have a cingular 8125 that it gets to the bootloader once u power it up, i tried to flash it with the file i download it from HTC America site, it stops at 95% and give me the error message
Error 326: invalid command
the NBF file cannot be used for your PDA phone, please check your NBF file
thnx for help
Obviously , u are trying to flash with wrong rom. Try other rom.Is your phone g4? Try nbd 8.2 .
Hi, I downloaded the "button's 1.05 ROM" and install it in my PPC, but and error occurred saying that this is not a compatible version....
my wizard is G3 with 2.25 IPL/SPL...
Then the phone stand in a screen with the colors red, green and blue.. i try to restart it and then it dont turn on again...
What I do??
Did I brick my phone??
What should you do? STOP SPAMMING THE FORUM for once; man, three posts all with same text.
If you want to fix your phone go read and READ. Then you'll find out what you did wrong and see the way to fix it.
Related
Hi,
I have a problem with my Wizard, my rom update failed because the pc reboots in the middle of the installation and now only the Red Green Blue screen appear with three things, IPL 2.17, SPL 2.17 and in the right top corner RUU.
I can't enter in the bootloader (pressing the camera button and turn on)
What can i do to fix this and update a new ROM?
Thanks in advance.
....... while on that screen plug in the usb cable and re-run the update utility.... Since the RBG screen is the bootloader...
I tried to do it, but i get ERROR[300] : INVALID UPDATE TOOL in the PDA Phone ROM Update Utility 2.00.1
Thanks
is working now. tks anyway
I'm having this same problem... not sure what's going wrong.
msmobiles.com:
Q: If I encounter ERROR [300] : INVALID UPDATE TOOL, what should I do?
A: This error message will appear when you use the incorrect RUU to upgrade. Please make sure you use the correct RUU version to upgrade.
Click to expand...
Click to collapse
Normally, you can only flash an official rom to restore from the point you are at. Once the bootloader is the only thing that comes up, a custom rom will not do the trick.
Once you have the official rom installed, you can then "cross-grade" to a custom rom.
_Nomad_ said:
msmobiles.com:
Click to expand...
Click to collapse
Ok, so using some Italian version is working for me. RUU is the same as the pda phone updater tool right? But something is still going wrong. It says I now have OS 2.26.10.2, which is the molski rom I've been trying to get on here, but neither the ipl or spl change, and the same cingular settings keep loading.
Man this is confusing me.
I have paid to unlock my g4, and I still can't get it to work the way I want it.
hi all,
i uploaded my g3 with this rom Molski.Biz_AKU3.3_21911_8MB_Crossbow.exe. in the beginning everything is normal. it normally finished upgrading. then it restarted automatically, but my g3 didnt open. it shows always bootscreen. ipl and spl both 1.03.
i read almost all forum. when i try hard reset it says "format is ok" but nothings change.
and when i try upgrading with another roms. it gives ERROR 260 NO CONNECTION.
how can i fixed it? pls help me.
read the flashing tutorial..
Start in bootloader
kill activesync *(wcescomm process in taskmanager)
reflash..
BTW WM6 requires 2.X IPL/SPL !!!
If you read almost all the forum, you must have missed a few pages. The reason it won't start up is because you have an IPL/SPL of 1.03. With the phone off and connected to the usb cable, press and hold the camera button and then press the power button. Don't release the camera button until you get a 3 colored screen. That's the bootloader. Now flash an official ROM such as T-Mobiles 2.26 to get your IPL/SPL to at least 2.xx (if you flash T-Mobiles ROM they will be 2.26). After you do that you can flash Molski.Biz's ROM or any other ROM of your choosing.
I just want to add to all the correct things said here that sometimes "No Connection" errors come from low voltage battery. Be sure to have it fully (or almost) charged!
xeno1 said:
If you read almost all the forum, you must have missed a few pages. The reason it won't start up is because you have an IPL/SPL of 1.03. With the phone off and connected to the usb cable, press and hold the camera button and then press the power button. Don't release the camera button until you get a 3 colored screen. That's the bootloader. Now flash an official ROM such as T-Mobiles 2.26 to get your IPL/SPL to at least 2.xx (if you flash T-Mobiles ROM they will be 2.26). After you do that you can flash Molski.Biz's ROM or any other ROM of your choosing.
Click to expand...
Click to collapse
i did all what you said. ecxept trying the t-mobile 2.26 rom. coz i couldnt find it. i got 3 colored screen and i tried another rom and it gives sama error (260 ERROR) it is look like has no connection so rom update couldnt find ppc
Look here for T-mobil 2.26
http://forum.xda-developers.com/showthread.php?t=310831
no it didnt work. as i said when in 3 colured screen, there is no connection between my computer and ppc. so it always gives same error: ERROR 260. it says "no connection" check usb cable etc.
by the way there is no problem with usb cable.
i think there is another method to rom update. can i copy any rom to my sd card by using ntrw.exe.
do you think it is work. if it is so, can anyone explain me details
thnx
hi forum members(people who have the best knowledge about pocket pc).
i dont know what i did but my wizard is working now. i did what i alwyas did before, i mean in serial mode i tried to update wizard, today i want to try again then it is ok.
thnx for helping....
hey, im new to all this, the tutorials dont make sense to me, atm i know my device is:
-tmobile mda vario
-unlocked
-G4
and is rom verion 3.8.2.1 wwe
i tried to upgrade it with SNN Diamond edition, but when ever i tried this, i got to the part where it starts to flash, the mda vario screen goes to the screen with the three colors but then on my laptop it just crashes and seys something about it is not responding and you have to close it, i have tried with other roms, but same thing occurs
can someone plz help meee
use softspl
ok thanks, will it work with unlocked pdas?
need help agen lool
i tried updating the rom with TNT,19213 professional
and error [300] invalid update tool occured
it says this update utility cannot be used on your pda phone.please get newer update utiltiy plz plz help
You have to use SoftSPL, you can get it HERE
In this folder, you copy the "nk.nbf" of your favourite WM6 (and only this file), then start with "START-sSPL.exe" (make sure you're connected via ActiveSync).
When you read this here before, you know everything you need!
Probably you are not following the instructions and doing it correctly,try to go according to the guide,if it still doesn't work,it sometimes happens that SoftSPL fails,than you better do it through 'HardSPL'
sorry if this post seems to be a repeat , but i tried the search option and the results were not fruitful
a friend of mine , while trying to upgrade to a TNT ROM , didn't HardSPLed the device first , and successfully changed the ROM of the device , now it is stuck on the blue screen with SPL and IPL versions , and no response . for some reason , the device can go to bootloader mode , but it can not be reflashed , and it does not respond to a hard reset command.
please advise on what to do
regards
When it is in the bootloader mode, and connected via USB, is there a little USB icon in the bottom left? If so, simply flash your phones carrier ROM and all should be fine with it again. You can then apply HardSPL and flash to the TNT or any other ROM that you want to. Is your device a G3 or G4 by the way? What are the numbers after IPL and SPL?
well my friend says that the USB icon is visible there , and the device was indeed a G4. the thing is , what exactly should he do , in order to flash the ROM , since non of imate roms work for it. should he use any special software?
i'll greatly appreciate your help
Is he using Vista or XP?
he is using Windows XP , could it be the PC OS that caused interference?
Well, only if it is Vista does it really matter. He needs to get ahold of an original carrier ROM, such as the O2, or T-Mobile one and flash it to his phone, then HardSPL it, then upgrade to 6 or 6.1.
Download and flash Wizard_love Rom,it might do the trick,then HardSPL and upgrade to any wm6 or 6.1 rom.
What exact error it gives while flashing imate official rom ?
well the wizard has been an imate ,and it was flashed with an Original imate ROM already , but no success , any other suggestions?
thanks again
error [294]invalid vendor ID :
This Update Utility can not be used for your PDA phone.Please check your update utility.
here is the picture
http://i35.tinypic.com/29v03rl.jpg
and could you please give a link to the Love ROM?
thanks
Download wizard_love Rom from this link:-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
No SD Upgrade even tough... MTTY hahahaha
king_dani said:
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
Click to expand...
Click to collapse
It seems you need to follow the drugstore MiniSD upgrade but...
I guess you dont have another wizard to make a bacuk up... so wait a minute...
You don have hardspled yopur device...!!!
HAHAHAHA forget it!mmmm
Maybe mtty... folow mi signature maybe works
See you There Men!!!!
Hi @ all,
**** happens, yesterday i tried to upgrade my rom on charmer (mda compact 2).
During installation system hangs on and didn´t finish.
So now i have only the startscreen and can reach the bootloader.
Tried now to flash an original rom, the ruu says error 294 invalid vendor id.
Otherwise the ruu (for no id) ended with error 238 file read.
My bootloder shows IPL 1.12, SPL 1.12 and USB connected.
I have read a lot of threads but cant find a answer for that.
Has anyone a good idea?
Thanks a lot for helping.
I wish all users in that great forum a happy new year
ronni
Hi Ronni,
same problem here. Do you found any solution?
Is it right, that your Device not charging and USB is not recognizing too?
Bg
Joy
Are you trying to flash WM6 ROM to your charmer? Because WM6 required IPL and SPL level at least 2.xx.
Did you tried this method to bring charmer back to life?
wow, thank you for your quick response. Hmm, I´m not shure, it´s a PDA from a Collegue, I don´t know, what he do with it. (I know only he try to flash something) Next week he take it to our office, then I try your solution
Thank you again
Joy
Bootloaderhang
Today i tried to update my rom... while the update i had an error.
i had updated the http://forum.xda-developers.com/showthread.php?t=363882
after the hardreset the phone hang by the first screen. I can press everething but nothing happens.
now I tried to flash a nother rom but it is unpossible because it can´t connect with windows mobile center on the pc.
Has anyone a good idea?
Thanks a lot for helping.
I wish all users in that great forum a happy new year
didi500