Related
He I have a Qtek 9100 and I flashed it to Consam_Prophet_WM6_Crossbow_msyh_chs_beta2 Gives
IPL 2.26
SPL 2.26
GSM 02.47.11
OS 10.1.0.811
But now the thing doesn't want to boot any more please help
try this
Firware an old rom back on the device prefrebly the one you ohone came with and make sure you phone is cid unlocked. Also have you tried a hard reset
Force bootloader mode!
Check this out!
http://forum.xda-developers.com/showthread.php?t=294107
That worked for me and others!
Good luck!
ghailoo said:
He I have a Qtek 9100 and I flashed it to Consam_Prophet_WM6_Crossbow_msyh_chs_beta2 Gives
IPL 2.26
SPL 2.26
GSM 02.47.11
OS 10.1.0.811
But now the thing doesn't want to boot any more please help
Click to expand...
Click to collapse
A couple of things to start with. First of all get you device back working. As mentioned by epimazzo above, force your device into bootloader and flash a stock ROM not a cooked one. Read the thread.
Once you have got your device working start reading before making any more rash decisions about upgrading to WM6 (especially when the file name hints that it is for a Prophet and not a Wizard). There is only one leaked Crossbow ROM for a Wizard. This has been cooked a few times (Orwell, PDAViet, Underground). There are many threads on the merrits of each ROM but you need to read read read before you end up with a brick.
Fixed Boot crash problem
Thank you Guys for all the help; I got it back running.
formatted : Push the network button and the voice button and reset then release the rest and you get the balck screen that has the press send button and that formats Wizard and then
Push the Power + Voice + Camera and I get the Red Green and White screen. quickly Update the ROM to the origunal one I have T-Mobile. It worked. You guys are the best. I found 5._Underground_edition_Crossbow_ROM But I was not able to flash it. I need to unlock the CID but I read that I would have to down grade the Wizard and then Unlock the CID. I am still looking for the old ROM.i think I found it. If anybody has a better way to Unlock the CID please tell me.
Thank you a Million tiles for all the Help guys.
I have a CID unlocked wizard which has seen many roms, without any problems.
Lately I upgraded to IPL/SPL 3.08 and tried the touchflo rom.
Since it didnt work as expected, i presumed i needed to go back to the button rom before burning yet another rom.
Guess that was a mistake. I am now stuck on IPL 1.01 ! Whatever I do, cant get it to go to anything higher. Tried 2.26 IPL/SPL only, the full t-mobile version, the 3.08 again (which gives me spl 3.08 only this time), the german rom etc.
All that changes is the SPL. Tried installing enablerapi again, no result.
I can always get back to 1.01 IPL/SPL but THAT's IT ! NO other ROM works anymore!
What to do, what have i done....
You mean you can flash and work with Button ROM?
If so why not try to go from there to Qtek WWE 1.06, then 2.17 or 2.26?
tried flashing to 1.06 .. and got at 96% that the NBF was no good for my device.
However it changed the spl to 1.01.0000 instead of 1.01.
you should flash the buttom or love rom over and over again til you get both spl and ipl to 1.xx. people in the the threads have commented that sometimes it could take up to 8 flashes or more to eventually get it to work...dunno what causes it, but afterwards, flashing to a carrier rom should be fine...
good luck
Please read my first post.
I can get both IPL and SPL the same without a problem.
Both are 1.01 at that point.
I have been burning ROMs for a year now, so I know about this stuff already.
It must have something to do with going back from 3.08.
I have been on 3.08 both IPL and SPL dont forget!
At 1.01/1.01 IPL/SPL I still can not burn any ROM without error.
It wasnt like this before, have been on high numbers already.
after trying yet another operator ROM, gone back to IPL/SPL 1.01/Button ROM.
(shouldnt it say 1.05 btw?)
Button doesnt fully install anymore.. it gets stuck at about 98% after discobuttons.cab on the extended rom installation.
maybe that is a hint?
should i reinstall enableRAPI and cert_spcs before upgrading? my phone is cid unlocked for sure, and the service tool also says it is.
UPDATE: * installing xda mini..
* it got me 1.01 / 1.05
* reinstalling mini
* install also stops on signed discobuttons.sa.cab
d-lite said:
after trying yet another operator ROM, gone back to IPL/SPL 1.01/Button ROM.
(shouldnt it say 1.05 btw?)
Button doesnt fully install anymore.. it gets stuck at about 98% after discobuttons.cab on the extended rom installation.
maybe that is a hint?
should i reinstall enableRAPI and cert_spcs before upgrading? my phone is cid unlocked for sure, and the service tool also says it is.
UPDATE: * installing xda mini..
* it got me 1.01 / 1.05
* reinstalling mini
* install also stops on signed discobuttons.sa.cab
Click to expand...
Click to collapse
It means you can take it as far as installing extended_rom? Why don't you soft-reset the phone when the message of the 3 seconds appear?
if you're just installing button rom as a step to higher roms why the extended_rom? Simply forget about it and install 2.xx
No roms worked anymore, so tried ipl/spl 2.26 together with the installer from button.. it gave me 2.26 on spl again. NO change still on IPL.
IPL seems pretty stuck on 1.01.
in case it helps, are you flashing on windows xp or windows vista?
Here, try this. It's IPL/SPL 1.05 only. I'm not sure if it will work but it's worth a try.
It gives me 1.01 / 1.05 ....
trying multiple times .. hold on
tried 10 times.. ipl 1.01 spl 1.05
giving it few more tries on button
oh windows xp professional 32bit ..
trying love, buttong all in a row again.. still on IPL 1.01 SPL 1.01.
I think i found a new way to brick a wizard, goto 3.08 and back to 1.01
However, I think the phone not fully installing the extended rom must be a hint, since it usually had no problems with this.
Now on love and button, it stops at discobuttons.
Hate to tell you this, but I'm out of ideas at the moment. If I think of something, I'll let you know though.
Just a quick thought though, did you try removing the battery for about a half hour or so and then trying it again?
will leave battery out all night and try again tomorrow.
apart from the 'not being able to fully install extended rom' another thing that is remarkable is that the wizard service tool says I don't have a Wizard, after that however the info is correct (wiza200, cid unlocked etc).
further most ROM installers now crash at about 95% with error 320 saying the NBF is not made for my device.
is there anyone that has succesfully been on ipl/spl 3.08, down to button and up to 3.08again?
something else, the bootscreen doesnt show a GSM ROM version anymore, is that normal on ipl 1.01, could it be that i need to downgrade to certain gsm version ?
^$%#$ i dont think i can get the t-mobile service department to fall for my bricked mda excuses for a second time.
was pretty proud i got them to fix it for free first time i bricked it.. but this is different hehe....
(in case you wonder: 24volts made them not discover the cid lock, just created a bigger problem for the phone so they gave me whole new pcb.. i said the powersuply caused it )
The person that I was helping on that other thread successfully got his from 3.08 down to 1.01 and then back again. It wasn't easy, but getting theirs back up was a walk in the park compared to yours. I seriously hope that leaving the battery out over night does the trick because I'm pretty much at a loss as to what else to do.
It not showing a gsm version shouldn't be a big deal. You said that your rom installers are shutting down at 95% so it just may not be installing the radio, but your wizard should still operate without it. You just wouldn't be able to do any phone related things like make calls etc. but everything else should still work.
Don't worry about the wizard service tool saying that it isn't a wizard, it says that when I run it on mine too.
Just a thought, and definitely not a suggestion since you mentioned the 24v thing, do you have insurance on it? Accidentally dropping it in the bathtub might help solve your problem, not that I would ever condone insurance fraud or anything like that. All you would be out would be whatever your deductible is, although if your deductible is like mine it still wouldn't be cheap. I'd still give a little more time before doing anything rash anyway.
xeno1 said:
Just a thought, and definitely not a suggestion since you mentioned the 24v thing, do you have insurance on it? Accidentally dropping it in the bathtub might help solve your problem
Click to expand...
Click to collapse
good idea, but on the limit for this kind of thing for this phone as you can understand from the 24v issue
now at work, phone doing without battery all night... told him it is final warning, maybe taking his juice away will make him realise it is time to get to life
LOL Good idea. Tell it that if it doesn't decide to straighten up and start working you're going to run it over with your car. That ought to make it decide to work again'
So did it fix it?
oh man it got really angry with me.
on the wizardlove rom i had no radio @ all. but no charging or power info either!
you guessed it, been playing with wires and a 1.5v-12v powersupply set on 4.5v. Since it was doing it's paperweight imitation on me.
Got power back on 39%, going for a uuh 41% walk of my labrador.
Keep you posted.
Btw, extended rom in wst is unknown... is that any hint?
could protocol version be a hint?
next thing i try is flash another radio first, turn around the sequence.
Hmm, with the things that are hapening right now, no radio and the extended rom being unknown, I'm starting to think maybe the rom you're flashing has somehow become corrupted. You don't really need to worry about the ROM or the radio too much anyway, that shouldn't really have any bearing on whether you can get your IPL up or not. Try just flashing the 1.05 IPL/SPL update or the 2.26 update again and see if leaving the battery out for a while finally lets you upgrade it.
Hello all,
I am somewhat of a newby here, but I have successfully unlocked my Cingular 8125 and installed a couple of WM6 ROMs. I followed the procedure of downgrading to Button 1.05 ROM, then running Lociwiz, then installing T-Mobile 2.26, then WM6 ROM. Worked great...until now.
I was going to try another ROM, and I followed above procedures (didn't know if I needed to after initial unlocking, but I did anyway). At the "install T-Mobile 2.26" step, after 1 %, I got an error 326?, nb file not for this device. I can still install cooked WM6 ROMs, and the SPL changes, but IPL always remains at 1.01. If I try to install IPL/SPL 3.08 CAB, SPL changes to 3.08, IPL stays at 1.01. I have re-installed Button Rom 1.05 and run Lociwiz a dozen times to no effect. Even the Cingular WM5 OS meant for this device gives me the same error code as the T-Mobile.
I'm hoping this is a simple newby error. Anybody have any suggestions.
Thanks for any help.
By the way, after loading Button ROM, my Wizard hangs during the customization routine at Signed_DiscoButton8.sa. I must soft reset.
I got exactly the same problem.
I am now on IPL 1.01 , SPL 3.08, radio 2.69, using rom NBD 8.3
doesnt seem a problem however...
d-lite said:
I got exactly the same problem.
I am now on IPL 1.01 , SPL 3.08, radio 2.69, using rom NBD 8.3
doesnt seem a problem however...
Click to expand...
Click to collapse
Hey m8,
have you forgotten this thread (http://forum.xda-developers.com/showthread.php?t=319582) ? (see last post)
mestrini said:
hahaha nice to see good spirit after all this
Here goes:
Make backup of the CID block (VERY VERY important!!!)
Make backup of the GSM calibration block (VERY VERY important!!!)
Kill wcescomm.exe process
Start mtty, enter bootloader mode in Wizard and connect
type doctest (this will write test patterns in DOC chip and clear all data!)
Flash button ROM (1.01_IPL/1.01_SPL/1.05_OS)
Flash CID block backup (don't miss this)
Flash GSM calibration backup (important)
If all ok then remember to upgrade to 2.xx before installing WM6!!
Post results
EDIT:
Use WST for steps 1, 7 & 8
Click to expand...
Click to collapse
are you willing to prove me wrong?
mestrini said:
are you willing to prove me wrong?
Click to expand...
Click to collapse
yes.. missed your last post to be honest, sorry..
(btw phone is happy till now .. but we go for solving it, killing seems impossible)
step 2, gsm callibration block.. how do i copy?
D-Lite
use the "Read ROM" button and select the appropriate section from the list.
status:
Code:
DOC ImgFS partition read/write test PASS
Ext ROM partition read/write test, offset=0x0, length=0xA00000
Test pattern =0xAA
Flash Ext ROM failed.
DOC Ext ROM partition read/write test FAILED
--Flashing button rom @ 100%
--DATA CRASHES PLEASE CONTACT SERVICE CENTRE
--WST Says I am still on SPL 3.08 and rom is write protected.. screen of wizard says SPL 1.01 ...
--Installing Button ROM, ... SIM Lock SUDDENLY
--Screen goes funny flashing between simlock and customise
--Few soft-resets, WST now convinced on SPL 1.01 and flashed CID block
--Soft-reset
--Imei gone, flashed back GSM callib. data, softreset
--doesnt boot passed the pint of beer... going for RUU of T-Mobile 2.x
--bootloader, flashing RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe
--The NBF can not be used for your phone @95%, followed by congratiolations (stupid software)
--trying UK version...
--all give error 326
--another button flash
--*PLING IDEA* on 3.08 i couldnt doctest properly... so doing it again
-- bad idea.. same result...
damn... i thought it would work
anyway, there was point where the phone had same values for IPL/SPL (not too bad ). What is strange is why phone didn't boot anymore after flashing the GSM calibration and saying the flashes weren't suited for the phone.
What state is it on now? Wanna go again? This time, instead of flashing the 'GSM calibration data' do a simple IMEI writing and try to unlock CID before upgrading to official ROMs
sorry for this...
IPL locked on 2.26
I am having the same issue. I have tried numberous times to load my original rom and get the 326 error @ 1%. My ipl remains locked on 2.26. Is there any way to fix this? Please help.
it is now on 1.01, got my own imei back, spl 3.08, nbd 8.x rom...
everything fine again.. pretty sure it has something to do with ext.rom and/or write protection of it.. will give it another shot but not this month.. getting busy
@acmickey, not sure if you got same issue... is your IPL 1.01? else you might just have a locked phone..
Hey d-lite,
I followed your example and loaded BSD8.3 ROM and IPL/SPL 3.08 and radio 2.69. Everything seems to be fine. No missed calls. All programs work (touchflo is pretty cool). IPL is still locked on 1.01, even though SPL is 3.08.
I tend to agree with you that something is suspicious concerning the extended ROM. The first symptom I had that something was wrong was after loading Button's ROM, during the customization routine, Signed_DiscoButton8 would not install. Phone locked up and had to soft reset.
Oh, well, at least the phone works. The downside, of course, is that you can't load an original ROM, even though you can load a cooked one. Weird, huh?
Hopefully someone a lot more knowledgeable than I will figure this one out soon. Will keep checking the boards. At least we don't have bricks.
I am having the exact same problem as the 1st post but my ipl is stuck on 2.26. I am using an unlocked device and I have no problem downgrading/upgrading the spl. I also get the 326 error when I try to flash back to the original rom. (I used to be able to do this without a problem - I can't figure out what happened.)
It's really weird and I have search and searched and can't seem to figure out a solution.
which SPL you have now?
sorry.... my spl is 1.01
Right. Assuming your device is working 'normally' are you willing to try something new? If so contact me PM
what have you cooked up this time mestrini? lol
my wiz (at 1.01 still..) is doing a-ok, but always willing to go for something new so we can fix this for the communities sake...
d-lite said:
what have you cooked up this time mestrini? lol
my wiz (at 1.01 still..) is doing a-ok, but always willing to go for something new so we can fix this for the communities sake...
Click to expand...
Click to collapse
sorry to mislead you buddy but acmickey got it all wrong and, instead of IPL stuck at 2.26 and SPL 1.01, he has same as you IPL 'locked' at 1.01
So my theory could not be verified.
cheers
have a charmer. I tried to put wm6. but spl and ipl was 1.12. the phone start up and hang when installing some cabs. i restart ir and it allways crashes at t-mobile logo. i updated the rom to aku 3.3. all ok. but continues chashing on t-mobile logo. i try a hard reset. gives me a fat error. I try to put the rom from prophet to try to format it. but that rom upgrade reach 95% and stop. give me a error. this nbf file cannot be used to upgrade this device. I tryed all types of roms. most of them crashes at some point and give me that error. the rom aku 3.3 german and wwe, install perfect. I think that is the only roms I can send to my charmer. but i can´t format whith that rom, fat error. I have 3.08 spl ipl 1.12 because i sent an old charmer rom. ipl downgrade, but spl don´t. do you think my device can be protected?? I dont know that to do more, to bring the charmer back to life. will sd card method work? please help me.
Charmer dead after wm6 update whitout cid unlocking
Hi @all
i have the same problem.
iam stuped and make an wm6 update from ipl1.12 and i have forgot to cid unlock my charmer.
after the update to wm6 all looks like good. the bootscreen from wm6 i have see.
after the reset the charmer hangs at slashscreen.
now i make a update to aku 3.3 ger.
that works but hangs in the t-mobile spaschscreen.
i have tray all downgrading methodes i have read here but nothing works.
jet i have a ipl 1.12. and spl 3.08.
I think only a sd-card rom update works. but i dont have found an sd-card rom to use.
sorry to my bad english.
please can anybody help me?
cu AxelD
Is my phone already dead? Please help me!
Hi, I have a similar may be the same problem!
My phone is a German t-mobile mda compact 2
First I work with “lokiwiz v.02” to unlock the SIM, and it works really well.
Then I installed “Charmer_Touch_ver._2.1” and I could calibrate the screen, and after that Win Mobile 6 installed all the extra stuff automatically. After that the device made a reboot, but it stop at the t-mobile boot screen.
Because the bootload modus is still running, I installed the newest original t-mobile software “RUU_compactII_AKU3.3_38222_382117_026921R_TMO_DE_GER_Ship” but this also didn’t solve the problem.
Hard reset didn't work and always says "Format is
The Start screen shows me this information:
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.22
Is my phone really dead or could someone tell me a trick to reactivate it?
I think noone have a solution for us. I tried to send commands to phone whith mtty. and I can´t send. I don´t know why. so f we cannot send commands the sd card method will not work too. the only olution is to jtag the charmer. but can´t find any pinout information. if anyone knows this informtion, please help.
I aquired recently a second wizard, and decided to upgrade-it.
it had a IPL 1.01 and SPL 1.01...so was a G3. i followed the faria's tutorial, "as i done 100 times with my other wizard"
First i backed up everithing with "WST_v4.2.2"
cidunlocked with lokiwiz
and started with the 2.26 upgrade, and failed a 99% and followed the recover procedure, and tried the recover, but it was allway stucked in splash screen, finaly i flashed in bootloader mode, and sucessfuly recover it, but then.
it had an:
IPL 1.01
SPL 1.01.0001 ?!?!?
so i decided to revert to initial rom...that i backedup.
and with the WST_v4.2.2 tried to restore with the backup, but when i rebooted...nothing happened...just black, and no leds...no battery charge, just a flash on the screen and butoons if i remove the batery, tried with a 100% batery charged, but is the same, so...
can someone tell me what went wrong?
is my Wizard dead?
Thanks in advance.
P.Ferreira
Mmmmm?
Maybe it is!
It seems it has IPL G3
But spl G4!!!!!
Its kinda God damn dead... but does the 1.01 came from provider as the default?
Maybe you skip the step flash buttons rom or upgrade with a G4 ROM...
waiting for other opinions.
+ Que PPC
YEAH ! sure 100% correct there !
Its a mismatch, mixed Bootloaders,G3 & G4,how he got it,only he can explain ?
But,sorry to say,its a dead meat man!
That's why................
zabardast_1 said:
+ Que PPC
YEAH ! sure 100% correct there !
Its a mismatch, mixed Bootloaders,G3 & G4,how he got it,only he can explain ?
But,sorry to say,its a dead meat man!
Click to expand...
Click to collapse
That's why the no id RUU skips the ID of Device, id for IMEI, ID for country... and ID for the IPL and SPL... maybe supporting the Prislav hardSPL for G3 can help us to never again see a wizard G3 bricked Like this...
A minute of silence for the brother's wizard
So sorry men but for the next time re-read please, cause we haven't rom memories in our brains... we have RAM
Thanks for all people. What a sad day......
room for one more in the brick yard?
same thing happend to me , but ipl g4 spl g3
after i ran imei unlocker
i got
IPL 2.21.0001
SPL 2.21
no g3 rom was ever near this device
no hangs no nothing ..100% completed
it comes out this this mismatched IPL / SPL
this is a theory based on nothing ...
when you hung .. i think something got placed in the ipl spl header location
masking or corrupting the IPL / or SPL areas dropping the .0001 from it
yours in the IPL mine in the SPL
lots of bricks out there ... and the phone is out of production
someone should be able to find a service stand or test stand somewhere
just a thought ...
Mmmmm
One more?
Dont you read?
Only possible repair for Wizard is in China, where they exchanges the Bad Flash chip with a repaired one.
Since the JTAG layout is still unknown, nobody can repair it simply by reflashing.