Newbie to the Forum Help Please - PDA2, XDA IIi, 2020i General

Newbie to the Forum Help Please - PDA2, XDA IIi, 2020i General

I have recently been given a Qtek 2020i however I have not been given any software for it so I cannot install onto my pc. Does anyone know where I can get the os for it.

the OS for this device is embedded on the rom chips inside the device: it doesnt need installing.
in order to access it from a PC (and assuming you dont have any CDs of software) go and download the latest Activesync from Microsoft, install Activesync then dock your Qtek into it's cradle and the PC should now 'see' a smartphone, which can be browsed in My Computer etc.
Joe Pinball

Related

TomTom for my Wizard?

Up till last week I had a T-Mobile MDA Compact and I'd got Tomtom (bakonl) running. Now I have a Wizard (T-Mobile from The Netherlands) and I can't install the Tomtom. Appears that WM2005 not compatible with Tomtom Version 5. Anyone got a plan to get arround this? :?:

To install TTN5 on WM5 you have to copy the cab files directly to pda and launch it with the pocket explorer (or resco explorer).

a bit more info to install tomtom and get it working
http://forum.xda-developers.com/viewtopic.php?t=29606

Thanks for the responses guys. I've given it a go and moved the cab files from the CD to my SD card and installed the GPS cab first. Then soft booted the Vario and then attempted to install the TTN cab.
All per the post :-
http://forum.xda-developers.com/viewtopic.php?t=29277&highlight=ttn
However... Still won't install correctly...
Am I doing something wrong?
Any more advice gladly received.
Thanks,

you need te get the tomtom 5.1 files then it works fine. I've got it working on my bleu angel with WM5, and today i installed in on my brother's vario and it worked just fine.

Thanks,
Can I ask... Where did you get the 5.1 files from?

You can download TTN5.1 from the following link
http://www.tomtom.com/updates/ppcupd510.exe

otherwise just use a torrent search engine, you should find it in no time

dalamario said:
You can download TTN5.1 from the following link
http://www.tomtom.com/updates/ppcupd510.exe
Click to expand...
Click to collapse
You need the zip file not the exe. AS4 messes up the installation.
http://www.tomtom.com/updates/ppcupd510.zip

Dear All,
I found this update this week..
http://users.skynet.be/wallpaper/TOMTOM5.1.zip (for more info see http://tomtom3.web-log.nl/log/856067 around - Mondeo :: 20 september 2005 16:18 -).
Note : Download, unzipp... connect your PDA/Phone via Sync cabel/station, setup.exe run. (I have installed it over my (bakonl) 5.0 version.... !!!).
Note 2 : Can ONLY be used if you have a BeNeLux version of bakonl TT5 and only with the BeNeLux map (normal or plus).......
Success with the upgrade.

TomTom with WM6.1 on HTC wizard
Good Morning,
can anybody support me in trying to setup a navigation functionality on my HTC wizard, that runs WindowsMobile 6.1 (those TNT edition)?
Unfortunately i can't find up to date information about which GPS-hardware to use. Is BlooTooth the only reasonable solution for the wizard?
I also plan to feed the tachymeter signal from my bicycle somehow. Has anybody read of approaches to this and can cite or link?
Third thing I'm in search of is an alternative camera software. The "Camera for Pocket PC Version 3.00" does not support geoTagging and not even writing in the Tags for Titling, commenting etc.
Many thanks for your valuable hints in advance.
blausand

Softick Card Export II PPC on an Qtek 9100 (MDA vario etc.et

for those who use an Qtek 9100 (MDA vario etc.etc) plz try this tool
this tool should be used by any PPC user youll get a smal icon in the launcher wich makes you able to swich between ActiveSync and just memorystick drivers
wich means you can just connect your ppc to any pc (even a mac) and it would been recognized as an usb stick(mass storage device)
plz help the makers debug the tool as they say it should work on the qtek 9100 altough if i try it gets stuck after installing the mass storage driver on my xp machine it just doesnt activate the device in the device manager
maybe we could all follow pewe and post our problems on
http://www.softick-forum.com/viewtopic.php?p=102#102
anyone who would get it to work plz post all info (rom version etc.etc.)

It's working in my device
I have it working without problems.
My device:
ROM: 1.3.7.5. ESN in Spanish
Radio: 01.12.10
Protocol: 4.0.13.23
ExtROM: 1.3.7.105
Cardexport II v2.11b

It's working on mine with no problems as well but I'm using v2.11b, when i use the latest v2.12(edit from 2.21 to 2.12) the USB mode doesn't work.
Imate K-Jam Rom 2.16.9.1WWE

you can use another program called WM5Storage found at
http://www.modaco.com/WM5torage-t238545.html

The latest CardExport (2.12 IMHO) don't work on Wizard. Previous 2.11 acts perfectly.
used it on qtek, tmo, and jam images
greetz

Hi, i had some problem with card export, sometimes it works, after not, a reboot, it works..., but with wm5storage, all is OK and it is free !
Qtek 9100 French rom 2.17

Check out the new v2.15, works perfect with the latest Qtek ROM.
Only thing you have to do after installing is soft-reset, go the the Preferences of the app and under the tab Hardware select "Alt init order" and "Use dumb endpoint" and offcourse switch it to Card Export

Can't Remove Windows WM5Storage
I tried installing this and it put itself inside the accessories folder. It didn't work with my MDA and I tried removing it using Add/Remove programs but it didn't work, the folder is still there. I tried to reinstall it and now I have 2 folders. LOL, how do I get this thing deleted out of my MDA!

SPV m1500!

Hello all...This may be my first post but i have beed watching the forum for quite a long time!You are doing a great work around here!
I need a big favor from anyone that can help!Does anyone have the original SPV m1500 rom provided by orange and can upload it somewhere for me to download?Or can anyone back up his ROM from a m1500 and upload it somewhere?
And i have question as well and i would be grateful if you could answer this one!
If you haven't CID unlocked your phone and somehow managed to upgrade the ROM with a different make's one (i have one from Qtek 2020i at the moment) will it be blocked by the network or is a matter that the person that i bought it from (over ebay) reported it as lost/stolen?Currently everything works fine apart from the phone bit!It says no service and can't detect any network!(it just says ''unable to read setting from the network.Try viewing settings later or disconnect data connection and try again'').
Any help would be greatly appreciated

sorry double post!server had problems!can a moderator please delete one of them/?

Any help pls!??

Hi,
SPV M1500 same as O2 Xda IIi / Dopod 699 / i-Mate PDA2 / Qtek 2020i and known as HTC Alpine. You can upgrade using any ROM that build for HTC Alpine.
Please check at here about all in one sim unlock tool by itsme
http://forum.xda-developers.com/showthread.php?t=240784
Thanks

Thanx clustered for the reply!
I have already used that thread to upgrade my firmware but i am just asking if i anyone has the original SPV m1500 orange rom available?
The thing is i have done the upgrade without CID unlocking the phone!Everything went ok but the only problem is that now the phone in the signal bar has an exclamation mark and says no service!So i was just wondering if it is the upgrade that ''blocked'' the phone bit of the M1500 or is it something else!
Thanks again

after a lot of search i found in a forum someone stating that :
''RIM check the ROM version and RADIO version before they allow you to connect to the relay. If it's not an approved mix, your device IMEI will be BARRED from the relay.''
is that possible and do you think that's why my phone gives the no service message?
Could anyone suggest any solutions to this?

anyone can help??

HTC Alpine as known asSPV M1500 can be unlocked free. I DID IT
THIS IS THE SIM UNLOCKING FOR HTC PH10D:
follow these steps carefully:
Find and download xdadev all unlock.
if you don't find it ,send me an email to [email protected] and I will send it to you.
-Take the SIM card out of your pocket pc and reboot the phone with no sim card,and no memory card.
-Unzip the file on your HTC Alpine and put the file in My Documents or in Storage ,in the pocket pc.
-Run the application.
the application should disply ,UNLOCK SUCCESSFULL and write details of it in a textfile called xdadevunlock.dll
and place it in My Documents.
-Replace the SIM card ,or put a different SIM card into the phone.
-When prompted for unlocking code input 00000000.
-That's it! ...It worked perfectly on my HTC Alpine ,the so called SPV M1500.
-Do NOT run the application again if the phone has succesfully been unlocked!!!!--there myght be bad things;;just check using a different SIM card,or
even two.and then delete it forever.
-Many thanks to the creators of this program!
In the second part I would like to say to people using Windows MOBILE deviceCENTER in VISTA that in bootloader ,neither VISTA neither this Windows Mobile Device Center does Not detect the phone through the USB cable... but only after a REBOOT . Interesting when the screen says '' tap the screen to begin setup your device'' ,if you don't press anything but just plug the USB, the mobile device center detect the phone and you can see the original Windows files in a folder called ''extended ROM'' into the phone.....
...BUT you cannot copy ,add or delete anything...
Does anyone know how to do to be able to add ,delete ,or copy these files???

Problems with .cab installation

Hi,
I bought a Diamond 2 weeks ago in French (v1.37.406.1 FRE) and I started to install .cab applications.
I tried to install :
S2U2 (1.05)
S2V
ESET NOD32 (on official site for PPC)
PHM
psshutxp
Advanced config (the link of XDA)
CorePlayer
none have been installed. The error message is :
The installation of "the_cab" has failed
Click to expand...
Click to collapse
So I do an Hard Reset and I was able to install :
S2U2 (but not the link of XDA)
S2V
PHM (not in the official website)
psshutxp
Advanced config (not the link of XDA)
but not CorePlayer and ESET
So I do an Hard Reset again but after nothing works
I do 2 Hard Reset again and I flashed my original french rom for the french rom in this topic : http://forum.xda-developers.com/showpost.php?p=2344831&postcount=42
the original.
And doesn't work
Where is the problem ?
Thx

nobody ??!?

You sure you have enough free memory to install those programs??.

I have same problem... have several programs that just dont get installed for unknown reason and it is even I chose flashcard also...

try updating ROMs, 1.37 is nutoriously slow anyway so that would definately help in terms of speed, and maybe its a bug on your ROM and you'll kill two birds with one stone, worth a try seeing as you've hard reset and lost your data anyway

I just uploaded all the apps using ActiveSync and it all works... Can someone explain why with USB drive it will copy but not work as it should?
Can we test it somehow?

Did you still have the Diamond connected to PC and acting as a Hard drive if so there was your problem. When it is connected as a hard drive the Diamond will not see the WM device therefore when you are trying to install the program(Cab File) will not be able to install its reg settings to windows. I always disconnect my Diamond from PC after transferring Cab.

buffystar said:
Did you still have the Diamond connected to PC and acting as a Hard drive if so there was your problem. When it is connected as a hard drive the Diamond will not see the WM device therefore when you are trying to install the program(Cab File) will not be able to install its reg settings to windows. I always disconnect my Diamond from PC after transferring Cab.
Click to expand...
Click to collapse
No no... sure I run CAB from the phone after I disconnected... I just upladed this via USB drive and it was making errors (just not working) but If I did same via ActiveSync it is working.
Can you explain this?

Activesync

Help required please. I want to HSPL my phone but i need an internet connection to do that. The problem is whenever i install activesync and connect my phone, the wireless internet on my laptop just don't work even after disconnecting my phone and i have to restore my windows to a time before i installed activesync in order to make my wireless connection work again. Please help me to solve this problem any setting in activesync i need to change to make it work? I will really appreciate your help.

Delete and recreate your sync relationship.
Make sure you select enable wireless connections while sync'd.
Regarding HSPL, have you tried thre manual install first? Otherwise it'll cost you.
Also, with the auto install or installing via RUU.exe active sync will disconnect and only USB connection will remain so it should be able to connect to the network during install.

I have resync many times but my internet doesnt work. It doesnt even work after removing the phone from active sync. The only way to make my connection work again is to restore my computer to a date before installing the activesync. Anyways i will try to connect it through my office computer if it didn't worked again.
And i am installing HSPL for the very first time so pls guide me on this, what's a manual install. I went through this thread
http://forum.xda-developers.com/showthread.php?t=520312
and going to install through this file " Topaz-HardSPL_V5_00R5_183HSPL.zip ". Am i doing it correct? And i dont have to install HSPL 1.33 before installing 1.83, i can start directly from 1.83 right??? And after that i will install the energy ROM through storage card method. Please confirm that i am doing it correctly. Any help regarding this will be highly appreciated.

Not sure about your ActiiveSync issue. So you instsall AS and you no longer can access internet from PC? What OS are you running? If its Vista, you use Windows Mobile Device Center, which replaced AS.
Regarding HSPL, I will be brief in my explanation and point you back to the thread and search for my posts as I have posted instructions there many times, they just get buried in the many pages.
There are 3 methods to flash;
1. Auto Install, where you download the Topaz-HardSPL_V5_00R5_183HSPL.zip and the enablenewrapi. cab, copy and install .cab to your device, sync to PC, then run .exe.
This method will ask you to donate and will not work unless you do.
2. Flash from SD card, you can rename any .nbh file to TOPAIMG.nbh, place in the root of your SD card, enter bootloader mode (search for instructions) and it will initiate the flash.
3. Custom RUU, find and download Topaz RUU.exe, place .nbh file in same folder as RUU.exe, sync your device to you PC and run the RUU.exe.
I use #3 exclusively and have never had an issue, others get stuck at 0% progress an have to soft reset.
I believe you need to flash 1.83, then flash to 2.51 but I am not 100% sure you can't flash directly to 2.51. Do not bother flashing 1.33.
I have provided tools for #2 and #3, #1 exe and cab are available in the HSPL thread.
If you thoroughly read all of my instructions and it does not work, your only option will be to pay through the auto install method and if you encounter issues open a ticket as instructed in the thread.

Thanks a lot. I will try the #3 method. And will post how it went. Thanks again.

I tried both the SD card and manual method and placed the "customRUU.exe" and the "1.83 nbh file" in the same folder in my PC and while activesynced i lauched the cutomRUU.exe but after going into that tri color screen and then into usb mode it just stucks at 0% and nothing happens. I waited for like 5 mins but it just got stuck at 0%. What should i do now?
BTW i have flashed my TD2 with the original ROM update of WinMo 6.5 before.

help
adnanbaig18 said:
I tried both the SD card and manual method and placed the "customRUU.exe" and the "1.83 nbh file" in the same folder in my PC and while activesynced i lauched the cutomRUU.exe but after going into that tri color screen and then into usb mode it just stucks at 0% and nothing happens. I waited for like 5 mins but it just got stuck at 0%. What should i do now?
BTW i have flashed my TD2 with the original ROM update of WinMo 6.5
At me too most
I do not know what to do help please
Click to expand...
Click to collapse

All,
for those who have Windows 7 and run with Office 2010 64bits it's not possible to sync your phone. The solution is to deinstall office 2010 and install office 2010 32 bits. You don't have to save your settings and files, after installing your system find everything incl. account setting
I still had sync problems; the second time i pluged in, my pc did not find my phone. Looking on internet i found the next solution and after trying i must say it works;
Same issues!
Here is what I have done:
Step 1: Connect my Samsung Omnia (SCH- i910) Touch Diamond II to the USB Port of PC. Windows automatically installed driver in device manager called "Microsoft Windows Mobile Remote Adapter." Windows Mobile Device Center automatically loaded.
Step 2: With WMDC running, I can browse all files on device, my storage, and storage card. I have options to add/delete programs. I can sync with Windows Media Player. I can also download all pictures and video files to the PC with a single click!
All this is great but the MOST important thing to me is to sync my Contacts with Microsoft Outlook. When I press "sync", if it hasn't tried to start automatically, the green icon in tray spins, everything looks like it's going to work but nothing. It just hangs there till I finally cancel and exit. Looking through other tips, I read something about windows firewall. I have enabled the recommended entries as well as disabling firewall completely with no results.
Further testing, I can sync mobile favorites if I uncheck all others but still can not sync Contacts. Need a fix!

All,
be also aware of remove hardware, then remove generic serial rejecten.
Regards, John

Windows 7 and Office 2010 can sync with Touch Diamond. First you must setup mail account in Outlook, and it must be default mail client, and then everything can be synchronized. Windows Mobile Device Center is prerequisite 32bit or 64bit version, depending of Windows 7 version
cheers rikee

Database Develop

welcome