i have a problem with the camera and the phone; i upgrade my XDAIIS to Helmi_BA_WM2k5_AKU3.5_v1.4.CF2; now i have ROM v.5.04.10 WWE,ExtROM helmi_c 1.4 NET2,radio v.1.12
When i try to use camera, i see "failed to initialize camera.Please reset the hardware" the phone can connect to network,but i cannot make any call,after i type a single number it is freezing;
i tried many roms and the same; i tried camera2k5_v1,BA_Album_WWE,etc nothing seems to work
any suggestion?
for the camera search this forum, there is a patch for it.
for the phone you may try to upgrade your radio to version 1.15
i did,it's worse
now i have the radio version 1.15 and i don't have signal anymore to the phone;
the camera still not workng,i used HTC_WIZARD_CameraPatch_
signed_camerapatch_ov9650.sa
htc_camera_drivers -with this last driver i don't see anymore failed to initialize camera,i see a white screen with icons in corners, but still not working
does anyone ever had this problem?
any suggestion is appreciated
after you upgraded your phone did you hard reseted it?
As for the radio, remove the battery, wait like 30 seconds, put it back again. After windows load, soft reset it.
Related
I, have Siemens SX66 GSM ( PH20B) Upgraded to wron version and now it boot with colored horizontel straps (red,green,blue,white) and goes to WM 5, with slow to none functions and also lost radio.
Now I, tried with several WM5 versions and it display error message ( Model ID error 100) Can some one help how to remove / clean it and recomend working WM5.
See some post at the bottom of this topic
If you you have lost the Radio, ie, no version number is displayed on cold booting/hard re-set, then all is lost.
As i had the same problem with a phone I was given to fix.
As most/all of the Upgrade programs Check to see what Radio version the phone already has, and if it cant see one it fails
My only course of action was to get the Phone fixed under warenty
Read all about it here
Hope.......
Mine did the same thing, it was sooooo slow that I was thinking about buying a new unit but at the last breath I did the following and it worked:
- Go to the BootLoader screen (Press: Power Switch+Media Player+Recorder+Rest) all at the same time, your PDA should say “Serial” at the top of the screen.
- Plug you PDA to the cradle and it should read “USB” at the top of the screen.
- Use At least TuMa 1.3 with Radio 1.13.
Note:
The upgrade EXE should load up with a picture of the PD at the left side of the screen that DOES NOT look like your SX66…it looks like an HP PDA…!!!
Mine came back to life but sometimes you might have to SOFT reboot your PDA to get the Radio to work (Hard boot then use a third party software to softreboot).
Good luck.
so using the MaUpgradeUt_noID.ZIP and radio rom only you were unsuccessful at flashing?
Black6spdZ said:
so using the MaUpgradeUt_noID.ZIP and radio rom only you were unsuccessful at flashing?
Click to expand...
Click to collapse
I, went through all upgrades without issue but now PDA is so slow it takes ages to change selections..
have you downgraded back to 03se and still have this issue?
You will have to follow the steps very accurately...if you leave any step out you might end up like me at the beginning when my device was sooooo slow it was useless.
I took these steps from this forum...try it
Best Luck…
Thanks for all help did every thing but still some of menu are so slow that take several minutes to open , still looking for some tips and suggestions or if some one one knows how to turn it back to W2003
I, remoed some of programs from my SX66 that seems to be causing problems and were npt compatible with and got my PDA back...its now working awsome...Thanks for all who helped
When I was using Helmi's 1.3.2 rom (I have since switched back to the latest WM2003 rom) I had some odd, seemingly hardware related, Issues:
*Back light randomly turned on and off, programs opened and closed and did random things, then the device would reboot.
*It would just randomly reboot.
*I would get a "Problem with bluetooth hardware" Error message when trying to scan for new devices some times, and I would have to soft reset.
*I could not turn off the screen in WMP while using A2DP
*The device would shut off completely and wouldn't turn back on occasionally, and the only way I could get to turn back on was to plug it in. After doing that, all the version numbers on the first boot screen would read "NONE" and I would have to soft reset the device several times to get the wireless working again.
I have taken very good care of my SX66 (I have only dropped it once), and these problems worry me...has anyone else experienced these?
I had also a lot of trouble after having installed a new version of WM5, because I forgot to wipe the memory clean (check step 9 - and especially 9.2 - in http://wiki.xda-developers.com/index.php?pagename=Helmi). Just repeating this step will solve it... it dit for me. that's another thing I won't forget anymore
I believe my battery ran dead and i didnt notice, now my when you press the power button the blue o2 loading screen comes on then about 2 seconds later the device restarts and same thing over and over.
If i plug a an ac adpater in (i've tried 2 and an incar charger) the light ring goes up twice then then phone triggers a start up and gets stuck in the loop. I've tried leaving it in this loop for 10mins see if it would charge the battery but no luck.
I have tried doing a hard-reset 3 times now it says its done ok soon as i press vol up to boot it goes into the loop.
Is there anyway i can charge the battery if this is the case or is there another problem thats causing this?
Any help would be appreciated.
Are you sure the battery is dead?
If you left it in the loop for 10 mins I would have thought that it would flatten it such that it doesn't light up at all.
I know the battery was very low before it started doing this and i hadnt installed anything new in months.
Usualy on the o2 screen it shows red writing at the top and bottom, its not showing that right now if that means anything.
Its a stock o2 uk rom with no changes to the radio and official battery.
I've just installed the latest rom from the o2 website (keeping it stock incase i need to send it off to them) and still doing the reboot on startup thing.
Contacted o2 see what they say but if anyone else has any ideas im open to suggestions
i've got the same issue and the battery won't charge ...i suppose it could be a battery issue, but i'd be sure about it prior to buy a new battery..
Battery was fine, i sent the phone to the o2 repair centre got it back week later fixed
SMeK said:
Battery was fine, i sent the phone to the o2 repair centre got it back week later fixed
Click to expand...
Click to collapse
did you use a modified rom? ..i was told htc repairs only unmodified products, could you gimme more information about it?
No it was not a modified rom, default o2 xda ignito rom.
Me too!
I had the same issue. I tried soft-resets, hard-reset, swapping batteries with another phone (even tried warming the battery in my hands which was suggested somewhere!), reflashing a couple of different ROM's, including Shaks 4.30 and the latest Telstra ROM (2.07.841.2 WWE). I tried using MTTY to reflash the ROM, and reflashing using the DiamonCustomRUU.exe from the PC. (OliNex 1.40 SPL). All of the reflashes were in Bootloader mode (hold pwr and vol down) because I couldn't get it to the point of ActiveSync connection.
Nothing would work.
The winning step that bought me the joy (and relief) I was looking for was downgrading the radio from 1.09.25.23 to 1.00.25.05.
Also, I'm not sure if it is related, but I think the reset button under the stylus is stuffed because pressing it doesn't do anything.
Now I've escaped the reboot loop from hell, I'll run it for a few days before giving it back to my boss! If anyone's interested, I'll update you in a few days.
HD.
could you please tell me how you installed the radio, because when I use diamoncotumruu it stays at 0% and the finaly gives an error
yves_the_man said:
could you please tell me how you installed the radio, because when I use diamoncotumruu it stays at 0% and the finaly gives an error
Click to expand...
Click to collapse
I had to install the radio in Bootloader mode (hold pwr and vol down), but there was no issue with the install after doing this. Have you checked this thread? I don't know if that thread will help you fix your issue but it might be worth a look.
What exactly was the error message? Perhaps a search on that error message will help you.
HD.
I've tried it in bootloader mode, but it won't install...
the error number is 262. but that should be an active sync problem but I can't sync so I don't know what the problemm is
Not really on topic, but...
yves_the_man said:
I've tried it in bootloader mode, but it won't install...
the error number is 262. but that should be an active sync problem but I can't sync so I don't know what the problemm is
Click to expand...
Click to collapse
262 isn't an necessarily an ActiveSync problem, more of a connection problem. Try post 9 here. Or try uninstalling Active Sync altogether and installing radio and ROM via MTTY. Since it is a connection problem, you could even try a different USB cable.
But I suggest you post 262 queries here, here, here or here.
BTW, Are you using XP?
HD.
I took battery out to change SIM card and now it won't start.
I get text "Touch Diamond" on the black screen and when it comes to Radio version etc. (red text i corner) it restarts!?!
I tried hard reset but it doesn't help.
Plz help I need my baby back!
Tnx
Try this
I found solution for this problem. If your diamond won't boot go to bootloader mode and upgrade your radio hxxp://modmydiamond.info/index.php?option=com_content&task=view&id=15&Itemid=26 and after that your dimond worked fine without loosing data.
or
forum.xda-developers.com/showthread.php?p=5514067#post5514067
I have the same problem. After a lockup when trying to get the internet sharing to work the phone just keeps rebooting.
I tried to flash a new radi version (from bootloader mode). Everything went OK, but the phone still won't start.
Whats next step? Hard reset?
i have the same problem - i believe it´s battery related
Try leaving your device off for a bit and pull the battery. Then re-insert the battery and plug your device into the ac adapter/charger and charge it for at least 30min. Then turn it back on and see if it continues. Like the previous poster said, you could have a bad battery. Otherwise, flash the shipped rom and then see if it still does it. Then flash back to your custom rom.
Dear buds,
I've bought a TD2 with WinMO 6.5 lately. I had lots of bugs and fixed them all but one...
After some time from bootup (after 1 or 2 hours) the sound of phone goes off without a reason. No sound from speaker, headset or volume control buttons. However everything goes well instead sound. Phone vibrates when get call, notifications and alarms vibrate without sound etc. My only solution to get back the sounds is soft reset. After soft reset everything gets fine...
I think this is a sound driver issue but... If someone to help or show the way on forum please help (because I couldn't find same issue on search)
Thanks in advance.
If there aren't any other programs causing this by adjusting your volume levels, It may be a driver issue and you'll probably have to hard reset.
This is a common issue when flashing a new ROM without hard resetting after.
Dear Bruce,
Thanks for solution suggestion.
I hard reset three times until I bought the phone but nothing changed. I'm using the official shipped ROM and I didn't flash any other ROMs.
Extra programs list:
Klaxon
SKTools Lite
Garmin Mobile XT (Because my Copilot runs only after first installing then crashes forever)
Sportypal
Google Translator
Could that happen because of wrong flashing at factory or service etc.? I mean, this phone is a Vodafone version.
In Turkey, Vodafone signal often goes off and usually my phone gets stuck when the signal is off. Could this be the reason for unloading driver?
The digits of my phone are here:
ROM version: 2.16.468.4 (67041) WWE
ROM Date: 11.12.09
Radio Version:4.49.25.17
The fact that it works for a short while after soft reset perplexes me.
You have verified your volume is on when the sound turns off? (Sorry I have to ask this)
Any other programs running at the time is stops?
GPS software can conflict with system volume and backlight, so maybe make sure Garmin is set to dynamic settings.
Other than that, I really have no suggestions as a hard reset has not helped.
Perhaps hard reset, test for a while and see if it fails w/o any programs. Then install one prog at a time until you find the cause.
There is a slight possiblity that it was a bad flash and the driver is corrupt, which would mean reflashing the stock ROM.
Sorry I couldn't be of more assistance.
Dear Bruce
Sorry for very late answer for your last post
It's sure the phone volume is on
I've been examining the phone for one week and tried some possibilities and still no way for the bug
First I hard reseted again, then didn't install any other programs. After 6 hours, the same issue occured.
I uninstalled CoPilot (which I didn't use after hard reset) then soft reset and wait, just only some hours later, the sounds went off again.
After several soft resets, I decided to play music and monitor if it happens. Then BINGO! The sound went off just after poor GSM signal. When the phone lost the signal, it temporarily locked itself. After 2 or 3 issue, the phone sounds went off.
I think, phone starts a search after signal loss, then it tries to execute rest after 10 or 30 seconds either the signal comes back or not. After some trials it cannot reload sound .dll and sounds lock forever. But after soft reset, everything gets fine again.
To be sure about signal loss, I took the phone in flight mode for one day and wait for the same bug and the second BINGO came Phone didn't show the same bug.
After all, I reflashed the official ROM of TD2 and tried the same things but nothing changed. It's sure that the bug is not due to the wrong flashing the ROM.
For now, I'm sure that the bug occurs because of poor GSM signal of Vodafone in my region. So the question comes
Is there anything (such as a registry tweak or vice versa) to make the phone not to lock itself while loosing the signal and searching? Or do I have a way to increase the signal sensitivity?
Thanks for the worthful answers.
Regards