Related
Hello,
I`m trying to get latest lvsw wm6 to the device.
I own the phone since today.
I made the following steps:
Execute ROMUpdateUltility (Hard-SPL)
->Next->Next->Update
From: Image Version 1.16.407.2
to: Image Version 1.20
->Next -> Next
On the phone:
Enterbotloader.exe
"blabla"
YES
On the computer:
ERROR[246]: Device not responding
On the phone:
IPL-SSPL by Des
SPL-1.07.ds
ok,
trying to run ROMUPdateUltility again...
next next next... he shows me the progress bar --> finished! YES!
Rebooting the phone --> same software version as before the update?
trying to update for 2 hours... just to use gps as advertised
please help, i tried the official Update from HTC -> successfull but effects! programs, contacts etc still there, same version number!
messiah said:
please help, i tried the official Update from HTC -> successfull but effects! programs, contacts etc still there, same version number!
Click to expand...
Click to collapse
I've the same problem [246] upgrading unofficial roms like
GSM_1.41.00.11
and
ROM_ING_WM6_2.27
The only upgrade I make successfully is original
htcp3600-RUU_Trinity_HTC_ITA_1-23-408-2_103_6275_1-38-00-11_108
what's wrong ?
P.S.
I test it using activeSync 4.2 & 4.5
Messiah..... Have you read the very first post in the LVSW ROM thread?
I am NOT having ago, just checking, seems you may have miss-understood.
Grab ALL 3 downloads listed there.
Apply first one, and yes there IS NO real visible change to the phone apart from it has been hard SPL'd
Now apply Second one, will go through the same process BUT the Radio ROM is changed and updated
Now Apply the Third and WM6 is installed
The failure you describe is the computer dropping Activ Sync and then "seeing" the phone in Bootloader mode, which is why it take 2 bites of the first cherry, after that all "should " be ok.
I managed to get mine on the first attempt so it is "Me Proof"[TM] and "Just Works" (c)..... however report back if this hasnt helped
yeah, the process you described tells me that you've loaded hard-spl on your phone.. that's all. No WM6 yet...
I have the same problem.
I have Hard-SPL'ed my Orange M700
Then reboot and reestablish Active Sync
Then I have updated the Radio Rom
Then reboot and reestablish Active Sync
and now it's 1.41.00.11 in settings/system/device information
but when i apply
20070527_Trinity_WM6_v2.0.1.1 it uploads then i power on my device and it's still WM5 ?
What am I doing wrong??
Any help appreciated.
This may be a stupid question but have you SuperCID your device before running the updates?
If you go:
Start -> Settings
System
Device Information
What does it say under Radio version? (Just checks the second step has been completed successfully).
Also when you enter the bootloader what does it say on the screen?
akirainblack said:
This may be a stupid question but have you SuperCID your device before running the updates?
If you go:
Start -> Settings
System
Device Information
What does it say under Radio version? (Just checks the second step has been completed successfully).
Also when you enter the bootloader what does it say on the screen?
Click to expand...
Click to collapse
I thought you didn't need to SuperCID the device (http://forum.xda-developers.com/showpost.php?p=1245390&postcount=70)
My radio Rom shows 1.41.00.11
TBH I don't know. But it can't hurt to try it, I SuperCID mine and it flashes perfectly each and every time.
I'm merely trying to make suggestions that may get a result.
Oh, you didn't tell me what the bootscreen said and what version of Activesync do you have on your PC?
While doing the SuperCID upgrade i was wondering: After flashing any of the ROMs do I reboot or power On manually or wait for the device to reboot itself as the message in the SupoerCID tool suggests:
If radio upgrade went fine, wait until your phone reboots and make sure
ActiveSync is enabled again (you should see green icon in system tray)
Click to expand...
Click to collapse
Stupid Q: How can i make the boot screen stay long enough so i can write it down?
My ActiveSync is 4.5 on WinXP
Rummage around in Start--> Setting --> device ID, and version and stuff...... they are there and you get the same info as on the boot screen... and it stay on longer ;-)
Sorry if a little vague but away from phone at the moment......... erkkkkkkkk
/me runs off to find it so this may get edited
akirainblack said:
TBH I don't know. But it can't hurt to try it, I SuperCID mine and it flashes perfectly each and every time.
I'm merely trying to make suggestions that may get a result.
Oh, you didn't tell me what the bootscreen said and what version of Activesync do you have on your PC?
Click to expand...
Click to collapse
I didnt Super CID just followed the instructions in LVSW 's first thread, applied each DL in order and "it just works" (c)
Thanks. That's where i got the infroramtion from b4. I just thought it might be different in the boot screen.
I now did the SuperCID unlocking and did the 3 upgrades again. after the 3rd upgrade i still have:
- WM5.1.342 Build 15096.3.0.0
- ROM 1.23.61.5
- Radio 1.41.00.11
Q again: Do I need to wait after the flashing or do i immidiately press power
(that's what i do when it says finish) or do i soft reset? Or what else?
Thanks for your help.
Hmmmmm just got me phone....... dont ask
Right CE OS 5.2.1413 build 17745.0.2.3
ROM 2.0.1.1
Radio 1.41.00.11
Sooooo.......
a) are you using LVSW (just to be sure)
b) have you grabbed the latest version posted on page 1 of the upgrading thread?
c) I let it restart it self after it finished flashing, it then reclibrates the screen etc etc
Also looks like you havent upgraded anything just yet ... follow the instructions to the letter and it "should" be fine
a) yes
b) yes
c) there might be the problem i waited 2 mins ans as it wasn't rebooting i just used the power button. How long should i wait aftr the WM6 install?
I soft reset mine directly after the screen goes black. So that should be fine.
Maybe it has to do with my boot loader:
When i go to bootloader i see:
IPL-0.50
SPL-1.07.0000
then it starts fading quickly. is this normal? I have the same fading effect when i install ste 2 the radio ROM. but i still have the new radio rom on as it displays as 1.41.00.11
I again tried to use the 2.0.1.1 it uploads very quickly (maybe 2min) and then it's still the "orange" screen and WM5 on reboot and i still have all my data.
What a I doing wrong?
No. Mine stays there right up until the upload to the phone starts.
Then I get a grey background with a blue progress bar.
What happens if you run Enterbootloader on the phone. Then connect it to the PC.
Then run the install program on the PC.
The first process didn't work.
You should have:
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
Hmmmmm if all else fails try a hard reset on your phone and see what versions of what you have after that.
Did you use ANY form of unlocking prior to using LVSW rom?
/me suspects this might be casuing issues
The radio rom zoooooomed up to my phone and likewise the WM6
I cannt remember reseting the phone after flashing.... IIRC it just worked as in it finished then re-started and way hey off it went.
Also FWIW I just used the DL's in the thread without bothering with anyother boot loaders etc... ie extract flies in first DL into 1 folders, run them, ditto DL's 2 and 3.
Heloo every one ... i'm tired from this pda p3600 ... since 4 day's i wanna to upgrade my rom from wm5 to 6 & the upgrade process didn't work ... i try everything .... but non is work ...
first i was trying to make upgrade through windows vista home premium but didn't go well & this is the photo for my problem :
http://www.freewebtown.com/Haitham/CIMG0511.JPG
http://www.freewebtown.com/Haitham/CIMG0512.JPG
http://www.freewebtown.com/Haitham/CIMG0513.JPG
http://www.freewebtown.com/Haitham/CIMG0514.JPG
http://www.freewebtown.com/Haitham/CIMG0516.JPG
then i try to upgrade through my freind windows xp ... and also didn't work good .. the error message say that the phone is unable to upgrade do u rom flash or something like that ... so i try to instal the unlock & also same message ....
i'm in **** mood ...
any one can help me please
Until the new version of WMDC is released with fixes, I suggest you use XP computer to do upgrade.
New WMDC v.6.1 coming soon: http://windowsvistablog.com/blogs/w...ows-mobile-device-center-6-1-coming-soon.aspx
The XP computer needs to have Active Sync 4.5 installed. Reboot xp computer before starting, to clear any existing syncs. Delete current sync profile on Trin. Connect to pc via usb as usual, let ASync run, but cancel when it tries any profile, you are left as: Guest sync
You should be connected now. Upgrade rom file should be extracted in explorer, e.g., so you can see all files. Run RUU wrapper or ROMUpgrade exe, depending on rom you're using.
If you go through process, & get error message. Don't disconnect Trinity. Close that page & start again. It should work the 2nd time. When it's working, you will see the boot screen, color bars & at bottom usb notation. (If it says serial, you'll have to, unhook usb connection, reboot computer, re-sync to guest status, & start again.) Then the update screen on Trin will show % bar, if process is working correctly.
If you still get error message, then check Trinity Wiki info as rom upgrade problem FAQ is there. I'll assume your Trin is unlocked. Check boot screen on Trin to see boot loader info. Wiki explains how.
Also: Use SSPL software Bootloader solution from "Des" - this loader ignores the CID and the upgrade will work also with wrong CID. See also http://forum.xda-developers.com/showthread.php?t=293632
If you still have problem, come back here & give info:
1. What rom is currently on Trin? What radio?
2. Did you buy an unlocked Trin? Exactly, what device do you have?
3. What wm6 rom do you want to upgrade to?
Hi
I have a cingular hp 6515a . I cannot unlock it.I need an unlock hp 6515 rom image.please help me.
Unlock hp 6515
Thats very easy.
1: Download the (upgrade and unlocked) ROM from HP's website
2: HardReset your phone, but leave it in the first welcome screen (before the align screen and so)
3: Connect the phone to your PC, and wait for the connection to be established.
4: Run the downloaded Upgrade package (from HP), the phone will show a bootloader-screen.
Sometimes, the phone will not accept the upgrade program.
In that case do the following, but nothing else!
1: Disconnect the phone and soft reset it (it will come back into the bootloader)
2: Close the HP-upgrade program with taskmanager on your PC
3: Reconnect the phone to the PC
4: Rerun the HP ROM upgrade program.
Now your phone will show its upgrade status. It will take a while (about 20 minutes or so), but afterwards you will have a clean unlocked 6515.
I did this with several locked phones (especially Vodafone) from international sources.
Above will work fine, on every PC with Active-Sync (in my case 4.5) installed.
I assume, you will have a backup, made by the SIP-backup program on one of your memory cards. You can restore it after you've upgraded your phone
SKU error,, did not work
Unlock HP 6515
Did you use the rom you download here: HP 6515 ROM upgrades ?
I did it again today, but with a soft reset of the 6515 and shutting down the upgrade program with taskmanager. Do NOT Hard-reset the device or reboot your computer! Before restarting the upgrade, the computer has to reconnect to the 6515 although it is in the bootloader mode.
My hw6515 is dead after the upgrade to 1.21
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Has anyone managed to get this to work on a 6515 "A"? When I tried it I got an error message that said something like "Incorrect device SKU". I then decided to try upgrading to 1.20 which went smoothly. However, I still get the same SKU error message when trying to upgrade to 1.21. Is there a way to force it into bootloader mode? Anyone know some trick that I'm missing?
ROM Update 6515
SKU-error means wrong language.....
deivasankar said:
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Click to expand...
Click to collapse
Retry the update, or downgrade to 1.20
I Think Not..............
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
I've done it several times. The HP Roms contains also the RadioROM.
If you just think it cannot done... Why don't you give it try...
Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
What language do you use?
For WWE you wil find v1.21, v1.20, v1.12 and v1.00 here.
SKU ERROR help pls
cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
So how can we solve this problem?
Unlock and language change- this is how it worked for me!
This method worked for for an iPaq hw6515 after many long nights, but may be good as well for others:
Do this only from an Windows XP OS.
Make sure you have up to date ActiveSync from Microsoft!
To Unlock,
Just reflash your iPaq with the THE SAME language from HP official support site: h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=501212&lang=en&cc=us &prodTypeId=215348&prodSeriesId=501209&taskId=1 35
Connect your PDA to the computer and check it is in state connected in ActiveSync.
Download the current language ROM from the provided link, unpack, , and follow the instructions.
This official tool will do everything for you!
When it completes (~30 minutes), your phone will be unlocked.
After that if you need to change the language, follow this instructions:
How to change the language in your iPaq:
Here is the detailed process completed, borrowed from Barr :
1. Download and extract BOTH current and desired ROM language pack from HP site to the computer. Unpack them to different folders.
2. Establishing connection with the computer, copy EnterBL.exe (from desired language ROM folder) to the mydocument folder of the PDA.
3. Run the EnterBL.exe from the PDA. (Now your PDA will go to Bootloader mode).
4. (before executing step 4, prepare for step 5 since step 5 will have to be executed right after step4). From your PC, start updating the current ROM by lunching hpRUU.exe of the current installed language of your PDA.
5. Right after step4, when it will start updating, copy all the data (*.nbf) files of desired/intendedlanguage ROM pack to the current ROM pack. (the Rradio.nbf may be skipped if the device is already unlocked).
6. At the end of copying, it might show an error message, press OK to ignore.
7. The phone will restart!
Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
Same here i reflash again last night but upgrade process fails on .02%
I bought a HTC Touch Pro 2 TIM branded with Windows 6.1 that I have to unlock flash ... I downloaded the file that should be required, according to various indications "Rhodium-HardSPL_V2_00R3". PROBLEM: ... then I tried the above with: Windows 7 (64 bit) result error 246. tested on xp .... same error tested with VISTA idem .... I just disistanlations antivirus disabled any firewall .... nothing ... none of it. We must consider that synchronization is quietly .. ie by telephone inside ... but to initiate the procedure laid nothing to do. I tried pressing the buttons: volume down button + ... starting of the phone appears with the three colors ... you make me run the procedure to usb ... ... .. party is about 3 .. 4 .. 5 .. minutes and then by error 262. I do not know what to do. But once that has happened to me a little hacking ... .. do not know what the normal procedure via active sync the phone to complete a blackout ... restart with three colors to be clear .. the band appeared to load but then of nothing .. nothing ... error 262. I did the hard reset and point and head. -I make any mistakes in any step?. Then I tried with SSPL-Manual-RhodiumV1_10 but the phone system when it launched and I have to disconnect the battery .... Help me I do not know what to do ... definitely something wrong ... then .... hacking here and there ... I tried to install a rom update htc ... .. I did the whole normal procedure... three at once I installed new drivers on the PC ... in practice now sees the phone ... I relaunched the whole procedure Rhodium-HardSPL_V2_00R3 does everything expected but now when the phone goes into flash stage with the band that installation progress gives me error 262 up date error . This is new, but it seems a good sign as it would be an error loading the software being given up. What can I do or how do I do? Give me a straight .. and sorry ..... I thank you immensely in advance.
Ask this in the hard spl thread.
Hello,
I have a tytnII orange france radio 1.27.14.32.
I update my rom to MyPPC_MLs_K3.1_0816.zip using jump_1_56 because I can't update without it.
So the phone started normaly but the sound, camera not ok.
So I read that I must update also the radio. I downloaded the Kaiser_Radio_1.71.09.01 from http://webftp.myppc.it/index.php?dir=Kaiser/Radio/
I have found two methods :
the first is http://forum.xda-developers.com/showthread.php?t=393182
I tried it but when the phone is in the bootloader screen, he disappear and make a white page with a blue 'loading...' in the top,
I wait for 10 minutes and nothink ...
So I stopped the procedure, and the phone retart normaly with no problem.
I tried twice, the same problem.
So I start the second method, using the KAISERCustomRUU.exe, and of course jump_1_56 to get the bootloader screen with jump, so the procedure start with no problem until 99% ................. and here .............. ERROR ...
And now when I try to start my mobile phone, I have only t he bottloader screen with my old radio and STOPPPPPP.
In this point I try another time the first procedure with the sd card and radio 1.27.15.32 and nothing ...
NEED HELP PLEASE
original spl 1.81.000
try get a hammer and gently hit it as hard as you can for a couple times. here it is! you got a new radio version. i did this with my kaiser because i do not understand why i was so naive when i bought this piece of s#it!
thehou said:
Hello,
I have a tytnII orange france radio 1.27.14.32.
I update my rom to MyPPC_MLs_K3.1_0816.zip using jump_1_56 because I can't update without it.
So the phone started normaly but the sound, camera not ok.
So I read that I must update also the radio. I downloaded the Kaiser_Radio_1.71.09.01 from http://webftp.myppc.it/index.php?dir=Kaiser/Radio/
I have found two methods :
the first is http://forum.xda-developers.com/showthread.php?t=393182
I tried it but when the phone is in the bootloader screen, he disappear and make a white page with a blue 'loading...' in the top,
I wait for 10 minutes and nothink ...
So I stopped the procedure, and the phone retart normaly with no problem.
I tried twice, the same problem.
So I start the second method, using the KAISERCustomRUU.exe, and of course jump_1_56 to get the bootloader screen with jump, so the procedure start with no problem until 99% ................. and here .............. ERROR ...
And now when I try to start my mobile phone, I have only t he bottloader screen with my old radio and STOPPPPPP.
In this point I try another time the first procedure with the sd card and radio 1.27.15.32 and nothing ...
NEED HELP PLEASE
original spl 1.81.000
Click to expand...
Click to collapse
should make sure you Kaiser is "application unlocked", run SDA_ApplicationUnlock installed on your PC then copy sspl 1.56.exe to your device and run it !!!! to solve the problem on the device you must try hard reset at device (Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data )
lexpet said:
try get a hammer and gently hit it as hard as you can for a couple times. here it is! you got a new radio version. i did this with my kaiser because i do not understand why i was so naive when i bought this piece of s#it!
Click to expand...
Click to collapse
Hei dude , you really crazy lexpet <<<< Crzy
Hakim Rahman said:
should make sure you Kaiser is "application unlocked", run SDA_ApplicationUnlock installed on your PC then copy sspl 1.56.exe to your device and run it !!!! to solve the problem on the device you must try hard reset at device (Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data )
Click to expand...
Click to collapse
yow bro dont worry here is a thread that will set set you right its everything about radio that just helped me : http://forum.xda-developers.com/showthread.php?t=393182
thehou said:
Hello,
I have a tytnII orange france radio 1.27.14.32.
I update my rom to MyPPC_MLs_K3.1_0816.zip using jump_1_56 because I can't update without it.
So the phone started normaly but the sound, camera not ok.
So I read that I must update also the radio. I downloaded the Kaiser_Radio_1.71.09.01 from http://webftp.myppc.it/index.php?dir=Kaiser/Radio/
I have found two methods :
the first is http://forum.xda-developers.com/showthread.php?t=393182
I tried it but when the phone is in the bootloader screen, he disappear and make a white page with a blue 'loading...' in the top,
I wait for 10 minutes and nothink ...
So I stopped the procedure, and the phone retart normaly with no problem.
I tried twice, the same problem.
So I start the second method, using the KAISERCustomRUU.exe, and of course jump_1_56 to get the bootloader screen with jump, so the procedure start with no problem until 99% ................. and here .............. ERROR ...
And now when I try to start my mobile phone, I have only t he bottloader screen with my old radio and STOPPPPPP.
In this point I try another time the first procedure with the sd card and radio 1.27.15.32 and nothing ...
NEED HELP PLEASE
original spl 1.81.000
Click to expand...
Click to collapse
rom to MyPPC_MLs_K3.1_0816.zip also check the radio version the uploader who left the rom uses that can be of great help since you will know which one to use.
I have my shares of problems when i comes to this same issue so i took the time out to help you. Cheeer man
Moving to General because the Question is NOT DEVELOPMENT related.
Hello ALL and thank's for your reply,
First to restart my mobile phone I have used the mtty.exe with this manipulations :
1. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
2. put your device into the cradle
3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if it doesn't show then you didn't stop all active sync processes above!)
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset. (for some devices it can also be "set 14 0")
5. type "task 8" to get your device formatted
6. type "task 0" to ask your device reboot
7. take the device out of the cradle, and manually reset it if it does not do that already.
founded HERE
Second problem is to update radio, I have mysteriously found a link to a ROM update of orange France, after installing iit, my radio become 1.65.16.25 with WM6.1, I wasn't satisfied with the orange rom so I tried to install the MLS K3.1,
AND NOW .... all it's ok, sound, photo, bluetooth.
One more question please : do you think that I use my mobile with this radio or it's better to me to update it to 1.71.... is there a very difference or no ???
Link to ROM Orange France wm6.1 August 2008 HERE
Hello,
now I have another problem, I think that it's big one, I think that it's a big one, I explain.
I tried to install a new dialer, so I installed it into the phone, the phone restart ... and now nothing, he reboot continually.
I tried mtty with set 16 0, task 8, after task 0, and here he doesn't boot, I see the orange logo with the r ... g ... B .... in the left down and here STOP.
I tried Hard reset, 100 % ok BUT NOW I see only logo of Orange but not radio version, from version, nothing only the Orange logo.
So I flash with the original ROM of Orange, all is ok until 100 % but the same, he reboot, I see orange logo, 5 seconds after he rebbot another time, Orange logo, 5 seconds, reboot ....
Please help me to resolve the problem.
after 5 minutes without battery, I get the information in the left down and the mobile start with the WM6.1.
So I can't install a new dialer :-((
Thank's a lot
thehou said:
Hello,
now I have another problem, I think that it's big one, I think that it's a big one, I explain.
I tried to install a new dialer, so I installed it into the phone, the phone restart ... and now nothing, he reboot continually.
I tried mtty with set 16 0, task 8, after task 0, and here he doesn't boot, I see the orange logo with the r ... g ... B .... in the left down and here STOP.
I tried Hard reset, 100 % ok BUT NOW I see only logo of Orange but not radio version, from version, nothing only the Orange logo.
So I flash with the original ROM of Orange, all is ok until 100 % but the same, he reboot, I see orange logo, 5 seconds after he rebbot another time, Orange logo, 5 seconds, reboot ....
Please help me to resolve the problem.
Thank's a lot
Click to expand...
Click to collapse
try for radio upgrades, maybe it can help you! you can look here ===>> http://forum.xda-developers.com/showthread.php?t=393182 try to continue and do not despair
Hakim Rahman said:
try for radio upgrades, maybe it can help you! you can look here ===>> http://forum.xda-developers.com/showthread.php?t=393182 try to continue and do not despair
Click to expand...
Click to collapse
Salam, thank's for your response
From the last install of dialer and the bug of reboot, I have reflash my tytnii correctly BUT the problem that I have now is when my sim card is installed, the phone reboot systematically.
If I leave the simcard in the phone but I start with the Off line mode, it's ok, Just I change the mode to telephone here .... reboot ...... what the dialer have made in my phone ???????
thehou said:
Salam, thank's for your response
From the last install of dialer and the bug of reboot, I have reflash my tytnii correctly BUT the problem that I have now is when my sim card is installed, the phone reboot systematically.
If I leave the simcard in the phone but I start with the Off line mode, it's ok, Just I change the mode to telephone here .... reboot ...... what the dialer have made in my phone ???????
Click to expand...
Click to collapse
I think you get caught by Simdoor issue ...! try to search for sim unlock program for kaiser and install on your PC !!! You can find it here -->> http://forum.xda-developers.com/showthread.php?t=375583