Database Develop

K-Jam locks at bootup

Hi, I bought a new K-Jam, which was fine until I installed the SOTI pocket controller.
From then on, the K-Jam locks at boot (blue screen with I-mate logo on it), and the backlight goes out, coming back up after a few minutes. All the buttons do not work, and the device does not load its software.
I tried a soft reboot and a hard reboot, but nothing works can anybody help?

has you verified SOTI pocket controller is WM5 compatible ?
I think you must make an "hard-reset" :?
regards

AlexSim said:
Hi, I bought a new K-Jam, which was fine until I installed the SOTI pocket controller.
From then on, the K-Jam locks at boot (blue screen with I-mate logo on it), and the backlight goes out, coming back up after a few minutes. All the buttons do not work, and the device does not load its software.
I tried a soft reboot and a hard reboot, but nothing works can anybody help?
Click to expand...
Click to collapse
same probleem here....
how can i stop auto start of the soti software
soti version 5.05

Do a hard-reset, that's the only way I think.

HELP !!!! stuck on windows mobile screen

everything was going fine until i installed blackberry connect, after installation there was a atomatic reset and the phone stopped on the windows mobile screen.
what do i do?
i do have the Kaiser tweak and a few other cab files but nothing major
please help!!!

Hi,
Don't panic!
Just do a hard reset and restore the latest backup you made. You did backup your device right?
Cheers,
Cacti

i have done multiple hard resets(push the little button on the bottom) and never get past the green win mobile screen.
no i havent backed up the phone and really dont care about the stuff on it, i just want it to come back on.

By just pushing the button on the bottom with the stylus you're only doing a soft reset.
You need to hold down the two soft keys on the front of the phone while pressing the soft reset button in order to do a hard reset.

now we're gettin somewhere.
its obviously my first time and i need to know what the send key is
thanks

The send key is the green call button.

hiya, I had same problem, and I've try hard reset and anything else u can think of, there was no way out, I had to ring O2 to seek for help, but they told me blackburry its not going to work on O2 stella ( but I was on dutty's 7 touch rom) , so they replace my phone instead.

Screen alignment problems fix!!!!!!

So i've been having problems with the screen alignment on mine since i had one spot on my MDA screen that was dead and my screen was cracked so the alignment wizard basically got stuck in limbo when I tried to calibrate it. SO basically what I had to do was download PHM Registry Editor and change the registry key touch referenced in here.
kernelguy said:
I then remembered the post from equinoxe that had registry settings for his phone. I took those settings and updated my registry. I now have a decent touch screen - at least the top 3/4 works fine.
The key and settings are:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="1922,1957 3330,639 3317,3276 600,3230 609,677 "
kernelguy
Click to expand...
Click to collapse
Afterwards I used the remote alignment tool (attached) to retrieve the correct settings from the correctly aligned mda(after changing the registry key then rebooting the device) then made sure the file was saved on my pc....normally it's saved by default in the C:\Program Files\Code Factory\Remote Screen Alignment directory. The file was called WIZA200.dat. I did a soft reset then when the alignment screen came up I did the skip function in the remote screen alignment application and it automatically read the proper calibration from the wiza200.dat file and then properly calibrated my mda now my screen is properly calibrated even though i never ran the alignment wizard.
So here are the Instructions folks:
1. Download the latest activesync and connect your mda to your computer and verify your device is connected(not as guest)
2. Perform a soft/hard reset on your MDA then tap your screen to start the screen alignment wizard
3. Download the remote screen alignment tool attached and install it on your machine.
4. Download the wiza200.txt file attached and rename it to WIZA200.dat then put it in the C:\Program Files\Code Factory\Remote Screen Alignment directory on your computer
5. Ensure your MDA is connected to your pc(A green activesync Icon usually indicates a connection )
6. Open the remote screen alignment tool on your pc meanwhile your phone be displaying the alignment screen wizard.
7. Click SKIP in the screen alignment tool.
Assuming everything went fine a message box displaying "The operation has been completed successfully. Your device will be restarted." should pop up on your computer and your device should restart. Afterwards your phone will run the files it always does when you do a soft/hard reset then you touch screen should be properly calibrated and work fine.

thank you very much, this is exactly what I needed, my touch screen is busted
Thanx

OH MY GOD!!! THANK YOU SOOOOO MUCH!!! nothing else worked but this did! you are a life saver!!!!!

es al gud..thank u

an error occured while performing the operation
this is the error I am getting while performing the steps as you suggested buddy..
I don't know whats wrong but my wizard is giving hard time trouble in alignment.
please help
Thanks in advance

it say "the device couldnot found" sth like this sentence but it align my ppc and when it goes into windows mobile when i press anywhere of touchpad it just open start botton
my pocket pc is eten m600 and it`s touchpad broke 1 years ago and i replace with imate jamin touch pad
plz help me

Thanks alot dude it worked

mz4u said:
this is the error I am getting while performing the steps as you suggested buddy..
I don't know whats wrong but my wizard is giving hard time trouble in alignment.
please help
Thanks in advance
Click to expand...
Click to collapse
Did you make sure that your device was connected through activesync before? It has to be connected and NOT as Guest meaning you have to run through the setup activesync does when you first connect a device, for this to work effectively. Also if you're running vista I can't 100% guarantee this will work for you since vista uses Windows Mobile device center and not ActiveSync. If it does then feel free to update this thread.

alihaddadi said:
it say "the device couldnot found" sth like this sentence but it align my ppc and when it goes into windows mobile when i press anywhere of touchpad it just open start botton
my pocket pc is eten m600 and it`s touchpad broke 1 years ago and i replace with imate jamin touch pad
plz help me
Click to expand...
Click to collapse
Again refer to what I mentioned above about it being connected by USB and recognized by activesync.
If not LMK I'll try to help as best I can.

Hello,
I have tried using with "1922,1957 3330,639 3317,3276 600,3230 609,677 " and actually skipped with screen alignment but alignment is not right....bottom part is not accessible...!!! any other correct alignment setting for T-Mobile MDA III....Please Help.
Thanks in Advance.

thx br,,
i solved my align screen problem in kais130,
working 100%

screen alignment.
hey I followed the steps to skip the screen alignment after doing a hard reset and i was able to turn my phone on successfully. However, my touch screen isn't working , i saw you mentioned that after doing a soft reset/hard reset the fone gets calibrated. My phone's screen didnt get calibrated. I tried to do screen align by going into settings but I wasn't able to do it that way either. it keeps tapping the target but it doesn't align the screen. Any idea what my problem could be? I thought that after doing a hard reset, it will resolve the problem. but it hasn't done so. I am out of solutions and I need some help.
I would appreciate if you can reply here or email me the solution at [email protected]
thanks

Greate!
Thanks!

duuude
you are the man!! had been trying all sorts of stuff nothing else worked !!

Excelent!!
Worked excelent, i had an 8125 with touch damaged, but with this i skipped the hardreset issue
thanks thanks thanks

corollatercel said:
So i've been having problems with the screen alignment on mine since i had one spot on my MDA screen that was dead and my screen was cracked so the alignment wizard basically got stuck in limbo when I tried to calibrate it. SO basically what I had to do was download PHM Registry Editor and change the registry key touch referenced in here.
Afterwards I used the remote alignment tool (attached) to retrieve the correct settings from the correctly aligned mda(after changing the registry key then rebooting the device) then made sure the file was saved on my pc....normally it's saved by default in the C:\Program Files\Code Factory\Remote Screen Alignment directory. The file was called WIZA200.dat. I did a soft reset then when the alignment screen came up I did the skip function in the remote screen alignment application and it automatically read the proper calibration from the wiza200.dat file and then properly calibrated my mda now my screen is properly calibrated even though i never ran the alignment wizard.
So here are the Instructions folks:
1. Download the latest activesync and connect your mda to your computer and verify your device is connected(not as guest)
2. Perform a soft/hard reset on your MDA then tap your screen to start the screen alignment wizard
3. Download the remote screen alignment tool attached and install it on your machine.
4. Download the wiza200.txt file attached and rename it to WIZA200.dat then put it in the C:\Program Files\Code Factory\Remote Screen Alignment directory on your computer
5. Ensure your MDA is connected to your pc(A green activesync Icon usually indicates a connection )
6. Open the remote screen alignment tool on your pc meanwhile your phone be displaying the alignment screen wizard.
7. Click SKIP in the screen alignment tool.
Assuming everything went fine a message box displaying "The operation has been completed successfully. Your device will be restarted." should pop up on your computer and your device should restart. Afterwards your phone will run the files it always does when you do a soft/hard reset then you touch screen should be properly calibrated and work fine.
Click to expand...
Click to collapse
Thank you very much!!!!!!!!! thats amazing, you save me from the big F*** with scrren aligment, it perfect works on my omnia damn i love tou

Got a broken LCD, and bought a replacement...
No luck for me... mine is a XDA II Unit...
Or there is another calibration settings for this unit...
Or worst... i bought a non working replacement...

THANK YOU!!!
Thank you so much this worked great on my omnia.
I thought I would be stuck trying to allign the screen until my phone contract ran out!!

omniaconfused said:
Thank you so much this worked great on my omnia.
I thought I would be stuck trying to allign the screen until my phone contract ran out!!
Click to expand...
Click to collapse
Did you have any issues running the program man? For some reason, the program tells me there is an error, to re install it... Ive done it 4 times already, no luck in getting it running. My stupid omina is still stuck on the alignment screen after samsung told me to hard reset it.. GRRR

I just want to say :You save me!You are the god!
I can't express my thanks anymore!Your method help me to acess the operate system when i have a hard reset and can't get over the screen alignment!Soooo you are the life saver!

Stuck at boot screen

I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you

I think you have a hardware problem
Maybe the flex
maybe the microcontroler
maybe the rom Try a new again instead the one you have
for skip this screen alignment try to search on the forum there are many ways
I simply conect it to activesync even if it is stucked at this screen it syncs with your pc via activesync... then go to explore...Windows folder.... startup... and delete the file called welcome.lnk then softreset.

Yeah my wizard is stuck to @ tab the screen etc.
I can't connect to activesync becuase activesync does not detect the phone.
Nevermind!

tnt929 said:
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
Click to expand...
Click to collapse
Try to replace a new battery, i have the same problem be4. And i discovered the battery is bulked. So I go to buy a new one, and problem is gone now.

still stuck
I have the same problem, i tried looking through explorer but i couldnt find the file to delete so that i could bypass this startup. If anyone figured anything out let me know please.
[email protected]
thanks!

1. Do a soft reset. (small hole on the right side)
2. When screen is black hold camera button, this will boot into bootloader
3. Connect USB cable (USB will show over left softkey)
4. Try to flash a new ROM.
I did this process a few times with different roms.. the best I had was using the HardSPL process, and then the NBD_v8.3_8MB rom.

Black screen with backlight

HI every body, I have a problem and I'm asking for help
a while back my HTC HD7 felt in the sea. I managed to get it dried and fixed and it worked fine
but every now and then the screen goes black. normally i fix the problem by taking the battery out
the problem happened again a few days ago, and the screen won't turn on, when I turn the phone on I see the backlights turning on and the touch work fine and I can hear the keys and the unlock screen sound, but can't see anything
I tried to do a hard reset but the volume up key is not working so I can't access the hard reset menu.
my question .. is the a software to do a hard reset via PC. or can I use the headphone volume keys instead of the device ones???
I'm running WP 7.8 official, and a window 7 on PC.
please any help is appreciated ...
thanks