only when using a headset that is not stereo as the ba does\support them
jabra bt 135 headset
i am using a jabra bt 135 headset.....it has a single earphone so i doubt if it is stereo... but I have read in the forum that wmp audio can be directed to a mono headset also... there must be some way to do it... just the same activation needs to be done as for a phone call and I dont know how to do it
Dear all,
Has anyone go the bluetooth Jabra BT3030 to work with the WM6.1 (futureshock's) firmware? The device can recognize and pair with the Jabra. When the phone rings, you can hear the ringing from the jabra and even pick up the call but you cannot hear the caller nor the caller can hear you from the jabra. After you hang up the call, the phone hangs. There is no issue with Jabra since I can pair with an XDA II and that works well.
Regards,
Kueh.
Had exactly the same problem with Jabra 5020, no solution found yet.. downgrade to wm5 or wait until somebody revise BT drivers in wm 6.1 rom.
hi..
how do you pick up the call??
if you pick it up with the phone you get the call on the phone..
if you pick it up with the call button on the headset you get it there..
worked fine until firmware upgrade on my HTC Dream now it wont even find the device, makes no sense why they would leave drivers out of a "UPGRADE"
Works Great
I Recomended this device
Maybe anybody knows how to resolve it? The problem is that mic of bluetooth headset is not working with Cyberon Voice Commander Russian on Diamond!!! I have tryed many ROMS and bluetooth headsets already and without success. Voice Commander is starting by pressing of button of BT headset, i can hear the voice in BT speakerphone but when i'm starting to speak in BT mic nothing happen. When i'm using Voice Commander without BT headset it is working without any problems at all. Tryed it on my old Universal, the same problem. Tryed the same on Eten M500 and M800 of my friends, all is good working. As i see it is because the difference between Bluetooth stacks of HTC and ETEN? Who has the same problems?
I have this problem too. No idea for resolve?
Diamond + BT Siemens HHB-700
HI, Same problem!!!
has anybody found a solution?
same problem...
no solution yet?
Hello,
Same problem with Headset Jabra BT250.
Please Help !!
hi
maybe this help
i found this
http://msdn.microsoft.com/en-us/library/ms880945.aspx
just edit the register with some extra DWORDS
and it works (htc diamond with a pioneer caraudio with builtin bluetooth)
good luck
Hi, i'm trying to use voice commander 2.0 or 2.5 but i've the same problem:
when i have to talk to send a command to the program it does not hear me, i'm using a bluetooth headset and the origina rom italian.
the headset works fine.
ekosbravo said:
Hi, i'm trying to use voice commander 2.0 or 2.5 but i've the same problem:
when i have to talk to send a command to the program it does not hear me, i'm using a bluetooth headset and the origina rom italian.
the headset works fine.
Click to expand...
Click to collapse
Same problem with Spanish ROM ... ¿Any idea about what happends?
Same problem... And there is the same problem also on Touch Pro model.
I have noticed that it will work for be if I use the button but I have to only hold it about 2 seconds or it just beeps.
With button and long time hold, CVC works, but from phone and not from headset.
The problem may be in bt audio gateway driver or in an wrong AT bluetooth command send to the headset. I've try CVC 2.5 on HTC Tytn II, and all works fine with the same headset.
Same problem with French ROm et French CVC