Database Develop

Qtek 9090 Rom Update 1.40.154 German found

Hi all,
we found the update for a Qtek 9090. Here for any who need it to:
http://www.xtrem.cc/html/hochzeitsvideo/qtek9090/BA_DT_GER_14001_154_11200_Ship.exe
greets
werner
http://www.xtrem.cc
http://www.sfx-team.com
http://www.hochzeitsfilm-hochzeitsvideo.com

dead link
please upload to the FTP.

dead link
try this ...
http://www.xtrem.cc/hochzeitsvideo/qtek9090/BA_DT_GER_14001_154_11200_Ship.exe
Cheers,
Hawk

Hochzeitsvideo ??? :lol: :lol:
However, I tried last night to make my XDAIII work with the 1.40.01 ROM, but no way to upgrad that ****. I read something about to use instead of the "BaUpgrade..." the "MaUpgrad..._noID.exe" because sometimes we got some problems with "Country ID Error". I supposed to use the MaUpgrade exe-File with the 1.40.01 ROM Update, the proggi ask me if I want to upgrad from 1.31 to 1.40 ROM vers. and Radio from 1.10 to 1.13 - click OK. done. XDA screen's backlight flashed off and "USB" stands at the top and the Version at the bottom. Ok... after a few sec. the update proggi said: ERROR 120: Model ID Error .... your device isn't designed to work with this patch.
I don't know what tha hell 's goin' on with that thing. Because many other guys in our forum already done this.

do the flash in 3 steps
1) 1.40.1 CE
2) Radio following wiki.
3) Flush the extrom
The 1.40.1 is a type II rom and the radio is a Type I.
Make sure you only use the files that are posted and dont mix them around.
You also might be having problems as your device has a differernt Version Number (that is if you have a camera) thus you need the MA tool.

Hi,
I've done it yesterday night/today morning. I downloaded the vodafone VPAIII update and the Maupdate, extracted the exe to folder and packed the maupgrade in it. started maupgrade "ERROR 120: Country ID Error", aight, "EXIT" started program once more, works ! Great, now I have the 1.40.01 GER ROM and the 1.13 RAdio Version.
And a fully Vodafone branded o2 XDAIII :lol: :lol:
I'll de-brand it today night and install some of the o2 CAB's. But at the moment I'm thinkin' to installe magneto - not sure because of the per4mance probl. :roll:
thx !

KJAM ROM on 9100 !!!!

yes this is real.
The KJAM rom, which can be found in the FTP of this site, is working on the Qtek9100 !!!
does anyone have any thoughts about that? is this ROM a better one than the 9100? I think it is!

From what I understand, The KJAM is slower with its rom then the QTEK. Because KJAM is full of apps which might not be needed. Once those apps are removed it should be exactly the same ( are the rom version numbers not the same )
ANyone have any views on this ?

I believe the ROM dates are different, with the K-JAM being 9/16/2005 and the Qtek at 9/22/2005. I don't know the difference between the two, but I'd be interested to find out. Also, I'm still trying to find out how to change the splash screens (HTC, then i-mate) when it boots, but it's different than previous HTC models so far (not splash?.nb).
As for the apps, the difference does lie in the Extended ROM, so once you've custom-tailored that area, they should be identical.
HOWEVER, people on HowardForums are complaining about the Bluetooth in the 9100, where K-JAM users don't seem to be having an issue. I didn't check up further on this, can anyone confirm?

Would yo umind sharing information about details? How to avoid device ID error? IS there hacked exe file? I need to flash my QTEK with IMATE ROM since I think BT performance in IMATE is way better.
TIA

bt on the qtek smells

Grill! Wake up and give us a clue,please!

I did the soft reset after the WM5 setup so that the crap wouldn't install and it works great

so what did you do?
imate rom on a qtek???

i got a vender error when try to install the k-mate rom on my qtek 9100. what´s the trick, that it work without the error? please help!

nice we have to get around that.

Anyone try to place the Wizard in bootloader mode first before running the upgrade utility?
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.

BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade

pimbo said:
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Click to expand...
Click to collapse
Hi,
I don't think this is the good way because I unpacked the "KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
I don't know which file have to change to "MaUpgradeUt_noID.exe".
Any idea?
THX
TB

Again, if I can find out how the NoID utility bypasses the check by comparing it with the original (does anyone have the exact file before it was hacked?), and we can compare, it'll be a start to look for similar code or text in the EXEs or DLLs of K-JAM's upgrade utility.
Find me the unmodified version of the NoID utility. Look on the FTP, and check all the other Blue Angel ROM update utility's EXE files...

thebiker said:
"KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
Well
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Click to expand...
Click to collapse
Looks to me that somebody who knows howto and has this phone for testing could to edit the The ROMUpdateUtility.exe to bypass the country id errors,
And use as refference maybe the hacked no id loader for the BA.
P.s. the original MA upgrade utility should be found in the original roms from the providers of the Magician devices, we got it from them if i'm right.
Hope it helpes a bit,

I'm no developer, but this file sticks out in my mind..."RUUGetInfo.exe" If that is part of the upgrade installer then it looks to me that it is looking for the actual device ID, and it probably has to fall within a certain range to allow the upgrade to proceed. Something to the effect that each country, language or brand has a range. If your device isn't in that range, you are SOL.
With each generation they do something different, and more difficult.
Dave

i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file

vbguru613 said:
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
Click to expand...
Click to collapse
Nah, it's Much more involved than that. Just look at the process taken to develop the method to do it on the JAM, PDA2K, and so on. With each generation they make it more difficult.

Dopod 838 > K-Jam rom upgrade.. need some work
I had under my hands the Dopod 838 which is infact the cH version of the WIZARD.
I would like to load the imate K-Jam rom to the Dopod
Playing a bit with the machine, it seems that the Boot loader is actually looks like the Typhoon, the TyphoonNBFTools utility will decode the NK.NBF file but I am not sure what is the Vendor ID of the Dopod.
On top of it after altering the Languge from English to WWE and made the vendor DOPOD, the romupgrade utility reports the new version going to Prodigy and the Lang is English. it seems that although the TyphoonNBFTools was able to decode the NK.NBF, the upgrade application did not take the header information.
I did run also the Boot loader command under the MTTY (on the usb port) and command that did work for the typhoon "R2ds all" responded that I do not have the authority to dump the rom image.
Tried the command password WIZARD and although it did take it, still was not authorized to dump the rom image.
If somebody could help find a method to bypass the protection of rom , upgrade (bypass vendor , Country code...) it would be very helpfull to exchange roms.

:shock:
I've been playing with the ROMUpdateUtility.exe
Well, i've also noticed that the rom is like a typhoon rom.
Ive removed some strings to RUUGetInfo.exe(since this one seems to do the thing), but i cannot test it,
I got error 222, device not responding, (DUH, its a BA :lol
Maybe somebody can replace this file for the original in the folder and try running it. (if it passes the country id and the model no)
But it is a test, use at your own risk.
Do not blame me for anything.

New Rom: Tmobile UK: BA_TMUK_14200_112_11300

http://t-mobile.iris-global.com/files/BA_TMUK_14200_112_11300_Ship.exe
Seems to have appeared as the FINAL offical release from t-mobile for uk users.
I've not tried it yet but the number does seem to suggest it is a slightly lower version than the Dutch one
EDIT MDAIIIUser
Added to wiki

no surprises
build of 2003se identical to Dutch rom previously released:
version 4.21.1088 (build 15159.2.6.4)
Extended rom just hasth changed regional settings (english UK default)

Added to wiki

Still a lot of echo.
Can't pair my Motorola HS820, BA sees the HS820, but error on connecting.
Anyone a fix for the echo and for the BT problem?
Use 1.40 before, was less a problem compaired to 1.42
Please help.
Regards,
Max

Report Back - T-Mobile Rom.. One week or so on..
Hi All,
Wanted to feedback my impressions of the new 1.42 T-Mobile UK Spec Rom..
Well, it's been interesting.. I now have (or have had) most of the faults that everyone else is experiencing.. I never used to get them at all with the i-mate 1.40 Rom or the NL 1.42 T-Mobile Rom.. I have listed the bugs below..
1 - One Hard-reset when inserted into GPS Car holder
2 - Several occasions where I've "lost" the Storage Card (when serching for it on the device AND through Active Sync)
3 - Interesting situation where I've started TomTom5 and I've suddenly had to go through the set-up process again only to be told that there's no maps (Can only attribute this to an occasion where the Storage Card is not seen by the PPC - See above).. Solved by remove Programs, soft-reset then re-install off SD Card.. (quite annoying as I was lost at the time!)
4 - Occasional failure for BT Headset being recognised on an in-coming call (I use the Logi-Tech Pro).. Solved by Soft-reset..
5 - Sometimes, after soft-reset, get a low performance from the Device.. ie, after soft-reset and switching to phone where it takes a few seconds to "build" the phone screen..
Strange but as I mentioned above, I don't recall getting these bugs on the 1.42 NL Rom or the i-mate 1.40 Rom.. I might try a hard re-set on Monday then re-install my tomTom, etc to see if it carries on.. If it does, I MIGHT switch back to the either :shock:
That's it really.. I have had the early T-Mobile 1.06, the i-mate 1.40, T-Mobile NL 1.42 and T-Mobile GB 1.42 and finally the WM5 Roms and from what I've seen, I place them in this order of preference..
1 - i-Mate 1.40
2 - T-Mobile NL 1.42
3 - T-Mobile GB 1.42
4 - WM5
5 - T-Mobile GB 1.06

Hi,
Updated to the dutch ROM, is better then this UK ROM.
Version number is also newer.
Regards,
Max

dazed and confused
sorry if I'm being simple but ....
I though this was the last offical rom
http://www.iris-global.com/t_mobile_download/download_manager_mda_com.html
MA_TMUK_11300_128_11200_SHIP.exe
Rather than
http://t-mobile.iris-global.com/files/BA_TMUK_14200_112_11300_Ship.exe
How did you maanage to find the link?
What is the diference between the builds - How can I find a change log?
What is the BA / MA?
:?:

See here:
http://forum.xda-developers.com/viewtopic.php?t=31360

No difference in UK and NL Rom..?
[email protected] said:
Hi,
Updated to the dutch ROM, is better then this UK ROM.
Version number is also newer.
Regards,
Max
Click to expand...
Click to collapse
Hi Max,
The Rom is exactly the same and the only difference is the changes in the extROM that makes it either UK or NL Spec (ie, MMS settings, etc)
Hi Starfish - Perhaps you need to look at this for the answers to your other questions:
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners
Oh, and BA is "Blue Angel" and MA is the "Magician" HTC Names for the devices..

Sorry I did'nt read close enough Magican vs Blue angel

starfish_001 said:
Sorry I did'nt read close enough Magican vs Blue angel
Click to expand...
Click to collapse
That's ok.. We all have to start somewhere.. 8)
Now, I'm not too sure how far advanced you are in Upgrading, etc but before you do, please remember the following that I put on another post on here..
MrPhilly said:
General Tips to you (and others)..
If you do want to update or upgrade then make sure you read everything through first.. Make sure you're happy in doing it.. Perhaps use the search function to read through others comments.. I would also recommend reading others comments about trying to downgrade from WM5 to WM2003SE to see what others have encountered
You will not believe the amount of people who end up posting questions when they've not followed the instructions from Wiki that I've pasted for you here..
Finally, if you are stuck, use the search command and describe your problem in the Keywords section, select Blue Angel from the Category and read through the posts relating to it before posting questions..
Hope this helps..?
Cheers!
Click to expand...
Click to collapse

How can I upgrade to a stable rom
I have tried the TMobile NL and UK version both give the Country ID eror with the extra numbers 17-17-38-38-38
How can I safely upgrade to the 1.42 version (I have read the Getting Started With The Blue Angel) .
Is that the way to go?
"I get the password error on the xda3nbftool for the nbf segment"
I would like to get rid of all the phonesound failure and systemhangs with TomTom5.10
My Qtek9090
PH20B 0 B
WWE E
DANGA001
1.40.00 0 0
1.40.556
1.13.00 13.00

Upgraded to this from the last O2 update (my BA is an O2 Xda IIs), and while for the most part it works fine, now if the device turns the screen off for power-save while out and about, the GPRS connection drops. I know the hardware is capable of keeping the GPRS connection alive in such a situation because, well, it didn't drop it under the previous two O2 ROMs I ran.
Anyone else had this problem, or know a fix? Hopefully it's something simple that I've overlooked...
I'm getting better Bluetooth support with this (whether through actual improvements in the stack or through sheer dumb luck), so I'd prefer not to downgrade if I can avoid it.

Upgrade for NON OEM/Carrier Blue Angel
I have an unlocked OEM i-mate PDA2K. Because of this I am unable to install the T-Mobile upgrade to 1.42.
Is there a way to get around this?
I tried using the MaUpgradeUt_noID.exe, but I was unsuccessful.
Any ideas on how to upgrade a non-T-mobile branded blue angel?
Thanks

problems upgrading a non-t-mobile branded PD2K
BELOW IS THE SCREENSHOT OF THE ERROR

Did you make sure you had the MAUpdate file in the same directory as the actual upgrade had been uncompressed into? Since it's missing the RUU.DLL file that is part of that package.
Basically, get the files out of the real upgrade, then copy the MAUpdate into that directory, then run it instead.

I can not unzip or unpackaged the shipped OS
When I double click on the file, it runs the file, when you right-click and select extract, it gives you an error.
How do you unpackage the ship package?

Me, I used WinZip, I think it was.

Can not unrar or unzip setup files from exe package
the instructions states:
Unrar or unzip all files in exe or rar into a new folder. I get an error when I do that.
I also noticed that the instructions states:
First Method (Quick/Easy) (TYPE II), but there is another method Second Method (Slower/Harder) (TYPE I)
I am going to give that a try

O2 XDA IIs
Hi from Greece,
A friend bring me to Greece from Singapore one O2 XDA IIs but it has a old versions:
rom 1.31.00 wwe
rom date: 12/13/04
radio v:1.02.00
protocol version: 1337.32
ExtROM version: 1.31.920 wwe
sorry but I'm newbie here, can you tell me what (and where can i find) I must download in order to update to the latest versions.
I allready download the latest version from O2.UK for O2-XDA IIS but I do not want to lock my device to any network and that's the reason who asked you and I do not install this I allready download.
I allready see http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades but I don t now what I must download.
thk u

SPV M2000 changing language from English to French

Hi guys, I am totally a newbie on this, i only bought my SPV M2000 today.
Ok well it is:
Code:
OP Ver. 5.40.1.179
Rom Ver. 1.40.00 WWE
ExtRom Ver. 1.40.179 WWE
I have downloaded the file
ftp://forum.xda-developers.com/BlueAngel/Extended_Roms/Orange_Fr_SPVM2000_Ext_ROM_142179_WWE.rar
from the FTP.
Once extracted in winrar, i put the whole folder into my Memory card and run the Autorun.exe
It does some installing but then the following message comes up:
Code:
the file "\windows\iacontacts.dll" is in use or is in ROM. If the file is not in ROM, please close the application using the file"
would somebody pelase give me a step by step on this?
the phone is unlocked by the way and is on orange

could any onehere help please? at least with a tip

i would suggest getting the latest whole ROM from orange france, i will upload a version that will include radio 1.13 and will work with your UK device.

try this: Removed/Uploads/Blue%20Angel/orangefr_upgrade.exe
just run the .EXE
EDIT MDAIIIUser
File removed so below

you're a star man, that was the best help i got so far.
it worked like a charm. thanks bro

The orangefr_upgrade.exe is the same CE and EXT rom as found on wiki
http://forum.xda-developers.com/viewtopic.php?t=47465
The olny differnece is the Radio has been upgraded to 1.13.10 (also found on wiki).
Thus this is a Baked rom and I have removed it from the ftp site.

um, yeah. i made it for him.

Dead Charmer... maybe

Hi all,
I tried to upgrade my MDA compact II (HTC Charmer) to WM6, but during the first step, downgrading to the "no vendor" version I made a mistake. A used a wrong version, it was for Prophet. After the final reboot, the device froze in the splashscreen "T-Mobile". After that I tried to do exactly the same with a "Charmer" version, but it didn't help me, the situation was the same.
However, now I'm able to flash successfully only the last vendor provided ROM update "RUU_Compact_ll_2060227_20602110_021921_T-MobileUK_Ship.exe", but it doesn't help me anyway, my Charmer is still freezing in the splashscreen. I tried to downgrade it , but the application gives the following error: "UPGRADE ONLY". When I try to make a hard-reset, and after that to confirm the factory settings by pressing "Yes" (green) button, the result is "Format FAT partition" and then "format is failed".
Only the bootloader is working now as well as the battery charging. Please, help me to turn back to the life my Charmer!
And one additional question: can I perform a CID unlocking just by ROM-flashing or the device must be fully operable?

Flash this:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
After that, you should be able to make hard reset. If you succeed, flash "RUU_Compact_ll_2060227_20602110_021921_T-MobileUK_Ship.exe" - that.

Hello there,
I am a new use an recently got an MDA PM200. I am in exactly the same situation as petrun. I have tried the flash suggested by vlodeck but it doesn't work, saying incorrect vendor ID (I guess that's because it's for a Prophet?).
What should I do next...?
Thanks.

OK, I succeed with a little progress. Many thanks to vlodeck, I will try to explain what happend...
I successfully flashed my Charmer with this Prophet ROM:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
Full link:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
But it was possible only by using this "No ID" update application, not original one, maybe because my device is still locked:
Full link:
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
After that I succeed to format the FAT partition (finally ). But I cannot after all to flash the latest official MDA compact II firmware. There is two possible events, which I experienced:
1. When I try to use the original flashing application, I get the following response: "UPGRADE ONLY".
2. When I try to flash the official MDA compact II ROM, but through the "No ID" application, I get "INVALID COMMAND".
Just for explication, now my device cannot boot, it freezes in the splashscreen (it is Qtek now, not T_Mobile...) and the following versions could be read:
IPL 2.06
SPL 2.20.0000
GSM 02.47.21
OS 2.20.7.34
So, how I can do that? What should I do further? I would like to unlock my Charmer, but should I firstly make it operable?
Thanks in advance for your help, guys!

By the way, all described above I tried sevetal times with the same result.
The other thing is that... all links about the CID unlocking downloads, which I found here are no longer active. Any alternatives?

Rise from the dead!
Incredibly, but it's a fact! After successfull FAT formating I probably didn't wait long enough. Today I turned on my Charmer and several seconds after the splashscreen "QTEK" it successffully booted in WM5, performed all settings and finally started to work!
It's GSM module works, the Bluetooth works, I am able to start different applications. Just the camera does not work. And the most strange thing for me is that this ROM was for Prophet, not for Charmer
So, after all, how to proceed to upgrade to WM6? Now the bootloader is above ver.2.
Should I firstly flash it with proper ROM (for Charmer) or it's not necessary?
Should I unlock it as is now (Prophet ROM)?
Vlodeck, I rely mostly on you, since the WM6 with Touch FLO is your creation.
Thanks!

You dont have to CID unlock. Just flash that WWE T-mobile WM5 AKU2 for Charmer. Good luck.

Maybe I am boring, but steel need an advice: I cannot flash "WWE T-mobile WM5 AKU2".
1. The original RUU gives me "UPGRADE ONLY", maybe because my SPL after flashing the Prophet ROM is 2.20
2. This "NO ID RUU":
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
reaches 2% and gives "INVALID COMMAND", after that - only bootloader screen.
3. This "NO ID RUU":
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
cannot open the nk.nbf image (but works with other images), I don't know why.
What is the solution? Any ideas? Maybe some tool to downgrade the SPL to ver.1? I tried (it perhaps was bad idea)"RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" and IPL became 1.12, but SPL remained 2.20... and Charmer didn't boot after that. After flashing the Prophet ROM it works again and IPL is 1.12, SPL is 2.20
In brief... how to flash successfully the last Charmer ROM?

If you cant flash the AKU 2 charmer rom, then go for AKU3.3 rom (can be german, that doesnt matter). Once done that, flash wm6.

Success
Yeah! Thanks to vlodeck now everitging is all right! I flashed the original German AKU3.3 ROM by using this RUU:
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
(The original one gives "INVALID VENDER ID", of course, in German ) After that - successfully upgrade to WM6 TouchFLO.
Briefly:
1. First try to flashing WM6 - crash! The reason: old bootloader version (IPL/SPL = 1.12).
2. Flashing the Prophet ROM - success for FAT formatting. The Charmer turned back to life.
3. Flashing the German AKU3.3 ROM from T-Mobile, but through the No ID RUU.
4. Upgrade to WM6 TouchFLO by vlodeck. At the begining I reached the same problem, as described here:
http://forum.xda-developers.com/showthread.php?t=331717
but after istalling cert_spcs.cab and enablerapi.cab in my device I succeed to finish the process.
Thanks vlodeck, good job! This ROM is really amazing!

petrun said:
Yeah! Thanks to vlodeck now everitging is all right! I flashed the original German AKU3.3 ROM by using this RUU:
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
(The original one gives "INVALID VENDER ID", of course, in German ) After that - successfully upgrade to WM6 TouchFLO.
Briefly:
1. First try to flashing WM6 - crash! The reason: old bootloader version (IPL/SPL = 1.12).
2. Flashing the Prophet ROM - success for FAT formatting. The Charmer turned back to life.
3. Flashing the German AKU3.3 ROM from T-Mobile, but through the No ID RUU.
4. Upgrade to WM6 TouchFLO by vlodeck. At the begining I reached the same problem, as described here:
http://forum.xda-developers.com/showthread.php?t=331717
but after istalling cert_spcs.cab and enablerapi.cab in my device I succeed to finish the process.
Thanks vlodeck, good job! This ROM is really amazing!
Click to expand...
Click to collapse
WHERE I CAN GET BOUTH FILES cert_spcs.cab and enablerapi.cab
AND WHAT VIRSION OF PROPHET ROM SEND ME WORKING LINK THX DEAR

Charmer Stuck At Splash Screen
CHARMER STUCK AT SPLASH SCREEN
--------------------------------------------------------------------------------
I HAVE A MDA COMPACTII ''MADE IN TIWAN'' I WITCH WM5 I WANT TO UPGRADE IN TO WM6 SO I UPGRADE THIS WM6 TouchFLO Charmer WM6 ver. 2.1 FINAL by vlodeck AT THIS HOME PAGE http://forum.xda-developers.com/show...harmer+cert_sp... AFTER THIS I HARD RESET MY MDA C2 ITA ON BUT THE LANGUAGE IS NOT ENGLISH I CANNOT UNDERSTAND ....
SO I CAN REFLASH IT WITH THIS ROM Charmer_Touch_GER_Beta_2.7 .. AFTER FLASHING COMPLETE I SOFT RESET MY MOBILE.
SO MY MOBILE STUCK ON SPLASH SCREEEN ONLY T-MOBILE IS SHOW
MY MOBILE DETAIL IS AS UNDER
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
PLZ DEAR SIR WHAT IS SOLUTION OF MY MDA C2
MDA2 CANNOT CONNECT WITH ACTIVE SYNC

Of course it cannot connect with ActiveSync, the device doesn't boot. One certain solution for bricked Charmer is Prophet ROM:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
Use this link:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
In order to flash this, you should enter the bootloader, without using the ActiveSync. After that try to perform a hard reset, you probably will succeed to format the FAT partition.

if you cannot connect the pda to pc HOW CAN U PUT THE ABOVE PROPHET RUU ON CUREENT?

I have a charmer and I was trying to update to wm6. I can´t because the ipl is 1.12. I updated rom to german aku 3.3. But I can´t hard reset. format error. I´m trying to put prophet rom to format it, but when I send the prophet rom, it always give me an error at 95%. error 326 - this nbf file cannot be used fo your pda phone. please check your nbf file. the aku3.3 rom flashes ok. any idea?? I try tu send a radio rom. after that is the same. 95%error. please help. I can´t bring my charmerback to life.

Hello together,
I have the same problem like _mestre_.
I updated from T-Mobile AKU 3.3 GER to WM6 and flashed back to WM5 without problems, but when flashing again to WM6 from vlodeck my charmer didn't boot anymore and had that "Format is failed"-problem when making a hard reset. I could not recover my device until now with the method explained in this thread cause of the problems "error 326 - This nbf file cannot be used for your pda phone". So the Prophet Rom does not seem to work with boot loader 3.x. Has anyone any idea? Please help! Thank you very much in advance!

Yallah said:
Hello together,
I have the same problem like _mestre_.
I updated from T-Mobile AKU 3.3 GER to WM6 and flashed back to WM5 without problems, but when flashing again to WM6 from vlodeck my charmer didn't boot anymore and had that "Format is failed"-problem when making a hard reset. I could not recover my device until now with the method explained in this thread cause of the problems "error 326 - This nbf file cannot be used for your pda phone". So the Prophet Rom does not seem to work with boot loader 3.x. Has anyone any idea? Please help! Thank you very much in advance!
Click to expand...
Click to collapse
same problem here... any suggestions or is my charmer bricked?