Hi all,
reflashed ot Baniaczek's ROM. Now get a message on connect about the port being busy - used by another app.
How can I find out what's going on and change it?
What should it be?
Thanks all,
Paul D
bump
Please somebody help.
Paul D
Try providing more information.
More Info
If I try and sync with either Activesync under Virtual PC (I have a MAc) or with Missing Sync, the phone gives a "port not available" message. I've beentold its easy to change the ports in baniaczek's ROM, but Nothing I've tried has done it.
PauL D
bump
bump
Still need an answer. Phone will not sync or use BT GPS.
Paul D
Related
I've just upgraded my BA using Helmi Upgrade. Everything is working as usual except that my BA need a driver to get connected to computer.
I've searched the installation directory, and found no driver assosiated with this.
could someone help me plz...
your computer is looking for "Generic RNDIS Blue Angel"? had that same problem but after flashing Helmi 3.2... it just happened one day. not sure what i did to correct it, but some of these did the trick:
*changing USB ports
*deleting partnership on PC
*reinstalling activesync 4.2
(repeat as necessary)
really don't know which of these work, but what i did not do was i did not hard reset my BA, didn't even change anything on the BA. hope this is of help
andy_v4 said:
I've just upgraded my BA using Helmi Upgrade. Everything is working as usual except that my BA need a driver to get connected to computer.
I've searched the installation directory, and found no driver assosiated with this.
could someone help me plz...
Click to expand...
Click to collapse
try these two
it does solve the problem for me
Hi..huge problem here...
..I've been uisng Faria for about a week....very nice ROM...but yesterday i installed CheckNotification (for deleting old/duplicate niotifications..) and my AS stop working...
I tried mayn things from this forum..from switching to "COM connection" with USB switch, unchekd/checked USB to PC option....but nothing help.
When i cradle my Qtek 9100, ActiveSync detect phone...and status Synchronizing is in ActiveSync........but when it gotta be synchroniezd there is an error : ActiveSync cannot connect to the Windows Mobile Device...
I've even tried switch to USB mode (softreset+rec button) to make new ROM install from beginig, but I can't...i get error... ERROR 260 Update Error.
I'm not shure that CheckNotification software is guilty for all that..buw, before it's installation everything worked OK.
I noticed a few things..
when i cradle phone and my ActiveSync is in status Synchornizing...there is no sync sign on ma PDA in Start line as usually
my Contacts dissapeard
my Tasks/Appointments dissapeard..
I hope...i didnt' fuc*** up my PDA.
Any help? Please.....
Thank U very much!
Luka
akulp said:
Hi..huge problem here...
..I've been uisng Faria for about a week....very nice ROM...but yesterday i installed CheckNotification (for deleting old/duplicate niotifications..) and my AS stop working...
I tried mayn things from this forum..from switching to "COM connection" with USB switch, unchekd/checked USB to PC option....but nothing help.
When i cradle my Qtek 9100, ActiveSync detect phone...and status Synchronizing is in ActiveSync........but when it gotta be synchroniezd there is an error : ActiveSync cannot connect to the Windows Mobile Device...
I've even tried switch to USB mode (softreset+rec button) to make new ROM install from beginig, but I can't...i get error... ERROR 260 Update Error.
I'm not shure that CheckNotification software is guilty for all that..buw, before it's installation everything worked OK.
I noticed a few things..
when i cradle phone and my ActiveSync is in status Synchornizing...there is no sync sign on ma PDA in Start line as usually
my Contacts dissapeard
my Tasks/Appointments dissapeard..
I hope...i didnt' fuc*** up my PDA.
Any help? Please.....
Thank U very much!
Luka
Click to expand...
Click to collapse
i had the same problem and i did the following and solved the problem:
1. uninstall outlook (2003 or 2007 or other)
2. uninstall active sync
and after that reset computer and hen install
1. outlokk
2. install activesync
and u r donw. U can backup outlook files or sync again !! but it will solve the problem because sometimes he active sync misses up with exchange seerver and doing the following steps will solve the problems !!
I already tried that...i even trie updating from bootloader from other comp...but nothing....can I update ROM from SD?..and how ?
Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.
Everything is fine for me, are you sure that you flash the rom correctly as ordered ?
Sync problem
often can`t detect pda synchronitation . it`s show sync problem . Any way to fix it ?
I told you I don't have any problem which mentioned may be you have to reflash your rom, and start from the beginning.
Or first, you can delete your pairing connection with the pc, reinstall your active sync. And try to pair again. If you said "often", I hope this is not because of your hardware problem.
make sure your device is powered on ( the back light is on)..i also get it some time (only if i shut it by pressing Power Button at top)
Himalaya's USB Port is allergic to hubs
Don't try to use an USB Hub to connect the Himalaya to your PC. Always use a direct connection. This solved the problem for me.
...
Hi,
urbstar said:
Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.
Click to expand...
Click to collapse
Got exactly the same problem, since upgraded to WM6 (Tofclock Fresh ROM) Activesync never finds the PDA. Tried really everything possible, doesn't work. But 'cause there are some beautiful tools like WM5Storage or PIMBackup I don't care about ActiveSync.
May be its - as mentioned here - the USB Connection over USB Hub. But it's an internal one in my case so I can't proof.
And I don't think that the workaround for this problem is a ROM-ReFlash 'cause everything else works fine.
So long
HonkBB
i have same sync problem
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
i have reflashed 4 times now and still no good.
any ideas???
newquaymarc said:
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
Click to expand...
Click to collapse
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...
stupiddog said:
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...
Click to expand...
Click to collapse
cheer for reply but no cradle connected direct to my laptop
gonna have to go back to 2003 se till i hear of solution
shame xda runs great with wm6
I just want to ask you about active sync which version did you use ?
selangkahlagi said:
I just want to ask you about active sync which version did you use ?
Click to expand...
Click to collapse
thanks for replying
im using active sync 4.5 with xp pro all has been ok till this upgrade
I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck
selangkahlagi said:
I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck
Click to expand...
Click to collapse
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on
newquaymarc said:
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on
Click to expand...
Click to collapse
If you had old splash screen, big possibility you didn't do the last step
selangkahlagi said:
If you had old splash screen, big possibility you didn't do the last step
Click to expand...
Click to collapse
i did do it but dont think it ran correct, is it ment to run on 2003 se?
newquaymarc said:
i did do it but dont think it ran correct, is it ment to run on 2003 se?
Click to expand...
Click to collapse
did you do this step
hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
hi
yep done all that, NO-YES-YES i think the prep work before upgrade did'nt work..
maybe i need to goto wm5 then wm6, but wm5 was too slow for me to use.
a lot of laptops actually have one set of usb ports that are registered as a powered hub and often these don't really have enough power across all the ports... jst an idea...
active-sink!!!!!!!
hi all xperts,
lemme start with my Thanx to Tof the great and Helmi who have made this possible for the good ol' Hima..
Now i need some help -
I installed this package close to a month back with all instructions point by point.
Activesync was the problem..
Today i thot i'll increase the storage space - ran the unlock and then realised the Hima Doc tool is a exe file and i'll hv to have a valid activesync connection before i can get that worked.
Then i thot, i'll reload WM6.0
Again, started in Boot loader - Got the Serial Screen with v1.06 in bottom, connected my device to run the software -
I'm redoing the flash now - wish me luck guyz!!!!!!!!!!
Hi,
Been reading the posts and I can't seem to find anything relating to this exactly.
I had finally got outlook to sync with my work server when my admin man gave me a certificate to install on my TyTnII.
It worked a treat and then I decided to flash to HTC shipped ROM (I was on Orange - now unlocked too). It worked OK then too.
So I was brave and decided to give Dutty's ROM a go (Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_65.14.06_CubeV2_). Didn't work after that. Re-installed the HTC ship ROM and it still doesn't work (installed the certificate on PPC OK).
I have un-installed ActiveSynce and deleted the partnership but still no joy.
Has something been written in the registry ??
Thanks
I have duttys non-cube version 19700 version cooked and am having no problems syncing.
I just install my chain/root certificate first, fill out the server name, user name and password. Its worked on every cooked rom i tried (and Ive tried alot).
One little detail though that tricked me up for a bit was that you cannot be hooked up with your usb cable to your pc when you try to sync over the air. When the USB to PC cable is plugged in the phone tries to use the pc to sync with which wont work if its from home.
Find the same issue with using wireless.
Also know that if the company created a self-signed certificate you have to load the root/chain certificate first, but if its a recognized 3rd party certificate (like verisign or digicert) you don't.
Dont expect the autodetect server function to work during the setup unless you have a internet host name set up as autodiscover.domain.com and have a certificate with that name as one of its alternate names. Otherwise just set it up manually.
.
Hard reset and installed the certificate and entered details on the PDA and it says:
Synchronization could not be completed. Tyr again later.
Support code 0x85010013
Haven't connected it to my PC so can't be an active sync/regisry entry..
gstechno said:
Hard reset and installed the certificate and entered details on the PDA and it says:
Synchronization could not be completed. Tyr again later.
Support code 0x85010013
Haven't connected it to my PC so can't be an active sync/regisry entry..
Click to expand...
Click to collapse
Do you have acces do the exchange server, you can have luck in the eventlog for a more detaileds
and which Exchange version is it ? 2003/2003sp2/2007sp1?
I can say for sure, its not your activesync, on EX2007 security policies can have a problem be forced on the device. 2003 can have an other problem. I will look for you if i get home.
I have fixed it. But I would like to know why Duttys won't work.
I now have
ROM 3.03.405.0 WWE (date 01/08/08 US)
Radio 1.64.06.04
Protocol Version 25.70.40.02H
Syncs up a treat, but I would like to put Duttys back on. Any ideas or suggestions?
The admin guy said nothing had changed on the server and there were no logs
Sorry man, i totally forgot about you
But I tried a lot of roms, but i had never problems with my syncing same as Tayton. But how did you fix it? Just flash to an orginal Rom?
Sorry about the logs i was not clear enough. The admin can see if somebody is connecting with his device, and then you have some more details for exploring the problem. Most of the time errors from the PDA are to general.
Btw here is a link for more details about the error:
http://www.shijaz.com/exchange/activesync_errors.htm
I`ve installed WM 6.5 in my Qtek 9090, and when i put in dock to syncronize with my pc, said that the USB port is no longer availabile, chose another way to syncronize, or install a synchronazation software from the getting started disc... but i dont have this disk. what can i do to sync my phone with pc?
first of all, perform a hard reset by pressing power+reset+camera+record, in the menu that appears, set
Enable Kitl NO
Format Storage YES
Clear Registry Hive YES
using the camera and record buttons, confirm with the mail button.
make sure you delete older sync partnerships on your pc, you need to set up a new one.
if bot those actions did not work, try another usb port or finally flashing the rom again or maybe another rom, there are certain builds out there, that have sync issues, which one did you pick exactly?
Same problem
I have just updated a SPV M2000 to WM6.5 and cannot sync
I have tried a virgin PC running XP and this doesn't communicate. The USB connection is recognised by the PC but neither active sync works nor does the file manager recognise the PDA.
The PDA says that the USB port is a problem.
Can I still reupgrade? Maybe should I try an earlier version?
Is there a "known good" version of WM6.5 for SPV M2000?
Thanks for your help
hi and welcome to the forum.
what rom are you using (build number, chef)?
are you sure you followed the right upgrade procedure to the point? http://forum.xda-developers.com/showpost.php?p=4706441&postcount=2
especially the hard reset at the end is important and might help your case here.
yes, you will be able to upgrade/downgrade to change the rom, as long as activesync 4.5 is installed on a windows xp pc. that brings the needed driver for the device to connect, also if you can't sync.
there are many good wm6.5 roms here, just go to the blueangel rom development section and look at the different releases.
Same Problem sorted
Problem sorted.
Before you replied I tried one of the ROMs you recommended and Eureka.
This forum is really useful - thanks
I wonder if you can point me in the right direction. My real reason for upgrading the Blue Angel was to see if it would run Tom Tom Navigator 7 which needs WM6. It won't. I simply get the answer Program not for this device even though I am now running quite successfully WM6.5.