Database Develop

Flashing to WM06 - newbie questions

Hi all,
sorry for the newbie question but I'm thinking about upgrading my Trinity to WM06 and wondered if anoyone could answer some basic questions as I'm a bit confusted (... not that techie I'm afraid)
1. As my device is a SIM free, non network attached HTC P3600, do I need to do any of this "Hard-SPL" upgrading before selecting a ROM
2. is there a simple step - by - step flashing guide for newbies like me anywhere
3. Do the ROMs provided here enable SDHC for the device. I want to use higher capacity mini SD cards - this is a really important requirement
4. I love the inbuilt GPS and Tom Tom solution - are there any issues with GPS/Tom tom support in the upgrades
Many thanks in advance
Coe

coe62 said:
Hi all,
sorry for the newbie question but I'm thinking about upgrading my Trinity to WM06 and wondered if anoyone could answer some basic questions as I'm a bit confusted (... not that techie I'm afraid)
1. As my device is a SIM free, non network attached HTC P3600, do I need to do any of this "Hard-SPL" upgrading before selecting a ROM
2. is there a simple step - by - step flashing guide for newbies like me anywhere
3. Do the ROMs provided here enable SDHC for the device. I want to use higher capacity mini SD cards - this is a really important requirement
4. I love the inbuilt GPS and Tom Tom solution - are there any issues with GPS/Tom tom support in the upgrades
Many thanks in advance
Coe
Click to expand...
Click to collapse
Hey there, coe62!
I'm not a techie myself, but have just recently flashed my Trinity for the first time to WM6, so most of your questions were mine also. Here:
1. yes. From what I understood, also protects your device from a bad flash helping you recovering it (as far as I know, there are three of them: OliPro's HardSPL 1.30, OliPro's HardSPL 1.20 and Des' Crash Proof SPL)
2. http://www.trinityguides.info (thanks to racerx_)
3. some of the do, some of them don't, check here for details: http://forum.xda-developers.com/showpost.php?p=1635483&postcount=5
4. using iGo, so I can't tell!
Best of luck!

iGo
hi tnyynt,
i've seen u are using iGo, and also seen the small flag in the corner....so let me say first "salutari". as i'm new user of a trinity and have the german wm5 (my german sucks), i will flash it to wm6 english but i don't know if iGo is working with wm6. is it iGo os dependant?
thks!

mardare said:
hi tnyynt,
i've seen u are using iGo, and also seen the small flag in the corner....so let me say first "salutari". as i'm new user of a trinity and have the german wm5 (my german sucks), i will flash it to wm6 english but i don't know if iGo is working with wm6. is it iGo os dependant?
thks!
Click to expand...
Click to collapse
Hey there!
YES, iGo works very well on both WM5 and WM6. I had it with the stock WM5 and now using it with a cooked WM6, it works great on both operating systems.
Noroc!

hi there
Am as a newbie as well, lately i've been tried flashing pretty man ROMS over Trinity Windows Mobile Section 6, and find out some ROMs are really good, smoothness, fast and damn good performance, or you can try Mary(latest ROMs). Personally, after trying cooked ROMs, i found Only _AX3L_WM6_WWE_v3.1.2c FULL & LITE (25-10-07)
This ROM is simply an edited version of the Official DOPOD's ROM (lastest released version!) for the Trinity work on my DopdD810, what i mean is with this ROM i can get connected with Internet, but rest of other ROMS don't, i've no idea Why, i am from Hong Kong, somebody has idea due to connection to the internet??
Ok, due to my bad understanding which SDHC would be most suited for my device? As i read about
http://forum.xda-developers.com/showpost.php?p=1635483&postcount=5
for ROMs flashing i follow the instructions, so far without serious errors happened, i'd to thank all of you, no matter newbies, seniors, moderators...

hi!
that's great, thanks. hopefuly i'll have time in week-end to play around and flash it!
numai bine!

Well i use this thread to post some of my questions...
i get my p3600 tomorrow and i'm very excited, so i want to flash the WM6 from bepe.
1. is there any way to backup the factory-flashed rom?
2. do i lose the warranty if i flash the device? is there a workaround?
3. I've read a few threads but i cant get an idea whats this hard spl for?
4. is it possible to reset the p3600 to factory default so may i can get warranty if somethings fails?
thanks for the replies..

Hi guys,
I want to upgrade my phone to one the WM6 roms available in here.
I just wanted to ask will the sms / email / mms settings stay once the new ROM has been flashed.
If not where can i find them to write them down.
Thanks in advance.

no, they will be erased...
take a look at the trinity upgrade guide on trinityguides.info which will take you step by step through flashing your ROM (backup, hard spl, flash ROM, restore, etc)

Erase the ROM before installing?
I heard it's better to erase the ROM before installing a new one.
A kind of a 'super' eraser to clean deply the ROM. Have you heard of any of such a program/utility?
Thanks

connetion problems
hi
i tried to get all steps like on trinityguides.info but always the same sh....
ERROR[260] : CONNECTION
1.the USB cable IS connected to PDA
2.also at hte PC
sync is done and i get always the same, doesn´t mater what i try
- HardSPL
- ROM flash
has anyone an idea? i just want to have a german wm6 on my 3600. later on a can install TT on the "normal" way.
thx for any help

Some questions

Hi!
After installing the HTC Toupad on my Kaiser, I have experienced big problems. Letters on the Keyboard (QWASYX) didn't work and even the onscreen keyboard didn't recognized these letters. So I decided to uninstall the application. But now I have other problems with my Kaiser and so I decided to Hardreset my device. But before I do this, I want to upgrade my Kaiser to WM6.1 and update it to the newest ROM/Radio.
Now I have some questions relating to that.
As a result that I am a Super Moderator in another forum I know that it is bugging if people don't read the Wiki/FAQs. I have read them, but I don't understand many things :-|
I have handled it to unlock my device, but when I was reading about updating to WM6.1, I saw only things like: "... works only with 6.1", update this, update that, and I don't know in which order.
First of all: Could anyone explain me how to update my Kaiser to WM6.1 and the newest Radio?
Secondly: What is this Duty FW? Is it a modified Rom with added apps?
Finally: I have a normal Kaiser. Not a Vario III, AT&T or something like that. Just the austrian version of the Kaiser with no brandings and so it would be good to have a Firmware without any brandings.
Thx in advance.
BTW:
ROM version: 1.56.405.5
Radio version: 1.27.12.11
Oh, I have forgotten one thing: Is it possible to change the LED blinking in the Phone Mode? To change it from green to blue?

The letter problem you were having was a simple fix with a cab that can be found all across this forum. All the ROM's can be found in the ROM Development forum and as far as what has been changed, modified, added, programs list, can all be found in the FIRST or SECOND post of each of the ROM's. So you will just have to read through them and find one that suits you best as they all have something different. Most of the radio's that can only be used on 6.1 ROM's will say "Will only work on 6.1 ROM's". And I would like to add even though you don't have at&t DON'T FLASH THE 1.65.17.10 RADIO.

KDKobes said:
The letter problem you were having was a simple fix with a cab that can be found all across this forum. All the ROM's can be found in the ROM Development forum and as far as what has been changed, modified, added, programs list, can all be found in the FIRST or SECOND post of each of the ROM's. So you will just have to read through them and find one that suits you best as they all have something different. Most of the radio's that can only be used on 6.1 ROM's will say "Will only work on 6.1 ROM's". And I would like to add even though you don't have at&t DON'T FLASH THE 1.65.17.10 RADIO.
Click to expand...
Click to collapse
Ok, thx first of all. Dutys rom sounds nice. What do I have to do first? It is still a little mystery for me ^^

alcbottle said:
Ok, thx first of all. Dutys rom sounds nice. What do I have to do first? It is still a little mystery for me ^^
Click to expand...
Click to collapse
You need to make sure before you flash a rom on to your kaiser that you flash hardspl - http://forum.xda-developers.com/showthread.php?t=334679, and than after successfully installing that you can flash the rom of your choice. Please read the first sticky thread under the kiaser rom development form - http://forum.xda-developers.com/showthread.php?t=369282; it has all the info you need pretaining to everything involved when it comes to flashing your kaiser. I strongly recommend you go through it and read the posts it points to that are relevant to flashing.
Once you have done that it is pretty simple process; just do yourself the huge favor and don't flash until you have flashed hardspl or you will brick your phone.

If its still a mystery I would start here http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
No pun intended.

@thesire
I have already installed HardSPL. Otherwise I couldn't have unlocked my device with this method: http://forum.xda-developers.com/showthread.php?t=361039
I have used just the Sim Unlocker Method. Not the Kaiser SIM/CID Unlocker & Changer
That's the reason, why my mobile phone is now with an english language
Just one important question: Do I have to change my current radio for the new Duty Release?
@KDKobes
Why shouldn't I flash THE 1.65.17.10 RADIO?

Some ROM's come with radio's some don't. Most of Dutty's ROM's come with radio's, but if you want to keep your radio then I would suggest finding a ROM without a radio in it or making sure yours is compatible with the WM 6.1 and reflash it back. The 1.65.17.10 radio will lock your phone to that radio only and you will not be able to change it until somebody can fix it. Alot of people are stuck with that radio now and can't change.

Blackberry Connect - bbconnect - on Touch Diamond

Hi All.
So here we go again - trying to get Blackberry Connect to work on a new device..... so we've succeeded on the Kaiser and Touch Dual with both original and cooked rom's but I can't get any version to work on the new Diamond - received mine yesterday after frying the mini usb port on my Touch Dual and its one of the 1st things I installed? I've tried all the current fixes (I think) most of them summarized here in Elec.Two's post:
http://forum.xda-developers.com/showthread.php?t=371652
I'm hoping there will be a few others out there working on the same problem - I've just changed my aku back to .1.1.4 - I can get the device to sync when connected using activesync as a pass-through connection but get the "old" data tunnel available message and then it flips to "not connected" .....
I'll keep trying and keep this thread updated but could really use some help!

Hi, Im trying to change the name of this. I would like to change it to HTC-Herm200 or someting else. But I dont know what the build number have to be there. Anyone know ?

this has NOTHING to do with rom development... use some sense people! moving thread!

ROM Development????
Not sure what usap 's post is all about but my question is very much about ROM development? I'm looking for a registry change that will fix the problem that the CURRENT STOCK ROM has that means that bbconnect will not work?
I currently have WWE_1.34.831.1_52.24.25.08_0.93.25 loaded and have tried the standard "Tweaks" from past "ROM Development" but none have worked so far? I'm on constant watch for another ROM release (Cooked or Stock) or a Registry fix to help solve the problem?
ShogunMark - do you really think the thread was in the wrong place???? If its not ROM development then I'm in need of some guidance?

Im tying to change in HEX Editor the Signatures. For example there are DIAM100 (or DIAM10000) and build 19588. I changed it to HERM200 and 19588->17745. I can change it without changing the size of .nbh. But thre are "Diamont" Signatures too and by changing Diamong->Hermes wir have one less character (7->6). It changed the size of the .nbh.
So im trying to flash it to the Diamond nad about 96% OK, but then ROM flash error.
A meaning of it all is that it have to work, because RIM asks the Number and NAME and then when its in the list->OK, NO->pending.
I need some tools like SSPL 1.34 and ROMUpdate Utility that dont asks of CRC or something else.
Please Help

I've seen a few members reporting that they have a later ROM version > 1.35.707.3 - See thread http://forum.xda-developers.com/showthread.php?t=394985&page=12 I have not been able to find this as an officially released ROM and I'm not aware that its been dumped as yet? This slightly newer ROM may help solve the problems and may help usap with his question on the version number?
If there's anyone out there who know's the AKU and the version number for ROM 1.35.707.3 can you let us know???
Thanks

Blob8me said:
Not sure what usap 's post is all about but my question is very much about ROM development? I'm looking for a registry change that will fix the problem that the CURRENT STOCK ROM has that means that bbconnect will not work?
I currently have WWE_1.34.831.1_52.24.25.08_0.93.25 loaded and have tried the standard "Tweaks" from past "ROM Development" but none have worked so far? I'm on constant watch for another ROM release (Cooked or Stock) or a Registry fix to help solve the problem?
ShogunMark - do you really think the thread was in the wrong place???? If its not ROM development then I'm in need of some guidance?
Click to expand...
Click to collapse
he moved the thread as it WAS in the wrong place, blackberry connect isnt related to Diamond ROM Development.
Yes you have to Hex edit the ROM to get it to work, but it doesnt belong in that forum, and to your other question the newer build of ROM is not a newer AKU or build.

walshieau said:
he moved the thread as it WAS in the wrong place, blackberry connect isnt related to Diamond ROM Development.
Yes you have to Hex edit the ROM to get it to work, but it doesnt belong in that forum, and to your other question the newer build of ROM is not a newer AKU or build.
Click to expand...
Click to collapse
I disagree - for most every other device - getting bbconnect to work has been the result of ROM Development - if your familiar with the other device forums - you'll see that Blackberry discussion is often linked with and found in the ROM development forum?
HOWEVER - I dont really care which thread it sits in as long as "we" can work on a solution if there is one available?
FINALLY - Thank you for the information on the Malaysian ROM

Blob8me said:
I disagree - for most every other device - getting bbconnect to work has been the result of ROM Development - if your familiar with the other device forums - you'll see that Blackberry discussion is often linked with and found in the ROM development forum?
HOWEVER - I dont really care which thread it sits in as long as "we" can work on a solution if there is one available?
FINALLY - Thank you for the information on the Malaysian ROM
Click to expand...
Click to collapse
yes the ROM needs to be HEX edited but it has nothing really to do with the "development" of a ROM .
so when we get HardSPL ready and installed i will show everyone how to hex edit the ROM NBH files and then reflash it so bb connect can be used.

Blob8me said:
Not sure what usap 's post is all about but my question is very much about ROM development? I'm looking for a registry change that will fix the problem that the CURRENT STOCK ROM has that means that bbconnect will not work?
Click to expand...
Click to collapse
I'm not sure who to agree with...it really shouldn't matter so much to people.

Dark Fire said:
I'm not sure who to agree with...it really shouldn't matter so much to people.
Click to expand...
Click to collapse
Agreed - It shouldn't matter and here it will stay
I'm hoping for a tweak to the stock ROM (or even a "fixed" stock ROM to be released as I've heard that a next build Rom is due soon - and this has neen the main reason behind the delay in the UK and EU formal release??? Apparently - despite the popularity of "our" site less than 5% of device owners actually change anything on their phone never mind update firmware - official or otherwise? HTC are trying to minimise "support" issues by ironing out as many bugs before the next release - I know for a FACT that they use this site as a major test ground for any new device - so maybe the expansys release was intended after all???)
Thanks again.....

Blob8me said:
I'm hoping for a tweak to the stock ROM (or even a "fixed" stock ROM to be released as I've heard that a next build Rom is due soon - and this has neen the main reason behind the delay in the UK and EU formal release??? ... I know for a FACT that they use this site as a major test ground for any new device - so maybe the expansys release was intended after all???)
Click to expand...
Click to collapse
Yep, all of the evidence suggests that that's the reason behind the delayed release in Europe. New ROM. Hopefully with none of the bugs we've found so far (but I doubt it).
And that's a really interesting fact. It would be both nice and worrying to know that we influence them. (Nice when good devices like the Touch Diamond are announced, but worrying when there are major problems, such as that big driver problem).

Offtop (maybe)
I was playing yesterday with another phone and became the ROM extracted. So Registry and some of the files have the name of it in it. And I changed it to another name (Herm200 and HTC-HERMES) so that after the recreating and flashing the ROM it was everywhere Hermes. But PHONE ROM was dead (No signal, no phone). There were some imei*.pfg and some *.rgu and *.dsm where I changed all to HTC-HERMES and HERM200. So I had to flashing it to normal ROM.
And by the Diamond i worked with not extracted ROM. So i think there are 2 roads to change it: in extracted and not extracted ROM.
What do you think about it?

UPDATE on 1.34.831.1 and bbconnect?
Have just tried all the usual routes with the new EU Rom (details below) having used OliNex's SPL to Flash:
ROM: 1.34.831.1 WWE
Date: 5/25/08
WM6.1 CE OS 5.2.19588 (Build 19588.1.1.4)
Radio: 0.93.25.NS16
Protocol version: 52.24.25.08H
Still no success..... I've seen that there are other Roms also out there such as 1.35.871.5 but not yet available?
I was hoping that the Stock EU Rom would be OK as in the past the Stock "Official" Roms have run bbconnect with no changes and no problems???
If anyone has any other suggestions then your help would be greatly appreciated?

UPDATE ON Elite 1.0 and bbconnect....
Still nothings working - Sigh.....
I've got a specific request in the main Elite 1.0 Rom thread for walshieau to add bbconnect support now that HSPL is released - so hoping it wont be too long now!

walshieau said:
yes the ROM needs to be HEX edited but it has nothing really to do with the "development" of a ROM .
so when we get HardSPL ready and installed i will show everyone how to hex edit the ROM NBH files and then reflash it so bb connect can be used.
Click to expand...
Click to collapse
walshieau - any news on working on a solution now that we have HSPL out???? Can you add bbconnect compatability to the next Elite release????

UPDATE on 1.37.405 and bbconnect
Just added a comment on the main thread for this, the latest WWE EU Rom Release...... still not playing....
USAP - Any more thoughts??
walshieau - come on - you promised to help with a solution.....??? Help me out here????

Refresh......
Just refreshing as I'm getting desperate for a solution as I use the blackberry function for work and really don't want to switch back to my touch dual - has ANYONE had any success on the diamond with bbconnect?

Another "post" refresh.....
I'm still struggling to find a solution for this....???? In fact, I'm starting to wonder if there is a solution at all? Has anyone had any success at all with installing blackberry connect on any of the diamond Roms?

Blob8me said:
I'm still struggling to find a solution for this....???? In fact, I'm starting to wonder if there is a solution at all? Has anyone had any success at all with installing blackberry connect on any of the diamond Roms?
Click to expand...
Click to collapse
me waiting for a solution also. from what i notice, we just need 1 carrier to support bb on the diamond n we r all set. currently this is what i hav experience with the touch n touch dual which i have been able to connect despite local carrier not supporting it.
give a shout out if u do come across a solution though.

Where to start?

Ok, some of you may remember me from the Wizard world. I am the chef for the "Jag" series and "NTS" of roms there. They are old roms I know, but then i decided to be stupid and went to the SP world with a Moto Q9h, 6 months in, I miss my touch screen. I have an AT&T Tilt on the way now. So, to the main point of this post.
Where do I start with unlocking the Tilt, and also, Since I am on AT&T what is the deal with the radios. I know I want to use a non standard ROM on this phone since bloat ware pisses me off.
How do i determine what radio with what rom and so on?
Thanks for your help. I have tried to search the forum for answers but I am totally lost here. Guess I need to leave behind the world of the Wizard and one radio for all roms. LOL.
I missed you guys!!!!

Re the unblocking I think that id the CID Unlock guff you have to run (don't quote me, my phone was already unlocked)
Then read the pages on flash tutorial which turns out to be easy to do and then pick a ROM to flash and away you go

Wow 738 posts and you don't know how to read stickys.
Check the links in my sig (and just about anyone elses) or the sticky in just about every forum for the kaiser.
welcome back.

Ok, So just to test my understanding, I need to check each ROM release and see which HardSPL they used to make the ROM.
Example:
The Garmin.DK.1 WM 6.1 Premium ROM states the instructions are to install HardSPL 3.56. I have read how to do this and it seems pretty self explanitory in the instructions. After that, then I flash the rom, once the rom is complete, I do a hard reset on the phone.
Am I correct in those steps?
Now, my next question.
I have read here in the wiki that I need to ensure that I am using the correct Radio for my phone. Confused here a little bit.
Dutty's WM6.1 Hybrid v2 has this little disclaimer on the second post,
There will be 3 roms compatable with the latest AT&T Radios 1.65.14.06 and Radio 1.65.17.10
Click to expand...
Click to collapse
Does this mean I have to hunt down a specific version of the radio in order to use this ROM?
Thanks again for the help.
738 posts does not mean I should know how to read a sticky. Most of the stickys on the Wizard forum werent stickys when I read them....
And I have worked with alot of the authors of those stickys too.

There are a few things you want to do:
First, install a hardspl I would recommend 3.28, 3.29, or 3.56
Second, security unlock your device
Third, Flash a Rom. A majority of the rom's here come with radio's. The best radio's available right now are 1.65.20.29 (great with getting a quick gps fix and fairly stable) 1.58.25.17 (which is compatible with almost every cooked rom here which offers great battery life and fairly stable reception at least in my area) or the newest available radio which is in my signature (offers decent gps fix, great reception and a decent battery life.
It is easier to learn as you go rather than attempt to cram it in all at once.
Good luck

Thank you red.
I just dont want to brick my tilt first attempt. I guess what im looking for is a quick rom, very stable and has no bloatware.
I think iwill work on the device with standard rom first so that I can learn the device itself. Then i will start reading rom release posts...... every page.
I like to have all info before i take the first step. expecially on something this expensive.

Got a New Diamond. Where to start ?

So I just got my new Diamond (Hong Kong traditional chinese version), version below:
ROM: 1.37.832.4 CHT
Date: 06/23/08
Radio: 1.00.25.03
Protocol: 52.26a.25.09H
I wanted to get the most out of the little phone. What tweaks and fixes I need to do to get to everyone elses "standard" ? Such as updating, changing the language to english, some kind of ways to backup my old ROM, speed fix on the menus and navigation, tweaks on longer battery life Also tell me if there is more needed.
Can anyone tell me where to get those stuff (Or if those things exists) ? I would greatly appreciate it.
Thank you very much !

update to WWE rom and flash the radio, use the roll up stickies as tutorials at the top of the pages, read, search and you will find.
no one here will want to find it for you. open your eyes and take a look around. its all here.
end of topic.

Blazeitup123 said:
update to WWE rom and flash the radio, use the roll up stickies as tutorials at the top of the pages, read, search and you will find.
no one here will want to find it for you. open your eyes and take a look around. its all here.
end of topic.
Click to expand...
Click to collapse
Hey, I am new to this and I don't have the slight understanding of how these things work. That is why I'm asking for help. I wouldn't want to install the wrong things and kill my diamond (It happened before with my PSP =/).
But thank you for answering. Is updating the rom and radio all I need ?

Blazeitup123 said:
update to WWE rom and flash the radio, use the roll up stickies as tutorials at the top of the pages, read, search and you will find.
no one here will want to find it for you. open your eyes and take a look around. its all here.
end of topic.
Click to expand...
Click to collapse
Ouch, harssshhh.
To the original postah... Search for "Diamond Tweaks", should be a sticky in this forum. Those should help a lot for the performance of your Diamond. You CAN flash a new ROM and radio (make sure to Hard SPL first, search on how to do that!) but it's not necessary and taking a risk... Not a very big one, but devices have been turned to paperweights from flashing messups many times. To keep it basic use those Diamond Tweaks, start your device off right with Schaps Advanced Configuration tool (www.touchxperience.com) and TF3D Config, maybe Diamond Tweak (a program called that, searchsearchsearch) as well. To get a registry editor you can also go to touchxperience.com, you'll need that for most of the tweaks. Now go, go, go!

Thanks for the answers.
I have decided to flash the Rom cause I wanted to get the best out of the phone.
I come across this guide on flashing: http://modmydiamond.info/index.php?option=com_content&task=view&id=12&Itemid=26
And this for list of Rom: http://forum.xda-developers.com/showthread.php?t=413910
The problem I have now is that I don't know which Rom is the best to flash into. And whats the difference between Offical and Cooker rom (Which is better)?
Again, thanks for answering. I appreciate it.

each person have different prefrenses and use their pda's for different things
which is why there are more then one rom called superrom which everybody use
so it is kinda hard to answer the question which one is best for you
trying various is most likely the best path

Rudegar said:
each person have different prefrenses and use their pda's for different things
which is why there are more then one rom called superrom which everybody use
so it is kinda hard to answer the question which one is best for you
trying various is most likely the best path
Click to expand...
Click to collapse
Yeah there is alot of them. =/
I'll try them out.
But can you tell me if the cooker ones are better than the offical ones ?
And is this the official English Rom: RUU_Diamond_HTC_WWE-ME_1.93.456.2 ?
Thx !

smashhell said:
Yeah there is alot of them. =/
I'll try them out.
But can you tell me if the cooker ones are better than the offical ones ?
And is this the official English Rom: RUU_Diamond_HTC_WWE-ME_1.93.456.2 ?
Thx !
Click to expand...
Click to collapse
...better? They are newer; look: Just like in Windows XP Microsoft also generates new builds of windows mobile. Also HTC does this with his own applications. The cookers always takes the newest builtds and gave us the great roms!
ok?

Just look at it like this, cooked roms are customized by people on here that want better performance, the official roms are what HTC puts out to try and make it work for everyone. If you find a cooked rom that works for your needs, it's likely to be better because it doesn't include all of the stuff that doesn't interest you. Better yet, you could cook your own rom if you really want to, look for a tutorial on it. Not incredibly difficult, just takes some time to learn. (This is my perception of it, I've never cooked a rom myself but it doesn't seem so impossible)

Thank you guys, I chose the SwiftBL for the Rom since it have just what I need and much more.
But I have another question about the Radio Rom. I have the Radio version 1.00.25.03 and I wanted to ask do I need to update/change it ? If it's not necessary, can I skip this step and just update my Rom and not the Radio ?
Thx !

if you don't want to brick your diamond
read.....read...and read some more..before you try to flash
i don't want to see your next post
" help i have killed my diamond"
welcome to the forum and have fun with your new phone

liamhere said:
read.....read...and read some more..before you try to flash
i don't want to see your next post
" help i have killed my diamond"
welcome to the forum and have fun with your new phone
Click to expand...
Click to collapse
read!?! nobody told me i was suppose to read before trying to flash my phone for the first time?!! jk
yeah, just look around at the different tutorial on here, and it should help you to better understand it. I just got my diamond last week, and i can't believe how much i can change on this phone compared to my old S60 v3 phone...

I wouldn't change the radio unless you have issues with reception... But that's me, I'm very conservative compared to most on here when it comes to flashing/changing major aspects of the phone.

I have completed the flashing the Rom and Radio on my Diamond and thank god it didn't brick.
Everything is done now so thank you guys very much for everything.

smashhell said:
I have completed the flashing the Rom and Radio on my Diamond and thank god it didn't brick.
Everything is done now so thank you guys very much for everything.
Click to expand...
Click to collapse
Congrats!